! Started logfile: /scr/pima/bp192a0_uvs/J0236-3745_C_uvs.log on Fri Aug 21 07:25:02 2015
obs /scr/pima/bp192a0_uvs/J0236-3745_C_uva.fits
! Reading UV FITS file: /scr/pima/bp192a0_uvs/J0236-3745_C_uva.fits
! AN table 1: 19 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.733333 visibilities/baseline/integration-bin.
! Found source: J0236-3745
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 1672 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp192a0_uvs/J0236-3745_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=1.008680Jy  sigma=15.402998
! Fit after  self-cal, rms=0.915483Jy  sigma=13.847424
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.437 mas, bmaj=45.12 mas, bpa=-10.08 degrees
! Estimated noise=1.60151 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0658421 Jy
! Component: 100  -  total flux cleaned = 0.101322 Jy
! Total flux subtracted in 100 components = 0.101322 Jy
! Clean residual min=-0.014117 max=0.019623 Jy/beam
! Clean residual mean=0.000045 rms=0.009044 Jy/beam
! Combined flux in latest and established models = 0.101322 Jy
! Performing phase self-cal
! Adding 56 model components to the UV plane model.
! The established model now contains 56 components and 0.101322 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.079604Jy  sigma=1.274177
! Fit after  self-cal, rms=0.078288Jy  sigma=1.255985
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.124 mas, bmaj=41.32 mas, bpa=-9.927 degrees
! Estimated noise=1.16065 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.036513 Jy
! Component: 100  -  total flux cleaned = 0.0544074 Jy
! Component: 150  -  total flux cleaned = 0.0613485 Jy
! Component: 200  -  total flux cleaned = 0.06593 Jy
! Total flux subtracted in 200 components = 0.06593 Jy
! Clean residual min=-0.010164 max=0.010259 Jy/beam
! Clean residual mean=-0.000061 rms=0.006944 Jy/beam
! Combined flux in latest and established models = 0.167252 Jy
! Performing phase self-cal
! Adding 149 model components to the UV plane model.
! The established model now contains 205 components and 0.167252 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.057004Jy  sigma=0.840221
! Fit after  self-cal, rms=0.056646Jy  sigma=0.832760
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.124 x 41.32 at -9.927 degrees (North through East)
! Clean map  min=-0.014695  max=0.069091 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    
! 
! 
! Fit before self-cal, rms=0.056646Jy  sigma=0.832760
! Fit after  self-cal, rms=0.056646Jy  sigma=0.832760
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.124 mas, bmaj=41.32 mas, bpa=-9.927 degrees
! Estimated noise=1.16065 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00396454 Jy
! Component: 100  -  total flux cleaned = 0.00771211 Jy
! Component: 150  -  total flux cleaned = 0.00970344 Jy
! Component: 200  -  total flux cleaned = 0.0117986 Jy
! Total flux subtracted in 200 components = 0.0117986 Jy
! Clean residual min=-0.005426 max=0.005423 Jy/beam
! Clean residual mean=-0.000039 rms=0.003868 Jy/beam
! Combined flux in latest and established models = 0.17905 Jy
! Performing phase self-cal
! Adding 159 model components to the UV plane model.
! The established model now contains 361 components and 0.17905 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.051333Jy  sigma=0.720229
! Fit after  self-cal, rms=0.051217Jy  sigma=0.717500
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.051217Jy  sigma=0.717500
! Fit after  self-cal, rms=0.051217Jy  sigma=0.717500
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.124 mas, bmaj=41.32 mas, bpa=-9.927 degrees
! Estimated noise=1.16065 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000504061 Jy
! Component: 100  -  total flux cleaned = 0.000234481 Jy
! Component: 150  -  total flux cleaned = -2.1806e-05 Jy
! Component: 200  -  total flux cleaned = -0.00065145 Jy
! Total flux subtracted in 200 components = -0.00065145 Jy
! Clean residual min=-0.003327 max=0.003319 Jy/beam
! Clean residual mean=-0.000042 rms=0.002272 Jy/beam
! Combined flux in latest and established models = 0.178399 Jy
selfcal
! Performing phase self-cal
! Adding 141 model components to the UV plane model.
! The established model now contains 496 components and 0.178399 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.049144Jy  sigma=0.673563
! Fit after  self-cal, rms=0.049120Jy  sigma=0.673001
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.67299e-05 Jy
! Component: 100  -  total flux cleaned = -0.000947439 Jy
! Component: 150  -  total flux cleaned = -0.00215078 Jy
! Component: 200  -  total flux cleaned = -0.00309504 Jy
! Total flux subtracted in 200 components = -0.00309504 Jy
! Clean residual min=-0.002115 max=0.002106 Jy/beam
! Clean residual mean=-0.000041 rms=0.001324 Jy/beam
! Combined flux in latest and established models = 0.175304 Jy
! Performing phase self-cal
! Adding 145 model components to the UV plane model.
! The established model now contains 621 components and 0.175304 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.048248Jy  sigma=0.655623
! Fit after  self-cal, rms=0.048262Jy  sigma=0.655403
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.048262Jy  sigma=0.655403
! Fit after  self-cal, rms=0.048606Jy  sigma=0.650111
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.132 mas, bmaj=41.29 mas, bpa=-9.928 degrees
! Estimated noise=1.17247 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0016724 Jy
! Component: 100  -  total flux cleaned = 0.000791201 Jy
! Component: 150  -  total flux cleaned = -7.76361e-05 Jy
! Component: 200  -  total flux cleaned = -0.00025167 Jy
! Total flux subtracted in 200 components = -0.00025167 Jy
! Clean residual min=-0.001364 max=0.001367 Jy/beam
! Clean residual mean=-0.000028 rms=0.000794 Jy/beam
! Combined flux in latest and established models = 0.175052 Jy
selfcal
! Performing phase self-cal
! Adding 125 model components to the UV plane model.
! The established model now contains 739 components and 0.175052 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.048213Jy  sigma=0.642938
! Fit after  self-cal, rms=0.048238Jy  sigma=0.642707
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000326531 Jy
! Component: 100  -  total flux cleaned = 9.23325e-05 Jy
! Component: 150  -  total flux cleaned = 0.000308947 Jy
! Component: 200  -  total flux cleaned = 0.000652726 Jy
! Total flux subtracted in 200 components = 0.000652726 Jy
! Clean residual min=-0.001127 max=0.001123 Jy/beam
! Clean residual mean=-0.000029 rms=0.000605 Jy/beam
! Combined flux in latest and established models = 0.175705 Jy
! Performing phase self-cal
! Adding 97 model components to the UV plane model.
! The established model now contains 825 components and 0.175705 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.048026Jy  sigma=0.639393
! Fit after  self-cal, rms=0.048041Jy  sigma=0.639266
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.048041Jy  sigma=0.639266
! Fit after  self-cal, rms=0.047664Jy  sigma=0.632981
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.538 mas, bmaj=41.12 mas, bpa=-9.689 degrees
! Estimated noise=1.144 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00141952 Jy
! Component: 100  -  total flux cleaned = -0.0030217 Jy
! Component: 150  -  total flux cleaned = -0.00346859 Jy
! Component: 200  -  total flux cleaned = -0.0035269 Jy
! Total flux subtracted in 200 components = -0.0035269 Jy
! Clean residual min=-0.000926 max=0.000929 Jy/beam
! Clean residual mean=-0.000035 rms=0.000456 Jy/beam
! Combined flux in latest and established models = 0.172178 Jy
selfcal
! Performing phase self-cal
! Adding 95 model components to the UV plane model.
! The established model now contains 909 components and 0.172178 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.047497Jy  sigma=0.629951
! Fit after  self-cal, rms=0.047495Jy  sigma=0.629841
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000439767 Jy
! Component: 100  -  total flux cleaned = -0.000228962 Jy
! Component: 150  -  total flux cleaned = 7.05251e-05 Jy
! Component: 200  -  total flux cleaned = 0.000118282 Jy
! Total flux subtracted in 200 components = 0.000118282 Jy
! Clean residual min=-0.000797 max=0.000793 Jy/beam
! Clean residual mean=-0.000032 rms=0.000394 Jy/beam
! Combined flux in latest and established models = 0.172296 Jy
! Performing phase self-cal
! Adding 72 model components to the UV plane model.
! The established model now contains 967 components and 0.172296 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.047395Jy  sigma=0.628393
! Fit after  self-cal, rms=0.047395Jy  sigma=0.628306
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=5.134 mas, bmaj=41.3 mas, bpa=-9.893 degrees
! Estimated noise=1.16235 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.134 x 41.3 at -9.893 degrees (North through East)
! Clean map  min=-0.01014  max=0.062304 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.442 mas, bmaj=45.03 mas, bpa=-10.07 degrees
! Estimated noise=1.60542 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0677592 Jy
! Component: 100  -  total flux cleaned = 0.105338 Jy
! Component: 150  -  total flux cleaned = 0.130763 Jy
! Component: 200  -  total flux cleaned = 0.14627 Jy
! Total flux subtracted in 200 components = 0.14627 Jy
! Clean residual min=-0.011109 max=0.011326 Jy/beam
! Clean residual mean=0.000004 rms=0.006076 Jy/beam
! Combined flux in latest and established models = 0.14627 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 110 model components to the UV plane model.
! The established model now contains 110 components and 0.14627 Jy
! Inverting map and beam 
! Estimated beam: bmin=5.134 mas, bmaj=41.3 mas, bpa=-9.893 degrees
! Estimated noise=1.16235 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0153177 Jy
! Component: 100  -  total flux cleaned = 0.0229514 Jy
! Component: 150  -  total flux cleaned = 0.0258632 Jy
! Component: 200  -  total flux cleaned = 0.0294923 Jy
! Total flux subtracted in 200 components = 0.0294923 Jy
! Clean residual min=-0.008129 max=0.008145 Jy/beam
! Clean residual mean=-0.000041 rms=0.005635 Jy/beam
! Combined flux in latest and established models = 0.175762 Jy
! Adding 165 model components to the UV plane model.
! The established model now contains 272 components and 0.175762 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.538 mas, bmaj=41.12 mas, bpa=-9.689 degrees
! Estimated noise=1.144 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00455381 Jy
! Component: 100  -  total flux cleaned = 0.00450278 Jy
! Component: 150  -  total flux cleaned = 0.00631037 Jy
! Component: 200  -  total flux cleaned = 0.00631657 Jy
! Total flux subtracted in 200 components = 0.00631657 Jy
! Clean residual min=-0.004934 max=0.004954 Jy/beam
! Clean residual mean=-0.000043 rms=0.003455 Jy/beam
! Combined flux in latest and established models = 0.182078 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000536044 Jy
! Component: 100  -  total flux cleaned = -0.000791307 Jy
! Component: 150  -  total flux cleaned = -0.00222536 Jy
! Component: 200  -  total flux cleaned = -0.00333004 Jy
! Total flux subtracted in 200 components = -0.00333004 Jy
! Clean residual min=-0.003590 max=0.003576 Jy/beam
! Clean residual mean=-0.000056 rms=0.001969 Jy/beam
! Combined flux in latest and established models = 0.178748 Jy
! Adding 276 model components to the UV plane model.
! The established model now contains 542 components and 0.178748 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=5.134 mas, bmaj=41.3 mas, bpa=-9.893 degrees
! Estimated noise=1.16235 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00227917 Jy
! Component: 100  -  total flux cleaned = 0.00229499 Jy
! Component: 150  -  total flux cleaned = 0.00135025 Jy
! Component: 200  -  total flux cleaned = 0.000816913 Jy
! Total flux subtracted in 200 components = 0.000816913 Jy
! Clean residual min=-0.001676 max=0.001680 Jy/beam
! Clean residual mean=-0.000045 rms=0.000887 Jy/beam
! Combined flux in latest and established models = 0.179565 Jy
selfcal
! Performing phase self-cal
! Adding 114 model components to the UV plane model.
! The established model now contains 655 components and 0.179565 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.048090Jy  sigma=0.641412
! Fit after  self-cal, rms=0.048073Jy  sigma=0.640698
wmodel /scr/pima/bp192a0_uvs/J0236-3745_C_map.mod
! Writing 655 model components to file: /scr/pima/bp192a0_uvs/J0236-3745_C_map.mod
wobs /scr/pima/bp192a0_uvs/J0236-3745_C_uvs.fits
! Writing UV FITS file: /scr/pima/bp192a0_uvs/J0236-3745_C_uvs.fits
wwins /scr/pima/bp192a0_uvs/J0236-3745_C_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/scr/pima/bp192a0_uvs/J0236-3745_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.134 x 41.3 at -9.893 degrees (North through East)
! Clean map  min=-0.0096364  max=0.061063 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp192a0_uvs/J0236-3745_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.061063 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000897733 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -4.41052 4.41052 8.82105 17.6421 35.2842 70.5684
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0026 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.061 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  68.019 
quit
! Quitting program
! Log file /scr/pima/bp192a0_uvs/J0236-3745_C_uvs.log closed on Fri Aug 21 07:25:07 2015