! Started logfile: /scr/pima/bp192a1_uvs/J0205-1109_C_uvs.log on Wed Sep 16 13:27:53 2015 obs /scr/pima/bp192a1_uvs/J0205-1109_C_uva.fits ! Reading UV FITS file: /scr/pima/bp192a1_uvs/J0205-1109_C_uva.fits ! AN table 1: 19 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.777778 visibilities/baseline/integration-bin. ! Found source: J0205-1109 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 4.128e+09 3.2e+07 1 3.2e+07 ! 02 2 4.16e+09 3.2e+07 1 3.2e+07 ! 03 3 4.192e+09 3.2e+07 1 3.2e+07 ! 04 4 4.224e+09 3.2e+07 1 3.2e+07 ! 05 5 4.416e+09 3.2e+07 1 3.2e+07 ! 06 6 4.512e+09 3.2e+07 1 3.2e+07 ! 07 7 4.544e+09 3.2e+07 1 3.2e+07 ! 08 8 4.576e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 4256 visibilities. select RR ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.3 print "taper_size =", taper_size ! taper_size = 40 ![@/home/lpetrov/bin/01_muppet /scr/pima/bp192a1_uvs/J0205-1109_C] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=1.001750Jy sigma=23.705175 ! Fit after self-cal, rms=0.930921Jy sigma=22.026821 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.105 mas, bmaj=6.643 mas, bpa=18.51 degrees ! Estimated noise=0.581033 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0467965 Jy ! Component: 100 - total flux cleaned = 0.0685891 Jy ! Total flux subtracted in 100 components = 0.0685891 Jy ! Clean residual min=-0.006797 max=0.012291 Jy/beam ! Clean residual mean=0.000017 rms=0.002996 Jy/beam ! Combined flux in latest and established models = 0.068589 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.068589 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.059003Jy sigma=1.349855 ! Fit after self-cal, rms=0.058601Jy sigma=1.340779 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.538 mas, bmaj=7.086 mas, bpa=16.61 degrees ! Estimated noise=0.469156 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0250009 Jy ! Component: 100 - total flux cleaned = 0.041272 Jy ! Component: 150 - total flux cleaned = 0.0527026 Jy ! Component: 200 - total flux cleaned = 0.0610294 Jy ! Total flux subtracted in 200 components = 0.0610294 Jy ! Clean residual min=-0.008822 max=0.010962 Jy/beam ! Clean residual mean=0.000019 rms=0.003903 Jy/beam ! Combined flux in latest and established models = 0.129618 Jy ! Performing phase self-cal ! Adding 78 model components to the UV plane model. ! The established model now contains 109 components and 0.129618 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.044324Jy sigma=0.992547 ! Fit after self-cal, rms=0.044178Jy sigma=0.988827 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.538 x 7.086 at 16.61 degrees (North through East) ! Clean map min=-0.0085619 max=0.059149 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Fit before self-cal, rms=0.044178Jy sigma=0.988827 ! Fit after self-cal, rms=0.044178Jy sigma=0.988827 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.538 mas, bmaj=7.086 mas, bpa=16.61 degrees ! Estimated noise=0.469156 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00641924 Jy ! Component: 100 - total flux cleaned = 0.010958 Jy ! Component: 150 - total flux cleaned = 0.0142906 Jy ! Component: 200 - total flux cleaned = 0.0167502 Jy ! Total flux subtracted in 200 components = 0.0167502 Jy ! Clean residual min=-0.008486 max=0.010979 Jy/beam ! Clean residual mean=0.000014 rms=0.003621 Jy/beam ! Combined flux in latest and established models = 0.146369 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 114 components and 0.146369 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.042885Jy sigma=0.960462 ! Fit after self-cal, rms=0.042878Jy sigma=0.959936 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.042878Jy sigma=0.959936 ! Fit after self-cal, rms=0.042878Jy sigma=0.959936 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.538 mas, bmaj=7.086 mas, bpa=16.61 degrees ! Estimated noise=0.469156 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00200256 Jy ! Component: 100 - total flux cleaned = 0.00311202 Jy ! Component: 150 - total flux cleaned = 0.00353131 Jy ! Component: 200 - total flux cleaned = 0.00383176 Jy ! Total flux subtracted in 200 components = 0.00383176 Jy ! Clean residual min=-0.008524 max=0.010913 Jy/beam ! Clean residual mean=0.000013 rms=0.003576 Jy/beam ! Combined flux in latest and established models = 0.1502 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 120 components and 0.1502 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.042735Jy sigma=0.956962 ! Fit after self-cal, rms=0.042737Jy sigma=0.956870 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000362386 Jy ! Component: 100 - total flux cleaned = 0.000516834 Jy ! Component: 150 - total flux cleaned = 0.000698263 Jy ! Component: 200 - total flux cleaned = 0.000872758 Jy ! Total flux subtracted in 200 components = 0.000872758 Jy ! Clean residual min=-0.008623 max=0.010925 Jy/beam ! Clean residual mean=0.000013 rms=0.003561 Jy/beam ! Combined flux in latest and established models = 0.151073 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 128 components and 0.151073 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.042692Jy sigma=0.955235 ! Fit after self-cal, rms=0.042691Jy sigma=0.955198 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.042691Jy sigma=0.955198 ! Fit after self-cal, rms=0.042691Jy sigma=0.955198 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.538 mas, bmaj=7.086 mas, bpa=16.61 degrees ! Estimated noise=0.469156 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.82563e-05 Jy ! Component: 100 - total flux cleaned = 0.000230778 Jy ! Component: 150 - total flux cleaned = 0.000358411 Jy ! Component: 200 - total flux cleaned = 0.000482978 Jy ! Total flux subtracted in 200 components = 0.000482978 Jy ! Clean residual min=-0.008674 max=0.010926 Jy/beam ! Clean residual mean=0.000013 rms=0.003552 Jy/beam ! Combined flux in latest and established models = 0.151556 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 133 components and 0.151556 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.042658Jy sigma=0.953945 ! Fit after self-cal, rms=0.042655Jy sigma=0.953912 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.30702e-05 Jy ! Component: 100 - total flux cleaned = 0.000174207 Jy ! Component: 150 - total flux cleaned = 0.00026218 Jy ! Component: 200 - total flux cleaned = 0.000348914 Jy ! Total flux subtracted in 200 components = 0.000348914 Jy ! Clean residual min=-0.008695 max=0.010910 Jy/beam ! Clean residual mean=0.000013 rms=0.003544 Jy/beam ! Combined flux in latest and established models = 0.151905 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 137 components and 0.151905 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.042628Jy sigma=0.952855 ! Fit after self-cal, rms=0.042625Jy sigma=0.952826 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.042625Jy sigma=0.952826 ! Fit after self-cal, rms=0.042625Jy sigma=0.952826 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.309 mas, bmaj=8.486 mas, bpa=5.533 degrees ! Estimated noise=0.515256 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00249298 Jy ! Component: 100 - total flux cleaned = 0.00306333 Jy ! Component: 150 - total flux cleaned = 0.0036175 Jy ! Component: 200 - total flux cleaned = 0.00400246 Jy ! Total flux subtracted in 200 components = 0.00400246 Jy ! Clean residual min=-0.011753 max=0.015139 Jy/beam ! Clean residual mean=0.000019 rms=0.005056 Jy/beam ! Combined flux in latest and established models = 0.155908 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 144 components and 0.155907 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.042618Jy sigma=0.953389 ! Fit after self-cal, rms=0.042608Jy sigma=0.953100 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000195215 Jy ! Component: 100 - total flux cleaned = 0.000538376 Jy ! Component: 150 - total flux cleaned = 0.000761427 Jy ! Component: 200 - total flux cleaned = 0.000928415 Jy ! Total flux subtracted in 200 components = 0.000928415 Jy ! Clean residual min=-0.011781 max=0.015198 Jy/beam ! Clean residual mean=0.000019 rms=0.005026 Jy/beam ! Combined flux in latest and established models = 0.156836 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 148 components and 0.156836 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.042660Jy sigma=0.953311 ! Fit after self-cal, rms=0.042654Jy sigma=0.953143 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.538 mas, bmaj=7.086 mas, bpa=16.61 degrees ! Estimated noise=0.469156 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.538 x 7.086 at 16.61 degrees (North through East) ! Clean map min=-0.0089929 max=0.056067 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.105 mas, bmaj=6.643 mas, bpa=18.51 degrees ! Estimated noise=0.581033 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0466163 Jy ! Component: 100 - total flux cleaned = 0.0692208 Jy ! Component: 150 - total flux cleaned = 0.0841498 Jy ! Component: 200 - total flux cleaned = 0.0951922 Jy ! Total flux subtracted in 200 components = 0.0951922 Jy ! Clean residual min=-0.006506 max=0.009121 Jy/beam ! Clean residual mean=0.000011 rms=0.002344 Jy/beam ! Combined flux in latest and established models = 0.0951923 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 61 model components to the UV plane model. ! The established model now contains 61 components and 0.0951923 Jy ! Inverting map and beam ! Estimated beam: bmin=2.538 mas, bmaj=7.086 mas, bpa=16.61 degrees ! Estimated noise=0.469156 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0164693 Jy ! Component: 100 - total flux cleaned = 0.0277603 Jy ! Component: 150 - total flux cleaned = 0.0359069 Jy ! Component: 200 - total flux cleaned = 0.0418554 Jy ! Total flux subtracted in 200 components = 0.0418554 Jy ! Clean residual min=-0.008236 max=0.011030 Jy/beam ! Clean residual mean=0.000017 rms=0.003740 Jy/beam ! Combined flux in latest and established models = 0.137048 Jy ! Adding 71 model components to the UV plane model. ! The established model now contains 121 components and 0.137048 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.309 mas, bmaj=8.486 mas, bpa=5.533 degrees ! Estimated noise=0.515256 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00711316 Jy ! Component: 100 - total flux cleaned = 0.0118094 Jy ! Component: 150 - total flux cleaned = 0.0149687 Jy ! Component: 200 - total flux cleaned = 0.0168109 Jy ! Total flux subtracted in 200 components = 0.0168109 Jy ! Clean residual min=-0.011841 max=0.015151 Jy/beam ! Clean residual mean=0.000019 rms=0.005097 Jy/beam ! Combined flux in latest and established models = 0.153859 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0006282 Jy ! Component: 100 - total flux cleaned = 0.00118331 Jy ! Component: 150 - total flux cleaned = 0.00162304 Jy ! Component: 200 - total flux cleaned = 0.00201632 Jy ! Total flux subtracted in 200 components = 0.00201632 Jy ! Clean residual min=-0.011783 max=0.015191 Jy/beam ! Clean residual mean=0.000019 rms=0.005051 Jy/beam ! Combined flux in latest and established models = 0.155875 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 131 components and 0.155875 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.538 mas, bmaj=7.086 mas, bpa=16.61 degrees ! Estimated noise=0.469156 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00110234 Jy ! Component: 100 - total flux cleaned = -0.00152247 Jy ! Component: 150 - total flux cleaned = -0.00174236 Jy ! Component: 200 - total flux cleaned = -0.00192778 Jy ! Total flux subtracted in 200 components = -0.00192778 Jy ! Clean residual min=-0.008954 max=0.011112 Jy/beam ! Clean residual mean=0.000013 rms=0.003521 Jy/beam ! Combined flux in latest and established models = 0.153947 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 143 components and 0.153947 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.042739Jy sigma=0.954534 ! Fit after self-cal, rms=0.042728Jy sigma=0.954339 wmodel /scr/pima/bp192a1_uvs/J0205-1109_C_map.mod ! Writing 143 model components to file: /scr/pima/bp192a1_uvs/J0205-1109_C_map.mod wobs /scr/pima/bp192a1_uvs/J0205-1109_C_uvs.fits ! Writing UV FITS file: /scr/pima/bp192a1_uvs/J0205-1109_C_uvs.fits wwins /scr/pima/bp192a1_uvs/J0205-1109_C_map.win ! wwins: Wrote 1 windows to /scr/pima/bp192a1_uvs/J0205-1109_C_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00495642 Jy ! Component: 100 - total flux cleaned = 0.00868855 Jy ! Component: 150 - total flux cleaned = 0.0105198 Jy ! Component: 200 - total flux cleaned = 0.0116429 Jy ! Component: 250 - total flux cleaned = 0.0122951 Jy ! Component: 300 - total flux cleaned = 0.0132756 Jy ! Component: 350 - total flux cleaned = 0.0141959 Jy ! Component: 400 - total flux cleaned = 0.0152823 Jy ! Component: 450 - total flux cleaned = 0.0162061 Jy ! Component: 500 - total flux cleaned = 0.016989 Jy ! Component: 550 - total flux cleaned = 0.0175441 Jy ! Component: 600 - total flux cleaned = 0.0180731 Jy ! Component: 650 - total flux cleaned = 0.018743 Jy ! Component: 700 - total flux cleaned = 0.0194651 Jy ! Component: 750 - total flux cleaned = 0.0203886 Jy ! Component: 800 - total flux cleaned = 0.0209062 Jy ! Component: 850 - total flux cleaned = 0.0216181 Jy ! Component: 900 - total flux cleaned = 0.0222338 Jy ! Component: 950 - total flux cleaned = 0.0228296 Jy ! Component: 1000 - total flux cleaned = 0.0234697 Jy ! Component: 1050 - total flux cleaned = 0.0242104 Jy ! Component: 1100 - total flux cleaned = 0.0248681 Jy ! Component: 1150 - total flux cleaned = 0.0255046 Jy ! Component: 1200 - total flux cleaned = 0.0260105 Jy ! Component: 1250 - total flux cleaned = 0.0266104 Jy ! Component: 1300 - total flux cleaned = 0.0270872 Jy ! Component: 1350 - total flux cleaned = 0.0275511 Jy ! Component: 1400 - total flux cleaned = 0.0279513 Jy ! Component: 1450 - total flux cleaned = 0.0282451 Jy ! Component: 1500 - total flux cleaned = 0.0285795 Jy ! Component: 1550 - total flux cleaned = 0.0289977 Jy ! Component: 1600 - total flux cleaned = 0.0293128 Jy ! Component: 1650 - total flux cleaned = 0.0295769 Jy ! Component: 1700 - total flux cleaned = 0.0298342 Jy ! Component: 1750 - total flux cleaned = 0.0302506 Jy ! Component: 1800 - total flux cleaned = 0.030372 Jy ! Component: 1850 - total flux cleaned = 0.0307318 Jy ! Component: 1900 - total flux cleaned = 0.0310452 Jy ! Component: 1950 - total flux cleaned = 0.0313517 Jy ! Component: 2000 - total flux cleaned = 0.0318013 Jy ! Component: 2050 - total flux cleaned = 0.0321681 Jy ! Component: 2100 - total flux cleaned = 0.0325277 Jy ! Component: 2150 - total flux cleaned = 0.0330224 Jy ! Component: 2200 - total flux cleaned = 0.0334382 Jy ! Component: 2250 - total flux cleaned = 0.0339838 Jy ! Component: 2300 - total flux cleaned = 0.0344868 Jy ! Component: 2350 - total flux cleaned = 0.03485 Jy ! Component: 2400 - total flux cleaned = 0.0352406 Jy ! Component: 2450 - total flux cleaned = 0.0356574 Jy ! Component: 2500 - total flux cleaned = 0.0360053 Jy ! Component: 2550 - total flux cleaned = 0.0364108 Jy ! Component: 2600 - total flux cleaned = 0.0368111 Jy ! Component: 2650 - total flux cleaned = 0.0372061 Jy ! Component: 2700 - total flux cleaned = 0.0376259 Jy ! Component: 2750 - total flux cleaned = 0.0379811 Jy ! Component: 2800 - total flux cleaned = 0.0383322 Jy ! Component: 2850 - total flux cleaned = 0.0387081 Jy ! Component: 2900 - total flux cleaned = 0.0389652 Jy ! Component: 2950 - total flux cleaned = 0.0392477 Jy ! Component: 3000 - total flux cleaned = 0.0394155 Jy ! Component: 3050 - total flux cleaned = 0.0396097 Jy ! Component: 3100 - total flux cleaned = 0.0398023 Jy ! Component: 3150 - total flux cleaned = 0.0399931 Jy ! Component: 3200 - total flux cleaned = 0.0401828 Jy ! Component: 3250 - total flux cleaned = 0.0404245 Jy ! Component: 3300 - total flux cleaned = 0.0405844 Jy ! Component: 3350 - total flux cleaned = 0.0406902 Jy ! Component: 3400 - total flux cleaned = 0.0408482 Jy ! Component: 3450 - total flux cleaned = 0.0410312 Jy ! Component: 3500 - total flux cleaned = 0.041161 Jy ! Component: 3550 - total flux cleaned = 0.0412643 Jy ! Component: 3600 - total flux cleaned = 0.041393 Jy ! Component: 3650 - total flux cleaned = 0.0415974 Jy ! Component: 3700 - total flux cleaned = 0.0416736 Jy ! Component: 3750 - total flux cleaned = 0.0418508 Jy ! Component: 3800 - total flux cleaned = 0.0419768 Jy ! Component: 3850 - total flux cleaned = 0.0421022 Jy ! Component: 3900 - total flux cleaned = 0.0422518 Jy ! Component: 3950 - total flux cleaned = 0.0423509 Jy ! Component: 4000 - total flux cleaned = 0.0425236 Jy ! Component: 4050 - total flux cleaned = 0.0426463 Jy ! Total flux subtracted in 4096 components = 0.0427685 Jy ! Clean residual min=-0.001290 max=0.001446 Jy/beam ! Clean residual mean=0.000013 rms=0.000476 Jy/beam ! Combined flux in latest and established models = 0.196716 Jy keep ! Adding 652 model components to the UV plane model. ! The established model now contains 795 components and 0.196716 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/bp192a1_uvs/J0205-1109_C\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.538 x 7.086 at 16.61 degrees (North through East) ! Clean map min=-0.0029993 max=0.055918 Jy/beam ! Writing clean map to FITS file: /scr/pima/bp192a1_uvs/J0205-1109_C_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0559179 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000372972 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.001 2.001 4.002 8.004 16.008 32.016 64.032 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.055 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 149.925 quit ! Quitting program ! Log file /scr/pima/bp192a1_uvs/J0205-1109_C_uvs.log closed on Wed Sep 16 13:27:57 2015