! Started logfile: /scr/pima/bp192a0_uvs/J0037-0533_X_uvs.log on Fri Aug 21 06:50:58 2015
obs /scr/pima/bp192a0_uvs/J0037-0533_X_uva.fits
! Reading UV FITS file: /scr/pima/bp192a0_uvs/J0037-0533_X_uva.fits
! AN table 1: 20 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.637778 visibilities/baseline/integration-bin.
! Found source: J0037-0533
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 4592 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp192a0_uvs/J0037-0533_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.000203Jy  sigma=21.644368
! Fit after  self-cal, rms=0.980590Jy  sigma=21.438643
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8966 mas, bmaj=2.488 mas, bpa=-11.46 degrees
! Estimated noise=0.802976 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0145067 Jy
! Component: 100  -  total flux cleaned = 0.0181224 Jy
! Total flux subtracted in 100 components = 0.0181224 Jy
! Clean residual min=-0.002871 max=0.002951 Jy/beam
! Clean residual mean=-0.000000 rms=0.000702 Jy/beam
! Combined flux in latest and established models = 0.0181224 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.0181224 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.034949Jy  sigma=0.681653
! Fit after  self-cal, rms=0.033360Jy  sigma=0.642375
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00413955 Jy
! Component: 100  -  total flux cleaned = 0.00545411 Jy
! Total flux subtracted in 100 components = 0.00545411 Jy
! Clean residual min=-0.002273 max=0.002337 Jy/beam
! Clean residual mean=-0.000001 rms=0.000639 Jy/beam
! Combined flux in latest and established models = 0.0235765 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 15 components and 0.0235765 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032872Jy  sigma=0.635142
! Fit after  self-cal, rms=0.032863Jy  sigma=0.635035
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.127 mas, bmaj=2.91 mas, bpa=-11.7 degrees
! Estimated noise=0.492504 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0002872 Jy
! Component: 100  -  total flux cleaned = -0.000286943 Jy
! Component: 150  -  total flux cleaned = -0.000287249 Jy
! Component: 200  -  total flux cleaned = -0.000300851 Jy
! Total flux subtracted in 200 components = -0.000300851 Jy
! Clean residual min=-0.001520 max=0.001753 Jy/beam
! Clean residual mean=-0.000003 rms=0.000405 Jy/beam
! Combined flux in latest and established models = 0.0232756 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 25 components and 0.0232756 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032850Jy  sigma=0.634630
! Fit after  self-cal, rms=0.032847Jy  sigma=0.634595
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.127 x 2.91 at -11.7 degrees (North through East)
! Clean map  min=-0.0014346  max=0.021475 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.032847Jy  sigma=0.634595
! Fit after  self-cal, rms=0.030556Jy  sigma=0.635002
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.127 mas, bmaj=2.911 mas, bpa=-11.68 degrees
! Estimated noise=0.491592 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.59708e-05 Jy
! Component: 100  -  total flux cleaned = 0.000112423 Jy
! Component: 150  -  total flux cleaned = 0.000147207 Jy
! Component: 200  -  total flux cleaned = 0.000157834 Jy
! Total flux subtracted in 200 components = 0.000157834 Jy
! Clean residual min=-0.001528 max=0.001805 Jy/beam
! Clean residual mean=-0.000003 rms=0.000401 Jy/beam
! Combined flux in latest and established models = 0.0234335 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 30 components and 0.0234335 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030546Jy  sigma=0.634794
! Fit after  self-cal, rms=0.030543Jy  sigma=0.634777
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030543Jy  sigma=0.634777
! Fit after  self-cal, rms=0.030653Jy  sigma=0.634472
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.127 mas, bmaj=2.922 mas, bpa=-11.68 degrees
! Estimated noise=0.492953 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.1566e-05 Jy
! Component: 100  -  total flux cleaned = -5.18432e-05 Jy
! Component: 150  -  total flux cleaned = -6.09993e-05 Jy
! Component: 200  -  total flux cleaned = -6.07725e-05 Jy
! Total flux subtracted in 200 components = -6.07725e-05 Jy
! Clean residual min=-0.001506 max=0.001725 Jy/beam
! Clean residual mean=-0.000003 rms=0.000389 Jy/beam
! Combined flux in latest and established models = 0.0233727 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 31 components and 0.0233727 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030647Jy  sigma=0.634348
! Fit after  self-cal, rms=0.030652Jy  sigma=0.634268
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (7, -44.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00142783 Jy
! Component: 100  -  total flux cleaned = 0.00163242 Jy
! Component: 150  -  total flux cleaned = 0.00161787 Jy
! Component: 200  -  total flux cleaned = 0.00157135 Jy
! Total flux subtracted in 200 components = 0.00157135 Jy
! Clean residual min=-0.001303 max=0.001199 Jy/beam
! Clean residual mean=-0.000003 rms=0.000343 Jy/beam
! Combined flux in latest and established models = 0.024944 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 49 components and 0.024944 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030583Jy  sigma=0.632742
! Fit after  self-cal, rms=0.030549Jy  sigma=0.632354
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030549Jy  sigma=0.632354
! Fit after  self-cal, rms=0.030433Jy  sigma=0.631869
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.131 mas, bmaj=2.924 mas, bpa=-11.61 degrees
! Estimated noise=0.492747 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000369874 Jy
! Component: 100  -  total flux cleaned = 0.000318753 Jy
! Component: 150  -  total flux cleaned = 0.000288285 Jy
! Component: 200  -  total flux cleaned = 0.000248152 Jy
! Total flux subtracted in 200 components = 0.000248152 Jy
! Clean residual min=-0.001293 max=0.001190 Jy/beam
! Clean residual mean=-0.000003 rms=0.000320 Jy/beam
! Combined flux in latest and established models = 0.0251922 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 54 components and 0.0251922 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030413Jy  sigma=0.631410
! Fit after  self-cal, rms=0.030402Jy  sigma=0.631183
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00010319 Jy
! Component: 100  -  total flux cleaned = 6.11585e-05 Jy
! Component: 150  -  total flux cleaned = 4.84659e-05 Jy
! Component: 200  -  total flux cleaned = 5.99273e-05 Jy
! Total flux subtracted in 200 components = 5.99273e-05 Jy
! Clean residual min=-0.001322 max=0.001181 Jy/beam
! Clean residual mean=-0.000003 rms=0.000317 Jy/beam
! Combined flux in latest and established models = 0.0252521 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 59 components and 0.0252521 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030390Jy  sigma=0.630932
! Fit after  self-cal, rms=0.030383Jy  sigma=0.630894
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030383Jy  sigma=0.630894
! Fit after  self-cal, rms=0.030220Jy  sigma=0.630588
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.569 mas, bmaj=4.186 mas, bpa=5.276 degrees
! Estimated noise=0.570932 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.31481e-05 Jy
! Component: 100  -  total flux cleaned = -6.81051e-06 Jy
! Component: 150  -  total flux cleaned = -3.71025e-05 Jy
! Component: 200  -  total flux cleaned = -3.69659e-05 Jy
! Total flux subtracted in 200 components = -3.69659e-05 Jy
! Clean residual min=-0.001355 max=0.001152 Jy/beam
! Clean residual mean=-0.000004 rms=0.000362 Jy/beam
! Combined flux in latest and established models = 0.0252151 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 70 components and 0.0252151 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030216Jy  sigma=0.630522
! Fit after  self-cal, rms=0.030213Jy  sigma=0.630417
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.4323e-05 Jy
! Component: 100  -  total flux cleaned = -4.2402e-05 Jy
! Component: 150  -  total flux cleaned = -6.54142e-05 Jy
! Component: 200  -  total flux cleaned = -6.51197e-05 Jy
! Total flux subtracted in 200 components = -6.51197e-05 Jy
! Clean residual min=-0.001342 max=0.001144 Jy/beam
! Clean residual mean=-0.000004 rms=0.000358 Jy/beam
! Combined flux in latest and established models = 0.02515 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 74 components and 0.02515 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030210Jy  sigma=0.630381
! Fit after  self-cal, rms=0.030205Jy  sigma=0.630358
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.136 mas, bmaj=2.921 mas, bpa=-11.5 degrees
! Estimated noise=0.489983 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.136 x 2.921 at -11.5 degrees (North through East)
! Clean map  min=-0.0012131  max=0.021284 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9049 mas, bmaj=2.482 mas, bpa=-11.25 degrees
! Estimated noise=0.853461 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0175331 Jy
! Component: 100  -  total flux cleaned = 0.0221687 Jy
! Component: 150  -  total flux cleaned = 0.0241738 Jy
! Component: 200  -  total flux cleaned = 0.0254381 Jy
! Total flux subtracted in 200 components = 0.0254381 Jy
! Clean residual min=-0.002302 max=0.002090 Jy/beam
! Clean residual mean=-0.000001 rms=0.000583 Jy/beam
! Combined flux in latest and established models = 0.0254381 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.0254381 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.136 mas, bmaj=2.921 mas, bpa=-11.5 degrees
! Estimated noise=0.489983 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000421054 Jy
! Component: 100  -  total flux cleaned = -0.000489167 Jy
! Component: 150  -  total flux cleaned = -0.000415235 Jy
! Component: 200  -  total flux cleaned = -0.000349823 Jy
! Total flux subtracted in 200 components = -0.000349823 Jy
! Clean residual min=-0.001316 max=0.001287 Jy/beam
! Clean residual mean=-0.000003 rms=0.000334 Jy/beam
! Combined flux in latest and established models = 0.0250883 Jy
! Adding 16 model components to the UV plane model.
! The established model now contains 26 components and 0.0250883 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.569 mas, bmaj=4.186 mas, bpa=5.276 degrees
! Estimated noise=0.570932 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000161158 Jy
! Component: 100  -  total flux cleaned = 8.92345e-05 Jy
! Component: 150  -  total flux cleaned = 4.57923e-05 Jy
! Component: 200  -  total flux cleaned = 2.18908e-05 Jy
! Total flux subtracted in 200 components = 2.18908e-05 Jy
! Clean residual min=-0.001428 max=0.001186 Jy/beam
! Clean residual mean=-0.000005 rms=0.000376 Jy/beam
! Combined flux in latest and established models = 0.0251102 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.05661e-05 Jy
! Component: 100  -  total flux cleaned = 2.39804e-07 Jy
! Component: 150  -  total flux cleaned = 1.93871e-07 Jy
! Component: 200  -  total flux cleaned = 3.98378e-07 Jy
! Total flux subtracted in 200 components = 3.98378e-07 Jy
! Clean residual min=-0.001388 max=0.001162 Jy/beam
! Clean residual mean=-0.000004 rms=0.000370 Jy/beam
! Combined flux in latest and established models = 0.0251106 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 44 components and 0.0251106 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.136 mas, bmaj=2.921 mas, bpa=-11.5 degrees
! Estimated noise=0.489983 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.55467e-05 Jy
! Component: 100  -  total flux cleaned = -9.22452e-05 Jy
! Component: 150  -  total flux cleaned = -7.70131e-05 Jy
! Component: 200  -  total flux cleaned = -7.66609e-05 Jy
! Total flux subtracted in 200 components = -7.66609e-05 Jy
! Clean residual min=-0.001292 max=0.001110 Jy/beam
! Clean residual mean=-0.000003 rms=0.000311 Jy/beam
! Combined flux in latest and established models = 0.0250339 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 57 components and 0.0250339 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030220Jy  sigma=0.630599
! Fit after  self-cal, rms=0.030215Jy  sigma=0.630516
wmodel /scr/pima/bp192a0_uvs/J0037-0533_X_map.mod
! Writing 57 model components to file: /scr/pima/bp192a0_uvs/J0037-0533_X_map.mod
wobs /scr/pima/bp192a0_uvs/J0037-0533_X_uvs.fits
! Writing UV FITS file: /scr/pima/bp192a0_uvs/J0037-0533_X_uvs.fits
wwins /scr/pima/bp192a0_uvs/J0037-0533_X_map.win
! wwins: Wrote 2 windows to /scr/pima/bp192a0_uvs/J0037-0533_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.0004126 Jy
! Component: 100  -  total flux cleaned = -0.000645096 Jy
! Component: 150  -  total flux cleaned = -0.00070023 Jy
! Component: 200  -  total flux cleaned = -0.000700296 Jy
! Component: 250  -  total flux cleaned = -0.000699797 Jy
! Component: 300  -  total flux cleaned = -0.000667522 Jy
! Component: 350  -  total flux cleaned = -0.000667089 Jy
! Component: 400  -  total flux cleaned = -0.000652091 Jy
! Component: 450  -  total flux cleaned = -0.00063832 Jy
! Component: 500  -  total flux cleaned = -0.000638286 Jy
! Component: 550  -  total flux cleaned = -0.000571898 Jy
! Component: 600  -  total flux cleaned = -0.000532939 Jy
! Component: 650  -  total flux cleaned = -0.000494767 Jy
! Component: 700  -  total flux cleaned = -0.000433272 Jy
! Component: 750  -  total flux cleaned = -0.000421373 Jy
! Component: 800  -  total flux cleaned = -0.000362986 Jy
! Component: 850  -  total flux cleaned = -0.000362944 Jy
! Component: 900  -  total flux cleaned = -0.000317961 Jy
! Component: 950  -  total flux cleaned = -0.000285145 Jy
! Component: 1000  -  total flux cleaned = -0.000306819 Jy
! Component: 1050  -  total flux cleaned = -0.000359718 Jy
! Component: 1100  -  total flux cleaned = -0.000380619 Jy
! Component: 1150  -  total flux cleaned = -0.00038083 Jy
! Component: 1200  -  total flux cleaned = -0.000421516 Jy
! Component: 1250  -  total flux cleaned = -0.00048135 Jy
! Component: 1300  -  total flux cleaned = -0.000510668 Jy
! Component: 1350  -  total flux cleaned = -0.000510592 Jy
! Component: 1400  -  total flux cleaned = -0.000520181 Jy
! Component: 1450  -  total flux cleaned = -0.000520228 Jy
! Component: 1500  -  total flux cleaned = -0.000510855 Jy
! Component: 1550  -  total flux cleaned = -0.000510894 Jy
! Component: 1600  -  total flux cleaned = -0.000501622 Jy
! Component: 1650  -  total flux cleaned = -0.000474509 Jy
! Component: 1700  -  total flux cleaned = -0.000465572 Jy
! Component: 1750  -  total flux cleaned = -0.000465509 Jy
! Component: 1800  -  total flux cleaned = -0.000439081 Jy
! Component: 1850  -  total flux cleaned = -0.000430349 Jy
! Component: 1900  -  total flux cleaned = -0.000413015 Jy
! Component: 1950  -  total flux cleaned = -0.000387218 Jy
! Component: 2000  -  total flux cleaned = -0.000378722 Jy
! Component: 2050  -  total flux cleaned = -0.000361735 Jy
! Component: 2100  -  total flux cleaned = -0.00034482 Jy
! Component: 2150  -  total flux cleaned = -0.000344848 Jy
! Component: 2200  -  total flux cleaned = -0.000319764 Jy
! Component: 2250  -  total flux cleaned = -0.000311448 Jy
! Component: 2300  -  total flux cleaned = -0.00031149 Jy
! Component: 2350  -  total flux cleaned = -0.000311434 Jy
! Component: 2400  -  total flux cleaned = -0.000319713 Jy
! Component: 2450  -  total flux cleaned = -0.000311498 Jy
! Component: 2500  -  total flux cleaned = -0.000311523 Jy
! Component: 2550  -  total flux cleaned = -0.000319723 Jy
! Component: 2600  -  total flux cleaned = -0.000319704 Jy
! Component: 2650  -  total flux cleaned = -0.000319725 Jy
! Component: 2700  -  total flux cleaned = -0.000311532 Jy
! Component: 2750  -  total flux cleaned = -0.000319615 Jy
! Component: 2800  -  total flux cleaned = -0.000327766 Jy
! Component: 2850  -  total flux cleaned = -0.000327788 Jy
! Component: 2900  -  total flux cleaned = -0.000327761 Jy
! Component: 2950  -  total flux cleaned = -0.000335881 Jy
! Component: 3000  -  total flux cleaned = -0.000319571 Jy
! Component: 3050  -  total flux cleaned = -0.000327668 Jy
! Component: 3100  -  total flux cleaned = -0.000335849 Jy
! Component: 3150  -  total flux cleaned = -0.000327707 Jy
! Component: 3200  -  total flux cleaned = -0.000344095 Jy
! Component: 3250  -  total flux cleaned = -0.000344075 Jy
! Component: 3300  -  total flux cleaned = -0.000344043 Jy
! Component: 3350  -  total flux cleaned = -0.000360543 Jy
! Component: 3400  -  total flux cleaned = -0.000352255 Jy
! Component: 3450  -  total flux cleaned = -0.000352302 Jy
! Component: 3500  -  total flux cleaned = -0.00038553 Jy
! Component: 3550  -  total flux cleaned = -0.000410545 Jy
! Component: 3600  -  total flux cleaned = -0.000444114 Jy
! Component: 3650  -  total flux cleaned = -0.000452538 Jy
! Component: 3700  -  total flux cleaned = -0.000486388 Jy
! Component: 3750  -  total flux cleaned = -0.000494925 Jy
! Component: 3800  -  total flux cleaned = -0.00052048 Jy
! Component: 3850  -  total flux cleaned = -0.000537628 Jy
! Component: 3900  -  total flux cleaned = -0.000563383 Jy
! Component: 3950  -  total flux cleaned = -0.000580665 Jy
! Component: 4000  -  total flux cleaned = -0.000598158 Jy
! Component: 4050  -  total flux cleaned = -0.000598106 Jy
! Total flux subtracted in 4096 components = -0.000642028 Jy
! Clean residual min=-0.000504 max=0.000546 Jy/beam
! Clean residual mean=-0.000001 rms=0.000139 Jy/beam
! Combined flux in latest and established models = 0.0243919 Jy
keep
! Adding 222 model components to the UV plane model.
! The established model now contains 279 components and 0.0243919 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bp192a0_uvs/J0037-0533_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.136 x 2.921 at -11.5 degrees (North through East)
! Clean map  min=-0.0011507  max=0.02131 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp192a0_uvs/J0037-0533_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.02131 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00015001 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.11182 2.11182 4.22364 8.44728 16.8946 33.7891 67.5783
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.021 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  142.057 
quit
! Quitting program
! Log file /scr/pima/bp192a0_uvs/J0037-0533_X_uvs.log closed on Fri Aug 21 06:51:02 2015