! Started logfile: /scr/pima/bp192a0_uvs/J2311+2547_C_uvs.log on Fri Aug 21 07:25:53 2015
obs /scr/pima/bp192a0_uvs/J2311+2547_C_uva.fits
! Reading UV FITS file: /scr/pima/bp192a0_uvs/J2311+2547_C_uva.fits
! AN table 1: 19 integrations on 10 of 10 possible baselines.
! Apparent sampling: 0.7 visibilities/baseline/integration-bin.
! Found source: J2311+2547
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 1064 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp192a0_uvs/J2311+2547_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.000696Jy  sigma=27.499790
! Fit after  self-cal, rms=0.974447Jy  sigma=27.066326
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=12.18 mas, bmaj=13.3 mas, bpa=14.46 degrees
! Estimated noise=0.914767 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0177569 Jy
! Component: 100  -  total flux cleaned = 0.0184234 Jy
! Total flux subtracted in 100 components = 0.0184234 Jy
! Clean residual min=-0.003856 max=0.003867 Jy/beam
! Clean residual mean=-0.000010 rms=0.002233 Jy/beam
! Combined flux in latest and established models = 0.0184234 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 44 components and 0.0184234 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027114Jy  sigma=0.720653
! Fit after  self-cal, rms=0.026052Jy  sigma=0.694682
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=12.48 mas, bmaj=14.36 mas, bpa=24.36 degrees
! Estimated noise=0.856295 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000697622 Jy
! Component: 100  -  total flux cleaned = 0.000388571 Jy
! Component: 150  -  total flux cleaned = 0.00138993 Jy
! Component: 200  -  total flux cleaned = 0.00224742 Jy
! Total flux subtracted in 200 components = 0.00224742 Jy
! Clean residual min=-0.001879 max=0.001879 Jy/beam
! Clean residual mean=-0.000003 rms=0.001137 Jy/beam
! Combined flux in latest and established models = 0.0206709 Jy
! Performing phase self-cal
! Adding 129 model components to the UV plane model.
! The established model now contains 171 components and 0.0206709 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023012Jy  sigma=0.598515
! Fit after  self-cal, rms=0.022780Jy  sigma=0.590220
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 12.48 x 14.36 at 24.36 degrees (North through East)
! Clean map  min=-0.0075362  max=0.02015 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.15     KP        1.05     LA        0.88     OV        1.00*    
!   PT        0.95     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.08     KP        1.02     LA        0.86     OV        1.00*    
!   PT        0.92     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.12     KP        0.96     LA        1.07     OV        1.00*    
!   PT        0.96     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.92     KP        0.95     LA        0.93     OV        1.00*    
!   PT        0.97     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.05     KP        1.08     LA        0.93     OV        1.00*    
!   PT        1.00     
! 
! 
! Fit before self-cal, rms=0.022780Jy  sigma=0.590220
! Fit after  self-cal, rms=0.022596Jy  sigma=0.585125
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=12.67 mas, bmaj=14.3 mas, bpa=25.45 degrees
! Estimated noise=0.842114 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000211869 Jy
! Component: 100  -  total flux cleaned = 0.0011909 Jy
! Component: 150  -  total flux cleaned = 0.00214583 Jy
! Component: 200  -  total flux cleaned = 0.00285666 Jy
! Total flux subtracted in 200 components = 0.00285666 Jy
! Clean residual min=-0.000393 max=0.000409 Jy/beam
! Clean residual mean=0.000001 rms=0.000215 Jy/beam
! Combined flux in latest and established models = 0.0235275 Jy
! Performing phase self-cal
! Adding 95 model components to the UV plane model.
! The established model now contains 266 components and 0.0235275 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022334Jy  sigma=0.577879
! Fit after  self-cal, rms=0.022299Jy  sigma=0.576376
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022299Jy  sigma=0.576376
! Fit after  self-cal, rms=0.022161Jy  sigma=0.574587
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.58 mas, bmaj=14.17 mas, bpa=22.79 degrees
! Estimated noise=0.842632 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000426098 Jy
! Component: 100  -  total flux cleaned = -0.000513152 Jy
! Component: 150  -  total flux cleaned = -0.000497178 Jy
! Component: 200  -  total flux cleaned = -0.000598956 Jy
! Total flux subtracted in 200 components = -0.000598956 Jy
! Clean residual min=-0.000319 max=0.000316 Jy/beam
! Clean residual mean=0.000002 rms=0.000178 Jy/beam
! Combined flux in latest and established models = 0.0229286 Jy
selfcal
! Performing phase self-cal
! Adding 116 model components to the UV plane model.
! The established model now contains 380 components and 0.0229286 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022044Jy  sigma=0.571361
! Fit after  self-cal, rms=0.022023Jy  sigma=0.571076
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000127578 Jy
! Component: 100  -  total flux cleaned = -0.000133123 Jy
! Component: 150  -  total flux cleaned = -0.000144851 Jy
! Component: 200  -  total flux cleaned = -4.98102e-05 Jy
! Total flux subtracted in 200 components = -4.98102e-05 Jy
! Clean residual min=-0.000167 max=0.000169 Jy/beam
! Clean residual mean=0.000002 rms=0.000085 Jy/beam
! Combined flux in latest and established models = 0.0228787 Jy
! Performing phase self-cal
! Adding 88 model components to the UV plane model.
! The established model now contains 461 components and 0.0228788 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021999Jy  sigma=0.570588
! Fit after  self-cal, rms=0.021995Jy  sigma=0.570524
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021995Jy  sigma=0.570524
! Fit after  self-cal, rms=0.021565Jy  sigma=0.566429
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.56 mas, bmaj=14.05 mas, bpa=20.7 degrees
! Estimated noise=0.83462 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000218581 Jy
! Component: 100  -  total flux cleaned = -0.000400417 Jy
! Component: 150  -  total flux cleaned = -0.000387521 Jy
! Component: 200  -  total flux cleaned = -0.000399008 Jy
! Total flux subtracted in 200 components = -0.000399008 Jy
! Clean residual min=-0.000194 max=0.000199 Jy/beam
! Clean residual mean=0.000002 rms=0.000090 Jy/beam
! Combined flux in latest and established models = 0.0224797 Jy
selfcal
! Performing phase self-cal
! Adding 86 model components to the UV plane model.
! The established model now contains 546 components and 0.0224797 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021544Jy  sigma=0.565804
! Fit after  self-cal, rms=0.021557Jy  sigma=0.565655
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.34084e-05 Jy
! Component: 100  -  total flux cleaned = 0.000112441 Jy
! Component: 150  -  total flux cleaned = 0.000127053 Jy
! Component: 200  -  total flux cleaned = 0.000134143 Jy
! Total flux subtracted in 200 components = 0.000134143 Jy
! Clean residual min=-0.000116 max=0.000120 Jy/beam
! Clean residual mean=0.000001 rms=0.000050 Jy/beam
! Combined flux in latest and established models = 0.0226139 Jy
! Performing phase self-cal
! Adding 72 model components to the UV plane model.
! The established model now contains 615 components and 0.0226139 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021551Jy  sigma=0.565508
! Fit after  self-cal, rms=0.021553Jy  sigma=0.565487
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021553Jy  sigma=0.565487
! Fit after  self-cal, rms=0.021566Jy  sigma=0.565139
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.65 mas, bmaj=13.98 mas, bpa=19.01 degrees
! Estimated noise=0.830385 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.1031e-05 Jy
! Component: 100  -  total flux cleaned = -0.000227561 Jy
! Component: 150  -  total flux cleaned = -0.000295702 Jy
! Component: 200  -  total flux cleaned = -0.000323013 Jy
! Total flux subtracted in 200 components = -0.000323013 Jy
! Clean residual min=-0.000150 max=0.000150 Jy/beam
! Clean residual mean=0.000001 rms=0.000073 Jy/beam
! Combined flux in latest and established models = 0.0222909 Jy
selfcal
! Performing phase self-cal
! Adding 77 model components to the UV plane model.
! The established model now contains 684 components and 0.0222909 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021553Jy  sigma=0.564768
! Fit after  self-cal, rms=0.021560Jy  sigma=0.564742
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.93863e-05 Jy
! Component: 100  -  total flux cleaned = 7.41752e-05 Jy
! Component: 150  -  total flux cleaned = 6.08794e-05 Jy
! Component: 200  -  total flux cleaned = 2.08153e-05 Jy
! Total flux subtracted in 200 components = 2.08153e-05 Jy
! Clean residual min=-0.000110 max=0.000110 Jy/beam
! Clean residual mean=0.000001 rms=0.000045 Jy/beam
! Combined flux in latest and established models = 0.0223117 Jy
! Performing phase self-cal
! Adding 74 model components to the UV plane model.
! The established model now contains 752 components and 0.0223117 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021556Jy  sigma=0.564646
! Fit after  self-cal, rms=0.021557Jy  sigma=0.564630
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=12.56 mas, bmaj=13.94 mas, bpa=18.57 degrees
! Estimated noise=0.829509 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 12.56 x 13.94 at 18.57 degrees (North through East)
! Clean map  min=-0.0055406  max=0.018828 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.13 mas, bmaj=13.09 mas, bpa=1.717 degrees
! Estimated noise=0.869477 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0134132 Jy
! Component: 100  -  total flux cleaned = 0.0138322 Jy
! Component: 150  -  total flux cleaned = 0.0108062 Jy
! Component: 200  -  total flux cleaned = 0.0103787 Jy
! Total flux subtracted in 200 components = 0.0103787 Jy
! Clean residual min=-0.002856 max=0.002860 Jy/beam
! Clean residual mean=-0.000001 rms=0.001447 Jy/beam
! Combined flux in latest and established models = 0.0103787 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 103 model components to the UV plane model.
! The established model now contains 103 components and 0.0103787 Jy
! Inverting map and beam 
! Estimated beam: bmin=12.56 mas, bmaj=13.94 mas, bpa=18.57 degrees
! Estimated noise=0.829509 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00153942 Jy
! Component: 100  -  total flux cleaned = -0.00402913 Jy
! Component: 150  -  total flux cleaned = -0.00589873 Jy
! Component: 200  -  total flux cleaned = -0.00652809 Jy
! Total flux subtracted in 200 components = -0.00652809 Jy
! Clean residual min=-0.001350 max=0.001353 Jy/beam
! Clean residual mean=-0.000002 rms=0.000788 Jy/beam
! Combined flux in latest and established models = 0.00385058 Jy
! Adding 128 model components to the UV plane model.
! The established model now contains 231 components and 0.00385059 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.65 mas, bmaj=13.98 mas, bpa=19.01 degrees
! Estimated noise=0.830385 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000111323 Jy
! Component: 100  -  total flux cleaned = -0.000594921 Jy
! Component: 150  -  total flux cleaned = -0.00104955 Jy
! Component: 200  -  total flux cleaned = -0.00090256 Jy
! Total flux subtracted in 200 components = -0.00090256 Jy
! Clean residual min=-0.000461 max=0.000462 Jy/beam
! Clean residual mean=-0.000000 rms=0.000273 Jy/beam
! Combined flux in latest and established models = 0.00294803 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000158723 Jy
! Component: 100  -  total flux cleaned = 0.000203287 Jy
! Component: 150  -  total flux cleaned = 0.000161987 Jy
! Component: 200  -  total flux cleaned = 0.00033346 Jy
! Total flux subtracted in 200 components = 0.00033346 Jy
! Clean residual min=-0.000315 max=0.000315 Jy/beam
! Clean residual mean=-0.000000 rms=0.000124 Jy/beam
! Combined flux in latest and established models = 0.00328149 Jy
! Adding 192 model components to the UV plane model.
! The established model now contains 419 components and 0.00328149 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=12.56 mas, bmaj=13.94 mas, bpa=18.57 degrees
! Estimated noise=0.829509 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000339323 Jy
! Component: 100  -  total flux cleaned = -0.000385064 Jy
! Component: 150  -  total flux cleaned = -0.000353268 Jy
! Component: 200  -  total flux cleaned = -0.000300511 Jy
! Total flux subtracted in 200 components = -0.000300511 Jy
! Clean residual min=-0.000322 max=0.000314 Jy/beam
! Clean residual mean=0.000001 rms=0.000091 Jy/beam
! Combined flux in latest and established models = 0.00298098 Jy
selfcal
! Performing phase self-cal
! Adding 71 model components to the UV plane model.
! The established model now contains 490 components and 0.00298098 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021577Jy  sigma=0.565315
! Fit after  self-cal, rms=0.021555Jy  sigma=0.564764
wmodel /scr/pima/bp192a0_uvs/J2311+2547_C_map.mod
! Writing 490 model components to file: /scr/pima/bp192a0_uvs/J2311+2547_C_map.mod
wobs /scr/pima/bp192a0_uvs/J2311+2547_C_uvs.fits
! Writing UV FITS file: /scr/pima/bp192a0_uvs/J2311+2547_C_uvs.fits
wwins /scr/pima/bp192a0_uvs/J2311+2547_C_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/scr/pima/bp192a0_uvs/J2311+2547_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 12.56 x 13.94 at 18.57 degrees (North through East)
! Clean map  min=-0.0053737  max=0.019189 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp192a0_uvs/J2311+2547_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.019189 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000103185 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.61319 1.61319 3.22638 6.45276 12.9055 25.811 51.622
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.019 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  185.967 
quit
! Quitting program
! Log file /scr/pima/bp192a0_uvs/J2311+2547_C_uvs.log closed on Fri Aug 21 07:25:56 2015