! Started logfile: /scr/pima/bp192a0_uvs/J0340-2119_X_uvs.log on Fri Aug 21 06:52:40 2015
obs /scr/pima/bp192a0_uvs/J0340-2119_X_uva.fits
! Reading UV FITS file: /scr/pima/bp192a0_uvs/J0340-2119_X_uva.fits
! AN table 1: 24 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.810185 visibilities/baseline/integration-bin.
! Found source: J0340-2119
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 7000 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp192a0_uvs/J0340-2119_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.068809Jy  sigma=18.242016
! Fit after  self-cal, rms=0.621985Jy  sigma=10.304084
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7647 mas, bmaj=2.026 mas, bpa=-11.62 degrees
! Estimated noise=0.908337 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.279958 Jy
! Component: 100  -  total flux cleaned = 0.362603 Jy
! Total flux subtracted in 100 components = 0.362603 Jy
! Clean residual min=-0.025141 max=0.065714 Jy/beam
! Clean residual mean=-0.000209 rms=0.009522 Jy/beam
! Combined flux in latest and established models = 0.362603 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.362603 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.149676Jy  sigma=2.604873
! Fit after  self-cal, rms=0.149567Jy  sigma=2.603426
! Inverting map 
! Added new window around map position (-1.8, -1.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0640165 Jy
! Component: 100  -  total flux cleaned = 0.104344 Jy
! Total flux subtracted in 100 components = 0.104344 Jy
! Clean residual min=-0.023038 max=0.029631 Jy/beam
! Clean residual mean=-0.000150 rms=0.006037 Jy/beam
! Combined flux in latest and established models = 0.466947 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 29 components and 0.466947 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.102313Jy  sigma=1.732790
! Fit after  self-cal, rms=0.099206Jy  sigma=1.686923
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9499 mas, bmaj=2.396 mas, bpa=-10.11 degrees
! Estimated noise=0.50989 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0470301 Jy
! Component: 100  -  total flux cleaned = 0.0737591 Jy
! Component: 150  -  total flux cleaned = 0.0901306 Jy
! Component: 200  -  total flux cleaned = 0.10052 Jy
! Total flux subtracted in 200 components = 0.10052 Jy
! Clean residual min=-0.017827 max=0.021182 Jy/beam
! Clean residual mean=-0.000093 rms=0.004838 Jy/beam
! Combined flux in latest and established models = 0.567467 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 52 components and 0.567467 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.074276Jy  sigma=1.236571
! Fit after  self-cal, rms=0.072819Jy  sigma=1.213185
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9499 x 2.396 at -10.11 degrees (North through East)
! Clean map  min=-0.01547  max=0.36446 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.97     HN        0.95     KP        1.00     
!   LA        0.94     MK        0.98     NL        1.03     OV        1.01     
!   PT        0.84     SC        0.97     
! 
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.07     HN        1.05     KP        0.99     
!   LA        0.96     MK        1.03     NL        0.98     OV        1.07     
!   PT        0.88     SC        1.00     
! 
! 
! Correcting IF 5.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.02     KP        1.10     
!   LA        0.98     MK        0.95     NL        1.11     OV        1.06     
!   PT        0.85     SC        0.96     
! 
! 
! Correcting IF 6.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.05     HN        1.12     KP        1.11     
!   LA        1.05     MK        0.99     NL        1.18     OV        1.12     
!   PT        0.88     SC        0.99     
! 
! 
! Correcting IF 7.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.01     HN        1.03     KP        1.08     
!   LA        0.95     MK        0.96     NL        0.90     OV        1.14     
!   PT        0.86     SC        0.97     
! 
! 
! Correcting IF 8.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.072819Jy  sigma=1.213185
! Fit after  self-cal, rms=0.064581Jy  sigma=1.046744
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9612 mas, bmaj=2.392 mas, bpa=-9.863 degrees
! Estimated noise=0.509999 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-5.8, -3).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0165851 Jy
! Component: 100  -  total flux cleaned = 0.0253703 Jy
! Component: 150  -  total flux cleaned = 0.0311996 Jy
! Component: 200  -  total flux cleaned = 0.0355588 Jy
! Total flux subtracted in 200 components = 0.0355588 Jy
! Clean residual min=-0.007736 max=0.009103 Jy/beam
! Clean residual mean=-0.000009 rms=0.002116 Jy/beam
! Combined flux in latest and established models = 0.603026 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 88 components and 0.603026 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.060331Jy  sigma=0.961453
! Fit after  self-cal, rms=0.060054Jy  sigma=0.956697
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.060054Jy  sigma=0.956697
! Fit after  self-cal, rms=0.051925Jy  sigma=0.806646
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9594 mas, bmaj=2.387 mas, bpa=-9.726 degrees
! Estimated noise=0.508564 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00452379 Jy
! Component: 100  -  total flux cleaned = 0.00754201 Jy
! Component: 150  -  total flux cleaned = 0.00820655 Jy
! Component: 200  -  total flux cleaned = 0.00887815 Jy
! Total flux subtracted in 200 components = 0.00887815 Jy
! Clean residual min=-0.005446 max=0.006036 Jy/beam
! Clean residual mean=-0.000009 rms=0.001543 Jy/beam
! Combined flux in latest and established models = 0.611904 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 107 components and 0.611904 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.051430Jy  sigma=0.796749
! Fit after  self-cal, rms=0.051367Jy  sigma=0.796083
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00103852 Jy
! Component: 100  -  total flux cleaned = 0.00158361 Jy
! Component: 150  -  total flux cleaned = 0.00207713 Jy
! Component: 200  -  total flux cleaned = 0.00246642 Jy
! Total flux subtracted in 200 components = 0.00246642 Jy
! Clean residual min=-0.005196 max=0.006066 Jy/beam
! Clean residual mean=-0.000007 rms=0.001489 Jy/beam
! Combined flux in latest and established models = 0.614371 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 115 components and 0.61437 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.051177Jy  sigma=0.792528
! Fit after  self-cal, rms=0.051137Jy  sigma=0.792287
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.051137Jy  sigma=0.792287
! Fit after  self-cal, rms=0.051115Jy  sigma=0.791028
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9585 mas, bmaj=2.385 mas, bpa=-9.672 degrees
! Estimated noise=0.509684 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00249728 Jy
! Component: 100  -  total flux cleaned = 0.0035703 Jy
! Component: 150  -  total flux cleaned = 0.00400673 Jy
! Component: 200  -  total flux cleaned = 0.00429629 Jy
! Total flux subtracted in 200 components = 0.00429629 Jy
! Clean residual min=-0.005211 max=0.006067 Jy/beam
! Clean residual mean=-0.000009 rms=0.001470 Jy/beam
! Combined flux in latest and established models = 0.618667 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 124 components and 0.618667 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.050949Jy  sigma=0.787488
! Fit after  self-cal, rms=0.050915Jy  sigma=0.787263
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000543705 Jy
! Component: 100  -  total flux cleaned = 0.000658454 Jy
! Component: 150  -  total flux cleaned = 0.000765309 Jy
! Component: 200  -  total flux cleaned = 0.000865962 Jy
! Total flux subtracted in 200 components = 0.000865962 Jy
! Clean residual min=-0.004984 max=0.006037 Jy/beam
! Clean residual mean=-0.000008 rms=0.001442 Jy/beam
! Combined flux in latest and established models = 0.619533 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 126 components and 0.619533 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.050816Jy  sigma=0.785292
! Fit after  self-cal, rms=0.050794Jy  sigma=0.785180
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.050794Jy  sigma=0.785180
! Fit after  self-cal, rms=0.050807Jy  sigma=0.784469
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.231 mas, bmaj=4.614 mas, bpa=-8.124 degrees
! Estimated noise=0.631395 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00417205 Jy
! Component: 100  -  total flux cleaned = 0.00570633 Jy
! Component: 150  -  total flux cleaned = 0.00594991 Jy
! Component: 200  -  total flux cleaned = 0.00600223 Jy
! Total flux subtracted in 200 components = 0.00600223 Jy
! Clean residual min=-0.006839 max=0.007863 Jy/beam
! Clean residual mean=-0.000011 rms=0.002248 Jy/beam
! Combined flux in latest and established models = 0.625535 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 135 components and 0.625535 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.050798Jy  sigma=0.782925
! Fit after  self-cal, rms=0.050742Jy  sigma=0.782074
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00105722 Jy
! Component: 100  -  total flux cleaned = 0.000813618 Jy
! Component: 150  -  total flux cleaned = 0.000593655 Jy
! Component: 200  -  total flux cleaned = 0.000394973 Jy
! Total flux subtracted in 200 components = 0.000394973 Jy
! Clean residual min=-0.006751 max=0.007725 Jy/beam
! Clean residual mean=-0.000009 rms=0.002178 Jy/beam
! Combined flux in latest and established models = 0.62593 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 141 components and 0.62593 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.050770Jy  sigma=0.781965
! Fit after  self-cal, rms=0.050732Jy  sigma=0.781582
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9576 mas, bmaj=2.382 mas, bpa=-9.598 degrees
! Estimated noise=0.510642 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9576 x 2.382 at -9.598 degrees (North through East)
! Clean map  min=-0.0049356  max=0.36313 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7674 mas, bmaj=2.015 mas, bpa=-10.88 degrees
! Estimated noise=0.91508 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.27948 Jy
! Component: 100  -  total flux cleaned = 0.371032 Jy
! Component: 150  -  total flux cleaned = 0.429275 Jy
! Component: 200  -  total flux cleaned = 0.469282 Jy
! Total flux subtracted in 200 components = 0.469282 Jy
! Clean residual min=-0.011620 max=0.023213 Jy/beam
! Clean residual mean=-0.000105 rms=0.004723 Jy/beam
! Combined flux in latest and established models = 0.469282 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.469282 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9576 mas, bmaj=2.382 mas, bpa=-9.598 degrees
! Estimated noise=0.510642 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0455981 Jy
! Component: 100  -  total flux cleaned = 0.0727524 Jy
! Component: 150  -  total flux cleaned = 0.0916841 Jy
! Component: 200  -  total flux cleaned = 0.105819 Jy
! Total flux subtracted in 200 components = 0.105819 Jy
! Clean residual min=-0.006925 max=0.013832 Jy/beam
! Clean residual mean=-0.000043 rms=0.002643 Jy/beam
! Combined flux in latest and established models = 0.575101 Jy
! Adding 58 model components to the UV plane model.
! The established model now contains 71 components and 0.575101 Jy
! Inverting map 
! Added new window around map position (-3.4, -1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.013384 Jy
! Component: 100  -  total flux cleaned = 0.0216192 Jy
! Component: 150  -  total flux cleaned = 0.0278178 Jy
! Component: 200  -  total flux cleaned = 0.0325969 Jy
! Total flux subtracted in 200 components = 0.0325969 Jy
! Clean residual min=-0.005232 max=0.005748 Jy/beam
! Clean residual mean=-0.000017 rms=0.001510 Jy/beam
! Combined flux in latest and established models = 0.607698 Jy
! Adding 49 model components to the UV plane model.
! The established model now contains 112 components and 0.607698 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.231 mas, bmaj=4.614 mas, bpa=-8.124 degrees
! Estimated noise=0.631395 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00621343 Jy
! Component: 100  -  total flux cleaned = 0.0103741 Jy
! Component: 150  -  total flux cleaned = 0.0133076 Jy
! Component: 200  -  total flux cleaned = 0.0154447 Jy
! Total flux subtracted in 200 components = 0.0154447 Jy
! Clean residual min=-0.006012 max=0.006965 Jy/beam
! Clean residual mean=-0.000011 rms=0.002118 Jy/beam
! Combined flux in latest and established models = 0.623143 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0015636 Jy
! Component: 100  -  total flux cleaned = 0.00216341 Jy
! Component: 150  -  total flux cleaned = 0.00243803 Jy
! Component: 200  -  total flux cleaned = 0.00269765 Jy
! Total flux subtracted in 200 components = 0.00269765 Jy
! Clean residual min=-0.006062 max=0.006805 Jy/beam
! Clean residual mean=-0.000007 rms=0.002071 Jy/beam
! Combined flux in latest and established models = 0.625841 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 143 components and 0.625841 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9576 mas, bmaj=2.382 mas, bpa=-9.598 degrees
! Estimated noise=0.510642 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000612639 Jy
! Component: 100  -  total flux cleaned = -0.000541299 Jy
! Component: 150  -  total flux cleaned = -0.000352068 Jy
! Component: 200  -  total flux cleaned = -0.00023707 Jy
! Total flux subtracted in 200 components = -0.00023707 Jy
! Clean residual min=-0.004682 max=0.005443 Jy/beam
! Clean residual mean=-0.000004 rms=0.001247 Jy/beam
! Combined flux in latest and established models = 0.625604 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 156 components and 0.625604 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.049994Jy  sigma=0.770008
! Fit after  self-cal, rms=0.049858Jy  sigma=0.768209
wmodel /scr/pima/bp192a0_uvs/J0340-2119_X_map.mod
! Writing 156 model components to file: /scr/pima/bp192a0_uvs/J0340-2119_X_map.mod
wobs /scr/pima/bp192a0_uvs/J0340-2119_X_uvs.fits
! Writing UV FITS file: /scr/pima/bp192a0_uvs/J0340-2119_X_uvs.fits
wwins /scr/pima/bp192a0_uvs/J0340-2119_X_map.win
! wwins: Wrote 4 windows to /scr/pima/bp192a0_uvs/J0340-2119_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00139481 Jy
! Component: 100  -  total flux cleaned = 0.00185362 Jy
! Component: 150  -  total flux cleaned = 0.0021369 Jy
! Component: 200  -  total flux cleaned = 0.00246707 Jy
! Component: 250  -  total flux cleaned = 0.0026546 Jy
! Component: 300  -  total flux cleaned = 0.00259399 Jy
! Component: 350  -  total flux cleaned = 0.00247794 Jy
! Component: 400  -  total flux cleaned = 0.00225564 Jy
! Component: 450  -  total flux cleaned = 0.00225712 Jy
! Component: 500  -  total flux cleaned = 0.00246554 Jy
! Component: 550  -  total flux cleaned = 0.00256467 Jy
! Component: 600  -  total flux cleaned = 0.00261295 Jy
! Component: 650  -  total flux cleaned = 0.00265941 Jy
! Component: 700  -  total flux cleaned = 0.00274965 Jy
! Component: 750  -  total flux cleaned = 0.00279383 Jy
! Component: 800  -  total flux cleaned = 0.00292103 Jy
! Component: 850  -  total flux cleaned = 0.0029207 Jy
! Component: 900  -  total flux cleaned = 0.00300034 Jy
! Component: 950  -  total flux cleaned = 0.00292191 Jy
! Component: 1000  -  total flux cleaned = 0.00288354 Jy
! Component: 1050  -  total flux cleaned = 0.00277057 Jy
! Component: 1100  -  total flux cleaned = 0.00269767 Jy
! Component: 1150  -  total flux cleaned = 0.00273327 Jy
! Component: 1200  -  total flux cleaned = 0.00266343 Jy
! Component: 1250  -  total flux cleaned = 0.00266382 Jy
! Component: 1300  -  total flux cleaned = 0.00269633 Jy
! Component: 1350  -  total flux cleaned = 0.00269623 Jy
! Component: 1400  -  total flux cleaned = 0.00269603 Jy
! Component: 1450  -  total flux cleaned = 0.0027272 Jy
! Component: 1500  -  total flux cleaned = 0.00269641 Jy
! Component: 1550  -  total flux cleaned = 0.00272713 Jy
! Component: 1600  -  total flux cleaned = 0.0026974 Jy
! Component: 1650  -  total flux cleaned = 0.00263926 Jy
! Component: 1700  -  total flux cleaned = 0.00266843 Jy
! Component: 1750  -  total flux cleaned = 0.00269682 Jy
! Component: 1800  -  total flux cleaned = 0.00272514 Jy
! Component: 1850  -  total flux cleaned = 0.00261658 Jy
! Component: 1900  -  total flux cleaned = 0.00264363 Jy
! Component: 1950  -  total flux cleaned = 0.00267004 Jy
! Component: 2000  -  total flux cleaned = 0.00272164 Jy
! Component: 2050  -  total flux cleaned = 0.00267017 Jy
! Component: 2100  -  total flux cleaned = 0.00264461 Jy
! Component: 2150  -  total flux cleaned = 0.00259491 Jy
! Component: 2200  -  total flux cleaned = 0.00264433 Jy
! Component: 2250  -  total flux cleaned = 0.00257167 Jy
! Component: 2300  -  total flux cleaned = 0.00259539 Jy
! Component: 2350  -  total flux cleaned = 0.00252427 Jy
! Component: 2400  -  total flux cleaned = 0.00257096 Jy
! Component: 2450  -  total flux cleaned = 0.00252417 Jy
! Component: 2500  -  total flux cleaned = 0.00250113 Jy
! Component: 2550  -  total flux cleaned = 0.0024781 Jy
! Component: 2600  -  total flux cleaned = 0.00243304 Jy
! Component: 2650  -  total flux cleaned = 0.00245509 Jy
! Component: 2700  -  total flux cleaned = 0.00243304 Jy
! Component: 2750  -  total flux cleaned = 0.00241133 Jy
! Component: 2800  -  total flux cleaned = 0.00247569 Jy
! Component: 2850  -  total flux cleaned = 0.00243302 Jy
! Component: 2900  -  total flux cleaned = 0.00245426 Jy
! Component: 2950  -  total flux cleaned = 0.00247518 Jy
! Component: 3000  -  total flux cleaned = 0.00247512 Jy
! Component: 3050  -  total flux cleaned = 0.00241367 Jy
! Component: 3100  -  total flux cleaned = 0.00249519 Jy
! Component: 3150  -  total flux cleaned = 0.00251543 Jy
! Component: 3200  -  total flux cleaned = 0.00253545 Jy
! Component: 3250  -  total flux cleaned = 0.00257536 Jy
! Component: 3300  -  total flux cleaned = 0.00265413 Jy
! Component: 3350  -  total flux cleaned = 0.00265407 Jy
! Component: 3400  -  total flux cleaned = 0.00269264 Jy
! Component: 3450  -  total flux cleaned = 0.00265438 Jy
! Component: 3500  -  total flux cleaned = 0.00271172 Jy
! Component: 3550  -  total flux cleaned = 0.00273075 Jy
! Component: 3600  -  total flux cleaned = 0.0027683 Jy
! Component: 3650  -  total flux cleaned = 0.00276837 Jy
! Component: 3700  -  total flux cleaned = 0.00282422 Jy
! Component: 3750  -  total flux cleaned = 0.00284284 Jy
! Component: 3800  -  total flux cleaned = 0.00287944 Jy
! Component: 3850  -  total flux cleaned = 0.0028794 Jy
! Component: 3900  -  total flux cleaned = 0.00289752 Jy
! Component: 3950  -  total flux cleaned = 0.00287941 Jy
! Component: 4000  -  total flux cleaned = 0.00293344 Jy
! Component: 4050  -  total flux cleaned = 0.00298717 Jy
! Total flux subtracted in 4096 components = 0.00300504 Jy
! Clean residual min=-0.000962 max=0.001083 Jy/beam
! Clean residual mean=-0.000000 rms=0.000305 Jy/beam
! Combined flux in latest and established models = 0.628609 Jy
keep
! Adding 314 model components to the UV plane model.
! The established model now contains 470 components and 0.628609 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bp192a0_uvs/J0340-2119_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9576 x 2.382 at -9.598 degrees (North through East)
! Clean map  min=-0.0018868  max=0.36497 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp192a0_uvs/J0340-2119_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.364973 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00028784 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.236598 0.236598 0.473196 0.946393 1.89279 3.78557 7.57114 15.1423 30.2846 60.5691
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.364 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1267.97 
quit
! Quitting program
! Log file /scr/pima/bp192a0_uvs/J0340-2119_X_uvs.log closed on Fri Aug 21 06:52:44 2015