! Started logfile: /scr/pima/bp192a1_uvs/J0217+0144_C_uvs.log on Wed Sep 16 13:28:19 2015
obs /scr/pima/bp192a1_uvs/J0217+0144_C_uva.fits
! Reading UV FITS file: /scr/pima/bp192a1_uvs/J0217+0144_C_uva.fits
! AN table 1: 29 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.780077 visibilities/baseline/integration-bin.
! Found source: J0217+0144
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 8144 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp192a1_uvs/J0217+0144_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.118622Jy  sigma=25.738658
! Fit after  self-cal, rms=0.539658Jy  sigma=12.503839
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.307 mas, bmaj=3.569 mas, bpa=-3.916 degrees
! Estimated noise=0.49807 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.350549 Jy
! Component: 100  -  total flux cleaned = 0.436288 Jy
! Total flux subtracted in 100 components = 0.436288 Jy
! Clean residual min=-0.019707 max=0.035434 Jy/beam
! Clean residual mean=0.000065 rms=0.004724 Jy/beam
! Combined flux in latest and established models = 0.436288 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.436288 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.094024Jy  sigma=2.034777
! Fit after  self-cal, rms=0.093849Jy  sigma=2.032265
! Inverting map 
! Added new window around map position (1.2, -0.9).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0398556 Jy
! Component: 100  -  total flux cleaned = 0.0613488 Jy
! Total flux subtracted in 100 components = 0.0613488 Jy
! Clean residual min=-0.015167 max=0.017714 Jy/beam
! Clean residual mean=0.000029 rms=0.003148 Jy/beam
! Combined flux in latest and established models = 0.497637 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 17 components and 0.497637 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.069921Jy  sigma=1.497480
! Fit after  self-cal, rms=0.069661Jy  sigma=1.492169
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.538 mas, bmaj=3.929 mas, bpa=-3.468 degrees
! Estimated noise=0.348932 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (3.6, 1.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0221668 Jy
! Component: 100  -  total flux cleaned = 0.0361807 Jy
! Component: 150  -  total flux cleaned = 0.0462303 Jy
! Component: 200  -  total flux cleaned = 0.0536506 Jy
! Total flux subtracted in 200 components = 0.0536506 Jy
! Clean residual min=-0.012595 max=0.012038 Jy/beam
! Clean residual mean=-0.000005 rms=0.003084 Jy/beam
! Combined flux in latest and established models = 0.551288 Jy
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 58 components and 0.551288 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.060146Jy  sigma=1.290224
! Fit after  self-cal, rms=0.059605Jy  sigma=1.276313
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.538 x 3.929 at -3.468 degrees (North through East)
! Clean map  min=-0.011884  max=0.45966 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.17     HN        0.97     KP        0.88     
!   LA        1.05     MK        1.08     NL        1.01     OV        0.99     
!   PT        0.86     SC        1.01     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.14     HN        1.00     KP        0.92     
!   LA        1.09     MK        1.00     NL        1.05     OV        1.03     
!   PT        0.94     SC        0.99     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.98     HN        0.99     KP        0.87     
!   LA        1.02     MK        0.91     NL        1.05     OV        0.98     
!   PT        0.95     SC        1.00     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.00     KP        0.94     
!   LA        1.07     MK        1.04     NL        1.11     OV        0.96     
!   PT        0.91     SC        1.02     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.98     HN        1.05     KP        0.92     
!   LA        1.16     MK        1.01     NL        1.07     OV        0.96     
!   PT        1.02     SC        1.04     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.91     HN        0.99     KP        0.91     
!   LA        1.09     MK        1.00     NL        1.07     OV        0.96     
!   PT        0.94     SC        0.97     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.95     HN        1.01     KP        0.93     
!   LA        1.08     MK        0.99     NL        0.98     OV        0.99     
!   PT        0.92     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.059605Jy  sigma=1.276313
! Fit after  self-cal, rms=0.044173Jy  sigma=0.894518
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.544 mas, bmaj=3.948 mas, bpa=-3.319 degrees
! Estimated noise=0.349619 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00541316 Jy
! Component: 100  -  total flux cleaned = 0.00891249 Jy
! Component: 150  -  total flux cleaned = 0.0113521 Jy
! Component: 200  -  total flux cleaned = 0.0123888 Jy
! Total flux subtracted in 200 components = 0.0123888 Jy
! Clean residual min=-0.004309 max=0.004699 Jy/beam
! Clean residual mean=0.000005 rms=0.001119 Jy/beam
! Combined flux in latest and established models = 0.563677 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 80 components and 0.563677 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.043325Jy  sigma=0.876216
! Fit after  self-cal, rms=0.043271Jy  sigma=0.875138
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.043271Jy  sigma=0.875138
! Fit after  self-cal, rms=0.043244Jy  sigma=0.870708
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.541 mas, bmaj=3.941 mas, bpa=-3.321 degrees
! Estimated noise=0.351165 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00353048 Jy
! Component: 100  -  total flux cleaned = 0.00566331 Jy
! Component: 150  -  total flux cleaned = 0.00637468 Jy
! Component: 200  -  total flux cleaned = 0.00687424 Jy
! Total flux subtracted in 200 components = 0.00687424 Jy
! Clean residual min=-0.004211 max=0.004429 Jy/beam
! Clean residual mean=0.000005 rms=0.001075 Jy/beam
! Combined flux in latest and established models = 0.570551 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 97 components and 0.570551 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.042833Jy  sigma=0.864094
! Fit after  self-cal, rms=0.042820Jy  sigma=0.863843
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00061963 Jy
! Component: 100  -  total flux cleaned = 0.000934539 Jy
! Component: 150  -  total flux cleaned = 0.00124895 Jy
! Component: 200  -  total flux cleaned = 0.00145715 Jy
! Total flux subtracted in 200 components = 0.00145715 Jy
! Clean residual min=-0.004335 max=0.004303 Jy/beam
! Clean residual mean=0.000003 rms=0.001062 Jy/beam
! Combined flux in latest and established models = 0.572008 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 108 components and 0.572008 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.042732Jy  sigma=0.862298
! Fit after  self-cal, rms=0.042728Jy  sigma=0.862228
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.042728Jy  sigma=0.862228
! Fit after  self-cal, rms=0.042720Jy  sigma=0.857917
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.538 mas, bmaj=3.936 mas, bpa=-3.33 degrees
! Estimated noise=0.352902 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00293682 Jy
! Component: 100  -  total flux cleaned = 0.00429911 Jy
! Component: 150  -  total flux cleaned = 0.00488984 Jy
! Component: 200  -  total flux cleaned = 0.00519155 Jy
! Total flux subtracted in 200 components = 0.00519155 Jy
! Clean residual min=-0.004156 max=0.004252 Jy/beam
! Clean residual mean=0.000004 rms=0.001049 Jy/beam
! Combined flux in latest and established models = 0.5772 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 115 components and 0.5772 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.042436Jy  sigma=0.854417
! Fit after  self-cal, rms=0.042432Jy  sigma=0.854336
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000189714 Jy
! Component: 100  -  total flux cleaned = 0.000413218 Jy
! Component: 150  -  total flux cleaned = 0.000609448 Jy
! Component: 200  -  total flux cleaned = 0.000760052 Jy
! Total flux subtracted in 200 components = 0.000760052 Jy
! Clean residual min=-0.004219 max=0.004209 Jy/beam
! Clean residual mean=0.000003 rms=0.001042 Jy/beam
! Combined flux in latest and established models = 0.57796 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 126 components and 0.57796 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.042387Jy  sigma=0.853614
! Fit after  self-cal, rms=0.042385Jy  sigma=0.853567
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.042385Jy  sigma=0.853567
! Fit after  self-cal, rms=0.042402Jy  sigma=0.850217
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.671 mas, bmaj=6.154 mas, bpa=3.159 degrees
! Estimated noise=0.449813 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0033855 Jy
! Component: 100  -  total flux cleaned = 0.00455691 Jy
! Component: 150  -  total flux cleaned = 0.00486948 Jy
! Component: 200  -  total flux cleaned = 0.00509009 Jy
! Total flux subtracted in 200 components = 0.00509009 Jy
! Clean residual min=-0.006145 max=0.006619 Jy/beam
! Clean residual mean=0.000005 rms=0.001858 Jy/beam
! Combined flux in latest and established models = 0.58305 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 143 components and 0.58305 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.042216Jy  sigma=0.849306
! Fit after  self-cal, rms=0.042200Jy  sigma=0.848964
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000327927 Jy
! Component: 100  -  total flux cleaned = 0.00045671 Jy
! Component: 150  -  total flux cleaned = 0.000522598 Jy
! Component: 200  -  total flux cleaned = 0.000560567 Jy
! Total flux subtracted in 200 components = 0.000560567 Jy
! Clean residual min=-0.006216 max=0.006519 Jy/beam
! Clean residual mean=0.000004 rms=0.001855 Jy/beam
! Combined flux in latest and established models = 0.58361 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 162 components and 0.58361 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.042198Jy  sigma=0.848995
! Fit after  self-cal, rms=0.042194Jy  sigma=0.848941
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.535 mas, bmaj=3.931 mas, bpa=-3.34 degrees
! Estimated noise=0.354547 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.535 x 3.931 at -3.34 degrees (North through East)
! Clean map  min=-0.0041062  max=0.46633 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.305 mas, bmaj=3.574 mas, bpa=-3.909 degrees
! Estimated noise=0.511253 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.355192 Jy
! Component: 100  -  total flux cleaned = 0.443756 Jy
! Component: 150  -  total flux cleaned = 0.485019 Jy
! Component: 200  -  total flux cleaned = 0.507644 Jy
! Total flux subtracted in 200 components = 0.507644 Jy
! Clean residual min=-0.008043 max=0.011737 Jy/beam
! Clean residual mean=0.000043 rms=0.002242 Jy/beam
! Combined flux in latest and established models = 0.507644 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.507644 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.535 mas, bmaj=3.931 mas, bpa=-3.34 degrees
! Estimated noise=0.354547 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0219288 Jy
! Component: 100  -  total flux cleaned = 0.0362601 Jy
! Component: 150  -  total flux cleaned = 0.0462599 Jy
! Component: 200  -  total flux cleaned = 0.0534097 Jy
! Total flux subtracted in 200 components = 0.0534097 Jy
! Clean residual min=-0.004357 max=0.005457 Jy/beam
! Clean residual mean=0.000025 rms=0.001329 Jy/beam
! Combined flux in latest and established models = 0.561054 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 53 components and 0.561054 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.671 mas, bmaj=6.154 mas, bpa=3.159 degrees
! Estimated noise=0.449813 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00888229 Jy
! Component: 100  -  total flux cleaned = 0.013881 Jy
! Component: 150  -  total flux cleaned = 0.0169188 Jy
! Component: 200  -  total flux cleaned = 0.0188538 Jy
! Total flux subtracted in 200 components = 0.0188538 Jy
! Clean residual min=-0.006083 max=0.006802 Jy/beam
! Clean residual mean=0.000012 rms=0.001869 Jy/beam
! Combined flux in latest and established models = 0.579908 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00126931 Jy
! Component: 100  -  total flux cleaned = 0.00211267 Jy
! Component: 150  -  total flux cleaned = 0.00247525 Jy
! Component: 200  -  total flux cleaned = 0.00262953 Jy
! Total flux subtracted in 200 components = 0.00262953 Jy
! Clean residual min=-0.006210 max=0.006583 Jy/beam
! Clean residual mean=0.000006 rms=0.001855 Jy/beam
! Combined flux in latest and established models = 0.582537 Jy
! Adding 72 model components to the UV plane model.
! The established model now contains 112 components and 0.582538 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.535 mas, bmaj=3.931 mas, bpa=-3.34 degrees
! Estimated noise=0.354547 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000271043 Jy
! Component: 100  -  total flux cleaned = -0.00026768 Jy
! Component: 150  -  total flux cleaned = -0.000317197 Jy
! Component: 200  -  total flux cleaned = -0.000270049 Jy
! Total flux subtracted in 200 components = -0.000270049 Jy
! Clean residual min=-0.004013 max=0.004243 Jy/beam
! Clean residual mean=0.000003 rms=0.001047 Jy/beam
! Combined flux in latest and established models = 0.582268 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 124 components and 0.582268 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.042291Jy  sigma=0.850573
! Fit after  self-cal, rms=0.042242Jy  sigma=0.849486
wmodel /scr/pima/bp192a1_uvs/J0217+0144_C_map.mod
! Writing 124 model components to file: /scr/pima/bp192a1_uvs/J0217+0144_C_map.mod
wobs /scr/pima/bp192a1_uvs/J0217+0144_C_uvs.fits
! Writing UV FITS file: /scr/pima/bp192a1_uvs/J0217+0144_C_uvs.fits
wwins /scr/pima/bp192a1_uvs/J0217+0144_C_map.win
! wwins: Wrote 3 windows to /scr/pima/bp192a1_uvs/J0217+0144_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00062246 Jy
! Component: 100  -  total flux cleaned = -0.00125415 Jy
! Component: 150  -  total flux cleaned = -0.00157954 Jy
! Component: 200  -  total flux cleaned = -0.00188734 Jy
! Component: 250  -  total flux cleaned = -0.00206204 Jy
! Component: 300  -  total flux cleaned = -0.00206153 Jy
! Component: 350  -  total flux cleaned = -0.00195481 Jy
! Component: 400  -  total flux cleaned = -0.00179936 Jy
! Component: 450  -  total flux cleaned = -0.00160109 Jy
! Component: 500  -  total flux cleaned = -0.00164936 Jy
! Component: 550  -  total flux cleaned = -0.00164858 Jy
! Component: 600  -  total flux cleaned = -0.00151331 Jy
! Component: 650  -  total flux cleaned = -0.00151359 Jy
! Component: 700  -  total flux cleaned = -0.0014276 Jy
! Component: 750  -  total flux cleaned = -0.00130336 Jy
! Component: 800  -  total flux cleaned = -0.00122331 Jy
! Component: 850  -  total flux cleaned = -0.00110562 Jy
! Component: 900  -  total flux cleaned = -0.00114434 Jy
! Component: 950  -  total flux cleaned = -0.000992524 Jy
! Component: 1000  -  total flux cleaned = -0.000808368 Jy
! Component: 1050  -  total flux cleaned = -0.000808688 Jy
! Component: 1100  -  total flux cleaned = -0.000666819 Jy
! Component: 1150  -  total flux cleaned = -0.000563228 Jy
! Component: 1200  -  total flux cleaned = -0.000461617 Jy
! Component: 1250  -  total flux cleaned = -0.00032875 Jy
! Component: 1300  -  total flux cleaned = -0.000328971 Jy
! Component: 1350  -  total flux cleaned = -0.000167924 Jy
! Component: 1400  -  total flux cleaned = -7.31625e-05 Jy
! Component: 1450  -  total flux cleaned = 8.22889e-05 Jy
! Component: 1500  -  total flux cleaned = 0.000235387 Jy
! Component: 1550  -  total flux cleaned = 0.000416148 Jy
! Component: 1600  -  total flux cleaned = 0.000505468 Jy
! Component: 1650  -  total flux cleaned = 0.000710542 Jy
! Component: 1700  -  total flux cleaned = 0.000739422 Jy
! Component: 1750  -  total flux cleaned = 0.000882051 Jy
! Component: 1800  -  total flux cleaned = 0.000966649 Jy
! Component: 1850  -  total flux cleaned = 0.00099467 Jy
! Component: 1900  -  total flux cleaned = 0.00107675 Jy
! Component: 1950  -  total flux cleaned = 0.00110348 Jy
! Component: 2000  -  total flux cleaned = 0.00105002 Jy
! Component: 2050  -  total flux cleaned = 0.00118223 Jy
! Component: 2100  -  total flux cleaned = 0.00120834 Jy
! Component: 2150  -  total flux cleaned = 0.00125985 Jy
! Component: 2200  -  total flux cleaned = 0.0013104 Jy
! Component: 2250  -  total flux cleaned = 0.00131054 Jy
! Component: 2300  -  total flux cleaned = 0.00133544 Jy
! Component: 2350  -  total flux cleaned = 0.00138469 Jy
! Component: 2400  -  total flux cleaned = 0.00133566 Jy
! Component: 2450  -  total flux cleaned = 0.00138389 Jy
! Component: 2500  -  total flux cleaned = 0.00140775 Jy
! Component: 2550  -  total flux cleaned = 0.00138385 Jy
! Component: 2600  -  total flux cleaned = 0.00138389 Jy
! Component: 2650  -  total flux cleaned = 0.00143034 Jy
! Component: 2700  -  total flux cleaned = 0.00138431 Jy
! Component: 2750  -  total flux cleaned = 0.00140714 Jy
! Component: 2800  -  total flux cleaned = 0.00142981 Jy
! Component: 2850  -  total flux cleaned = 0.00142994 Jy
! Component: 2900  -  total flux cleaned = 0.00147429 Jy
! Component: 2950  -  total flux cleaned = 0.0014524 Jy
! Component: 3000  -  total flux cleaned = 0.00153978 Jy
! Component: 3050  -  total flux cleaned = 0.00158283 Jy
! Component: 3100  -  total flux cleaned = 0.00160417 Jy
! Component: 3150  -  total flux cleaned = 0.00160419 Jy
! Component: 3200  -  total flux cleaned = 0.00168875 Jy
! Component: 3250  -  total flux cleaned = 0.00175188 Jy
! Component: 3300  -  total flux cleaned = 0.00187702 Jy
! Component: 3350  -  total flux cleaned = 0.00191839 Jy
! Component: 3400  -  total flux cleaned = 0.00204188 Jy
! Component: 3450  -  total flux cleaned = 0.00206223 Jy
! Component: 3500  -  total flux cleaned = 0.00214358 Jy
! Component: 3550  -  total flux cleaned = 0.00214354 Jy
! Component: 3600  -  total flux cleaned = 0.00218373 Jy
! Component: 3650  -  total flux cleaned = 0.00228359 Jy
! Component: 3700  -  total flux cleaned = 0.00238288 Jy
! Component: 3750  -  total flux cleaned = 0.00240258 Jy
! Component: 3800  -  total flux cleaned = 0.00255939 Jy
! Component: 3850  -  total flux cleaned = 0.00259828 Jy
! Component: 3900  -  total flux cleaned = 0.00269529 Jy
! Component: 3950  -  total flux cleaned = 0.00283026 Jy
! Component: 4000  -  total flux cleaned = 0.0028879 Jy
! Component: 4050  -  total flux cleaned = 0.00305983 Jy
! Total flux subtracted in 4096 components = 0.00304094 Jy
! Clean residual min=-0.001090 max=0.001029 Jy/beam
! Clean residual mean=0.000004 rms=0.000336 Jy/beam
! Combined flux in latest and established models = 0.585308 Jy
keep
! Adding 331 model components to the UV plane model.
! The established model now contains 455 components and 0.585308 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bp192a1_uvs/J0217+0144_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.535 x 3.931 at -3.34 degrees (North through East)
! Clean map  min=-0.0023742  max=0.46899 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp192a1_uvs/J0217+0144_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.468993 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000330432 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.211367 0.211367 0.422734 0.845467 1.69093 3.38187 6.76374 13.5275 27.055 54.1099
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.468 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1419.33 
quit
! Quitting program
! Log file /scr/pima/bp192a1_uvs/J0217+0144_C_uvs.log closed on Wed Sep 16 13:28:24 2015