! Started logfile: /scr/pima/bp192a1_uvs/J0157-104A_X_uvs.log on Wed Sep 16 13:27:29 2015
obs /scr/pima/bp192a1_uvs/J0157-104A_X_uva.fits
! Reading UV FITS file: /scr/pima/bp192a1_uvs/J0157-104A_X_uva.fits
! AN table 1: 18 integrations on 10 of 10 possible baselines.
! Apparent sampling: 0.6 visibilities/baseline/integration-bin.
! Found source: J0157-104A
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 864 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp192a1_uvs/J0157-104A_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.999142Jy  sigma=22.436004
! Fit after  self-cal, rms=0.930490Jy  sigma=20.978579
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.276 mas, bmaj=12.52 mas, bpa=19.88 degrees
! Estimated noise=1.28189 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0552351 Jy
! Component: 100  -  total flux cleaned = 0.0732243 Jy
! Total flux subtracted in 100 components = 0.0732243 Jy
! Clean residual min=-0.009242 max=0.009225 Jy/beam
! Clean residual mean=-0.000099 rms=0.004738 Jy/beam
! Combined flux in latest and established models = 0.0732243 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 40 components and 0.0732243 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.052385Jy  sigma=1.106652
! Fit after  self-cal, rms=0.051291Jy  sigma=1.086474
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.025 mas, bmaj=13.36 mas, bpa=21.35 degrees
! Estimated noise=1.07864 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00664854 Jy
! Component: 100  -  total flux cleaned = -0.00597104 Jy
! Component: 150  -  total flux cleaned = -0.006556 Jy
! Component: 200  -  total flux cleaned = -0.00651676 Jy
! Total flux subtracted in 200 components = -0.00651676 Jy
! Clean residual min=-0.003354 max=0.003340 Jy/beam
! Clean residual mean=-0.000053 rms=0.001674 Jy/beam
! Combined flux in latest and established models = 0.0667076 Jy
! Performing phase self-cal
! Adding 110 model components to the UV plane model.
! The established model now contains 150 components and 0.0667076 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.045888Jy  sigma=0.985294
! Fit after  self-cal, rms=0.044424Jy  sigma=0.962255
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.025 x 13.36 at 21.35 degrees (North through East)
! Clean map  min=-0.010303  max=0.059697 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.94     KP        0.96     LA        0.90     OV        1.06     
!   PT        0.97     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Fit before self-cal, rms=0.044424Jy  sigma=0.962255
! Fit after  self-cal, rms=0.043971Jy  sigma=0.959941
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.036 mas, bmaj=13.34 mas, bpa=21.34 degrees
! Estimated noise=1.06882 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000567146 Jy
! Component: 100  -  total flux cleaned = 0.000843615 Jy
! Component: 150  -  total flux cleaned = 0.000645908 Jy
! Component: 200  -  total flux cleaned = 0.000481492 Jy
! Total flux subtracted in 200 components = 0.000481492 Jy
! Clean residual min=-0.001312 max=0.001293 Jy/beam
! Clean residual mean=-0.000018 rms=0.000608 Jy/beam
! Combined flux in latest and established models = 0.0671891 Jy
! Performing phase self-cal
! Adding 99 model components to the UV plane model.
! The established model now contains 247 components and 0.0671891 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.043182Jy  sigma=0.945351
! Fit after  self-cal, rms=0.042869Jy  sigma=0.941364
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.042869Jy  sigma=0.941364
! Fit after  self-cal, rms=0.042863Jy  sigma=0.940585
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.028 mas, bmaj=13.35 mas, bpa=21.33 degrees
! Estimated noise=1.06988 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00144396 Jy
! Component: 100  -  total flux cleaned = 0.00166354 Jy
! Component: 150  -  total flux cleaned = 0.00150313 Jy
! Component: 200  -  total flux cleaned = 0.00100348 Jy
! Total flux subtracted in 200 components = 0.00100348 Jy
! Clean residual min=-0.000798 max=0.000785 Jy/beam
! Clean residual mean=-0.000004 rms=0.000325 Jy/beam
! Combined flux in latest and established models = 0.0681925 Jy
selfcal
! Performing phase self-cal
! Adding 108 model components to the UV plane model.
! The established model now contains 343 components and 0.0681925 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.042644Jy  sigma=0.936129
! Fit after  self-cal, rms=0.042591Jy  sigma=0.935775
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.25445e-05 Jy
! Component: 100  -  total flux cleaned = -0.000576823 Jy
! Component: 150  -  total flux cleaned = -0.000997949 Jy
! Component: 200  -  total flux cleaned = -0.00170299 Jy
! Total flux subtracted in 200 components = -0.00170299 Jy
! Clean residual min=-0.000644 max=0.000639 Jy/beam
! Clean residual mean=-0.000000 rms=0.000250 Jy/beam
! Combined flux in latest and established models = 0.0664895 Jy
! Performing phase self-cal
! Adding 72 model components to the UV plane model.
! The established model now contains 413 components and 0.0664895 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.042512Jy  sigma=0.933837
! Fit after  self-cal, rms=0.042487Jy  sigma=0.933650
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.042487Jy  sigma=0.933650
! Fit after  self-cal, rms=0.042536Jy  sigma=0.933377
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.019 mas, bmaj=13.37 mas, bpa=21.35 degrees
! Estimated noise=1.07064 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000186576 Jy
! Component: 100  -  total flux cleaned = -0.000727874 Jy
! Component: 150  -  total flux cleaned = -0.0011877 Jy
! Component: 200  -  total flux cleaned = -0.00142041 Jy
! Total flux subtracted in 200 components = -0.00142041 Jy
! Clean residual min=-0.000548 max=0.000534 Jy/beam
! Clean residual mean=0.000001 rms=0.000217 Jy/beam
! Combined flux in latest and established models = 0.0650691 Jy
selfcal
! Performing phase self-cal
! Adding 77 model components to the UV plane model.
! The established model now contains 479 components and 0.0650691 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.042472Jy  sigma=0.932022
! Fit after  self-cal, rms=0.042460Jy  sigma=0.931890
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.9306e-06 Jy
! Component: 100  -  total flux cleaned = -0.000169257 Jy
! Component: 150  -  total flux cleaned = -0.000139853 Jy
! Component: 200  -  total flux cleaned = -0.000110879 Jy
! Total flux subtracted in 200 components = -0.000110879 Jy
! Clean residual min=-0.000475 max=0.000480 Jy/beam
! Clean residual mean=0.000002 rms=0.000186 Jy/beam
! Combined flux in latest and established models = 0.0649582 Jy
! Performing phase self-cal
! Adding 65 model components to the UV plane model.
! The established model now contains 536 components and 0.0649582 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.042415Jy  sigma=0.930894
! Fit after  self-cal, rms=0.042407Jy  sigma=0.930783
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.042407Jy  sigma=0.930783
! Fit after  self-cal, rms=0.042449Jy  sigma=0.930737
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.254 mas, bmaj=13.08 mas, bpa=21.4 degrees
! Estimated noise=1.07639 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000251366 Jy
! Component: 100  -  total flux cleaned = -0.000519167 Jy
! Component: 150  -  total flux cleaned = -0.000766647 Jy
! Component: 200  -  total flux cleaned = -0.00121782 Jy
! Total flux subtracted in 200 components = -0.00121782 Jy
! Clean residual min=-0.000440 max=0.000438 Jy/beam
! Clean residual mean=0.000002 rms=0.000171 Jy/beam
! Combined flux in latest and established models = 0.0637404 Jy
selfcal
! Performing phase self-cal
! Adding 60 model components to the UV plane model.
! The established model now contains 581 components and 0.0637404 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.042411Jy  sigma=0.929936
! Fit after  self-cal, rms=0.042406Jy  sigma=0.929859
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.9126e-05 Jy
! Component: 100  -  total flux cleaned = 0.000315276 Jy
! Component: 150  -  total flux cleaned = 0.000390628 Jy
! Component: 200  -  total flux cleaned = 0.000340361 Jy
! Total flux subtracted in 200 components = 0.000340361 Jy
! Clean residual min=-0.000406 max=0.000405 Jy/beam
! Clean residual mean=0.000003 rms=0.000156 Jy/beam
! Combined flux in latest and established models = 0.0640808 Jy
! Performing phase self-cal
! Adding 76 model components to the UV plane model.
! The established model now contains 642 components and 0.0640807 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.042375Jy  sigma=0.929161
! Fit after  self-cal, rms=0.042372Jy  sigma=0.929066
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.015 mas, bmaj=13.37 mas, bpa=21.36 degrees
! Estimated noise=1.07127 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.015 x 13.37 at 21.36 degrees (North through East)
! Clean map  min=-0.0065065  max=0.057323 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.263 mas, bmaj=12.53 mas, bpa=19.91 degrees
! Estimated noise=1.27516 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0556398 Jy
! Component: 100  -  total flux cleaned = 0.0758035 Jy
! Component: 150  -  total flux cleaned = 0.0740754 Jy
! Component: 200  -  total flux cleaned = 0.0725976 Jy
! Total flux subtracted in 200 components = 0.0725976 Jy
! Clean residual min=-0.007534 max=0.007479 Jy/beam
! Clean residual mean=-0.000112 rms=0.003407 Jy/beam
! Combined flux in latest and established models = 0.0725976 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 77 model components to the UV plane model.
! The established model now contains 77 components and 0.0725976 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.015 mas, bmaj=13.37 mas, bpa=21.36 degrees
! Estimated noise=1.07127 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00362985 Jy
! Component: 100  -  total flux cleaned = -0.0048773 Jy
! Component: 150  -  total flux cleaned = -0.00636359 Jy
! Component: 200  -  total flux cleaned = -0.00723064 Jy
! Total flux subtracted in 200 components = -0.00723064 Jy
! Clean residual min=-0.002163 max=0.002123 Jy/beam
! Clean residual mean=-0.000036 rms=0.000962 Jy/beam
! Combined flux in latest and established models = 0.065367 Jy
! Adding 95 model components to the UV plane model.
! The established model now contains 172 components and 0.065367 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.254 mas, bmaj=13.08 mas, bpa=21.4 degrees
! Estimated noise=1.07639 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00126713 Jy
! Component: 100  -  total flux cleaned = 0.00159017 Jy
! Component: 150  -  total flux cleaned = 0.00178458 Jy
! Component: 200  -  total flux cleaned = 0.00220468 Jy
! Total flux subtracted in 200 components = 0.00220468 Jy
! Clean residual min=-0.000967 max=0.000983 Jy/beam
! Clean residual mean=-0.000005 rms=0.000379 Jy/beam
! Combined flux in latest and established models = 0.0675717 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000296754 Jy
! Component: 100  -  total flux cleaned = 0.000359735 Jy
! Component: 150  -  total flux cleaned = 0.000628432 Jy
! Component: 200  -  total flux cleaned = 0.00105786 Jy
! Total flux subtracted in 200 components = 0.00105786 Jy
! Clean residual min=-0.001228 max=0.001230 Jy/beam
! Clean residual mean=-0.000007 rms=0.000467 Jy/beam
! Combined flux in latest and established models = 0.0686295 Jy
! Adding 143 model components to the UV plane model.
! The established model now contains 314 components and 0.0686295 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.015 mas, bmaj=13.37 mas, bpa=21.36 degrees
! Estimated noise=1.07127 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000332659 Jy
! Component: 100  -  total flux cleaned = 0.000430213 Jy
! Component: 150  -  total flux cleaned = 0.00047713 Jy
! Component: 200  -  total flux cleaned = 0.000525744 Jy
! Total flux subtracted in 200 components = 0.000525744 Jy
! Clean residual min=-0.000780 max=0.000780 Jy/beam
! Clean residual mean=0.000004 rms=0.000270 Jy/beam
! Combined flux in latest and established models = 0.0691552 Jy
selfcal
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 356 components and 0.0691552 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.042484Jy  sigma=0.932359
! Fit after  self-cal, rms=0.042504Jy  sigma=0.931762
wmodel /scr/pima/bp192a1_uvs/J0157-104A_X_map.mod
! Writing 356 model components to file: /scr/pima/bp192a1_uvs/J0157-104A_X_map.mod
wobs /scr/pima/bp192a1_uvs/J0157-104A_X_uvs.fits
! Writing UV FITS file: /scr/pima/bp192a1_uvs/J0157-104A_X_uvs.fits
wwins /scr/pima/bp192a1_uvs/J0157-104A_X_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/scr/pima/bp192a1_uvs/J0157-104A_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.015 x 13.37 at 21.36 degrees (North through East)
! Clean map  min=-0.0072724  max=0.048127 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp192a1_uvs/J0157-104A_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0481274 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000281928 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.75739 1.75739 3.51477 7.02954 14.0591 28.1182 56.2364
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.048 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  170.708 
quit
! Quitting program
! Log file /scr/pima/bp192a1_uvs/J0157-104A_X_uvs.log closed on Wed Sep 16 13:27:32 2015