! Started logfile: /scr/pima/bp192a1_uvs/J0108+1322_C_uvs.log on Wed Sep 16 13:26:39 2015
obs /scr/pima/bp192a1_uvs/J0108+1322_C_uva.fits
! Reading UV FITS file: /scr/pima/bp192a1_uvs/J0108+1322_C_uva.fits
! AN table 1: 19 integrations on 36 of 36 possible baselines.
! AN table 2: 19 integrations on 1 of 1 possible baselines.
! Apparent sampling: 0.567568 visibilities/baseline/integration-bin.
! Found source: J0108+1322
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 3192 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp192a1_uvs/J0108+1322_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 38 telescope corrections were flagged in sub-array 1.
!  A total of 38 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 38 telescope corrections were flagged in sub-array 1.
!  A total of 38 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 38 telescope corrections were flagged in sub-array 1.
!  A total of 38 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 38 telescope corrections were flagged in sub-array 1.
!  A total of 38 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 5.
!  A total of 38 telescope corrections were flagged in sub-array 1.
!  A total of 38 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 6.
!  A total of 38 telescope corrections were flagged in sub-array 1.
!  A total of 38 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 38 telescope corrections were flagged in sub-array 1.
!  A total of 38 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 38 telescope corrections were flagged in sub-array 1.
!  A total of 38 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.000701Jy  sigma=24.636441
! Fit after  self-cal, rms=0.979242Jy  sigma=24.325174
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.437 mas, bmaj=10.33 mas, bpa=20.81 degrees
! Estimated noise=0.770844 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0162494 Jy
! Component: 100  -  total flux cleaned = 0.0203952 Jy
! Total flux subtracted in 100 components = 0.0203952 Jy
! Clean residual min=-0.002688 max=0.002714 Jy/beam
! Clean residual mean=0.000001 rms=0.000754 Jy/beam
! Combined flux in latest and established models = 0.0203952 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.0203952 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030698Jy  sigma=0.698004
! Fit after  self-cal, rms=0.028466Jy  sigma=0.644599
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00436415 Jy
! Component: 100  -  total flux cleaned = 0.00594781 Jy
! Total flux subtracted in 100 components = 0.00594781 Jy
! Clean residual min=-0.002227 max=0.002113 Jy/beam
! Clean residual mean=-0.000000 rms=0.000552 Jy/beam
! Combined flux in latest and established models = 0.026343 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 36 components and 0.026343 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027865Jy  sigma=0.632993
! Fit after  self-cal, rms=0.027859Jy  sigma=0.632668
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.786 mas, bmaj=10.14 mas, bpa=21.77 degrees
! Estimated noise=0.555761 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000206263 Jy
! Component: 100  -  total flux cleaned = 0.000238327 Jy
! Component: 150  -  total flux cleaned = 0.000311417 Jy
! Component: 200  -  total flux cleaned = 0.000371908 Jy
! Total flux subtracted in 200 components = 0.000371908 Jy
! Clean residual min=-0.001552 max=0.001884 Jy/beam
! Clean residual mean=-0.000002 rms=0.000460 Jy/beam
! Combined flux in latest and established models = 0.026715 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 59 components and 0.026715 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027793Jy  sigma=0.631390
! Fit after  self-cal, rms=0.027788Jy  sigma=0.631199
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.786 x 10.14 at 21.77 degrees (North through East)
! Clean map  min=-0.0015404  max=0.023659 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    NL        0.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    NL        0.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    NL        0.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    NL        0.00*    
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    NL        0.00*    
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    NL        0.00*    
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    NL        0.00*    
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        1.04     HN        1.00*    KP        0.86     
!   LA        1.05     NL        1.00*    OV        1.08     PT        0.98     
!   SC        0.89     
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    NL        0.00*    
! 
! 
! Fit before self-cal, rms=0.027788Jy  sigma=0.631199
! Fit after  self-cal, rms=0.027598Jy  sigma=0.630651
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.773 mas, bmaj=10.1 mas, bpa=21.77 degrees
! Estimated noise=0.551618 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000131427 Jy
! Component: 100  -  total flux cleaned = 9.43664e-05 Jy
! Component: 150  -  total flux cleaned = 1.33407e-05 Jy
! Component: 200  -  total flux cleaned = -5.96364e-05 Jy
! Total flux subtracted in 200 components = -5.96364e-05 Jy
! Clean residual min=-0.001458 max=0.001797 Jy/beam
! Clean residual mean=-0.000002 rms=0.000435 Jy/beam
! Combined flux in latest and established models = 0.0266553 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 73 components and 0.0266553 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027573Jy  sigma=0.630085
! Fit after  self-cal, rms=0.027576Jy  sigma=0.629967
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027576Jy  sigma=0.629967
! Fit after  self-cal, rms=0.027720Jy  sigma=0.629503
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.779 mas, bmaj=10.15 mas, bpa=21.72 degrees
! Estimated noise=0.553406 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000232737 Jy
! Component: 100  -  total flux cleaned = -0.000365614 Jy
! Component: 150  -  total flux cleaned = -0.000470032 Jy
! Component: 200  -  total flux cleaned = -0.000505605 Jy
! Total flux subtracted in 200 components = -0.000505605 Jy
! Clean residual min=-0.001317 max=0.001727 Jy/beam
! Clean residual mean=-0.000001 rms=0.000423 Jy/beam
! Combined flux in latest and established models = 0.0261497 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 82 components and 0.0261497 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027709Jy  sigma=0.629170
! Fit after  self-cal, rms=0.027718Jy  sigma=0.629093
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.76613e-05 Jy
! Component: 100  -  total flux cleaned = -1.77877e-05 Jy
! Component: 150  -  total flux cleaned = -2.83363e-05 Jy
! Component: 200  -  total flux cleaned = -2.82958e-05 Jy
! Total flux subtracted in 200 components = -2.82958e-05 Jy
! Clean residual min=-0.001316 max=0.001693 Jy/beam
! Clean residual mean=-0.000002 rms=0.000417 Jy/beam
! Combined flux in latest and established models = 0.0261214 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 91 components and 0.0261214 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027710Jy  sigma=0.628908
! Fit after  self-cal, rms=0.027711Jy  sigma=0.628899
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027711Jy  sigma=0.628899
! Fit after  self-cal, rms=0.026893Jy  sigma=0.627928
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.79 mas, bmaj=10.17 mas, bpa=21.73 degrees
! Estimated noise=0.545261 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00047159 Jy
! Component: 100  -  total flux cleaned = -0.000662724 Jy
! Component: 150  -  total flux cleaned = -0.000699108 Jy
! Component: 200  -  total flux cleaned = -0.000690489 Jy
! Total flux subtracted in 200 components = -0.000690489 Jy
! Clean residual min=-0.001203 max=0.001492 Jy/beam
! Clean residual mean=-0.000002 rms=0.000385 Jy/beam
! Combined flux in latest and established models = 0.0254309 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 101 components and 0.0254309 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026888Jy  sigma=0.627544
! Fit after  self-cal, rms=0.026893Jy  sigma=0.627446
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.38705e-05 Jy
! Component: 100  -  total flux cleaned = -1.38191e-05 Jy
! Component: 150  -  total flux cleaned = -6.03406e-06 Jy
! Component: 200  -  total flux cleaned = 8.82182e-06 Jy
! Total flux subtracted in 200 components = 8.82182e-06 Jy
! Clean residual min=-0.001193 max=0.001539 Jy/beam
! Clean residual mean=-0.000002 rms=0.000384 Jy/beam
! Combined flux in latest and established models = 0.0254398 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 104 components and 0.0254397 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026889Jy  sigma=0.627338
! Fit after  self-cal, rms=0.026889Jy  sigma=0.627334
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026889Jy  sigma=0.627334
! Fit after  self-cal, rms=0.026798Jy  sigma=0.627266
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.702 mas, bmaj=11.32 mas, bpa=32.72 degrees
! Estimated noise=0.640038 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000153088 Jy
! Component: 100  -  total flux cleaned = -0.00018174 Jy
! Component: 150  -  total flux cleaned = -0.000164406 Jy
! Component: 200  -  total flux cleaned = -0.00014824 Jy
! Total flux subtracted in 200 components = -0.00014824 Jy
! Clean residual min=-0.001355 max=0.001694 Jy/beam
! Clean residual mean=-0.000004 rms=0.000489 Jy/beam
! Combined flux in latest and established models = 0.0252915 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 117 components and 0.0252915 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026796Jy  sigma=0.627139
! Fit after  self-cal, rms=0.026794Jy  sigma=0.627064
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.1815e-06 Jy
! Component: 100  -  total flux cleaned = 1.98191e-05 Jy
! Component: 150  -  total flux cleaned = 4.13525e-05 Jy
! Component: 200  -  total flux cleaned = 6.19811e-05 Jy
! Total flux subtracted in 200 components = 6.19811e-05 Jy
! Clean residual min=-0.001356 max=0.001700 Jy/beam
! Clean residual mean=-0.000004 rms=0.000484 Jy/beam
! Combined flux in latest and established models = 0.0253535 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 127 components and 0.0253535 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026793Jy  sigma=0.627010
! Fit after  self-cal, rms=0.026792Jy  sigma=0.627000
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.794 mas, bmaj=10.17 mas, bpa=21.72 degrees
! Estimated noise=0.542178 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.794 x 10.17 at 21.72 degrees (North through East)
! Clean map  min=-0.0018824  max=0.023143 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.441 mas, bmaj=10.39 mas, bpa=20.77 degrees
! Estimated noise=0.751347 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0183596 Jy
! Component: 100  -  total flux cleaned = 0.0231138 Jy
! Component: 150  -  total flux cleaned = 0.0250679 Jy
! Component: 200  -  total flux cleaned = 0.0261186 Jy
! Total flux subtracted in 200 components = 0.0261186 Jy
! Clean residual min=-0.001989 max=0.001913 Jy/beam
! Clean residual mean=0.000000 rms=0.000536 Jy/beam
! Combined flux in latest and established models = 0.0261186 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 30 model components to the UV plane model.
! The established model now contains 30 components and 0.0261186 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.794 mas, bmaj=10.17 mas, bpa=21.72 degrees
! Estimated noise=0.542178 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000719398 Jy
! Component: 100  -  total flux cleaned = -0.000721008 Jy
! Component: 150  -  total flux cleaned = -0.000831101 Jy
! Component: 200  -  total flux cleaned = -0.000925781 Jy
! Total flux subtracted in 200 components = -0.000925781 Jy
! Clean residual min=-0.001334 max=0.001678 Jy/beam
! Clean residual mean=-0.000002 rms=0.000427 Jy/beam
! Combined flux in latest and established models = 0.0251928 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 50 components and 0.0251928 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.702 mas, bmaj=11.32 mas, bpa=32.72 degrees
! Estimated noise=0.640038 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000204548 Jy
! Component: 100  -  total flux cleaned = -0.000245465 Jy
! Component: 150  -  total flux cleaned = -0.000280883 Jy
! Component: 200  -  total flux cleaned = -0.000296168 Jy
! Total flux subtracted in 200 components = -0.000296168 Jy
! Clean residual min=-0.001418 max=0.001862 Jy/beam
! Clean residual mean=-0.000003 rms=0.000525 Jy/beam
! Combined flux in latest and established models = 0.0248966 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.71335e-05 Jy
! Component: 100  -  total flux cleaned = -1.59301e-05 Jy
! Component: 150  -  total flux cleaned = -5.41616e-06 Jy
! Component: 200  -  total flux cleaned = 1.47433e-05 Jy
! Total flux subtracted in 200 components = 1.47433e-05 Jy
! Clean residual min=-0.001405 max=0.001797 Jy/beam
! Clean residual mean=-0.000003 rms=0.000508 Jy/beam
! Combined flux in latest and established models = 0.0249114 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 65 components and 0.0249114 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.794 mas, bmaj=10.17 mas, bpa=21.72 degrees
! Estimated noise=0.542178 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00018705 Jy
! Component: 100  -  total flux cleaned = -0.000157792 Jy
! Component: 150  -  total flux cleaned = -0.000117444 Jy
! Component: 200  -  total flux cleaned = -0.000117225 Jy
! Total flux subtracted in 200 components = -0.000117225 Jy
! Clean residual min=-0.001237 max=0.001512 Jy/beam
! Clean residual mean=-0.000002 rms=0.000385 Jy/beam
! Combined flux in latest and established models = 0.0247941 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 82 components and 0.0247941 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026807Jy  sigma=0.627263
! Fit after  self-cal, rms=0.026807Jy  sigma=0.627210
wmodel /scr/pima/bp192a1_uvs/J0108+1322_C_map.mod
! Writing 82 model components to file: /scr/pima/bp192a1_uvs/J0108+1322_C_map.mod
wobs /scr/pima/bp192a1_uvs/J0108+1322_C_uvs.fits
! Writing UV FITS file: /scr/pima/bp192a1_uvs/J0108+1322_C_uvs.fits
wwins /scr/pima/bp192a1_uvs/J0108+1322_C_map.win
! wwins: Wrote 1 windows to /scr/pima/bp192a1_uvs/J0108+1322_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000647763 Jy
! Component: 100  -  total flux cleaned = 0.000847852 Jy
! Component: 150  -  total flux cleaned = 0.000827787 Jy
! Component: 200  -  total flux cleaned = 0.000845796 Jy
! Component: 250  -  total flux cleaned = 0.000810494 Jy
! Component: 300  -  total flux cleaned = 0.000793251 Jy
! Component: 350  -  total flux cleaned = 0.000760416 Jy
! Component: 400  -  total flux cleaned = 0.000760129 Jy
! Component: 450  -  total flux cleaned = 0.000774897 Jy
! Component: 500  -  total flux cleaned = 0.000816912 Jy
! Component: 550  -  total flux cleaned = 0.000857348 Jy
! Component: 600  -  total flux cleaned = 0.000857869 Jy
! Component: 650  -  total flux cleaned = 0.0008707 Jy
! Component: 700  -  total flux cleaned = 0.000870564 Jy
! Component: 750  -  total flux cleaned = 0.000870578 Jy
! Component: 800  -  total flux cleaned = 0.000836093 Jy
! Component: 850  -  total flux cleaned = 0.000813687 Jy
! Component: 900  -  total flux cleaned = 0.000736794 Jy
! Component: 950  -  total flux cleaned = 0.000640013 Jy
! Component: 1000  -  total flux cleaned = 0.000534624 Jy
! Component: 1050  -  total flux cleaned = 0.000441628 Jy
! Component: 1100  -  total flux cleaned = 0.000350535 Jy
! Component: 1150  -  total flux cleaned = 0.000290946 Jy
! Component: 1200  -  total flux cleaned = 0.000232452 Jy
! Component: 1250  -  total flux cleaned = 0.000175099 Jy
! Component: 1300  -  total flux cleaned = 0.000165654 Jy
! Component: 1350  -  total flux cleaned = 0.000147054 Jy
! Component: 1400  -  total flux cleaned = 0.000119702 Jy
! Component: 1450  -  total flux cleaned = 8.37022e-05 Jy
! Component: 1500  -  total flux cleaned = 9.26939e-05 Jy
! Component: 1550  -  total flux cleaned = 7.50787e-05 Jy
! Component: 1600  -  total flux cleaned = 7.49601e-05 Jy
! Component: 1650  -  total flux cleaned = 4.92119e-05 Jy
! Component: 1700  -  total flux cleaned = 5.75871e-05 Jy
! Component: 1750  -  total flux cleaned = 5.7652e-05 Jy
! Component: 1800  -  total flux cleaned = 6.58787e-05 Jy
! Component: 1850  -  total flux cleaned = 5.77508e-05 Jy
! Component: 1900  -  total flux cleaned = 8.18937e-05 Jy
! Component: 1950  -  total flux cleaned = 6.60129e-05 Jy
! Component: 2000  -  total flux cleaned = 5.80875e-05 Jy
! Component: 2050  -  total flux cleaned = 5.80974e-05 Jy
! Component: 2100  -  total flux cleaned = 7.34784e-05 Jy
! Component: 2150  -  total flux cleaned = 6.58357e-05 Jy
! Component: 2200  -  total flux cleaned = 8.08949e-05 Jy
! Component: 2250  -  total flux cleaned = 8.82729e-05 Jy
! Component: 2300  -  total flux cleaned = 8.08087e-05 Jy
! Component: 2350  -  total flux cleaned = 5.87638e-05 Jy
! Component: 2400  -  total flux cleaned = 7.34075e-05 Jy
! Component: 2450  -  total flux cleaned = 5.15502e-05 Jy
! Component: 2500  -  total flux cleaned = 6.6021e-05 Jy
! Component: 2550  -  total flux cleaned = 5.16525e-05 Jy
! Component: 2600  -  total flux cleaned = 4.45798e-05 Jy
! Component: 2650  -  total flux cleaned = 4.45606e-05 Jy
! Component: 2700  -  total flux cleaned = 9.31915e-06 Jy
! Component: 2750  -  total flux cleaned = -1.16517e-05 Jy
! Component: 2800  -  total flux cleaned = -1.85932e-05 Jy
! Component: 2850  -  total flux cleaned = -3.94237e-05 Jy
! Component: 2900  -  total flux cleaned = -8.08075e-05 Jy
! Component: 2950  -  total flux cleaned = -0.000101371 Jy
! Component: 3000  -  total flux cleaned = -0.000115024 Jy
! Component: 3050  -  total flux cleaned = -0.000135417 Jy
! Component: 3100  -  total flux cleaned = -0.00014894 Jy
! Component: 3150  -  total flux cleaned = -0.000162387 Jy
! Component: 3200  -  total flux cleaned = -0.000175836 Jy
! Component: 3250  -  total flux cleaned = -0.000195901 Jy
! Component: 3300  -  total flux cleaned = -0.000209162 Jy
! Component: 3350  -  total flux cleaned = -0.00020913 Jy
! Component: 3400  -  total flux cleaned = -0.00018928 Jy
! Component: 3450  -  total flux cleaned = -0.000195934 Jy
! Component: 3500  -  total flux cleaned = -0.000202527 Jy
! Component: 3550  -  total flux cleaned = -0.000189377 Jy
! Component: 3600  -  total flux cleaned = -0.000209043 Jy
! Component: 3650  -  total flux cleaned = -0.000176367 Jy
! Component: 3700  -  total flux cleaned = -0.000202464 Jy
! Component: 3750  -  total flux cleaned = -0.000169875 Jy
! Component: 3800  -  total flux cleaned = -0.000163411 Jy
! Component: 3850  -  total flux cleaned = -0.000150419 Jy
! Component: 3900  -  total flux cleaned = -0.000150402 Jy
! Component: 3950  -  total flux cleaned = -0.00013092 Jy
! Component: 4000  -  total flux cleaned = -0.000117941 Jy
! Component: 4050  -  total flux cleaned = -0.000111483 Jy
! Total flux subtracted in 4096 components = -9.85678e-05 Jy
! Clean residual min=-0.000364 max=0.000362 Jy/beam
! Clean residual mean=-0.000002 rms=0.000113 Jy/beam
! Combined flux in latest and established models = 0.0246956 Jy
keep
! Adding 253 model components to the UV plane model.
! The established model now contains 335 components and 0.0246956 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bp192a1_uvs/J0108+1322_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.794 x 10.17 at 21.72 degrees (North through East)
! Clean map  min=-0.0016368  max=0.022575 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp192a1_uvs/J0108+1322_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0225746 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000115063 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.5291 1.5291 3.0582 6.1164 12.2328 24.4656 48.9312 97.8623
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.022 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  196.193 
quit
! Quitting program
! Log file /scr/pima/bp192a1_uvs/J0108+1322_C_uvs.log closed on Wed Sep 16 13:26:43 2015