! Started logfile: /scr/pima/bp192a0_uvs/J2346+3011_C_uvs.log on Fri Aug 21 07:26:29 2015
obs /scr/pima/bp192a0_uvs/J2346+3011_C_uva.fits
! Reading UV FITS file: /scr/pima/bp192a0_uvs/J2346+3011_C_uva.fits
! AN table 1: 153 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.503849 visibilities/baseline/integration-bin.
! Found source: J2346+3011
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 27752 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp192a0_uvs/J2346+3011_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 525 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 525 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 525 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 525 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 525 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 525 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 525 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 525 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.007204Jy  sigma=26.891463
! Fit after  self-cal, rms=0.838108Jy  sigma=22.432017
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.432 mas, bmaj=3.599 mas, bpa=-9.868 degrees
! Estimated noise=0.277914 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.120729 Jy
! Component: 100  -  total flux cleaned = 0.153453 Jy
! Total flux subtracted in 100 components = 0.153453 Jy
! Clean residual min=-0.016312 max=0.053836 Jy/beam
! Clean residual mean=-0.000006 rms=0.003868 Jy/beam
! Combined flux in latest and established models = 0.153453 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.153453 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.090870Jy  sigma=2.324361
! Fit after  self-cal, rms=0.089825Jy  sigma=2.298997
! Inverting map 
! Added new window around map position (12.6, -13.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0431558 Jy
! Component: 100  -  total flux cleaned = 0.058918 Jy
! Total flux subtracted in 100 components = 0.058918 Jy
! Clean residual min=-0.012801 max=0.034243 Jy/beam
! Clean residual mean=-0.000006 rms=0.002525 Jy/beam
! Combined flux in latest and established models = 0.212371 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 21 components and 0.212371 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.064229Jy  sigma=1.623926
! Fit after  self-cal, rms=0.056377Jy  sigma=1.401325
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0210128 Jy
! Component: 100  -  total flux cleaned = 0.0277232 Jy
! Total flux subtracted in 100 components = 0.0277232 Jy
! Clean residual min=-0.007138 max=0.014643 Jy/beam
! Clean residual mean=-0.000006 rms=0.001488 Jy/beam
! Combined flux in latest and established models = 0.240094 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 28 components and 0.240094 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.046489Jy  sigma=1.152118
! Fit after  self-cal, rms=0.044518Jy  sigma=1.092456
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00974059 Jy
! Component: 100  -  total flux cleaned = 0.0116243 Jy
! Total flux subtracted in 100 components = 0.0116243 Jy
! Clean residual min=-0.005207 max=0.007240 Jy/beam
! Clean residual mean=-0.000005 rms=0.001165 Jy/beam
! Combined flux in latest and established models = 0.251718 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 39 components and 0.251718 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.041468Jy  sigma=1.024682
! Fit after  self-cal, rms=0.041096Jy  sigma=1.012587
! Inverting map 
! Added new window around map position (16.8, -17.7).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00589957 Jy
! Component: 100  -  total flux cleaned = 0.00818546 Jy
! Total flux subtracted in 100 components = 0.00818546 Jy
! Clean residual min=-0.004782 max=0.004903 Jy/beam
! Clean residual mean=-0.000005 rms=0.001022 Jy/beam
! Combined flux in latest and established models = 0.259904 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 51 components and 0.259904 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039152Jy  sigma=0.962525
! Fit after  self-cal, rms=0.038969Jy  sigma=0.957757
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.736 mas, bmaj=4.007 mas, bpa=-8.824 degrees
! Estimated noise=0.162911 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00693333 Jy
! Component: 100  -  total flux cleaned = 0.0100907 Jy
! Component: 150  -  total flux cleaned = 0.0121533 Jy
! Component: 200  -  total flux cleaned = 0.0135087 Jy
! Total flux subtracted in 200 components = 0.0135087 Jy
! Clean residual min=-0.004236 max=0.004850 Jy/beam
! Clean residual mean=-0.000007 rms=0.001183 Jy/beam
! Combined flux in latest and established models = 0.273412 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 71 components and 0.273412 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.037173Jy  sigma=0.917079
! Fit after  self-cal, rms=0.036971Jy  sigma=0.911495
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.736 x 4.007 at -8.824 degrees (North through East)
! Clean map  min=-0.0043299  max=0.14042 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 54 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.14     HN        0.99     KP        0.86     
!   LA        1.03     MK        1.04     NL        0.95     OV        1.02     
!   PT        0.84     SC        1.03     
! 
! 
! Correcting IF 2.
!  A total of 54 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.12     HN        1.00     KP        0.90     
!   LA        1.08     MK        0.96     NL        1.00     OV        1.07     
!   PT        0.94     SC        1.03     
! 
! 
! Correcting IF 3.
!  A total of 54 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.01     HN        1.00     KP        0.88     
!   LA        1.04     MK        0.91     NL        0.99     OV        1.04     
!   PT        0.93     SC        1.02     
! 
! 
! Correcting IF 4.
!  A total of 54 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 5.
!  A total of 54 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.02     HN        1.03     KP        0.95     
!   LA        1.08     MK        1.02     NL        1.06     OV        1.02     
!   PT        0.91     SC        1.03     
! 
! 
! Correcting IF 6.
!  A total of 54 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 7.
!  A total of 54 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.92     HN        1.00     KP        0.93     
!   LA        1.10     MK        1.00     NL        1.00     OV        1.03     
!   PT        0.95     SC        0.98     
! 
! 
! Correcting IF 8.
!  A total of 54 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.98     HN        1.03     KP        0.94     
!   LA        1.10     MK        1.00     NL        0.97     OV        1.06     
!   PT        0.93     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.036971Jy  sigma=0.911495
! Fit after  self-cal, rms=0.033470Jy  sigma=0.827196
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.769 mas, bmaj=4.006 mas, bpa=-8.891 degrees
! Estimated noise=0.164388 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (5.7, -1.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0025827 Jy
! Component: 100  -  total flux cleaned = 0.00370581 Jy
! Component: 150  -  total flux cleaned = 0.00443243 Jy
! Component: 200  -  total flux cleaned = 0.00480996 Jy
! Total flux subtracted in 200 components = 0.00480996 Jy
! Clean residual min=-0.002701 max=0.002494 Jy/beam
! Clean residual mean=-0.000006 rms=0.000645 Jy/beam
! Combined flux in latest and established models = 0.278222 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 86 components and 0.278223 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032790Jy  sigma=0.808377
! Fit after  self-cal, rms=0.032739Jy  sigma=0.806819
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032739Jy  sigma=0.806819
! Fit after  self-cal, rms=0.032020Jy  sigma=0.764014
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.768 mas, bmaj=4.007 mas, bpa=-8.891 degrees
! Estimated noise=0.166048 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00285912 Jy
! Component: 100  -  total flux cleaned = 0.00421396 Jy
! Component: 150  -  total flux cleaned = 0.0047439 Jy
! Component: 200  -  total flux cleaned = 0.00510585 Jy
! Total flux subtracted in 200 components = 0.00510585 Jy
! Clean residual min=-0.002161 max=0.002022 Jy/beam
! Clean residual mean=-0.000006 rms=0.000510 Jy/beam
! Combined flux in latest and established models = 0.283328 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 105 components and 0.283328 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031653Jy  sigma=0.755743
! Fit after  self-cal, rms=0.031617Jy  sigma=0.754749
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000313103 Jy
! Component: 100  -  total flux cleaned = 0.000515052 Jy
! Component: 150  -  total flux cleaned = 0.000561968 Jy
! Component: 200  -  total flux cleaned = 0.000642762 Jy
! Total flux subtracted in 200 components = 0.000642762 Jy
! Clean residual min=-0.001953 max=0.001944 Jy/beam
! Clean residual mean=-0.000006 rms=0.000484 Jy/beam
! Combined flux in latest and established models = 0.283971 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 110 components and 0.283971 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031469Jy  sigma=0.751265
! Fit after  self-cal, rms=0.031454Jy  sigma=0.750747
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031454Jy  sigma=0.750747
! Fit after  self-cal, rms=0.031512Jy  sigma=0.747127
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.765 mas, bmaj=3.998 mas, bpa=-8.819 degrees
! Estimated noise=0.167267 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00211999 Jy
! Component: 100  -  total flux cleaned = 0.00338659 Jy
! Component: 150  -  total flux cleaned = 0.00382502 Jy
! Component: 200  -  total flux cleaned = 0.00396169 Jy
! Total flux subtracted in 200 components = 0.00396169 Jy
! Clean residual min=-0.001926 max=0.001847 Jy/beam
! Clean residual mean=-0.000006 rms=0.000460 Jy/beam
! Combined flux in latest and established models = 0.287933 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 120 components and 0.287933 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031313Jy  sigma=0.743190
! Fit after  self-cal, rms=0.031297Jy  sigma=0.742717
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000304328 Jy
! Component: 100  -  total flux cleaned = 0.000337152 Jy
! Component: 150  -  total flux cleaned = 0.00033798 Jy
! Component: 200  -  total flux cleaned = 0.000366515 Jy
! Total flux subtracted in 200 components = 0.000366515 Jy
! Clean residual min=-0.001858 max=0.001793 Jy/beam
! Clean residual mean=-0.000006 rms=0.000447 Jy/beam
! Combined flux in latest and established models = 0.288299 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 130 components and 0.288299 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031227Jy  sigma=0.741154
! Fit after  self-cal, rms=0.031221Jy  sigma=0.740938
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031221Jy  sigma=0.740938
! Fit after  self-cal, rms=0.031310Jy  sigma=0.739328
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.821 mas, bmaj=5.327 mas, bpa=-12.75 degrees
! Estimated noise=0.203546 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00207593 Jy
! Component: 100  -  total flux cleaned = 0.00318091 Jy
! Component: 150  -  total flux cleaned = 0.00347764 Jy
! Component: 200  -  total flux cleaned = 0.00357891 Jy
! Total flux subtracted in 200 components = 0.00357891 Jy
! Clean residual min=-0.002450 max=0.002423 Jy/beam
! Clean residual mean=-0.000011 rms=0.000672 Jy/beam
! Combined flux in latest and established models = 0.291878 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 149 components and 0.291878 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031212Jy  sigma=0.737548
! Fit after  self-cal, rms=0.031199Jy  sigma=0.737206
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000202958 Jy
! Component: 100  -  total flux cleaned = 0.000181741 Jy
! Component: 150  -  total flux cleaned = 0.000143039 Jy
! Component: 200  -  total flux cleaned = 0.000107817 Jy
! Total flux subtracted in 200 components = 0.000107817 Jy
! Clean residual min=-0.002387 max=0.002402 Jy/beam
! Clean residual mean=-0.000011 rms=0.000664 Jy/beam
! Combined flux in latest and established models = 0.291986 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 164 components and 0.291986 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031183Jy  sigma=0.736878
! Fit after  self-cal, rms=0.031178Jy  sigma=0.736782
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.761 mas, bmaj=3.993 mas, bpa=-8.784 degrees
! Estimated noise=0.168306 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.761 x 3.993 at -8.784 degrees (North through East)
! Clean map  min=-0.0016713  max=0.14027 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.445 mas, bmaj=3.598 mas, bpa=-9.91 degrees
! Estimated noise=0.290408 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.133931 Jy
! Component: 100  -  total flux cleaned = 0.190934 Jy
! Component: 150  -  total flux cleaned = 0.217716 Jy
! Component: 200  -  total flux cleaned = 0.234508 Jy
! Total flux subtracted in 200 components = 0.234508 Jy
! Clean residual min=-0.005173 max=0.009219 Jy/beam
! Clean residual mean=-0.000008 rms=0.001171 Jy/beam
! Combined flux in latest and established models = 0.234508 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.234508 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.761 mas, bmaj=3.993 mas, bpa=-8.784 degrees
! Estimated noise=0.168306 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0161467 Jy
! Component: 100  -  total flux cleaned = 0.0265498 Jy
! Component: 150  -  total flux cleaned = 0.0334828 Jy
! Component: 200  -  total flux cleaned = 0.0385905 Jy
! Total flux subtracted in 200 components = 0.0385905 Jy
! Clean residual min=-0.003072 max=0.004390 Jy/beam
! Clean residual mean=-0.000008 rms=0.000693 Jy/beam
! Combined flux in latest and established models = 0.273098 Jy
! Adding 49 model components to the UV plane model.
! The established model now contains 57 components and 0.273098 Jy
! Inverting map 
! Added new window around map position (2.1, -2.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00437538 Jy
! Component: 100  -  total flux cleaned = 0.00760039 Jy
! Component: 150  -  total flux cleaned = 0.0101914 Jy
! Component: 200  -  total flux cleaned = 0.0122905 Jy
! Total flux subtracted in 200 components = 0.0122905 Jy
! Clean residual min=-0.002387 max=0.002074 Jy/beam
! Clean residual mean=-0.000007 rms=0.000476 Jy/beam
! Combined flux in latest and established models = 0.285389 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 88 components and 0.285389 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.821 mas, bmaj=5.327 mas, bpa=-12.75 degrees
! Estimated noise=0.203546 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00259159 Jy
! Component: 100  -  total flux cleaned = 0.00428748 Jy
! Component: 150  -  total flux cleaned = 0.00518389 Jy
! Component: 200  -  total flux cleaned = 0.00565972 Jy
! Total flux subtracted in 200 components = 0.00565972 Jy
! Clean residual min=-0.002745 max=0.002475 Jy/beam
! Clean residual mean=-0.000011 rms=0.000670 Jy/beam
! Combined flux in latest and established models = 0.291048 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000264656 Jy
! Component: 100  -  total flux cleaned = 0.000408903 Jy
! Component: 150  -  total flux cleaned = 0.000560028 Jy
! Component: 200  -  total flux cleaned = 0.000670877 Jy
! Total flux subtracted in 200 components = 0.000670877 Jy
! Clean residual min=-0.002570 max=0.002441 Jy/beam
! Clean residual mean=-0.000011 rms=0.000657 Jy/beam
! Combined flux in latest and established models = 0.291719 Jy
! Adding 57 model components to the UV plane model.
! The established model now contains 136 components and 0.291719 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.761 mas, bmaj=3.993 mas, bpa=-8.784 degrees
! Estimated noise=0.168306 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000105854 Jy
! Component: 100  -  total flux cleaned = 3.9209e-06 Jy
! Component: 150  -  total flux cleaned = 0.000104903 Jy
! Component: 200  -  total flux cleaned = 0.000195552 Jy
! Total flux subtracted in 200 components = 0.000195552 Jy
! Clean residual min=-0.001858 max=0.001592 Jy/beam
! Clean residual mean=-0.000006 rms=0.000418 Jy/beam
! Combined flux in latest and established models = 0.291915 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 156 components and 0.291915 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031079Jy  sigma=0.734311
! Fit after  self-cal, rms=0.031021Jy  sigma=0.732775
wmodel /scr/pima/bp192a0_uvs/J2346+3011_C_map.mod
! Writing 156 model components to file: /scr/pima/bp192a0_uvs/J2346+3011_C_map.mod
wobs /scr/pima/bp192a0_uvs/J2346+3011_C_uvs.fits
! Writing UV FITS file: /scr/pima/bp192a0_uvs/J2346+3011_C_uvs.fits
wwins /scr/pima/bp192a0_uvs/J2346+3011_C_map.win
! wwins: Wrote 5 windows to /scr/pima/bp192a0_uvs/J2346+3011_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000213989 Jy
! Component: 100  -  total flux cleaned = -0.000187933 Jy
! Component: 150  -  total flux cleaned = -0.000138645 Jy
! Component: 200  -  total flux cleaned = -6.79675e-05 Jy
! Component: 250  -  total flux cleaned = 7.01433e-05 Jy
! Component: 300  -  total flux cleaned = 0.000203509 Jy
! Component: 350  -  total flux cleaned = 0.000355116 Jy
! Component: 400  -  total flux cleaned = 0.000502467 Jy
! Component: 450  -  total flux cleaned = 0.000584937 Jy
! Component: 500  -  total flux cleaned = 0.000685773 Jy
! Component: 550  -  total flux cleaned = 0.000705593 Jy
! Component: 600  -  total flux cleaned = 0.000783356 Jy
! Component: 650  -  total flux cleaned = 0.000840215 Jy
! Component: 700  -  total flux cleaned = 0.000896213 Jy
! Component: 750  -  total flux cleaned = 0.000950768 Jy
! Component: 800  -  total flux cleaned = 0.000896848 Jy
! Component: 850  -  total flux cleaned = 0.000967915 Jy
! Component: 900  -  total flux cleaned = 0.00101984 Jy
! Component: 950  -  total flux cleaned = 0.00103696 Jy
! Component: 1000  -  total flux cleaned = 0.0010367 Jy
! Component: 1050  -  total flux cleaned = 0.00103668 Jy
! Component: 1100  -  total flux cleaned = 0.00105284 Jy
! Component: 1150  -  total flux cleaned = 0.00102059 Jy
! Component: 1200  -  total flux cleaned = 0.00102107 Jy
! Component: 1250  -  total flux cleaned = 0.00103651 Jy
! Component: 1300  -  total flux cleaned = 0.00106704 Jy
! Component: 1350  -  total flux cleaned = 0.00103652 Jy
! Component: 1400  -  total flux cleaned = 0.00103649 Jy
! Component: 1450  -  total flux cleaned = 0.00100704 Jy
! Component: 1500  -  total flux cleaned = 0.00102181 Jy
! Component: 1550  -  total flux cleaned = 0.00106494 Jy
! Component: 1600  -  total flux cleaned = 0.00102228 Jy
! Component: 1650  -  total flux cleaned = 0.00103604 Jy
! Component: 1700  -  total flux cleaned = 0.00100803 Jy
! Component: 1750  -  total flux cleaned = 0.00102184 Jy
! Component: 1800  -  total flux cleaned = 0.00102187 Jy
! Component: 1850  -  total flux cleaned = 0.000995086 Jy
! Component: 1900  -  total flux cleaned = 0.000995328 Jy
! Component: 1950  -  total flux cleaned = 0.00106054 Jy
! Component: 2000  -  total flux cleaned = 0.00100911 Jy
! Component: 2050  -  total flux cleaned = 0.00102167 Jy
! Component: 2100  -  total flux cleaned = 0.00099653 Jy
! Component: 2150  -  total flux cleaned = 0.0010589 Jy
! Component: 2200  -  total flux cleaned = 0.00104635 Jy
! Component: 2250  -  total flux cleaned = 0.00103413 Jy
! Component: 2300  -  total flux cleaned = 0.00103407 Jy
! Component: 2350  -  total flux cleaned = 0.00104617 Jy
! Component: 2400  -  total flux cleaned = 0.00115275 Jy
! Component: 2450  -  total flux cleaned = 0.00108216 Jy
! Component: 2500  -  total flux cleaned = 0.00108223 Jy
! Component: 2550  -  total flux cleaned = 0.00112815 Jy
! Component: 2600  -  total flux cleaned = 0.0011737 Jy
! Component: 2650  -  total flux cleaned = 0.00117371 Jy
! Component: 2700  -  total flux cleaned = 0.00121844 Jy
! Component: 2750  -  total flux cleaned = 0.00120735 Jy
! Component: 2800  -  total flux cleaned = 0.00124029 Jy
! Component: 2850  -  total flux cleaned = 0.00125129 Jy
! Component: 2900  -  total flux cleaned = 0.00125118 Jy
! Component: 2950  -  total flux cleaned = 0.00126195 Jy
! Component: 3000  -  total flux cleaned = 0.00124075 Jy
! Component: 3050  -  total flux cleaned = 0.00127229 Jy
! Component: 3100  -  total flux cleaned = 0.00128277 Jy
! Component: 3150  -  total flux cleaned = 0.00126221 Jy
! Component: 3200  -  total flux cleaned = 0.00129308 Jy
! Component: 3250  -  total flux cleaned = 0.00129305 Jy
! Component: 3300  -  total flux cleaned = 0.00127273 Jy
! Component: 3350  -  total flux cleaned = 0.0012527 Jy
! Component: 3400  -  total flux cleaned = 0.00126261 Jy
! Component: 3450  -  total flux cleaned = 0.00129209 Jy
! Component: 3500  -  total flux cleaned = 0.00128239 Jy
! Component: 3550  -  total flux cleaned = 0.00127271 Jy
! Component: 3600  -  total flux cleaned = 0.00130153 Jy
! Component: 3650  -  total flux cleaned = 0.00129192 Jy
! Component: 3700  -  total flux cleaned = 0.00124466 Jy
! Component: 3750  -  total flux cleaned = 0.00118828 Jy
! Component: 3800  -  total flux cleaned = 0.00122563 Jy
! Component: 3850  -  total flux cleaned = 0.00119794 Jy
! Component: 3900  -  total flux cleaned = 0.00115213 Jy
! Component: 3950  -  total flux cleaned = 0.00117039 Jy
! Component: 4000  -  total flux cleaned = 0.00115219 Jy
! Component: 4050  -  total flux cleaned = 0.00110725 Jy
! Total flux subtracted in 4096 components = 0.0011252 Jy
! Clean residual min=-0.000527 max=0.000491 Jy/beam
! Clean residual mean=-0.000003 rms=0.000170 Jy/beam
! Combined flux in latest and established models = 0.29304 Jy
keep
! Adding 351 model components to the UV plane model.
! The established model now contains 507 components and 0.29304 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bp192a0_uvs/J2346+3011_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.761 x 3.993 at -8.784 degrees (North through East)
! Clean map  min=-0.0011283  max=0.14005 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp192a0_uvs/J2346+3011_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.140051 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000167907 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.35967 0.35967 0.719341 1.43868 2.87736 5.75472 11.5094 23.0189 46.0378 92.0756
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.14 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  834.097 
quit
! Quitting program
! Log file /scr/pima/bp192a0_uvs/J2346+3011_C_uvs.log closed on Fri Aug 21 07:26:35 2015