! Started logfile: /scr/pima/bp192a1_uvs/J0028+2117_C_uvs.log on Wed Sep 16 13:26:01 2015
obs /scr/pima/bp192a1_uvs/J0028+2117_C_uva.fits
! Reading UV FITS file: /scr/pima/bp192a1_uvs/J0028+2117_C_uva.fits
! AN table 1: 26 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.875214 visibilities/baseline/integration-bin.
! Found source: J0028+2117
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 8192 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp192a1_uvs/J0028+2117_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.002302Jy  sigma=25.166054
! Fit after  self-cal, rms=0.934138Jy  sigma=23.466191
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.304 mas, bmaj=3.586 mas, bpa=-0.9966 degrees
! Estimated noise=0.450502 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0507285 Jy
! Component: 100  -  total flux cleaned = 0.0624592 Jy
! Total flux subtracted in 100 components = 0.0624592 Jy
! Clean residual min=-0.003421 max=0.004363 Jy/beam
! Clean residual mean=0.000000 rms=0.000734 Jy/beam
! Combined flux in latest and established models = 0.0624593 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.0624593 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031073Jy  sigma=0.730871
! Fit after  self-cal, rms=0.031024Jy  sigma=0.729506
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00446783 Jy
! Component: 100  -  total flux cleaned = 0.00659124 Jy
! Total flux subtracted in 100 components = 0.00659124 Jy
! Clean residual min=-0.003177 max=0.002830 Jy/beam
! Clean residual mean=-0.000001 rms=0.000633 Jy/beam
! Combined flux in latest and established models = 0.0690505 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 13 components and 0.0690505 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030379Jy  sigma=0.715942
! Fit after  self-cal, rms=0.030369Jy  sigma=0.715570
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.523 mas, bmaj=4.005 mas, bpa=-1.307 degrees
! Estimated noise=0.315833 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00112897 Jy
! Component: 100  -  total flux cleaned = 0.00159801 Jy
! Component: 150  -  total flux cleaned = 0.00174415 Jy
! Component: 200  -  total flux cleaned = 0.001861 Jy
! Total flux subtracted in 200 components = 0.001861 Jy
! Clean residual min=-0.002343 max=0.002612 Jy/beam
! Clean residual mean=-0.000002 rms=0.000575 Jy/beam
! Combined flux in latest and established models = 0.0709115 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 30 components and 0.0709115 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030307Jy  sigma=0.714859
! Fit after  self-cal, rms=0.030303Jy  sigma=0.714713
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.523 x 4.005 at -1.307 degrees (North through East)
! Clean map  min=-0.0021101  max=0.065434 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.18     HN        1.04     KP        0.93     
!   LA        1.07     MK        0.93     NL        1.10     OV        0.96     
!   PT        1.04     SC        1.02     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.16     FD        1.10     HN        0.99     KP        0.86     
!   LA        1.00     MK        0.88     NL        1.05     OV        0.98     
!   PT        0.94     SC        0.96     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     HN        0.97     KP        0.98     
!   LA        1.04     MK        1.04     NL        1.13     OV        0.98     
!   PT        0.91     SC        0.98     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.01     HN        0.99     KP        0.93     
!   LA        1.15     MK        1.00     NL        1.08     OV        0.93     
!   PT        1.00     SC        1.03     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.96     HN        0.99     KP        0.93     
!   LA        1.07     MK        1.05     NL        1.10     OV        0.93     
!   PT        0.96     SC        0.92     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.00     HN        0.98     KP        0.94     
!   LA        1.05     MK        1.01     NL        1.01     OV        0.93     
!   PT        0.92     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.030303Jy  sigma=0.714713
! Fit after  self-cal, rms=0.029614Jy  sigma=0.701591
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.52 mas, bmaj=4.011 mas, bpa=-1.237 degrees
! Estimated noise=0.31626 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00033202 Jy
! Component: 100  -  total flux cleaned = 0.000347428 Jy
! Component: 150  -  total flux cleaned = 0.000363236 Jy
! Component: 200  -  total flux cleaned = 0.000374746 Jy
! Total flux subtracted in 200 components = 0.000374746 Jy
! Clean residual min=-0.001994 max=0.002291 Jy/beam
! Clean residual mean=-0.000002 rms=0.000459 Jy/beam
! Combined flux in latest and established models = 0.0712862 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 36 components and 0.0712862 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029592Jy  sigma=0.701106
! Fit after  self-cal, rms=0.029589Jy  sigma=0.700937
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029589Jy  sigma=0.700937
! Fit after  self-cal, rms=0.029630Jy  sigma=0.700872
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.516 mas, bmaj=4.009 mas, bpa=-1.254 degrees
! Estimated noise=0.317013 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00030475 Jy
! Component: 100  -  total flux cleaned = 0.000375049 Jy
! Component: 150  -  total flux cleaned = 0.000394355 Jy
! Component: 200  -  total flux cleaned = 0.000412196 Jy
! Total flux subtracted in 200 components = 0.000412196 Jy
! Clean residual min=-0.002009 max=0.002287 Jy/beam
! Clean residual mean=-0.000002 rms=0.000458 Jy/beam
! Combined flux in latest and established models = 0.0716984 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 38 components and 0.0716984 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029618Jy  sigma=0.700648
! Fit after  self-cal, rms=0.029617Jy  sigma=0.700616
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (39, -71.1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000843587 Jy
! Component: 100  -  total flux cleaned = 0.000475726 Jy
! Component: 150  -  total flux cleaned = 0.000352944 Jy
! Component: 200  -  total flux cleaned = 0.000328364 Jy
! Total flux subtracted in 200 components = 0.000328364 Jy
! Clean residual min=-0.001844 max=0.001764 Jy/beam
! Clean residual mean=-0.000002 rms=0.000428 Jy/beam
! Combined flux in latest and established models = 0.0720268 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 59 components and 0.0720268 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029476Jy  sigma=0.696497
! Fit after  self-cal, rms=0.029467Jy  sigma=0.696298
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029467Jy  sigma=0.696298
! Fit after  self-cal, rms=0.029435Jy  sigma=0.696125
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.513 mas, bmaj=4.008 mas, bpa=-1.304 degrees
! Estimated noise=0.317204 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000110323 Jy
! Component: 100  -  total flux cleaned = -0.000154154 Jy
! Component: 150  -  total flux cleaned = -0.000173687 Jy
! Component: 200  -  total flux cleaned = -0.000174693 Jy
! Total flux subtracted in 200 components = -0.000174693 Jy
! Clean residual min=-0.001892 max=0.001721 Jy/beam
! Clean residual mean=-0.000002 rms=0.000423 Jy/beam
! Combined flux in latest and established models = 0.0718521 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 71 components and 0.0718521 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029407Jy  sigma=0.695362
! Fit after  self-cal, rms=0.029407Jy  sigma=0.695334
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.45126e-05 Jy
! Component: 100  -  total flux cleaned = -8.07776e-05 Jy
! Component: 150  -  total flux cleaned = -0.000108848 Jy
! Component: 200  -  total flux cleaned = -0.000162292 Jy
! Total flux subtracted in 200 components = -0.000162292 Jy
! Clean residual min=-0.001891 max=0.001721 Jy/beam
! Clean residual mean=-0.000002 rms=0.000421 Jy/beam
! Combined flux in latest and established models = 0.0716898 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 82 components and 0.0716898 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029394Jy  sigma=0.694991
! Fit after  self-cal, rms=0.029394Jy  sigma=0.694981
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029394Jy  sigma=0.694981
! Fit after  self-cal, rms=0.029400Jy  sigma=0.694928
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.512 mas, bmaj=5.32 mas, bpa=-1.312 degrees
! Estimated noise=0.412814 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000167482 Jy
! Component: 100  -  total flux cleaned = 0.000125129 Jy
! Component: 150  -  total flux cleaned = 0.00012543 Jy
! Component: 200  -  total flux cleaned = 0.000136082 Jy
! Total flux subtracted in 200 components = 0.000136082 Jy
! Clean residual min=-0.001572 max=0.001443 Jy/beam
! Clean residual mean=-0.000004 rms=0.000454 Jy/beam
! Combined flux in latest and established models = 0.0718259 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 90 components and 0.0718259 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029410Jy  sigma=0.695242
! Fit after  self-cal, rms=0.029407Jy  sigma=0.695177
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.84721e-06 Jy
! Component: 100  -  total flux cleaned = -1.44096e-06 Jy
! Component: 150  -  total flux cleaned = -2.06673e-06 Jy
! Component: 200  -  total flux cleaned = -1.96773e-06 Jy
! Total flux subtracted in 200 components = -1.96773e-06 Jy
! Clean residual min=-0.001548 max=0.001416 Jy/beam
! Clean residual mean=-0.000004 rms=0.000448 Jy/beam
! Combined flux in latest and established models = 0.0718239 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 99 components and 0.0718239 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029418Jy  sigma=0.695489
! Fit after  self-cal, rms=0.029416Jy  sigma=0.695455
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.512 mas, bmaj=4.005 mas, bpa=-1.3 degrees
! Estimated noise=0.317539 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.512 x 4.005 at -1.3 degrees (North through East)
! Clean map  min=-0.0017439  max=0.065811 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.296 mas, bmaj=3.584 mas, bpa=-1.02 degrees
! Estimated noise=0.454783 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0507411 Jy
! Component: 100  -  total flux cleaned = 0.0628411 Jy
! Component: 150  -  total flux cleaned = 0.0676954 Jy
! Component: 200  -  total flux cleaned = 0.0697321 Jy
! Total flux subtracted in 200 components = 0.0697321 Jy
! Clean residual min=-0.002814 max=0.002698 Jy/beam
! Clean residual mean=-0.000001 rms=0.000583 Jy/beam
! Combined flux in latest and established models = 0.0697321 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.0697321 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.512 mas, bmaj=4.005 mas, bpa=-1.3 degrees
! Estimated noise=0.317539 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00103523 Jy
! Component: 100  -  total flux cleaned = 0.00157218 Jy
! Component: 150  -  total flux cleaned = 0.00185227 Jy
! Component: 200  -  total flux cleaned = 0.00204379 Jy
! Total flux subtracted in 200 components = 0.00204379 Jy
! Clean residual min=-0.001913 max=0.001804 Jy/beam
! Clean residual mean=-0.000001 rms=0.000434 Jy/beam
! Combined flux in latest and established models = 0.0717758 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 32 components and 0.0717759 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.512 mas, bmaj=5.32 mas, bpa=-1.312 degrees
! Estimated noise=0.412814 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000360893 Jy
! Component: 100  -  total flux cleaned = 0.000300846 Jy
! Component: 150  -  total flux cleaned = 0.000218104 Jy
! Component: 200  -  total flux cleaned = 0.000175904 Jy
! Total flux subtracted in 200 components = 0.000175904 Jy
! Clean residual min=-0.001555 max=0.001421 Jy/beam
! Clean residual mean=-0.000004 rms=0.000446 Jy/beam
! Combined flux in latest and established models = 0.0719518 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.93864e-05 Jy
! Component: 100  -  total flux cleaned = -3.79013e-05 Jy
! Component: 150  -  total flux cleaned = -6.4413e-05 Jy
! Component: 200  -  total flux cleaned = -8.09272e-05 Jy
! Total flux subtracted in 200 components = -8.09272e-05 Jy
! Clean residual min=-0.001543 max=0.001394 Jy/beam
! Clean residual mean=-0.000004 rms=0.000445 Jy/beam
! Combined flux in latest and established models = 0.0718708 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 58 components and 0.0718708 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.512 mas, bmaj=4.005 mas, bpa=-1.3 degrees
! Estimated noise=0.317539 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.14464e-05 Jy
! Component: 100  -  total flux cleaned = 1.33155e-05 Jy
! Component: 150  -  total flux cleaned = 3.72552e-05 Jy
! Component: 200  -  total flux cleaned = 3.74839e-05 Jy
! Total flux subtracted in 200 components = 3.74839e-05 Jy
! Clean residual min=-0.001862 max=0.001691 Jy/beam
! Clean residual mean=-0.000002 rms=0.000424 Jy/beam
! Combined flux in latest and established models = 0.0719083 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 72 components and 0.0719083 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029427Jy  sigma=0.695916
! Fit after  self-cal, rms=0.029424Jy  sigma=0.695834
wmodel /scr/pima/bp192a1_uvs/J0028+2117_C_map.mod
! Writing 72 model components to file: /scr/pima/bp192a1_uvs/J0028+2117_C_map.mod
wobs /scr/pima/bp192a1_uvs/J0028+2117_C_uvs.fits
! Writing UV FITS file: /scr/pima/bp192a1_uvs/J0028+2117_C_uvs.fits
wwins /scr/pima/bp192a1_uvs/J0028+2117_C_map.win
! wwins: Wrote 2 windows to /scr/pima/bp192a1_uvs/J0028+2117_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000550572 Jy
! Component: 100  -  total flux cleaned = -0.000549863 Jy
! Component: 150  -  total flux cleaned = -0.000579111 Jy
! Component: 200  -  total flux cleaned = -0.000496334 Jy
! Component: 250  -  total flux cleaned = -0.000390022 Jy
! Component: 300  -  total flux cleaned = -0.000338587 Jy
! Component: 350  -  total flux cleaned = -0.000214728 Jy
! Component: 400  -  total flux cleaned = -7.15876e-05 Jy
! Component: 450  -  total flux cleaned = 2.13042e-05 Jy
! Component: 500  -  total flux cleaned = 0.000112263 Jy
! Component: 550  -  total flux cleaned = 0.00020108 Jy
! Component: 600  -  total flux cleaned = 0.000330983 Jy
! Component: 650  -  total flux cleaned = 0.000394153 Jy
! Component: 700  -  total flux cleaned = 0.000414696 Jy
! Component: 750  -  total flux cleaned = 0.000495262 Jy
! Component: 800  -  total flux cleaned = 0.000515008 Jy
! Component: 850  -  total flux cleaned = 0.000611462 Jy
! Component: 900  -  total flux cleaned = 0.000630046 Jy
! Component: 950  -  total flux cleaned = 0.000666961 Jy
! Component: 1000  -  total flux cleaned = 0.000739533 Jy
! Component: 1050  -  total flux cleaned = 0.000792959 Jy
! Component: 1100  -  total flux cleaned = 0.000845544 Jy
! Component: 1150  -  total flux cleaned = 0.00091408 Jy
! Component: 1200  -  total flux cleaned = 0.000998474 Jy
! Component: 1250  -  total flux cleaned = 0.00106457 Jy
! Component: 1300  -  total flux cleaned = 0.00109688 Jy
! Component: 1350  -  total flux cleaned = 0.00112909 Jy
! Component: 1400  -  total flux cleaned = 0.00114486 Jy
! Component: 1450  -  total flux cleaned = 0.00116052 Jy
! Component: 1500  -  total flux cleaned = 0.00120617 Jy
! Component: 1550  -  total flux cleaned = 0.00119086 Jy
! Component: 1600  -  total flux cleaned = 0.00117607 Jy
! Component: 1650  -  total flux cleaned = 0.00114734 Jy
! Component: 1700  -  total flux cleaned = 0.00119036 Jy
! Component: 1750  -  total flux cleaned = 0.00117586 Jy
! Component: 1800  -  total flux cleaned = 0.00116189 Jy
! Component: 1850  -  total flux cleaned = 0.00117561 Jy
! Component: 1900  -  total flux cleaned = 0.00116197 Jy
! Component: 1950  -  total flux cleaned = 0.0011886 Jy
! Component: 2000  -  total flux cleaned = 0.00114906 Jy
! Component: 2050  -  total flux cleaned = 0.00113611 Jy
! Component: 2100  -  total flux cleaned = 0.00111069 Jy
! Component: 2150  -  total flux cleaned = 0.00113613 Jy
! Component: 2200  -  total flux cleaned = 0.00117351 Jy
! Component: 2250  -  total flux cleaned = 0.00116104 Jy
! Component: 2300  -  total flux cleaned = 0.00119775 Jy
! Component: 2350  -  total flux cleaned = 0.00118564 Jy
! Component: 2400  -  total flux cleaned = 0.0012095 Jy
! Component: 2450  -  total flux cleaned = 0.00124502 Jy
! Component: 2500  -  total flux cleaned = 0.00124498 Jy
! Component: 2550  -  total flux cleaned = 0.0012681 Jy
! Component: 2600  -  total flux cleaned = 0.0012681 Jy
! Component: 2650  -  total flux cleaned = 0.00130199 Jy
! Component: 2700  -  total flux cleaned = 0.0013243 Jy
! Component: 2750  -  total flux cleaned = 0.00133533 Jy
! Component: 2800  -  total flux cleaned = 0.00133528 Jy
! Component: 2850  -  total flux cleaned = 0.00134607 Jy
! Component: 2900  -  total flux cleaned = 0.00137831 Jy
! Component: 2950  -  total flux cleaned = 0.00134632 Jy
! Component: 3000  -  total flux cleaned = 0.00134626 Jy
! Component: 3050  -  total flux cleaned = 0.00137768 Jy
! Component: 3100  -  total flux cleaned = 0.00139844 Jy
! Component: 3150  -  total flux cleaned = 0.00136751 Jy
! Component: 3200  -  total flux cleaned = 0.00139823 Jy
! Component: 3250  -  total flux cleaned = 0.00138804 Jy
! Component: 3300  -  total flux cleaned = 0.00136814 Jy
! Component: 3350  -  total flux cleaned = 0.001378 Jy
! Component: 3400  -  total flux cleaned = 0.00135828 Jy
! Component: 3450  -  total flux cleaned = 0.00136801 Jy
! Component: 3500  -  total flux cleaned = 0.00134862 Jy
! Component: 3550  -  total flux cleaned = 0.00137725 Jy
! Component: 3600  -  total flux cleaned = 0.00134876 Jy
! Component: 3650  -  total flux cleaned = 0.00134879 Jy
! Component: 3700  -  total flux cleaned = 0.00133014 Jy
! Component: 3750  -  total flux cleaned = 0.00133012 Jy
! Component: 3800  -  total flux cleaned = 0.00132094 Jy
! Component: 3850  -  total flux cleaned = 0.00130288 Jy
! Component: 3900  -  total flux cleaned = 0.00133002 Jy
! Component: 3950  -  total flux cleaned = 0.0013479 Jy
! Component: 4000  -  total flux cleaned = 0.00135681 Jy
! Component: 4050  -  total flux cleaned = 0.00135682 Jy
! Total flux subtracted in 4096 components = 0.00135681 Jy
! Clean residual min=-0.000457 max=0.000468 Jy/beam
! Clean residual mean=-0.000001 rms=0.000159 Jy/beam
! Combined flux in latest and established models = 0.0732651 Jy
keep
! Adding 336 model components to the UV plane model.
! The established model now contains 408 components and 0.0732651 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bp192a1_uvs/J0028+2117_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.512 x 4.005 at -1.3 degrees (North through East)
! Clean map  min=-0.0012064  max=0.065819 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp192a1_uvs/J0028+2117_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0658192 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000156435 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.713022 0.713022 1.42604 2.85209 5.70418 11.4084 22.8167 45.6334 91.2668
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.065 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  420.744 
quit
! Quitting program
! Log file /scr/pima/bp192a1_uvs/J0028+2117_C_uvs.log closed on Wed Sep 16 13:26:05 2015