! Started logfile: /scr/pima/bp192a0_uvs/J0037-0533_C_uvs.log on Fri Aug 21 07:23:24 2015
obs /scr/pima/bp192a0_uvs/J0037-0533_C_uva.fits
! Reading UV FITS file: /scr/pima/bp192a0_uvs/J0037-0533_C_uva.fits
! AN table 1: 20 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.848889 visibilities/baseline/integration-bin.
! Found source: J0037-0533
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 6112 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp192a0_uvs/J0037-0533_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.001668Jy  sigma=22.719341
! Fit after  self-cal, rms=0.978803Jy  sigma=22.347114
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.545 mas, bmaj=3.702 mas, bpa=-3.562 degrees
! Estimated noise=0.588277 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0147315 Jy
! Component: 100  -  total flux cleaned = 0.0179574 Jy
! Total flux subtracted in 100 components = 0.0179574 Jy
! Clean residual min=-0.001795 max=0.002030 Jy/beam
! Clean residual mean=0.000004 rms=0.000465 Jy/beam
! Combined flux in latest and established models = 0.0179574 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.0179574 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.059331Jy  sigma=0.732463
! Fit after  self-cal, rms=0.058135Jy  sigma=0.678206
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0038559 Jy
! Component: 100  -  total flux cleaned = 0.00495325 Jy
! Total flux subtracted in 100 components = 0.00495325 Jy
! Clean residual min=-0.002140 max=0.002078 Jy/beam
! Clean residual mean=0.000003 rms=0.000486 Jy/beam
! Combined flux in latest and established models = 0.0229107 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 12 components and 0.0229107 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.057598Jy  sigma=0.674341
! Fit after  self-cal, rms=0.057590Jy  sigma=0.674094
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.826 mas, bmaj=4.222 mas, bpa=-4.544 degrees
! Estimated noise=0.424226 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000410867 Jy
! Component: 100  -  total flux cleaned = -0.000550653 Jy
! Component: 150  -  total flux cleaned = -0.000680614 Jy
! Component: 200  -  total flux cleaned = -0.000790415 Jy
! Total flux subtracted in 200 components = -0.000790415 Jy
! Clean residual min=-0.001377 max=0.001419 Jy/beam
! Clean residual mean=0.000004 rms=0.000370 Jy/beam
! Combined flux in latest and established models = 0.0221203 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 26 components and 0.0221203 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.057558Jy  sigma=0.673702
! Fit after  self-cal, rms=0.057559Jy  sigma=0.673655
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.826 x 4.222 at -4.544 degrees (North through East)
! Clean map  min=-0.0013173  max=0.022938 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        0.93     HN        1.08     KP        1.04     
!   LA        1.05     MK        1.07     NL        0.98     OV        1.09     
!   PT        1.00     SC        1.08     
! 
! 
! Fit before self-cal, rms=0.057559Jy  sigma=0.673655
! Fit after  self-cal, rms=0.053809Jy  sigma=0.673173
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.829 mas, bmaj=4.234 mas, bpa=-4.538 degrees
! Estimated noise=0.427994 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.90918e-05 Jy
! Component: 100  -  total flux cleaned = -0.00011713 Jy
! Component: 150  -  total flux cleaned = -0.00020652 Jy
! Component: 200  -  total flux cleaned = -0.000266586 Jy
! Total flux subtracted in 200 components = -0.000266586 Jy
! Clean residual min=-0.001421 max=0.001343 Jy/beam
! Clean residual mean=0.000004 rms=0.000367 Jy/beam
! Combined flux in latest and established models = 0.0218537 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 29 components and 0.0218537 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.053789Jy  sigma=0.673163
! Fit after  self-cal, rms=0.053775Jy  sigma=0.673017
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.053775Jy  sigma=0.673017
! Fit after  self-cal, rms=0.053888Jy  sigma=0.672634
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.833 mas, bmaj=4.244 mas, bpa=-4.507 degrees
! Estimated noise=0.43213 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000111769 Jy
! Component: 100  -  total flux cleaned = 4.93921e-05 Jy
! Component: 150  -  total flux cleaned = 2.01746e-06 Jy
! Component: 200  -  total flux cleaned = -4.16394e-05 Jy
! Total flux subtracted in 200 components = -4.16394e-05 Jy
! Clean residual min=-0.001409 max=0.001388 Jy/beam
! Clean residual mean=0.000004 rms=0.000360 Jy/beam
! Combined flux in latest and established models = 0.021812 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 31 components and 0.021812 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.053869Jy  sigma=0.672737
! Fit after  self-cal, rms=0.053869Jy  sigma=0.672691
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.95523e-05 Jy
! Component: 100  -  total flux cleaned = -0.000102557 Jy
! Component: 150  -  total flux cleaned = -0.000133346 Jy
! Component: 200  -  total flux cleaned = -0.000155188 Jy
! Total flux subtracted in 200 components = -0.000155188 Jy
! Clean residual min=-0.001405 max=0.001383 Jy/beam
! Clean residual mean=0.000004 rms=0.000361 Jy/beam
! Combined flux in latest and established models = 0.0216569 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 35 components and 0.0216569 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.053864Jy  sigma=0.672646
! Fit after  self-cal, rms=0.053863Jy  sigma=0.672643
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.053863Jy  sigma=0.672643
! Fit after  self-cal, rms=0.054030Jy  sigma=0.672178
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.835 mas, bmaj=4.234 mas, bpa=-4.373 degrees
! Estimated noise=0.438757 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000235599 Jy
! Component: 100  -  total flux cleaned = 0.000245739 Jy
! Component: 150  -  total flux cleaned = 0.000238145 Jy
! Component: 200  -  total flux cleaned = 0.000232062 Jy
! Total flux subtracted in 200 components = 0.000232062 Jy
! Clean residual min=-0.001382 max=0.001393 Jy/beam
! Clean residual mean=0.000004 rms=0.000359 Jy/beam
! Combined flux in latest and established models = 0.0218889 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 42 components and 0.0218889 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.054001Jy  sigma=0.672418
! Fit after  self-cal, rms=0.053998Jy  sigma=0.672383
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.20573e-05 Jy
! Component: 100  -  total flux cleaned = -4.92145e-05 Jy
! Component: 150  -  total flux cleaned = -6.55529e-05 Jy
! Component: 200  -  total flux cleaned = -7.60341e-05 Jy
! Total flux subtracted in 200 components = -7.60341e-05 Jy
! Clean residual min=-0.001379 max=0.001397 Jy/beam
! Clean residual mean=0.000004 rms=0.000359 Jy/beam
! Combined flux in latest and established models = 0.0218129 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 44 components and 0.0218129 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.053996Jy  sigma=0.672360
! Fit after  self-cal, rms=0.053995Jy  sigma=0.672358
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.053995Jy  sigma=0.672358
! Fit after  self-cal, rms=0.054121Jy  sigma=0.672326
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.785 mas, bmaj=6.793 mas, bpa=2.071 degrees
! Estimated noise=0.538242 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.08833e-05 Jy
! Component: 100  -  total flux cleaned = 6.69028e-05 Jy
! Component: 150  -  total flux cleaned = 6.29819e-05 Jy
! Component: 200  -  total flux cleaned = 5.55907e-05 Jy
! Total flux subtracted in 200 components = 5.55907e-05 Jy
! Clean residual min=-0.001446 max=0.001568 Jy/beam
! Clean residual mean=0.000007 rms=0.000453 Jy/beam
! Combined flux in latest and established models = 0.0218685 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 47 components and 0.0218685 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.054113Jy  sigma=0.672400
! Fit after  self-cal, rms=0.054113Jy  sigma=0.672396
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.80839e-05 Jy
! Component: 100  -  total flux cleaned = -2.4563e-05 Jy
! Component: 150  -  total flux cleaned = -2.74623e-05 Jy
! Component: 200  -  total flux cleaned = -3.04082e-05 Jy
! Total flux subtracted in 200 components = -3.04082e-05 Jy
! Clean residual min=-0.001449 max=0.001564 Jy/beam
! Clean residual mean=0.000007 rms=0.000453 Jy/beam
! Combined flux in latest and established models = 0.0218381 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 50 components and 0.0218381 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.054109Jy  sigma=0.672447
! Fit after  self-cal, rms=0.054109Jy  sigma=0.672444
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.836 mas, bmaj=4.232 mas, bpa=-4.3 degrees
! Estimated noise=0.441776 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.836 x 4.232 at -4.3 degrees (North through East)
! Clean map  min=-0.0013344  max=0.024336 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.549 mas, bmaj=3.703 mas, bpa=-3.395 degrees
! Estimated noise=0.616198 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0186589 Jy
! Component: 100  -  total flux cleaned = 0.0228638 Jy
! Component: 150  -  total flux cleaned = 0.0234204 Jy
! Component: 200  -  total flux cleaned = 0.0235902 Jy
! Total flux subtracted in 200 components = 0.0235902 Jy
! Clean residual min=-0.002312 max=0.002139 Jy/beam
! Clean residual mean=0.000002 rms=0.000505 Jy/beam
! Combined flux in latest and established models = 0.0235902 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.0235902 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.836 mas, bmaj=4.232 mas, bpa=-4.3 degrees
! Estimated noise=0.441776 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000784991 Jy
! Component: 100  -  total flux cleaned = -0.000927799 Jy
! Component: 150  -  total flux cleaned = -0.00107811 Jy
! Component: 200  -  total flux cleaned = -0.00117827 Jy
! Total flux subtracted in 200 components = -0.00117827 Jy
! Clean residual min=-0.001397 max=0.001381 Jy/beam
! Clean residual mean=0.000004 rms=0.000364 Jy/beam
! Combined flux in latest and established models = 0.022412 Jy
! Adding 14 model components to the UV plane model.
! The established model now contains 26 components and 0.022412 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.785 mas, bmaj=6.793 mas, bpa=2.071 degrees
! Estimated noise=0.538242 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000314154 Jy
! Component: 100  -  total flux cleaned = -0.000363492 Jy
! Component: 150  -  total flux cleaned = -0.000386431 Jy
! Component: 200  -  total flux cleaned = -0.000406192 Jy
! Total flux subtracted in 200 components = -0.000406192 Jy
! Clean residual min=-0.001449 max=0.001569 Jy/beam
! Clean residual mean=0.000007 rms=0.000455 Jy/beam
! Combined flux in latest and established models = 0.0220058 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.7337e-05 Jy
! Component: 100  -  total flux cleaned = -2.86747e-05 Jy
! Component: 150  -  total flux cleaned = -4.21315e-05 Jy
! Component: 200  -  total flux cleaned = -5.45265e-05 Jy
! Total flux subtracted in 200 components = -5.45265e-05 Jy
! Clean residual min=-0.001449 max=0.001567 Jy/beam
! Clean residual mean=0.000007 rms=0.000454 Jy/beam
! Combined flux in latest and established models = 0.0219512 Jy
! Adding 14 model components to the UV plane model.
! The established model now contains 35 components and 0.0219512 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.836 mas, bmaj=4.232 mas, bpa=-4.3 degrees
! Estimated noise=0.441776 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000110167 Jy
! Component: 100  -  total flux cleaned = -0.000110287 Jy
! Component: 150  -  total flux cleaned = -0.000101264 Jy
! Component: 200  -  total flux cleaned = -9.27901e-05 Jy
! Total flux subtracted in 200 components = -9.27901e-05 Jy
! Clean residual min=-0.001393 max=0.001356 Jy/beam
! Clean residual mean=0.000004 rms=0.000361 Jy/beam
! Combined flux in latest and established models = 0.0218585 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 45 components and 0.0218585 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.054114Jy  sigma=0.672513
! Fit after  self-cal, rms=0.054112Jy  sigma=0.672496
wmodel /scr/pima/bp192a0_uvs/J0037-0533_C_map.mod
! Writing 45 model components to file: /scr/pima/bp192a0_uvs/J0037-0533_C_map.mod
wobs /scr/pima/bp192a0_uvs/J0037-0533_C_uvs.fits
! Writing UV FITS file: /scr/pima/bp192a0_uvs/J0037-0533_C_uvs.fits
wwins /scr/pima/bp192a0_uvs/J0037-0533_C_map.win
! wwins: Wrote 1 windows to /scr/pima/bp192a0_uvs/J0037-0533_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000212793 Jy
! Component: 100  -  total flux cleaned = -0.000286134 Jy
! Component: 150  -  total flux cleaned = -0.000264358 Jy
! Component: 200  -  total flux cleaned = -0.000177636 Jy
! Component: 250  -  total flux cleaned = -3.22738e-05 Jy
! Component: 300  -  total flux cleaned = 6.80056e-05 Jy
! Component: 350  -  total flux cleaned = 0.000126976 Jy
! Component: 400  -  total flux cleaned = 0.000165267 Jy
! Component: 450  -  total flux cleaned = 0.000258476 Jy
! Component: 500  -  total flux cleaned = 0.000295409 Jy
! Component: 550  -  total flux cleaned = 0.000437477 Jy
! Component: 600  -  total flux cleaned = 0.000506996 Jy
! Component: 650  -  total flux cleaned = 0.000659864 Jy
! Component: 700  -  total flux cleaned = 0.000792306 Jy
! Component: 750  -  total flux cleaned = 0.000922444 Jy
! Component: 800  -  total flux cleaned = 0.00105002 Jy
! Component: 850  -  total flux cleaned = 0.00119114 Jy
! Component: 900  -  total flux cleaned = 0.00132946 Jy
! Component: 950  -  total flux cleaned = 0.0014655 Jy
! Component: 1000  -  total flux cleaned = 0.00158403 Jy
! Component: 1050  -  total flux cleaned = 0.00168589 Jy
! Component: 1100  -  total flux cleaned = 0.0017859 Jy
! Component: 1150  -  total flux cleaned = 0.00189858 Jy
! Component: 1200  -  total flux cleaned = 0.00198156 Jy
! Component: 1250  -  total flux cleaned = 0.00198164 Jy
! Component: 1300  -  total flux cleaned = 0.00207605 Jy
! Component: 1350  -  total flux cleaned = 0.00214258 Jy
! Component: 1400  -  total flux cleaned = 0.0021948 Jy
! Component: 1450  -  total flux cleaned = 0.00227228 Jy
! Component: 1500  -  total flux cleaned = 0.00231049 Jy
! Component: 1550  -  total flux cleaned = 0.00237353 Jy
! Component: 1600  -  total flux cleaned = 0.00244816 Jy
! Component: 1650  -  total flux cleaned = 0.00250964 Jy
! Component: 1700  -  total flux cleaned = 0.00259464 Jy
! Component: 1750  -  total flux cleaned = 0.00266661 Jy
! Component: 1800  -  total flux cleaned = 0.00273786 Jy
! Component: 1850  -  total flux cleaned = 0.00283153 Jy
! Component: 1900  -  total flux cleaned = 0.002878 Jy
! Component: 1950  -  total flux cleaned = 0.0029929 Jy
! Component: 2000  -  total flux cleaned = 0.00307233 Jy
! Component: 2050  -  total flux cleaned = 0.00313971 Jy
! Component: 2100  -  total flux cleaned = 0.00318397 Jy
! Component: 2150  -  total flux cleaned = 0.00324995 Jy
! Component: 2200  -  total flux cleaned = 0.00331529 Jy
! Component: 2250  -  total flux cleaned = 0.00333699 Jy
! Component: 2300  -  total flux cleaned = 0.00339049 Jy
! Component: 2350  -  total flux cleaned = 0.00346445 Jy
! Component: 2400  -  total flux cleaned = 0.0034645 Jy
! Component: 2450  -  total flux cleaned = 0.00350598 Jy
! Component: 2500  -  total flux cleaned = 0.00355737 Jy
! Component: 2550  -  total flux cleaned = 0.00357778 Jy
! Component: 2600  -  total flux cleaned = 0.00359795 Jy
! Component: 2650  -  total flux cleaned = 0.00361799 Jy
! Component: 2700  -  total flux cleaned = 0.0036279 Jy
! Component: 2750  -  total flux cleaned = 0.00365747 Jy
! Component: 2800  -  total flux cleaned = 0.00363798 Jy
! Component: 2850  -  total flux cleaned = 0.00368661 Jy
! Component: 2900  -  total flux cleaned = 0.00369629 Jy
! Component: 2950  -  total flux cleaned = 0.00366771 Jy
! Component: 3000  -  total flux cleaned = 0.00365816 Jy
! Component: 3050  -  total flux cleaned = 0.00362982 Jy
! Component: 3100  -  total flux cleaned = 0.00363907 Jy
! Component: 3150  -  total flux cleaned = 0.00362037 Jy
! Component: 3200  -  total flux cleaned = 0.0035558 Jy
! Component: 3250  -  total flux cleaned = 0.00355578 Jy
! Component: 3300  -  total flux cleaned = 0.0035194 Jy
! Component: 3350  -  total flux cleaned = 0.00353744 Jy
! Component: 3400  -  total flux cleaned = 0.00351046 Jy
! Component: 3450  -  total flux cleaned = 0.00346576 Jy
! Component: 3500  -  total flux cleaned = 0.00349243 Jy
! Component: 3550  -  total flux cleaned = 0.00346593 Jy
! Component: 3600  -  total flux cleaned = 0.00343959 Jy
! Component: 3650  -  total flux cleaned = 0.00341343 Jy
! Component: 3700  -  total flux cleaned = 0.00337874 Jy
! Component: 3750  -  total flux cleaned = 0.00338739 Jy
! Component: 3800  -  total flux cleaned = 0.00335319 Jy
! Component: 3850  -  total flux cleaned = 0.00336163 Jy
! Component: 3900  -  total flux cleaned = 0.0033447 Jy
! Component: 3950  -  total flux cleaned = 0.00333625 Jy
! Component: 4000  -  total flux cleaned = 0.00330272 Jy
! Component: 4050  -  total flux cleaned = 0.00329442 Jy
! Total flux subtracted in 4096 components = 0.00327784 Jy
! Clean residual min=-0.000512 max=0.000536 Jy/beam
! Clean residual mean=0.000001 rms=0.000151 Jy/beam
! Combined flux in latest and established models = 0.0251363 Jy
keep
! Adding 290 model components to the UV plane model.
! The established model now contains 335 components and 0.0251363 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bp192a0_uvs/J0037-0533_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.836 x 4.232 at -4.3 degrees (North through East)
! Clean map  min=-0.00093821  max=0.024347 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp192a0_uvs/J0037-0533_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0243474 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000147631 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.81906 1.81906 3.63813 7.27625 14.5525 29.105 58.21
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.024 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  164.92 
quit
! Quitting program
! Log file /scr/pima/bp192a0_uvs/J0037-0533_C_uvs.log closed on Fri Aug 21 07:23:28 2015