! Started logfile: /scr/pima/bp192a1_uvs/J0105+1553_X_uvs.log on Wed Sep 16 13:26:17 2015 obs /scr/pima/bp192a1_uvs/J0105+1553_X_uva.fits ! Reading UV FITS file: /scr/pima/bp192a1_uvs/J0105+1553_X_uva.fits ! AN table 1: 18 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.955556 visibilities/baseline/integration-bin. ! Found source: J0105+1553 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 7.392e+09 3.2e+07 1 3.2e+07 ! 02 2 7.424e+09 3.2e+07 1 3.2e+07 ! 03 3 7.456e+09 3.2e+07 1 3.2e+07 ! 04 4 7.552e+09 3.2e+07 1 3.2e+07 ! 05 5 7.744e+09 3.2e+07 1 3.2e+07 ! 06 6 7.776e+09 3.2e+07 1 3.2e+07 ! 07 7 7.808e+09 3.2e+07 1 3.2e+07 ! 08 8 7.84e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 6192 visibilities. select RR ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/bp192a1_uvs/J0105+1553_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=1.009575Jy sigma=21.292722 ! Fit after self-cal, rms=0.900074Jy sigma=18.936256 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7439 mas, bmaj=2.053 mas, bpa=-2.036 degrees ! Estimated noise=0.599059 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0652484 Jy ! Component: 100 - total flux cleaned = 0.0985162 Jy ! Total flux subtracted in 100 components = 0.0985162 Jy ! Clean residual min=-0.011386 max=0.019535 Jy/beam ! Clean residual mean=-0.000012 rms=0.003464 Jy/beam ! Combined flux in latest and established models = 0.0985162 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.0985162 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.077393Jy sigma=1.577014 ! Fit after self-cal, rms=0.076918Jy sigma=1.567241 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9176 mas, bmaj=2.241 mas, bpa=-1.123 degrees ! Estimated noise=0.43407 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0407576 Jy ! Component: 100 - total flux cleaned = 0.066118 Jy ! Component: 150 - total flux cleaned = 0.0828671 Jy ! Component: 200 - total flux cleaned = 0.0941495 Jy ! Total flux subtracted in 200 components = 0.0941495 Jy ! Clean residual min=-0.008966 max=0.012762 Jy/beam ! Clean residual mean=-0.000005 rms=0.002651 Jy/beam ! Combined flux in latest and established models = 0.192666 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 57 components and 0.192666 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.047174Jy sigma=0.940873 ! Fit after self-cal, rms=0.046850Jy sigma=0.935305 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9176 x 2.241 at -1.123 degrees (North through East) ! Clean map min=-0.0090714 max=0.092514 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.046850Jy sigma=0.935305 ! Fit after self-cal, rms=0.046850Jy sigma=0.935305 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9176 mas, bmaj=2.241 mas, bpa=-1.123 degrees ! Estimated noise=0.43407 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00813671 Jy ! Component: 100 - total flux cleaned = 0.0136497 Jy ! Component: 150 - total flux cleaned = 0.0174883 Jy ! Component: 200 - total flux cleaned = 0.0197181 Jy ! Total flux subtracted in 200 components = 0.0197181 Jy ! Clean residual min=-0.009527 max=0.010677 Jy/beam ! Clean residual mean=-0.000003 rms=0.002317 Jy/beam ! Combined flux in latest and established models = 0.212384 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 64 components and 0.212384 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.044879Jy sigma=0.903529 ! Fit after self-cal, rms=0.044828Jy sigma=0.902786 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.044828Jy sigma=0.902786 ! Fit after self-cal, rms=0.044828Jy sigma=0.902786 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9176 mas, bmaj=2.241 mas, bpa=-1.123 degrees ! Estimated noise=0.43407 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000847922 Jy ! Component: 100 - total flux cleaned = 0.00163419 Jy ! Component: 150 - total flux cleaned = 0.00233375 Jy ! Component: 200 - total flux cleaned = 0.00295243 Jy ! Total flux subtracted in 200 components = 0.00295243 Jy ! Clean residual min=-0.009292 max=0.010003 Jy/beam ! Clean residual mean=-0.000003 rms=0.002275 Jy/beam ! Combined flux in latest and established models = 0.215336 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 67 components and 0.215336 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.044553Jy sigma=0.896868 ! Fit after self-cal, rms=0.044525Jy sigma=0.896470 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000444863 Jy ! Component: 100 - total flux cleaned = 0.000926768 Jy ! Component: 150 - total flux cleaned = 0.00120643 Jy ! Component: 200 - total flux cleaned = 0.0014155 Jy ! Total flux subtracted in 200 components = 0.0014155 Jy ! Clean residual min=-0.009165 max=0.009504 Jy/beam ! Clean residual mean=-0.000003 rms=0.002255 Jy/beam ! Combined flux in latest and established models = 0.216752 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 71 components and 0.216752 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.044391Jy sigma=0.893396 ! Fit after self-cal, rms=0.044374Jy sigma=0.893188 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.044374Jy sigma=0.893188 ! Fit after self-cal, rms=0.044374Jy sigma=0.893188 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9176 mas, bmaj=2.241 mas, bpa=-1.123 degrees ! Estimated noise=0.43407 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000253224 Jy ! Component: 100 - total flux cleaned = 0.000453269 Jy ! Component: 150 - total flux cleaned = 0.000643911 Jy ! Component: 200 - total flux cleaned = 0.000782172 Jy ! Total flux subtracted in 200 components = 0.000782172 Jy ! Clean residual min=-0.009090 max=0.009164 Jy/beam ! Clean residual mean=-0.000003 rms=0.002244 Jy/beam ! Combined flux in latest and established models = 0.217534 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 71 components and 0.217534 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.044279Jy sigma=0.891112 ! Fit after self-cal, rms=0.044271Jy sigma=0.891010 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000112682 Jy ! Component: 100 - total flux cleaned = 0.00020353 Jy ! Component: 150 - total flux cleaned = 0.000290442 Jy ! Component: 200 - total flux cleaned = 0.000373279 Jy ! Total flux subtracted in 200 components = 0.000373279 Jy ! Clean residual min=-0.009057 max=0.008988 Jy/beam ! Clean residual mean=-0.000003 rms=0.002236 Jy/beam ! Combined flux in latest and established models = 0.217907 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 72 components and 0.217907 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.044195Jy sigma=0.889368 ! Fit after self-cal, rms=0.044190Jy sigma=0.889294 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.044190Jy sigma=0.889294 ! Fit after self-cal, rms=0.044190Jy sigma=0.889294 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.128 mas, bmaj=3.074 mas, bpa=1.927 degrees ! Estimated noise=0.539621 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00417909 Jy ! Component: 100 - total flux cleaned = 0.00500914 Jy ! Component: 150 - total flux cleaned = 0.00514237 Jy ! Component: 200 - total flux cleaned = 0.00532688 Jy ! Total flux subtracted in 200 components = 0.00532688 Jy ! Clean residual min=-0.015192 max=0.012986 Jy/beam ! Clean residual mean=-0.000006 rms=0.003975 Jy/beam ! Combined flux in latest and established models = 0.223234 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 73 components and 0.223234 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.044249Jy sigma=0.895329 ! Fit after self-cal, rms=0.044187Jy sigma=0.894350 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000567155 Jy ! Component: 100 - total flux cleaned = 0.000508394 Jy ! Component: 150 - total flux cleaned = 0.000510173 Jy ! Component: 200 - total flux cleaned = 0.000561364 Jy ! Total flux subtracted in 200 components = 0.000561364 Jy ! Clean residual min=-0.015090 max=0.013042 Jy/beam ! Clean residual mean=-0.000006 rms=0.003960 Jy/beam ! Combined flux in latest and established models = 0.223796 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 75 components and 0.223796 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.044305Jy sigma=0.897012 ! Fit after self-cal, rms=0.044282Jy sigma=0.896691 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.9176 mas, bmaj=2.241 mas, bpa=-1.123 degrees ! Estimated noise=0.43407 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9176 x 2.241 at -1.123 degrees (North through East) ! Clean map min=-0.0093569 max=0.085986 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7439 mas, bmaj=2.053 mas, bpa=-2.036 degrees ! Estimated noise=0.599059 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0659747 Jy ! Component: 100 - total flux cleaned = 0.100337 Jy ! Component: 150 - total flux cleaned = 0.124868 Jy ! Component: 200 - total flux cleaned = 0.142838 Jy ! Total flux subtracted in 200 components = 0.142838 Jy ! Clean residual min=-0.008447 max=0.015176 Jy/beam ! Clean residual mean=-0.000007 rms=0.002462 Jy/beam ! Combined flux in latest and established models = 0.142838 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.142838 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9176 mas, bmaj=2.241 mas, bpa=-1.123 degrees ! Estimated noise=0.43407 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0259887 Jy ! Component: 100 - total flux cleaned = 0.0425551 Jy ! Component: 150 - total flux cleaned = 0.0540477 Jy ! Component: 200 - total flux cleaned = 0.0625494 Jy ! Total flux subtracted in 200 components = 0.0625494 Jy ! Clean residual min=-0.008364 max=0.008958 Jy/beam ! Clean residual mean=-0.000003 rms=0.002270 Jy/beam ! Combined flux in latest and established models = 0.205388 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 88 components and 0.205388 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.128 mas, bmaj=3.074 mas, bpa=1.927 degrees ! Estimated noise=0.539621 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0120155 Jy ! Component: 100 - total flux cleaned = 0.0195996 Jy ! Component: 150 - total flux cleaned = 0.0248461 Jy ! Component: 200 - total flux cleaned = 0.028546 Jy ! Total flux subtracted in 200 components = 0.028546 Jy ! Clean residual min=-0.013341 max=0.009894 Jy/beam ! Clean residual mean=-0.000008 rms=0.003473 Jy/beam ! Combined flux in latest and established models = 0.233934 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00262778 Jy ! Component: 100 - total flux cleaned = 0.00450469 Jy ! Component: 150 - total flux cleaned = 0.00584857 Jy ! Component: 200 - total flux cleaned = 0.00631207 Jy ! Total flux subtracted in 200 components = 0.00631207 Jy ! Clean residual min=-0.013246 max=0.009935 Jy/beam ! Clean residual mean=-0.000008 rms=0.003400 Jy/beam ! Combined flux in latest and established models = 0.240246 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 116 components and 0.240246 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9176 mas, bmaj=2.241 mas, bpa=-1.123 degrees ! Estimated noise=0.43407 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0024782 Jy ! Component: 100 - total flux cleaned = -0.00322816 Jy ! Component: 150 - total flux cleaned = -0.00355734 Jy ! Component: 200 - total flux cleaned = -0.00375105 Jy ! Total flux subtracted in 200 components = -0.00375105 Jy ! Clean residual min=-0.008030 max=0.006935 Jy/beam ! Clean residual mean=-0.000004 rms=0.001934 Jy/beam ! Combined flux in latest and established models = 0.236495 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 128 components and 0.236495 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.042192Jy sigma=0.850690 ! Fit after self-cal, rms=0.041804Jy sigma=0.841815 wmodel /scr/pima/bp192a1_uvs/J0105+1553_X_map.mod ! Writing 128 model components to file: /scr/pima/bp192a1_uvs/J0105+1553_X_map.mod wobs /scr/pima/bp192a1_uvs/J0105+1553_X_uvs.fits ! Writing UV FITS file: /scr/pima/bp192a1_uvs/J0105+1553_X_uvs.fits wwins /scr/pima/bp192a1_uvs/J0105+1553_X_map.win ! wwins: Wrote 2 windows to /scr/pima/bp192a1_uvs/J0105+1553_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00224472 Jy ! Component: 100 - total flux cleaned = -0.00347622 Jy ! Component: 150 - total flux cleaned = -0.00437739 Jy ! Component: 200 - total flux cleaned = -0.00522221 Jy ! Component: 250 - total flux cleaned = -0.00581572 Jy ! Component: 300 - total flux cleaned = -0.00618588 Jy ! Component: 350 - total flux cleaned = -0.00609616 Jy ! Component: 400 - total flux cleaned = -0.00584409 Jy ! Component: 450 - total flux cleaned = -0.00544683 Jy ! Component: 500 - total flux cleaned = -0.00514276 Jy ! Component: 550 - total flux cleaned = -0.00477867 Jy ! Component: 600 - total flux cleaned = -0.00436272 Jy ! Component: 650 - total flux cleaned = -0.00416396 Jy ! Component: 700 - total flux cleaned = -0.00397017 Jy ! Component: 750 - total flux cleaned = -0.00366034 Jy ! Component: 800 - total flux cleaned = -0.00342319 Jy ! Component: 850 - total flux cleaned = -0.003139 Jy ! Component: 900 - total flux cleaned = -0.00319429 Jy ! Component: 950 - total flux cleaned = -0.00297787 Jy ! Component: 1000 - total flux cleaned = -0.00287328 Jy ! Component: 1050 - total flux cleaned = -0.00277262 Jy ! Component: 1100 - total flux cleaned = -0.00253135 Jy ! Component: 1150 - total flux cleaned = -0.00239204 Jy ! Component: 1200 - total flux cleaned = -0.00216468 Jy ! Component: 1250 - total flux cleaned = -0.00198768 Jy ! Component: 1300 - total flux cleaned = -0.00173052 Jy ! Component: 1350 - total flux cleaned = -0.00160548 Jy ! Component: 1400 - total flux cleaned = -0.00140283 Jy ! Component: 1450 - total flux cleaned = -0.00132317 Jy ! Component: 1500 - total flux cleaned = -0.00116904 Jy ! Component: 1550 - total flux cleaned = -0.0010561 Jy ! Component: 1600 - total flux cleaned = -0.000910699 Jy ! Component: 1650 - total flux cleaned = -0.000840456 Jy ! Component: 1700 - total flux cleaned = -0.000771627 Jy ! Component: 1750 - total flux cleaned = -0.000704591 Jy ! Component: 1800 - total flux cleaned = -0.000670975 Jy ! Component: 1850 - total flux cleaned = -0.000638068 Jy ! Component: 1900 - total flux cleaned = -0.000574991 Jy ! Component: 1950 - total flux cleaned = -0.000604922 Jy ! Component: 2000 - total flux cleaned = -0.000545147 Jy ! Component: 2050 - total flux cleaned = -0.0005754 Jy ! Component: 2100 - total flux cleaned = -0.000575354 Jy ! Component: 2150 - total flux cleaned = -0.000547321 Jy ! Component: 2200 - total flux cleaned = -0.000547182 Jy ! Component: 2250 - total flux cleaned = -0.000493261 Jy ! Component: 2300 - total flux cleaned = -0.000414265 Jy ! Component: 2350 - total flux cleaned = -0.00033754 Jy ! Component: 2400 - total flux cleaned = -0.000286616 Jy ! Component: 2450 - total flux cleaned = -0.000162987 Jy ! Component: 2500 - total flux cleaned = -0.000139139 Jy ! Component: 2550 - total flux cleaned = -0.000115672 Jy ! Component: 2600 - total flux cleaned = -9.19805e-05 Jy ! Component: 2650 - total flux cleaned = 4.81682e-07 Jy ! Component: 2700 - total flux cleaned = 6.79872e-05 Jy ! Component: 2750 - total flux cleaned = 0.00011235 Jy ! Component: 2800 - total flux cleaned = 0.000199534 Jy ! Component: 2850 - total flux cleaned = 0.000263733 Jy ! Component: 2900 - total flux cleaned = 0.00030572 Jy ! Component: 2950 - total flux cleaned = 0.000368146 Jy ! Component: 3000 - total flux cleaned = 0.000429641 Jy ! Component: 3050 - total flux cleaned = 0.000530347 Jy ! Component: 3100 - total flux cleaned = 0.000609478 Jy ! Component: 3150 - total flux cleaned = 0.000687874 Jy ! Component: 3200 - total flux cleaned = 0.000784487 Jy ! Component: 3250 - total flux cleaned = 0.000860645 Jy ! Component: 3300 - total flux cleaned = 0.000917475 Jy ! Component: 3350 - total flux cleaned = 0.000973088 Jy ! Component: 3400 - total flux cleaned = 0.00102796 Jy ! Component: 3450 - total flux cleaned = 0.00106404 Jy ! Component: 3500 - total flux cleaned = 0.00111742 Jy ! Component: 3550 - total flux cleaned = 0.00118772 Jy ! Component: 3600 - total flux cleaned = 0.00122254 Jy ! Component: 3650 - total flux cleaned = 0.00132601 Jy ! Component: 3700 - total flux cleaned = 0.00147909 Jy ! Component: 3750 - total flux cleaned = 0.00151246 Jy ! Component: 3800 - total flux cleaned = 0.00157926 Jy ! Component: 3850 - total flux cleaned = 0.00166186 Jy ! Component: 3900 - total flux cleaned = 0.00179262 Jy ! Component: 3950 - total flux cleaned = 0.00184113 Jy ! Component: 4000 - total flux cleaned = 0.00192137 Jy ! Component: 4050 - total flux cleaned = 0.00201674 Jy ! Total flux subtracted in 4096 components = 0.00211137 Jy ! Clean residual min=-0.000899 max=0.000934 Jy/beam ! Clean residual mean=-0.000002 rms=0.000285 Jy/beam ! Combined flux in latest and established models = 0.238606 Jy keep ! Adding 354 model components to the UV plane model. ! The established model now contains 482 components and 0.238606 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/bp192a1_uvs/J0105+1553_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9176 x 2.241 at -1.123 degrees (North through East) ! Clean map min=-0.0032175 max=0.089 Jy/beam ! Writing clean map to FITS file: /scr/pima/bp192a1_uvs/J0105+1553_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0889997 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000288444 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.972286 0.972286 1.94457 3.88914 7.77829 15.5566 31.1131 62.2263 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.088 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 308.551 quit ! Quitting program ! Log file /scr/pima/bp192a1_uvs/J0105+1553_X_uvs.log closed on Wed Sep 16 13:26:21 2015