! Started logfile: /scr/pima/bp192a0_uvs/J0108+0135_X_uvs.log on Fri Aug 21 06:51:31 2015
obs /scr/pima/bp192a0_uvs/J0108+0135_X_uva.fits
! Reading UV FITS file: /scr/pima/bp192a0_uvs/J0108+0135_X_uva.fits
! AN table 1: 36 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.779012 visibilities/baseline/integration-bin.
! Found source: J0108+0135
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 10096 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp192a0_uvs/J0108+0135_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=2.412357Jy  sigma=49.618525
! Fit after  self-cal, rms=1.316729Jy  sigma=27.234912
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8375 mas, bmaj=2.037 mas, bpa=-0.8863 degrees
! Estimated noise=0.599789 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.45834 Jy
! Component: 100  -  total flux cleaned = 1.95533 Jy
! Total flux subtracted in 100 components = 1.95533 Jy
! Clean residual min=-0.119953 max=0.316921 Jy/beam
! Clean residual mean=-0.000250 rms=0.040920 Jy/beam
! Combined flux in latest and established models = 1.95533 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 1.95533 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.683050Jy  sigma=13.623382
! Fit after  self-cal, rms=0.677192Jy  sigma=13.537698
! Inverting map 
! Added new window around map position (-1, -1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.326139 Jy
! Component: 100  -  total flux cleaned = 0.509942 Jy
! Total flux subtracted in 100 components = 0.509942 Jy
! Clean residual min=-0.091515 max=0.114999 Jy/beam
! Clean residual mean=-0.000196 rms=0.022022 Jy/beam
! Combined flux in latest and established models = 2.46528 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 23 components and 2.46528 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.406136Jy  sigma=7.821959
! Fit after  self-cal, rms=0.392027Jy  sigma=7.570277
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.140018 Jy
! Component: 100  -  total flux cleaned = 0.224465 Jy
! Total flux subtracted in 100 components = 0.224465 Jy
! Clean residual min=-0.082841 max=0.064265 Jy/beam
! Clean residual mean=-0.000173 rms=0.015633 Jy/beam
! Combined flux in latest and established models = 2.68974 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 37 components and 2.68974 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.307316Jy  sigma=5.960395
! Fit after  self-cal, rms=0.302904Jy  sigma=5.878063
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.131 mas, bmaj=2.427 mas, bpa=-4.643 degrees
! Estimated noise=0.352153 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0977323 Jy
! Component: 100  -  total flux cleaned = 0.153799 Jy
! Component: 150  -  total flux cleaned = 0.190859 Jy
! Component: 200  -  total flux cleaned = 0.215607 Jy
! Total flux subtracted in 200 components = 0.215607 Jy
! Clean residual min=-0.094385 max=0.056730 Jy/beam
! Clean residual mean=-0.000270 rms=0.018422 Jy/beam
! Combined flux in latest and established models = 2.90535 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 63 components and 2.90535 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.262790Jy  sigma=5.253430
! Fit after  self-cal, rms=0.260664Jy  sigma=5.216991
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.131 x 2.427 at -4.643 degrees (North through East)
! Clean map  min=-0.088815  max=1.9416 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.16     FD        1.12     HN        0.95     KP        0.91     
!   LA        1.03     MK        1.02     NL        0.94     OV        1.01     
!   PT        0.86     SC        0.98     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.99     HN        0.94     KP        1.04     
!   LA        0.96     MK        1.04     NL        0.97     OV        0.97     
!   PT        0.88     SC        0.95     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.85     FD        1.09     HN        0.99     KP        1.14     
!   LA        0.94     MK        1.08     NL        0.97     OV        1.03     
!   PT        0.90     SC        0.98     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.09     HN        1.04     KP        1.01     
!   LA        0.99     MK        1.10     NL        0.91     OV        1.01     
!   PT        0.92     SC        1.02     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        1.00     KP        1.14     
!   LA        1.00     MK        0.97     NL        1.04     OV        0.99     
!   PT        0.87     SC        0.96     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.06     HN        1.10     KP        1.13     
!   LA        1.06     MK        1.00     NL        1.09     OV        1.05     
!   PT        0.91     SC        1.00     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.02     HN        1.02     KP        1.10     
!   LA        0.98     MK        0.99     NL        0.87     OV        1.06     
!   PT        0.89     SC        0.98     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.260664Jy  sigma=5.216991
! Fit after  self-cal, rms=0.154741Jy  sigma=2.786020
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.133 mas, bmaj=2.428 mas, bpa=-4.226 degrees
! Estimated noise=0.353378 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-6, -2.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0319056 Jy
! Component: 100  -  total flux cleaned = 0.0368759 Jy
! Component: 150  -  total flux cleaned = 0.0416424 Jy
! Component: 200  -  total flux cleaned = 0.0452457 Jy
! Total flux subtracted in 200 components = 0.0452457 Jy
! Clean residual min=-0.028608 max=0.020364 Jy/beam
! Clean residual mean=-0.000032 rms=0.005461 Jy/beam
! Combined flux in latest and established models = 2.95059 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 82 components and 2.95059 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.145715Jy  sigma=2.619267
! Fit after  self-cal, rms=0.144701Jy  sigma=2.604218
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.144701Jy  sigma=2.604218
! Fit after  self-cal, rms=0.144161Jy  sigma=2.590541
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.133 mas, bmaj=2.425 mas, bpa=-4.07 degrees
! Estimated noise=0.354073 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00663973 Jy
! Component: 100  -  total flux cleaned = 0.0109252 Jy
! Component: 150  -  total flux cleaned = 0.0132129 Jy
! Component: 200  -  total flux cleaned = 0.0148725 Jy
! Total flux subtracted in 200 components = 0.0148725 Jy
! Clean residual min=-0.027188 max=0.019269 Jy/beam
! Clean residual mean=-0.000037 rms=0.005269 Jy/beam
! Combined flux in latest and established models = 2.96547 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 91 components and 2.96547 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.140098Jy  sigma=2.523308
! Fit after  self-cal, rms=0.139448Jy  sigma=2.514530
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00115669 Jy
! Component: 100  -  total flux cleaned = 0.00274716 Jy
! Component: 150  -  total flux cleaned = 0.0031053 Jy
! Component: 200  -  total flux cleaned = 0.00410018 Jy
! Total flux subtracted in 200 components = 0.00410018 Jy
! Clean residual min=-0.025368 max=0.017594 Jy/beam
! Clean residual mean=-0.000036 rms=0.005071 Jy/beam
! Combined flux in latest and established models = 2.96957 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 97 components and 2.96957 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.137129Jy  sigma=2.474279
! Fit after  self-cal, rms=0.136605Jy  sigma=2.467363
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.136605Jy  sigma=2.467363
! Fit after  self-cal, rms=0.136251Jy  sigma=2.456918
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.133 mas, bmaj=2.422 mas, bpa=-3.886 degrees
! Estimated noise=0.355189 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00682163 Jy
! Component: 100  -  total flux cleaned = 0.0104444 Jy
! Component: 150  -  total flux cleaned = 0.0131518 Jy
! Component: 200  -  total flux cleaned = 0.0149554 Jy
! Total flux subtracted in 200 components = 0.0149554 Jy
! Clean residual min=-0.024423 max=0.017552 Jy/beam
! Clean residual mean=-0.000038 rms=0.005067 Jy/beam
! Combined flux in latest and established models = 2.98452 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 104 components and 2.98452 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.133785Jy  sigma=2.419347
! Fit after  self-cal, rms=0.133350Jy  sigma=2.413761
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000669085 Jy
! Component: 100  -  total flux cleaned = 0.00268647 Jy
! Component: 150  -  total flux cleaned = 0.00346099 Jy
! Component: 200  -  total flux cleaned = 0.00419128 Jy
! Total flux subtracted in 200 components = 0.00419128 Jy
! Clean residual min=-0.022848 max=0.016526 Jy/beam
! Clean residual mean=-0.000037 rms=0.004952 Jy/beam
! Combined flux in latest and established models = 2.98871 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 110 components and 2.98871 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.132007Jy  sigma=2.390585
! Fit after  self-cal, rms=0.131675Jy  sigma=2.386395
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.131675Jy  sigma=2.386395
! Fit after  self-cal, rms=0.131366Jy  sigma=2.376707
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.32 mas, bmaj=3.556 mas, bpa=-12.57 degrees
! Estimated noise=0.415174 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0164041 Jy
! Component: 100  -  total flux cleaned = 0.0188719 Jy
! Component: 150  -  total flux cleaned = 0.0201008 Jy
! Component: 200  -  total flux cleaned = 0.0211457 Jy
! Total flux subtracted in 200 components = 0.0211457 Jy
! Clean residual min=-0.025885 max=0.019990 Jy/beam
! Clean residual mean=-0.000068 rms=0.006474 Jy/beam
! Combined flux in latest and established models = 3.00986 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 119 components and 3.00986 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.130203Jy  sigma=2.358050
! Fit after  self-cal, rms=0.129890Jy  sigma=2.353429
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000544945 Jy
! Component: 100  -  total flux cleaned = 0.00106794 Jy
! Component: 150  -  total flux cleaned = 0.00172163 Jy
! Component: 200  -  total flux cleaned = 0.00115373 Jy
! Total flux subtracted in 200 components = 0.00115373 Jy
! Clean residual min=-0.025271 max=0.020129 Jy/beam
! Clean residual mean=-0.000067 rms=0.006334 Jy/beam
! Combined flux in latest and established models = 3.01101 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 131 components and 3.01101 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.129654Jy  sigma=2.349904
! Fit after  self-cal, rms=0.129362Jy  sigma=2.345970
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.133 mas, bmaj=2.419 mas, bpa=-3.712 degrees
! Estimated noise=0.356406 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.133 x 2.419 at -3.712 degrees (North through East)
! Clean map  min=-0.02063  max=1.9497 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.129362Jy  sigma=2.345970
! Fit after  self-cal, rms=0.121745Jy  sigma=2.187524
! Inverting map and beam 
! Estimated beam: bmin=1.134 mas, bmaj=2.414 mas, bpa=-3.44 degrees
! Estimated noise=0.357888 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0072456 Jy
! Component: 100  -  total flux cleaned = 0.0081945 Jy
! Component: 150  -  total flux cleaned = 0.00872384 Jy
! Component: 200  -  total flux cleaned = 0.00896562 Jy
! Total flux subtracted in 200 components = 0.00896562 Jy
! Clean residual min=-0.019343 max=0.015801 Jy/beam
! Clean residual mean=-0.000036 rms=0.004547 Jy/beam
! Combined flux in latest and established models = 3.01998 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 142 components and 3.01998 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.120080Jy  sigma=2.163203
! Fit after  self-cal, rms=0.119884Jy  sigma=2.160830
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000546322 Jy
! Component: 100  -  total flux cleaned = 0.000772443 Jy
! Component: 150  -  total flux cleaned = 0.000991763 Jy
! Component: 200  -  total flux cleaned = 0.00120356 Jy
! Total flux subtracted in 200 components = 0.00120356 Jy
! Clean residual min=-0.019026 max=0.015217 Jy/beam
! Clean residual mean=-0.000036 rms=0.004480 Jy/beam
! Combined flux in latest and established models = 3.02118 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 146 components and 3.02118 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.118971Jy  sigma=2.144940
! Fit after  self-cal, rms=0.118799Jy  sigma=2.143142
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.118799Jy  sigma=2.143142
! Fit after  self-cal, rms=0.113849Jy  sigma=2.049975
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8396 mas, bmaj=2.028 mas, bpa=0.1913 degrees
! Estimated noise=0.604346 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.47601 Jy
! Component: 100  -  total flux cleaned = 2.03533 Jy
! Component: 150  -  total flux cleaned = 2.33548 Jy
! Component: 200  -  total flux cleaned = 2.52107 Jy
! Total flux subtracted in 200 components = 2.52107 Jy
! Clean residual min=-0.047125 max=0.097628 Jy/beam
! Clean residual mean=-0.000099 rms=0.016115 Jy/beam
! Combined flux in latest and established models = 2.52107 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 2.52107 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.134 mas, bmaj=2.413 mas, bpa=-3.342 degrees
! Estimated noise=0.358656 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.184147 Jy
! Component: 100  -  total flux cleaned = 0.28539 Jy
! Component: 150  -  total flux cleaned = 0.346864 Jy
! Component: 200  -  total flux cleaned = 0.387406 Jy
! Total flux subtracted in 200 components = 0.387406 Jy
! Clean residual min=-0.028158 max=0.033561 Jy/beam
! Clean residual mean=-0.000063 rms=0.007311 Jy/beam
! Combined flux in latest and established models = 2.90848 Jy
! Adding 66 model components to the UV plane model.
! The established model now contains 83 components and 2.90848 Jy
! Inverting map 
! Added new window around map position (-29.8, 45.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0342902 Jy
! Component: 100  -  total flux cleaned = 0.0572386 Jy
! Component: 150  -  total flux cleaned = 0.0729077 Jy
! Component: 200  -  total flux cleaned = 0.0837724 Jy
! Total flux subtracted in 200 components = 0.0837724 Jy
! Clean residual min=-0.021347 max=0.019995 Jy/beam
! Clean residual mean=-0.000034 rms=0.004675 Jy/beam
! Combined flux in latest and established models = 2.99225 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 110 components and 2.99225 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.326 mas, bmaj=3.548 mas, bpa=-12.33 degrees
! Estimated noise=0.417422 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0185021 Jy
! Component: 100  -  total flux cleaned = 0.0280826 Jy
! Component: 150  -  total flux cleaned = 0.0308805 Jy
! Component: 200  -  total flux cleaned = 0.0329711 Jy
! Total flux subtracted in 200 components = 0.0329711 Jy
! Clean residual min=-0.020741 max=0.019185 Jy/beam
! Clean residual mean=-0.000067 rms=0.005510 Jy/beam
! Combined flux in latest and established models = 3.02522 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00121951 Jy
! Component: 100  -  total flux cleaned = 0.00178653 Jy
! Component: 150  -  total flux cleaned = 0.00230734 Jy
! Component: 200  -  total flux cleaned = 0.00278718 Jy
! Total flux subtracted in 200 components = 0.00278718 Jy
! Clean residual min=-0.020092 max=0.017787 Jy/beam
! Clean residual mean=-0.000068 rms=0.005312 Jy/beam
! Combined flux in latest and established models = 3.02801 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 138 components and 3.02801 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.134 mas, bmaj=2.413 mas, bpa=-3.342 degrees
! Estimated noise=0.358656 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00108009 Jy
! Component: 100  -  total flux cleaned = 0.0037453 Jy
! Component: 150  -  total flux cleaned = 0.00460235 Jy
! Component: 200  -  total flux cleaned = 0.00460991 Jy
! Total flux subtracted in 200 components = 0.00460991 Jy
! Clean residual min=-0.017466 max=0.014230 Jy/beam
! Clean residual mean=-0.000037 rms=0.003815 Jy/beam
! Combined flux in latest and established models = 3.03262 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 156 components and 3.03262 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.109137Jy  sigma=1.978595
! Fit after  self-cal, rms=0.107914Jy  sigma=1.955359
wmodel /scr/pima/bp192a0_uvs/J0108+0135_X_map.mod
! Writing 156 model components to file: /scr/pima/bp192a0_uvs/J0108+0135_X_map.mod
wobs /scr/pima/bp192a0_uvs/J0108+0135_X_uvs.fits
! Writing UV FITS file: /scr/pima/bp192a0_uvs/J0108+0135_X_uvs.fits
wwins /scr/pima/bp192a0_uvs/J0108+0135_X_map.win
! wwins: Wrote 4 windows to /scr/pima/bp192a0_uvs/J0108+0135_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00741282 Jy
! Component: 100  -  total flux cleaned = -0.0116948 Jy
! Component: 150  -  total flux cleaned = -0.0146708 Jy
! Component: 200  -  total flux cleaned = -0.0167848 Jy
! Component: 250  -  total flux cleaned = -0.0183747 Jy
! Component: 300  -  total flux cleaned = -0.0187446 Jy
! Component: 350  -  total flux cleaned = -0.0191075 Jy
! Component: 400  -  total flux cleaned = -0.020158 Jy
! Component: 450  -  total flux cleaned = -0.0206623 Jy
! Component: 500  -  total flux cleaned = -0.0206615 Jy
! Component: 550  -  total flux cleaned = -0.02098 Jy
! Component: 600  -  total flux cleaned = -0.0211307 Jy
! Component: 650  -  total flux cleaned = -0.0215805 Jy
! Component: 700  -  total flux cleaned = -0.0218761 Jy
! Component: 750  -  total flux cleaned = -0.0224507 Jy
! Component: 800  -  total flux cleaned = -0.0225942 Jy
! Component: 850  -  total flux cleaned = -0.0227349 Jy
! Component: 900  -  total flux cleaned = -0.0229999 Jy
! Component: 950  -  total flux cleaned = -0.0232571 Jy
! Component: 1000  -  total flux cleaned = -0.0235142 Jy
! Component: 1050  -  total flux cleaned = -0.0238895 Jy
! Component: 1100  -  total flux cleaned = -0.0241388 Jy
! Component: 1150  -  total flux cleaned = -0.02438 Jy
! Component: 1200  -  total flux cleaned = -0.0249731 Jy
! Component: 1250  -  total flux cleaned = -0.0257842 Jy
! Component: 1300  -  total flux cleaned = -0.0263574 Jy
! Component: 1350  -  total flux cleaned = -0.027142 Jy
! Component: 1400  -  total flux cleaned = -0.0279138 Jy
! Component: 1450  -  total flux cleaned = -0.0288899 Jy
! Component: 1500  -  total flux cleaned = -0.0297428 Jy
! Component: 1550  -  total flux cleaned = -0.0303733 Jy
! Component: 1600  -  total flux cleaned = -0.0311989 Jy
! Component: 1650  -  total flux cleaned = -0.0317075 Jy
! Component: 1700  -  total flux cleaned = -0.0325098 Jy
! Component: 1750  -  total flux cleaned = -0.0328051 Jy
! Component: 1800  -  total flux cleaned = -0.0332924 Jy
! Component: 1850  -  total flux cleaned = -0.0340604 Jy
! Component: 1900  -  total flux cleaned = -0.0341549 Jy
! Component: 1950  -  total flux cleaned = -0.0346238 Jy
! Component: 2000  -  total flux cleaned = -0.0349945 Jy
! Component: 2050  -  total flux cleaned = -0.0354521 Jy
! Component: 2100  -  total flux cleaned = -0.0356339 Jy
! Component: 2150  -  total flux cleaned = -0.0360818 Jy
! Component: 2200  -  total flux cleaned = -0.0367902 Jy
! Component: 2250  -  total flux cleaned = -0.0373146 Jy
! Component: 2300  -  total flux cleaned = -0.0380918 Jy
! Component: 2350  -  total flux cleaned = -0.0386032 Jy
! Component: 2400  -  total flux cleaned = -0.038772 Jy
! Component: 2450  -  total flux cleaned = -0.0392751 Jy
! Component: 2500  -  total flux cleaned = -0.0396899 Jy
! Component: 2550  -  total flux cleaned = -0.0402648 Jy
! Component: 2600  -  total flux cleaned = -0.0406715 Jy
! Component: 2650  -  total flux cleaned = -0.0412354 Jy
! Component: 2700  -  total flux cleaned = -0.0417134 Jy
! Component: 2750  -  total flux cleaned = -0.0421079 Jy
! Component: 2800  -  total flux cleaned = -0.042499 Jy
! Component: 2850  -  total flux cleaned = -0.0429636 Jy
! Component: 2900  -  total flux cleaned = -0.043347 Jy
! Component: 2950  -  total flux cleaned = -0.0436507 Jy
! Component: 3000  -  total flux cleaned = -0.0441772 Jy
! Component: 3050  -  total flux cleaned = -0.0446988 Jy
! Component: 3100  -  total flux cleaned = -0.0449202 Jy
! Component: 3150  -  total flux cleaned = -0.0450668 Jy
! Component: 3200  -  total flux cleaned = -0.0455025 Jy
! Component: 3250  -  total flux cleaned = -0.0456463 Jy
! Component: 3300  -  total flux cleaned = -0.0462171 Jy
! Component: 3350  -  total flux cleaned = -0.0464289 Jy
! Component: 3400  -  total flux cleaned = -0.0466397 Jy
! Component: 3450  -  total flux cleaned = -0.0471263 Jy
! Component: 3500  -  total flux cleaned = -0.0471949 Jy
! Component: 3550  -  total flux cleaned = -0.0475374 Jy
! Component: 3600  -  total flux cleaned = -0.0478101 Jy
! Component: 3650  -  total flux cleaned = -0.0482154 Jy
! Component: 3700  -  total flux cleaned = -0.0484829 Jy
! Component: 3750  -  total flux cleaned = -0.0485496 Jy
! Component: 3800  -  total flux cleaned = -0.0487485 Jy
! Component: 3850  -  total flux cleaned = -0.0490111 Jy
! Component: 3900  -  total flux cleaned = -0.049142 Jy
! Component: 3950  -  total flux cleaned = -0.0493364 Jy
! Component: 4000  -  total flux cleaned = -0.0496589 Jy
! Component: 4050  -  total flux cleaned = -0.0499147 Jy
! Total flux subtracted in 4096 components = -0.0499783 Jy
! Clean residual min=-0.003751 max=0.003752 Jy/beam
! Clean residual mean=0.000006 rms=0.001131 Jy/beam
! Combined flux in latest and established models = 2.98264 Jy
keep
! Adding 276 model components to the UV plane model.
! The established model now contains 432 components and 2.98264 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bp192a0_uvs/J0108+0135_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.134 x 2.413 at -3.342 degrees (North through East)
! Clean map  min=-0.012377  max=1.9544 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp192a0_uvs/J0108+0135_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 1.95445 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00107991 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.165762 0.165762 0.331524 0.663048 1.3261 2.65219 5.30438 10.6088 21.2175 42.4351 84.8701
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0032 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.954 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1809.82 
quit
! Quitting program
! Log file /scr/pima/bp192a0_uvs/J0108+0135_X_uvs.log closed on Fri Aug 21 06:51:36 2015