! Started logfile: /scr/pima/bp192a0_uvs/J2332+4030_X_uvs.log on Fri Aug 21 06:53:27 2015
obs /scr/pima/bp192a0_uvs/J2332+4030_X_uva.fits
! Reading UV FITS file: /scr/pima/bp192a0_uvs/J2332+4030_X_uva.fits
! AN table 1: 40 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.556111 visibilities/baseline/integration-bin.
! Found source: J2332+4030
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 8008 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp192a0_uvs/J2332+4030_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 159 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 159 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 159 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 159 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 159 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 159 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 159 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 159 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.003942Jy  sigma=21.707851
! Fit after  self-cal, rms=0.914873Jy  sigma=19.779386
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7403 mas, bmaj=2.328 mas, bpa=-3.312 degrees
! Estimated noise=0.722055 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0622075 Jy
! Component: 100  -  total flux cleaned = 0.0878713 Jy
! Total flux subtracted in 100 components = 0.0878713 Jy
! Clean residual min=-0.007241 max=0.012094 Jy/beam
! Clean residual mean=-0.000003 rms=0.001980 Jy/beam
! Combined flux in latest and established models = 0.0878713 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.0878713 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.052666Jy  sigma=0.977160
! Fit after  self-cal, rms=0.052206Jy  sigma=0.971095
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0143706 Jy
! Component: 100  -  total flux cleaned = 0.0230998 Jy
! Total flux subtracted in 100 components = 0.0230998 Jy
! Clean residual min=-0.005721 max=0.006160 Jy/beam
! Clean residual mean=-0.000001 rms=0.001405 Jy/beam
! Combined flux in latest and established models = 0.110971 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 20 components and 0.110971 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.046457Jy  sigma=0.823805
! Fit after  self-cal, rms=0.046388Jy  sigma=0.822163
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8525 mas, bmaj=2.493 mas, bpa=-2.297 degrees
! Estimated noise=0.372819 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1, 0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00966515 Jy
! Component: 100  -  total flux cleaned = 0.0159606 Jy
! Component: 150  -  total flux cleaned = 0.0205357 Jy
! Component: 200  -  total flux cleaned = 0.0239681 Jy
! Total flux subtracted in 200 components = 0.0239681 Jy
! Clean residual min=-0.004411 max=0.004129 Jy/beam
! Clean residual mean=0.000003 rms=0.001115 Jy/beam
! Combined flux in latest and established models = 0.134939 Jy
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 63 components and 0.134939 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.043793Jy  sigma=0.759008
! Fit after  self-cal, rms=0.043653Jy  sigma=0.756500
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8525 x 2.493 at -2.297 degrees (North through East)
! Clean map  min=-0.0040617  max=0.084078 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.16     FD        1.12     HN        0.91     KP        0.89     
!   LA        0.96     MK        1.01     NL        0.93     OV        0.97     
!   PT        0.84     SC        1.01     
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.84     FD        1.04     HN        0.94     KP        1.14     
!   LA        0.88     MK        1.16     NL        0.97     OV        1.00     
!   PT        0.87     SC        1.00     
! 
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.05     HN        1.03     KP        1.01     
!   LA        0.94     MK        1.17     NL        0.91     OV        0.98     
!   PT        0.91     SC        1.06     
! 
! 
! Correcting IF 5.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.98     HN        1.02     KP        1.10     
!   LA        0.94     MK        1.00     NL        1.08     OV        0.98     
!   PT        0.91     SC        1.02     
! 
! 
! Correcting IF 6.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        1.04     KP        1.17     
!   LA        0.99     MK        1.03     NL        1.14     OV        1.07     
!   PT        0.93     SC        1.01     
! 
! 
! Correcting IF 7.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.03     HN        1.02     KP        1.12     
!   LA        0.95     MK        1.08     NL        0.89     OV        1.04     
!   PT        0.90     SC        1.02     
! 
! 
! Correcting IF 8.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.043653Jy  sigma=0.756500
! Fit after  self-cal, rms=0.040629Jy  sigma=0.728012
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8701 mas, bmaj=2.503 mas, bpa=-2.271 degrees
! Estimated noise=0.374869 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00261424 Jy
! Component: 100  -  total flux cleaned = 0.00384611 Jy
! Component: 150  -  total flux cleaned = 0.00476362 Jy
! Component: 200  -  total flux cleaned = 0.00542238 Jy
! Total flux subtracted in 200 components = 0.00542238 Jy
! Clean residual min=-0.004107 max=0.003514 Jy/beam
! Clean residual mean=0.000003 rms=0.000845 Jy/beam
! Combined flux in latest and established models = 0.140361 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 77 components and 0.140361 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.040387Jy  sigma=0.723149
! Fit after  self-cal, rms=0.040357Jy  sigma=0.722512
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.040357Jy  sigma=0.722512
! Fit after  self-cal, rms=0.039902Jy  sigma=0.715130
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8704 mas, bmaj=2.501 mas, bpa=-2.381 degrees
! Estimated noise=0.373212 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000465994 Jy
! Component: 100  -  total flux cleaned = 0.000727331 Jy
! Component: 150  -  total flux cleaned = 0.000913889 Jy
! Component: 200  -  total flux cleaned = 0.00101622 Jy
! Total flux subtracted in 200 components = 0.00101622 Jy
! Clean residual min=-0.004025 max=0.003484 Jy/beam
! Clean residual mean=0.000003 rms=0.000808 Jy/beam
! Combined flux in latest and established models = 0.141378 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 84 components and 0.141378 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039826Jy  sigma=0.713726
! Fit after  self-cal, rms=0.039811Jy  sigma=0.713488
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000136651 Jy
! Component: 100  -  total flux cleaned = 0.000206272 Jy
! Component: 150  -  total flux cleaned = 0.000285467 Jy
! Component: 200  -  total flux cleaned = 0.000337419 Jy
! Total flux subtracted in 200 components = 0.000337419 Jy
! Clean residual min=-0.003985 max=0.003554 Jy/beam
! Clean residual mean=0.000004 rms=0.000802 Jy/beam
! Combined flux in latest and established models = 0.141715 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 94 components and 0.141715 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039781Jy  sigma=0.713052
! Fit after  self-cal, rms=0.039777Jy  sigma=0.712990
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039777Jy  sigma=0.712990
! Fit after  self-cal, rms=0.039781Jy  sigma=0.712769
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.87 mas, bmaj=2.496 mas, bpa=-2.437 degrees
! Estimated noise=0.37352 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000521615 Jy
! Component: 100  -  total flux cleaned = 0.000777915 Jy
! Component: 150  -  total flux cleaned = 0.000972872 Jy
! Component: 200  -  total flux cleaned = 0.00109973 Jy
! Total flux subtracted in 200 components = 0.00109973 Jy
! Clean residual min=-0.003961 max=0.003561 Jy/beam
! Clean residual mean=0.000003 rms=0.000797 Jy/beam
! Combined flux in latest and established models = 0.142815 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 98 components and 0.142815 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039758Jy  sigma=0.712413
! Fit after  self-cal, rms=0.039754Jy  sigma=0.712364
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000127033 Jy
! Component: 100  -  total flux cleaned = 0.000193619 Jy
! Component: 150  -  total flux cleaned = 0.000217565 Jy
! Component: 200  -  total flux cleaned = 0.000251195 Jy
! Total flux subtracted in 200 components = 0.000251195 Jy
! Clean residual min=-0.003920 max=0.003587 Jy/beam
! Clean residual mean=0.000004 rms=0.000795 Jy/beam
! Combined flux in latest and established models = 0.143066 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 100 components and 0.143066 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039744Jy  sigma=0.712238
! Fit after  self-cal, rms=0.039742Jy  sigma=0.712223
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039742Jy  sigma=0.712223
! Fit after  self-cal, rms=0.039791Jy  sigma=0.712105
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.985 mas, bmaj=2.865 mas, bpa=-2.609 degrees
! Estimated noise=0.475343 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000713397 Jy
! Component: 100  -  total flux cleaned = 0.000851443 Jy
! Component: 150  -  total flux cleaned = 0.000968497 Jy
! Component: 200  -  total flux cleaned = 0.00100805 Jy
! Total flux subtracted in 200 components = 0.00100805 Jy
! Clean residual min=-0.004401 max=0.006468 Jy/beam
! Clean residual mean=0.000007 rms=0.001314 Jy/beam
! Combined flux in latest and established models = 0.144074 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 117 components and 0.144074 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039794Jy  sigma=0.712102
! Fit after  self-cal, rms=0.039788Jy  sigma=0.712042
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (42, -4.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.005603 Jy
! Component: 100  -  total flux cleaned = 0.008209 Jy
! Component: 150  -  total flux cleaned = 0.0100285 Jy
! Component: 200  -  total flux cleaned = 0.0113798 Jy
! Total flux subtracted in 200 components = 0.0113798 Jy
! Clean residual min=-0.003698 max=0.002821 Jy/beam
! Clean residual mean=0.000005 rms=0.000900 Jy/beam
! Combined flux in latest and established models = 0.155454 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 156 components and 0.155454 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039419Jy  sigma=0.702353
! Fit after  self-cal, rms=0.039394Jy  sigma=0.701962
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8694 mas, bmaj=2.492 mas, bpa=-2.423 degrees
! Estimated noise=0.37403 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8694 x 2.492 at -2.423 degrees (North through East)
! Clean map  min=-0.0034751  max=0.084416 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7486 mas, bmaj=2.32 mas, bpa=-3.401 degrees
! Estimated noise=0.741917 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0620795 Jy
! Component: 100  -  total flux cleaned = 0.0873743 Jy
! Component: 150  -  total flux cleaned = 0.101417 Jy
! Component: 200  -  total flux cleaned = 0.110362 Jy
! Total flux subtracted in 200 components = 0.110362 Jy
! Clean residual min=-0.005147 max=0.004906 Jy/beam
! Clean residual mean=-0.000000 rms=0.001227 Jy/beam
! Combined flux in latest and established models = 0.110362 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.110362 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8694 mas, bmaj=2.492 mas, bpa=-2.423 degrees
! Estimated noise=0.37403 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00996276 Jy
! Component: 100  -  total flux cleaned = 0.0164736 Jy
! Component: 150  -  total flux cleaned = 0.021168 Jy
! Component: 200  -  total flux cleaned = 0.0248991 Jy
! Total flux subtracted in 200 components = 0.0248991 Jy
! Clean residual min=-0.004343 max=0.003397 Jy/beam
! Clean residual mean=0.000003 rms=0.000909 Jy/beam
! Combined flux in latest and established models = 0.135261 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 58 components and 0.135261 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.985 mas, bmaj=2.865 mas, bpa=-2.609 degrees
! Estimated noise=0.475343 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00565318 Jy
! Component: 100  -  total flux cleaned = 0.00958283 Jy
! Component: 150  -  total flux cleaned = 0.0126546 Jy
! Component: 200  -  total flux cleaned = 0.0151577 Jy
! Total flux subtracted in 200 components = 0.0151577 Jy
! Clean residual min=-0.003933 max=0.003200 Jy/beam
! Clean residual mean=0.000005 rms=0.000983 Jy/beam
! Combined flux in latest and established models = 0.150418 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00206609 Jy
! Component: 100  -  total flux cleaned = 0.00379971 Jy
! Component: 150  -  total flux cleaned = 0.00520476 Jy
! Component: 200  -  total flux cleaned = 0.00624978 Jy
! Total flux subtracted in 200 components = 0.00624978 Jy
! Clean residual min=-0.003418 max=0.002784 Jy/beam
! Clean residual mean=0.000004 rms=0.000869 Jy/beam
! Combined flux in latest and established models = 0.156668 Jy
! Adding 75 model components to the UV plane model.
! The established model now contains 126 components and 0.156668 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8694 mas, bmaj=2.492 mas, bpa=-2.423 degrees
! Estimated noise=0.37403 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000437889 Jy
! Component: 100  -  total flux cleaned = 0.00104763 Jy
! Component: 150  -  total flux cleaned = 0.00135733 Jy
! Component: 200  -  total flux cleaned = 0.00163302 Jy
! Total flux subtracted in 200 components = 0.00163302 Jy
! Clean residual min=-0.003534 max=0.002562 Jy/beam
! Clean residual mean=0.000001 rms=0.000642 Jy/beam
! Combined flux in latest and established models = 0.158301 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 144 components and 0.158301 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039378Jy  sigma=0.701404
! Fit after  self-cal, rms=0.039361Jy  sigma=0.701212
wmodel /scr/pima/bp192a0_uvs/J2332+4030_X_map.mod
! Writing 144 model components to file: /scr/pima/bp192a0_uvs/J2332+4030_X_map.mod
wobs /scr/pima/bp192a0_uvs/J2332+4030_X_uvs.fits
! Writing UV FITS file: /scr/pima/bp192a0_uvs/J2332+4030_X_uvs.fits
wwins /scr/pima/bp192a0_uvs/J2332+4030_X_map.win
! wwins: Wrote 3 windows to /scr/pima/bp192a0_uvs/J2332+4030_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00134561 Jy
! Component: 100  -  total flux cleaned = -0.00192221 Jy
! Component: 150  -  total flux cleaned = -0.0023217 Jy
! Component: 200  -  total flux cleaned = -0.00261009 Jy
! Component: 250  -  total flux cleaned = -0.00284348 Jy
! Component: 300  -  total flux cleaned = -0.00299307 Jy
! Component: 350  -  total flux cleaned = -0.00302885 Jy
! Component: 400  -  total flux cleaned = -0.00306231 Jy
! Component: 450  -  total flux cleaned = -0.00303063 Jy
! Component: 500  -  total flux cleaned = -0.00306239 Jy
! Component: 550  -  total flux cleaned = -0.00297109 Jy
! Component: 600  -  total flux cleaned = -0.0029124 Jy
! Component: 650  -  total flux cleaned = -0.00285615 Jy
! Component: 700  -  total flux cleaned = -0.00288382 Jy
! Component: 750  -  total flux cleaned = -0.00282995 Jy
! Component: 800  -  total flux cleaned = -0.00283051 Jy
! Component: 850  -  total flux cleaned = -0.00285643 Jy
! Component: 900  -  total flux cleaned = -0.0028813 Jy
! Component: 950  -  total flux cleaned = -0.00290584 Jy
! Component: 1000  -  total flux cleaned = -0.00292967 Jy
! Component: 1050  -  total flux cleaned = -0.00297583 Jy
! Component: 1100  -  total flux cleaned = -0.00304459 Jy
! Component: 1150  -  total flux cleaned = -0.00311142 Jy
! Component: 1200  -  total flux cleaned = -0.00315531 Jy
! Component: 1250  -  total flux cleaned = -0.00326199 Jy
! Component: 1300  -  total flux cleaned = -0.00334551 Jy
! Component: 1350  -  total flux cleaned = -0.00336622 Jy
! Component: 1400  -  total flux cleaned = -0.0034266 Jy
! Component: 1450  -  total flux cleaned = -0.00354436 Jy
! Component: 1500  -  total flux cleaned = -0.00356344 Jy
! Component: 1550  -  total flux cleaned = -0.0035635 Jy
! Component: 1600  -  total flux cleaned = -0.00360058 Jy
! Component: 1650  -  total flux cleaned = -0.00358219 Jy
! Component: 1700  -  total flux cleaned = -0.0036001 Jy
! Component: 1750  -  total flux cleaned = -0.0036177 Jy
! Component: 1800  -  total flux cleaned = -0.00363492 Jy
! Component: 1850  -  total flux cleaned = -0.00363466 Jy
! Component: 1900  -  total flux cleaned = -0.00366813 Jy
! Component: 1950  -  total flux cleaned = -0.00370119 Jy
! Component: 2000  -  total flux cleaned = -0.00371759 Jy
! Component: 2050  -  total flux cleaned = -0.00376556 Jy
! Component: 2100  -  total flux cleaned = -0.00382862 Jy
! Component: 2150  -  total flux cleaned = -0.00385971 Jy
! Component: 2200  -  total flux cleaned = -0.00390588 Jy
! Component: 2250  -  total flux cleaned = -0.00398174 Jy
! Component: 2300  -  total flux cleaned = -0.00399654 Jy
! Component: 2350  -  total flux cleaned = -0.00402583 Jy
! Component: 2400  -  total flux cleaned = -0.0040403 Jy
! Component: 2450  -  total flux cleaned = -0.0040548 Jy
! Component: 2500  -  total flux cleaned = -0.00406915 Jy
! Component: 2550  -  total flux cleaned = -0.00408319 Jy
! Component: 2600  -  total flux cleaned = -0.00411078 Jy
! Component: 2650  -  total flux cleaned = -0.00415128 Jy
! Component: 2700  -  total flux cleaned = -0.00415108 Jy
! Component: 2750  -  total flux cleaned = -0.0041243 Jy
! Component: 2800  -  total flux cleaned = -0.00411124 Jy
! Component: 2850  -  total flux cleaned = -0.00412426 Jy
! Component: 2900  -  total flux cleaned = -0.0041626 Jy
! Component: 2950  -  total flux cleaned = -0.0041118 Jy
! Component: 3000  -  total flux cleaned = -0.0040994 Jy
! Component: 3050  -  total flux cleaned = -0.00408723 Jy
! Component: 3100  -  total flux cleaned = -0.00412422 Jy
! Component: 3150  -  total flux cleaned = -0.00409995 Jy
! Component: 3200  -  total flux cleaned = -0.00411187 Jy
! Component: 3250  -  total flux cleaned = -0.00409995 Jy
! Component: 3300  -  total flux cleaned = -0.00409992 Jy
! Component: 3350  -  total flux cleaned = -0.00411156 Jy
! Component: 3400  -  total flux cleaned = -0.00412321 Jy
! Component: 3450  -  total flux cleaned = -0.00414628 Jy
! Component: 3500  -  total flux cleaned = -0.00418043 Jy
! Component: 3550  -  total flux cleaned = -0.00418044 Jy
! Component: 3600  -  total flux cleaned = -0.00420264 Jy
! Component: 3650  -  total flux cleaned = -0.00421373 Jy
! Component: 3700  -  total flux cleaned = -0.0041809 Jy
! Component: 3750  -  total flux cleaned = -0.0041811 Jy
! Component: 3800  -  total flux cleaned = -0.00418103 Jy
! Component: 3850  -  total flux cleaned = -0.00419184 Jy
! Component: 3900  -  total flux cleaned = -0.0042449 Jy
! Component: 3950  -  total flux cleaned = -0.00423452 Jy
! Component: 4000  -  total flux cleaned = -0.00427628 Jy
! Component: 4050  -  total flux cleaned = -0.00428646 Jy
! Total flux subtracted in 4096 components = -0.00428639 Jy
! Clean residual min=-0.000638 max=0.000692 Jy/beam
! Clean residual mean=0.000001 rms=0.000180 Jy/beam
! Combined flux in latest and established models = 0.154015 Jy
keep
! Adding 308 model components to the UV plane model.
! The established model now contains 452 components and 0.154015 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bp192a0_uvs/J2332+4030_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8694 x 2.492 at -2.423 degrees (North through East)
! Clean map  min=-0.0013836  max=0.084059 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp192a0_uvs/J2332+4030_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0840587 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000174848 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.624023 0.624023 1.24805 2.49609 4.99218 9.98437 19.9687 39.9375 79.8749
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.084 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  480.751 
quit
! Quitting program
! Log file /scr/pima/bp192a0_uvs/J2332+4030_X_uvs.log closed on Fri Aug 21 06:53:32 2015