! Started logfile: /scr/pima/bp192a1_uvs/J0201+2933_C_uvs.log on Wed Sep 16 13:27:49 2015
obs /scr/pima/bp192a1_uvs/J0201+2933_C_uva.fits
! Reading UV FITS file: /scr/pima/bp192a1_uvs/J0201+2933_C_uva.fits
! AN table 1: 32 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.55 visibilities/baseline/integration-bin.
! Found source: J0201+2933
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 6336 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp192a1_uvs/J0201+2933_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 92 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 92 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 92 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 92 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 92 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 92 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 92 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 92 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.000975Jy  sigma=25.844954
! Fit after  self-cal, rms=0.985611Jy  sigma=25.567017
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.56 mas, bmaj=3.834 mas, bpa=-1.808 degrees
! Estimated noise=0.551323 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0104619 Jy
! Component: 100  -  total flux cleaned = 0.0127667 Jy
! Total flux subtracted in 100 components = 0.0127667 Jy
! Clean residual min=-0.001980 max=0.001921 Jy/beam
! Clean residual mean=-0.000000 rms=0.000510 Jy/beam
! Combined flux in latest and established models = 0.0127667 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.0127667 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038453Jy  sigma=0.714607
! Fit after  self-cal, rms=0.037056Jy  sigma=0.666080
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00412163 Jy
! Component: 100  -  total flux cleaned = 0.00450512 Jy
! Total flux subtracted in 100 components = 0.00450512 Jy
! Clean residual min=-0.001740 max=0.002105 Jy/beam
! Clean residual mean=-0.000000 rms=0.000466 Jy/beam
! Combined flux in latest and established models = 0.0172718 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 9 components and 0.0172718 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036510Jy  sigma=0.654668
! Fit after  self-cal, rms=0.036495Jy  sigma=0.654304
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.832 mas, bmaj=4.077 mas, bpa=0.5682 degrees
! Estimated noise=0.352894 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000436574 Jy
! Component: 100  -  total flux cleaned = 0.000582854 Jy
! Component: 150  -  total flux cleaned = 0.000669028 Jy
! Component: 200  -  total flux cleaned = 0.000679779 Jy
! Total flux subtracted in 200 components = 0.000679779 Jy
! Clean residual min=-0.001126 max=0.001197 Jy/beam
! Clean residual mean=-0.000000 rms=0.000291 Jy/beam
! Combined flux in latest and established models = 0.0179516 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 16 components and 0.0179516 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036468Jy  sigma=0.654045
! Fit after  self-cal, rms=0.036462Jy  sigma=0.653919
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.832 x 4.077 at 0.5682 degrees (North through East)
! Clean map  min=-0.0011006  max=0.017894 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.98     HN        0.97     KP        0.89     
!   LA        1.12     MK        0.93     NL        0.98     OV        1.05     
!   PT        0.89     SC        0.98     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.09     HN        0.99     KP        0.95     
!   LA        1.05     MK        0.98     NL        1.02     OV        0.88     
!   PT        1.06     SC        0.90     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.036462Jy  sigma=0.653919
! Fit after  self-cal, rms=0.036325Jy  sigma=0.653784
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.825 mas, bmaj=4.08 mas, bpa=0.5036 degrees
! Estimated noise=0.352093 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000115308 Jy
! Component: 100  -  total flux cleaned = 9.37906e-05 Jy
! Component: 150  -  total flux cleaned = 9.34443e-05 Jy
! Component: 200  -  total flux cleaned = 9.25754e-05 Jy
! Total flux subtracted in 200 components = 9.25754e-05 Jy
! Clean residual min=-0.001075 max=0.001207 Jy/beam
! Clean residual mean=-0.000000 rms=0.000283 Jy/beam
! Combined flux in latest and established models = 0.0180441 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 19 components and 0.0180441 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036317Jy  sigma=0.653566
! Fit after  self-cal, rms=0.036312Jy  sigma=0.653293
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036312Jy  sigma=0.653293
! Fit after  self-cal, rms=0.036325Jy  sigma=0.653257
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.825 mas, bmaj=4.076 mas, bpa=0.5945 degrees
! Estimated noise=0.351691 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.19259e-05 Jy
! Component: 100  -  total flux cleaned = 3.26818e-05 Jy
! Component: 150  -  total flux cleaned = 3.23535e-05 Jy
! Component: 200  -  total flux cleaned = 4.11175e-05 Jy
! Total flux subtracted in 200 components = 4.11175e-05 Jy
! Clean residual min=-0.001087 max=0.001184 Jy/beam
! Clean residual mean=-0.000000 rms=0.000278 Jy/beam
! Combined flux in latest and established models = 0.0180853 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 21 components and 0.0180853 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036317Jy  sigma=0.653093
! Fit after  self-cal, rms=0.036310Jy  sigma=0.652930
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-43.2, -62.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00111051 Jy
! Component: 100  -  total flux cleaned = 0.00161247 Jy
! Component: 150  -  total flux cleaned = 0.00174066 Jy
! Component: 200  -  total flux cleaned = 0.00180736 Jy
! Total flux subtracted in 200 components = 0.00180736 Jy
! Clean residual min=-0.000983 max=0.001015 Jy/beam
! Clean residual mean=-0.000000 rms=0.000257 Jy/beam
! Combined flux in latest and established models = 0.0198926 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 38 components and 0.0198926 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036270Jy  sigma=0.651706
! Fit after  self-cal, rms=0.036251Jy  sigma=0.651360
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036251Jy  sigma=0.651360
! Fit after  self-cal, rms=0.036253Jy  sigma=0.650996
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.826 mas, bmaj=4.075 mas, bpa=0.591 degrees
! Estimated noise=0.351927 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000545551 Jy
! Component: 100  -  total flux cleaned = 0.000565551 Jy
! Component: 150  -  total flux cleaned = 0.000514869 Jy
! Component: 200  -  total flux cleaned = 0.000502721 Jy
! Total flux subtracted in 200 components = 0.000502721 Jy
! Clean residual min=-0.000972 max=0.000990 Jy/beam
! Clean residual mean=-0.000001 rms=0.000259 Jy/beam
! Combined flux in latest and established models = 0.0203953 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 42 components and 0.0203953 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036235Jy  sigma=0.650624
! Fit after  self-cal, rms=0.036241Jy  sigma=0.650269
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000209101 Jy
! Component: 100  -  total flux cleaned = 0.000125233 Jy
! Component: 150  -  total flux cleaned = 7.72094e-05 Jy
! Component: 200  -  total flux cleaned = 7.7328e-05 Jy
! Total flux subtracted in 200 components = 7.7328e-05 Jy
! Clean residual min=-0.000977 max=0.001008 Jy/beam
! Clean residual mean=-0.000001 rms=0.000261 Jy/beam
! Combined flux in latest and established models = 0.0204727 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 46 components and 0.0204727 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036225Jy  sigma=0.650010
! Fit after  self-cal, rms=0.036214Jy  sigma=0.649867
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036214Jy  sigma=0.649867
! Fit after  self-cal, rms=0.036579Jy  sigma=0.649466
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.841 mas, bmaj=5.142 mas, bpa=0.555 degrees
! Estimated noise=0.423889 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000349475 Jy
! Component: 100  -  total flux cleaned = 0.000450199 Jy
! Component: 150  -  total flux cleaned = 0.000450638 Jy
! Component: 200  -  total flux cleaned = 0.00045097 Jy
! Total flux subtracted in 200 components = 0.00045097 Jy
! Clean residual min=-0.001009 max=0.000971 Jy/beam
! Clean residual mean=-0.000001 rms=0.000310 Jy/beam
! Combined flux in latest and established models = 0.0209236 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 55 components and 0.0209236 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036567Jy  sigma=0.649359
! Fit after  self-cal, rms=0.036570Jy  sigma=0.649118
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.19617e-05 Jy
! Component: 100  -  total flux cleaned = 8.53318e-05 Jy
! Component: 150  -  total flux cleaned = 7.52706e-05 Jy
! Component: 200  -  total flux cleaned = 0.000102716 Jy
! Total flux subtracted in 200 components = 0.000102716 Jy
! Clean residual min=-0.000970 max=0.000990 Jy/beam
! Clean residual mean=-0.000001 rms=0.000311 Jy/beam
! Combined flux in latest and established models = 0.0210264 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 61 components and 0.0210264 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036563Jy  sigma=0.649024
! Fit after  self-cal, rms=0.036561Jy  sigma=0.648970
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.826 mas, bmaj=4.084 mas, bpa=0.4254 degrees
! Estimated noise=0.354677 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.826 x 4.084 at 0.4254 degrees (North through East)
! Clean map  min=-0.0019  max=0.01785 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.558 mas, bmaj=3.85 mas, bpa=-1.979 degrees
! Estimated noise=0.559789 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0137843 Jy
! Component: 100  -  total flux cleaned = 0.0165475 Jy
! Component: 150  -  total flux cleaned = 0.0177007 Jy
! Component: 200  -  total flux cleaned = 0.0185703 Jy
! Total flux subtracted in 200 components = 0.0185703 Jy
! Clean residual min=-0.001839 max=0.001973 Jy/beam
! Clean residual mean=-0.000000 rms=0.000467 Jy/beam
! Combined flux in latest and established models = 0.0185703 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.0185703 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.826 mas, bmaj=4.084 mas, bpa=0.4254 degrees
! Estimated noise=0.354677 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0013174 Jy
! Component: 100  -  total flux cleaned = 0.001966 Jy
! Component: 150  -  total flux cleaned = 0.00232537 Jy
! Component: 200  -  total flux cleaned = 0.00232526 Jy
! Total flux subtracted in 200 components = 0.00232526 Jy
! Clean residual min=-0.001084 max=0.001052 Jy/beam
! Clean residual mean=-0.000001 rms=0.000277 Jy/beam
! Combined flux in latest and established models = 0.0208956 Jy
! Adding 15 model components to the UV plane model.
! The established model now contains 25 components and 0.0208956 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.841 mas, bmaj=5.142 mas, bpa=0.555 degrees
! Estimated noise=0.423889 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000267628 Jy
! Component: 100  -  total flux cleaned = 0.000228498 Jy
! Component: 150  -  total flux cleaned = 0.000210511 Jy
! Component: 200  -  total flux cleaned = 0.000225296 Jy
! Total flux subtracted in 200 components = 0.000225296 Jy
! Clean residual min=-0.001041 max=0.001041 Jy/beam
! Clean residual mean=-0.000001 rms=0.000320 Jy/beam
! Combined flux in latest and established models = 0.0211209 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.39639e-05 Jy
! Component: 100  -  total flux cleaned = -2.54914e-05 Jy
! Component: 150  -  total flux cleaned = -3.63017e-05 Jy
! Component: 200  -  total flux cleaned = -4.64394e-05 Jy
! Total flux subtracted in 200 components = -4.64394e-05 Jy
! Clean residual min=-0.000966 max=0.001013 Jy/beam
! Clean residual mean=-0.000001 rms=0.000313 Jy/beam
! Combined flux in latest and established models = 0.0210744 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 39 components and 0.0210744 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.826 mas, bmaj=4.084 mas, bpa=0.4254 degrees
! Estimated noise=0.354677 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.71659e-05 Jy
! Component: 100  -  total flux cleaned = -3.51129e-05 Jy
! Component: 150  -  total flux cleaned = -9.27495e-05 Jy
! Component: 200  -  total flux cleaned = -0.000105401 Jy
! Total flux subtracted in 200 components = -0.000105401 Jy
! Clean residual min=-0.000941 max=0.001055 Jy/beam
! Clean residual mean=-0.000001 rms=0.000260 Jy/beam
! Combined flux in latest and established models = 0.020969 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 57 components and 0.020969 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036569Jy  sigma=0.649197
! Fit after  self-cal, rms=0.036562Jy  sigma=0.649094
wmodel /scr/pima/bp192a1_uvs/J0201+2933_C_map.mod
! Writing 57 model components to file: /scr/pima/bp192a1_uvs/J0201+2933_C_map.mod
wobs /scr/pima/bp192a1_uvs/J0201+2933_C_uvs.fits
! Writing UV FITS file: /scr/pima/bp192a1_uvs/J0201+2933_C_uvs.fits
wwins /scr/pima/bp192a1_uvs/J0201+2933_C_map.win
! wwins: Wrote 2 windows to /scr/pima/bp192a1_uvs/J0201+2933_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000229352 Jy
! Component: 100  -  total flux cleaned = 0.00022924 Jy
! Component: 150  -  total flux cleaned = 0.000245497 Jy
! Component: 200  -  total flux cleaned = 0.000138971 Jy
! Component: 250  -  total flux cleaned = 0.000139299 Jy
! Component: 300  -  total flux cleaned = 0.000124561 Jy
! Component: 350  -  total flux cleaned = 9.7152e-05 Jy
! Component: 400  -  total flux cleaned = 0.000123586 Jy
! Component: 450  -  total flux cleaned = 9.75552e-05 Jy
! Component: 500  -  total flux cleaned = 0.000147735 Jy
! Component: 550  -  total flux cleaned = 0.000147632 Jy
! Component: 600  -  total flux cleaned = 0.000159312 Jy
! Component: 650  -  total flux cleaned = 0.000159433 Jy
! Component: 700  -  total flux cleaned = 0.000182183 Jy
! Component: 750  -  total flux cleaned = 0.00016014 Jy
! Component: 800  -  total flux cleaned = 0.000192956 Jy
! Component: 850  -  total flux cleaned = 0.000203788 Jy
! Component: 900  -  total flux cleaned = 0.000182835 Jy
! Component: 950  -  total flux cleaned = 0.000182997 Jy
! Component: 1000  -  total flux cleaned = 0.000173058 Jy
! Component: 1050  -  total flux cleaned = 0.000173117 Jy
! Component: 1100  -  total flux cleaned = 0.000163306 Jy
! Component: 1150  -  total flux cleaned = 0.000153555 Jy
! Component: 1200  -  total flux cleaned = 0.000134579 Jy
! Component: 1250  -  total flux cleaned = 8.81715e-05 Jy
! Component: 1300  -  total flux cleaned = 7.93365e-05 Jy
! Component: 1350  -  total flux cleaned = 8.84614e-05 Jy
! Component: 1400  -  total flux cleaned = 8.84903e-05 Jy
! Component: 1450  -  total flux cleaned = 0.000114703 Jy
! Component: 1500  -  total flux cleaned = 8.88197e-05 Jy
! Component: 1550  -  total flux cleaned = 8.89549e-05 Jy
! Component: 1600  -  total flux cleaned = 0.000122174 Jy
! Component: 1650  -  total flux cleaned = 8.09704e-05 Jy
! Component: 1700  -  total flux cleaned = 0.000105294 Jy
! Component: 1750  -  total flux cleaned = 7.32818e-05 Jy
! Component: 1800  -  total flux cleaned = 7.33506e-05 Jy
! Component: 1850  -  total flux cleaned = 8.11849e-05 Jy
! Component: 1900  -  total flux cleaned = 6.5971e-05 Jy
! Component: 1950  -  total flux cleaned = 0.000104071 Jy
! Component: 2000  -  total flux cleaned = 8.89503e-05 Jy
! Component: 2050  -  total flux cleaned = 0.000103804 Jy
! Component: 2100  -  total flux cleaned = 8.18381e-05 Jy
! Component: 2150  -  total flux cleaned = 9.64801e-05 Jy
! Component: 2200  -  total flux cleaned = 0.00011081 Jy
! Component: 2250  -  total flux cleaned = 0.000139183 Jy
! Component: 2300  -  total flux cleaned = 0.000132108 Jy
! Component: 2350  -  total flux cleaned = 0.000132178 Jy
! Component: 2400  -  total flux cleaned = 0.000132162 Jy
! Component: 2450  -  total flux cleaned = 0.000138907 Jy
! Component: 2500  -  total flux cleaned = 0.000118813 Jy
! Component: 2550  -  total flux cleaned = 0.000112318 Jy
! Component: 2600  -  total flux cleaned = 0.000118981 Jy
! Component: 2650  -  total flux cleaned = 9.28441e-05 Jy
! Component: 2700  -  total flux cleaned = 7.35228e-05 Jy
! Component: 2750  -  total flux cleaned = 6.71872e-05 Jy
! Component: 2800  -  total flux cleaned = 4.82378e-05 Jy
! Component: 2850  -  total flux cleaned = 2.95306e-05 Jy
! Component: 2900  -  total flux cleaned = 4.87189e-06 Jy
! Component: 2950  -  total flux cleaned = -2.56425e-05 Jy
! Component: 3000  -  total flux cleaned = -4.99626e-05 Jy
! Component: 3050  -  total flux cleaned = -6.79025e-05 Jy
! Component: 3100  -  total flux cleaned = -8.57649e-05 Jy
! Component: 3150  -  total flux cleaned = -0.000132826 Jy
! Component: 3200  -  total flux cleaned = -0.000167817 Jy
! Component: 3250  -  total flux cleaned = -0.000202343 Jy
! Component: 3300  -  total flux cleaned = -0.00021376 Jy
! Component: 3350  -  total flux cleaned = -0.000247663 Jy
! Component: 3400  -  total flux cleaned = -0.00028691 Jy
! Component: 3450  -  total flux cleaned = -0.000297972 Jy
! Component: 3500  -  total flux cleaned = -0.000308991 Jy
! Component: 3550  -  total flux cleaned = -0.000330881 Jy
! Component: 3600  -  total flux cleaned = -0.000357878 Jy
! Component: 3650  -  total flux cleaned = -0.000363287 Jy
! Component: 3700  -  total flux cleaned = -0.000389914 Jy
! Component: 3750  -  total flux cleaned = -0.00042681 Jy
! Component: 3800  -  total flux cleaned = -0.000452992 Jy
! Component: 3850  -  total flux cleaned = -0.000478895 Jy
! Component: 3900  -  total flux cleaned = -0.000499468 Jy
! Component: 3950  -  total flux cleaned = -0.000524992 Jy
! Component: 4000  -  total flux cleaned = -0.00054527 Jy
! Component: 4050  -  total flux cleaned = -0.000570419 Jy
! Total flux subtracted in 4096 components = -0.000585282 Jy
! Clean residual min=-0.000326 max=0.000303 Jy/beam
! Clean residual mean=-0.000000 rms=0.000087 Jy/beam
! Combined flux in latest and established models = 0.0203837 Jy
keep
! Adding 298 model components to the UV plane model.
! The established model now contains 355 components and 0.0203837 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bp192a1_uvs/J0201+2933_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.826 x 4.084 at 0.4254 degrees (North through East)
! Clean map  min=-0.001706  max=0.017837 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp192a1_uvs/J0201+2933_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0178369 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 8.65819e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.45623 1.45623 2.91246 5.82491 11.6498 23.2997 46.5993 93.1986
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.017 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  206.011 
quit
! Quitting program
! Log file /scr/pima/bp192a1_uvs/J0201+2933_C_uvs.log closed on Wed Sep 16 13:27:53 2015