! Started logfile: J2212+2759_X_2015_03_17_pus_uvs.log on Sat Dec 31 19:12:50 2016 obs J2212+2759_X_2015_03_17_pus_uva.fits ! Reading UV FITS file: J2212+2759_X_2015_03_17_pus_uva.fits ! AN table 1: 122 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.975956 visibilities/baseline/integration-bin. ! Found source: J2212+2759 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 64296 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J2212+2759_X_2015_03_17_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.938012Jy sigma=0.010814 ! Fit after self-cal, rms=0.908367Jy sigma=0.010440 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8636 mas, bmaj=1.281 mas, bpa=-2.022 degrees ! Estimated noise=624.472 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0708077 Jy ! Component: 100 - total flux cleaned = 0.0880434 Jy ! Total flux subtracted in 100 components = 0.0880434 Jy ! Clean residual min=-0.003766 max=0.007007 Jy/beam ! Clean residual mean=-0.000030 rms=0.001054 Jy/beam ! Combined flux in latest and established models = 0.0880434 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0880434 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074364Jy sigma=0.000799 ! Fit after self-cal, rms=0.074359Jy sigma=0.000798 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00757621 Jy ! Component: 100 - total flux cleaned = 0.011257 Jy ! Total flux subtracted in 100 components = 0.011257 Jy ! Clean residual min=-0.003487 max=0.003628 Jy/beam ! Clean residual mean=-0.000005 rms=0.000882 Jy/beam ! Combined flux in latest and established models = 0.0993004 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 11 components and 0.0993004 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073437Jy sigma=0.000787 ! Fit after self-cal, rms=0.073437Jy sigma=0.000787 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.066 mas, bmaj=1.609 mas, bpa=-1.243 degrees ! Estimated noise=246.285 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0032666 Jy ! Component: 100 - total flux cleaned = 0.00491848 Jy ! Component: 150 - total flux cleaned = 0.00591819 Jy ! Component: 200 - total flux cleaned = 0.00645634 Jy ! Total flux subtracted in 200 components = 0.00645634 Jy ! Clean residual min=-0.004612 max=0.003219 Jy/beam ! Clean residual mean=-0.000003 rms=0.000901 Jy/beam ! Combined flux in latest and established models = 0.105757 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 23 components and 0.105757 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073280Jy sigma=0.000786 ! Fit after self-cal, rms=0.073289Jy sigma=0.000786 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.14 HN 1.04 KP 0.92 ! LA 1.04 MK 0.93 NL 0.98 OV 0.98 ! PT 1.03 SC 1.17 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.18 HN 1.06 KP 0.87 ! LA 1.02 MK 0.94 NL 1.00 OV 1.00 ! PT 0.98 SC 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.14 HN 1.06 KP 0.83 ! LA 1.04 MK 0.94 NL 0.97 OV 0.97 ! PT 0.98 SC 1.07 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.12 HN 1.07 KP 0.81 ! LA 1.06 MK 0.94 NL 0.99 OV 0.96 ! PT 0.99 SC 1.12 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.15 HN 1.02 KP 0.75 ! LA 1.04 MK 0.94 NL 1.00 OV 1.01 ! PT 0.96 SC 1.09 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.15 HN 1.06 KP 0.75 ! LA 1.04 MK 0.96 NL 1.01 OV 1.03 ! PT 0.96 SC 1.11 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.16 HN 1.12 KP 0.73 ! LA 1.06 MK 0.93 NL 1.02 OV 1.05 ! PT 0.94 SC 1.10 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.19 HN 1.13 KP 0.74 ! LA 1.03 MK 0.95 NL 1.00 OV 1.02 ! PT 1.00 SC 1.08 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.14 HN 1.13 KP 0.77 ! LA 1.06 MK 0.91 NL 1.03 OV 1.04 ! PT 1.00 SC 1.00 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.13 HN 1.09 KP 0.80 ! LA 1.04 MK 0.95 NL 1.03 OV 1.02 ! PT 0.99 SC 1.08 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.16 HN 1.09 KP 0.82 ! LA 1.07 MK 0.92 NL 1.04 OV 1.02 ! PT 1.00 SC 1.06 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.15 HN 1.06 KP 0.87 ! LA 1.05 MK 0.93 NL 1.03 OV 1.02 ! PT 0.98 SC 1.08 ! ! ! Fit before self-cal, rms=0.073289Jy sigma=0.000786 ! Fit after self-cal, rms=0.072833Jy sigma=0.000773 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.067 mas, bmaj=1.62 mas, bpa=-3.251 degrees ! Estimated noise=246.157 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.8, -8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00263087 Jy ! Component: 100 - total flux cleaned = 0.00350999 Jy ! Component: 150 - total flux cleaned = 0.00414472 Jy ! Component: 200 - total flux cleaned = 0.0046089 Jy ! Total flux subtracted in 200 components = 0.0046089 Jy ! Clean residual min=-0.001340 max=0.002291 Jy/beam ! Clean residual mean=-0.000001 rms=0.000363 Jy/beam ! Combined flux in latest and established models = 0.110366 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 51 components and 0.110366 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072736Jy sigma=0.000772 ! Fit after self-cal, rms=0.072778Jy sigma=0.000771 ! Inverting map ! Added new window around map position (-0.4, -3.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00208827 Jy ! Component: 100 - total flux cleaned = 0.0028596 Jy ! Component: 150 - total flux cleaned = 0.00338305 Jy ! Component: 200 - total flux cleaned = 0.00375905 Jy ! Total flux subtracted in 200 components = 0.00375905 Jy ! Clean residual min=-0.001273 max=0.001441 Jy/beam ! Clean residual mean=0.000009 rms=0.000295 Jy/beam ! Combined flux in latest and established models = 0.114125 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 77 components and 0.114125 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072715Jy sigma=0.000770 ! Fit after self-cal, rms=0.072710Jy sigma=0.000770 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072710Jy sigma=0.000770 ! Fit after self-cal, rms=0.073374Jy sigma=0.000769 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.068 mas, bmaj=1.618 mas, bpa=-2.312 degrees ! Estimated noise=245.883 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000850922 Jy ! Component: 100 - total flux cleaned = 0.00142234 Jy ! Component: 150 - total flux cleaned = 0.00176582 Jy ! Component: 200 - total flux cleaned = 0.00194544 Jy ! Total flux subtracted in 200 components = 0.00194544 Jy ! Clean residual min=-0.000787 max=0.000743 Jy/beam ! Clean residual mean=0.000006 rms=0.000195 Jy/beam ! Combined flux in latest and established models = 0.11607 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 98 components and 0.11607 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073361Jy sigma=0.000769 ! Fit after self-cal, rms=0.073376Jy sigma=0.000769 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00030526 Jy ! Component: 100 - total flux cleaned = 0.000438113 Jy ! Component: 150 - total flux cleaned = 0.000552626 Jy ! Component: 200 - total flux cleaned = 0.000613748 Jy ! Total flux subtracted in 200 components = 0.000613748 Jy ! Clean residual min=-0.000778 max=0.000734 Jy/beam ! Clean residual mean=0.000008 rms=0.000190 Jy/beam ! Combined flux in latest and established models = 0.116684 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 108 components and 0.116684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073372Jy sigma=0.000769 ! Fit after self-cal, rms=0.073370Jy sigma=0.000769 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073370Jy sigma=0.000769 ! Fit after self-cal, rms=0.073404Jy sigma=0.000769 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.068 mas, bmaj=1.617 mas, bpa=-2.22 degrees ! Estimated noise=245.599 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00035765 Jy ! Component: 100 - total flux cleaned = 0.000475586 Jy ! Component: 150 - total flux cleaned = 0.00051692 Jy ! Component: 200 - total flux cleaned = 0.00054552 Jy ! Total flux subtracted in 200 components = 0.00054552 Jy ! Clean residual min=-0.000743 max=0.000712 Jy/beam ! Clean residual mean=0.000007 rms=0.000181 Jy/beam ! Combined flux in latest and established models = 0.117229 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 120 components and 0.117229 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073400Jy sigma=0.000769 ! Fit after self-cal, rms=0.073402Jy sigma=0.000769 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000152871 Jy ! Component: 100 - total flux cleaned = 0.000178656 Jy ! Component: 150 - total flux cleaned = 0.000210351 Jy ! Component: 200 - total flux cleaned = 0.000225086 Jy ! Total flux subtracted in 200 components = 0.000225086 Jy ! Clean residual min=-0.000736 max=0.000705 Jy/beam ! Clean residual mean=0.000008 rms=0.000179 Jy/beam ! Combined flux in latest and established models = 0.117455 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 128 components and 0.117455 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073400Jy sigma=0.000769 ! Fit after self-cal, rms=0.073399Jy sigma=0.000769 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073399Jy sigma=0.000769 ! Fit after self-cal, rms=0.073399Jy sigma=0.000769 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.171 mas, bmaj=2.737 mas, bpa=8.081e-05 degrees ! Estimated noise=291.071 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.80493e-05 Jy ! Component: 100 - total flux cleaned = 7.71136e-05 Jy ! Component: 150 - total flux cleaned = 0.000109616 Jy ! Component: 200 - total flux cleaned = 0.000144604 Jy ! Total flux subtracted in 200 components = 0.000144604 Jy ! Clean residual min=-0.000749 max=0.000848 Jy/beam ! Clean residual mean=0.000013 rms=0.000222 Jy/beam ! Combined flux in latest and established models = 0.117599 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 131 components and 0.117599 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073397Jy sigma=0.000769 ! Fit after self-cal, rms=0.073397Jy sigma=0.000769 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.90653e-05 Jy ! Component: 100 - total flux cleaned = -1.06367e-05 Jy ! Component: 150 - total flux cleaned = -1.04144e-05 Jy ! Component: 200 - total flux cleaned = 1.16534e-06 Jy ! Total flux subtracted in 200 components = 1.16534e-06 Jy ! Clean residual min=-0.000754 max=0.000829 Jy/beam ! Clean residual mean=0.000013 rms=0.000220 Jy/beam ! Combined flux in latest and established models = 0.1176 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 138 components and 0.1176 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073397Jy sigma=0.000769 ! Fit after self-cal, rms=0.073396Jy sigma=0.000769 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.068 mas, bmaj=1.617 mas, bpa=-2.185 degrees ! Estimated noise=245.317 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.068 x 1.617 at -2.185 degrees (North through East) ! Clean map min=-0.00064843 max=0.092235 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8628 mas, bmaj=1.281 mas, bpa=-3.246 degrees ! Estimated noise=627.367 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0709302 Jy ! Component: 100 - total flux cleaned = 0.0889075 Jy ! Component: 150 - total flux cleaned = 0.0964949 Jy ! Component: 200 - total flux cleaned = 0.10047 Jy ! Total flux subtracted in 200 components = 0.10047 Jy ! Clean residual min=-0.001915 max=0.002473 Jy/beam ! Clean residual mean=-0.000013 rms=0.000524 Jy/beam ! Combined flux in latest and established models = 0.10047 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.10047 Jy ! Inverting map and beam ! Estimated beam: bmin=1.068 mas, bmaj=1.617 mas, bpa=-2.185 degrees ! Estimated noise=245.317 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00324563 Jy ! Component: 100 - total flux cleaned = 0.00560894 Jy ! Component: 150 - total flux cleaned = 0.00747166 Jy ! Component: 200 - total flux cleaned = 0.00897302 Jy ! Total flux subtracted in 200 components = 0.00897302 Jy ! Clean residual min=-0.001049 max=0.000907 Jy/beam ! Clean residual mean=-0.000007 rms=0.000262 Jy/beam ! Combined flux in latest and established models = 0.109443 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 61 components and 0.109443 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.171 mas, bmaj=2.737 mas, bpa=8.081e-05 degrees ! Estimated noise=291.071 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00196255 Jy ! Component: 100 - total flux cleaned = 0.00335243 Jy ! Component: 150 - total flux cleaned = 0.00440889 Jy ! Component: 200 - total flux cleaned = 0.00522879 Jy ! Total flux subtracted in 200 components = 0.00522879 Jy ! Clean residual min=-0.000887 max=0.000746 Jy/beam ! Clean residual mean=0.000002 rms=0.000245 Jy/beam ! Combined flux in latest and established models = 0.114672 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000642888 Jy ! Component: 100 - total flux cleaned = 0.00114959 Jy ! Component: 150 - total flux cleaned = 0.00155055 Jy ! Component: 200 - total flux cleaned = 0.00186816 Jy ! Total flux subtracted in 200 components = 0.00186816 Jy ! Clean residual min=-0.000809 max=0.000780 Jy/beam ! Clean residual mean=0.000008 rms=0.000219 Jy/beam ! Combined flux in latest and established models = 0.11654 Jy ! Adding 75 model components to the UV plane model. ! The established model now contains 128 components and 0.11654 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.068 mas, bmaj=1.617 mas, bpa=-2.185 degrees ! Estimated noise=245.317 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000313344 Jy ! Component: 100 - total flux cleaned = 0.000409605 Jy ! Component: 150 - total flux cleaned = 0.000507983 Jy ! Component: 200 - total flux cleaned = 0.000579 Jy ! Total flux subtracted in 200 components = 0.000579 Jy ! Clean residual min=-0.000734 max=0.000697 Jy/beam ! Clean residual mean=0.000006 rms=0.000178 Jy/beam ! Combined flux in latest and established models = 0.117119 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 139 components and 0.117119 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073399Jy sigma=0.000769 ! Fit after self-cal, rms=0.073394Jy sigma=0.000769 wmodel J2212+2759_X_2015_03_17_pus_map.mod ! Writing 139 model components to file: J2212+2759_X_2015_03_17_pus_map.mod wobs J2212+2759_X_2015_03_17_pus_uvs.fits ! Writing UV FITS file: J2212+2759_X_2015_03_17_pus_uvs.fits wwins J2212+2759_X_2015_03_17_pus_map.win ! wwins: Wrote 3 windows to J2212+2759_X_2015_03_17_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00017294 Jy ! Component: 100 - total flux cleaned = -0.000208727 Jy ! Component: 150 - total flux cleaned = -0.000186431 Jy ! Component: 200 - total flux cleaned = -0.000154784 Jy ! Component: 250 - total flux cleaned = -0.000144688 Jy ! Component: 300 - total flux cleaned = -0.000134915 Jy ! Component: 350 - total flux cleaned = -0.000125289 Jy ! Component: 400 - total flux cleaned = -0.000115892 Jy ! Component: 450 - total flux cleaned = -0.000115844 Jy ! Component: 500 - total flux cleaned = -0.000150257 Jy ! Component: 550 - total flux cleaned = -0.00016712 Jy ! Component: 600 - total flux cleaned = -0.000192269 Jy ! Component: 650 - total flux cleaned = -0.000232965 Jy ! Component: 700 - total flux cleaned = -0.000296368 Jy ! Component: 750 - total flux cleaned = -0.000335185 Jy ! Component: 800 - total flux cleaned = -0.000388821 Jy ! Component: 850 - total flux cleaned = -0.000434052 Jy ! Component: 900 - total flux cleaned = -0.000478481 Jy ! Component: 950 - total flux cleaned = -0.000514867 Jy ! Component: 1000 - total flux cleaned = -0.000550581 Jy ! Component: 1050 - total flux cleaned = -0.000585808 Jy ! Component: 1100 - total flux cleaned = -0.0006205 Jy ! Component: 1150 - total flux cleaned = -0.000647773 Jy ! Component: 1200 - total flux cleaned = -0.000674695 Jy ! Component: 1250 - total flux cleaned = -0.000674718 Jy ! Component: 1300 - total flux cleaned = -0.000700926 Jy ! Component: 1350 - total flux cleaned = -0.000688001 Jy ! Component: 1400 - total flux cleaned = -0.000694415 Jy ! Component: 1450 - total flux cleaned = -0.000688217 Jy ! Component: 1500 - total flux cleaned = -0.000688217 Jy ! Component: 1550 - total flux cleaned = -0.000694341 Jy ! Component: 1600 - total flux cleaned = -0.000688107 Jy ! Component: 1650 - total flux cleaned = -0.000688055 Jy ! Component: 1700 - total flux cleaned = -0.000670089 Jy ! Component: 1750 - total flux cleaned = -0.000676063 Jy ! Component: 1800 - total flux cleaned = -0.000687805 Jy ! Component: 1850 - total flux cleaned = -0.000687816 Jy ! Component: 1900 - total flux cleaned = -0.000670529 Jy ! Component: 1950 - total flux cleaned = -0.000664871 Jy ! Component: 2000 - total flux cleaned = -0.000659234 Jy ! Total flux subtracted in 2048 components = -0.000653596 Jy ! Clean residual min=-0.000279 max=0.000337 Jy/beam ! Clean residual mean=0.000003 rms=0.000106 Jy/beam ! Combined flux in latest and established models = 0.116465 Jy keep ! Adding 159 model components to the UV plane model. ! The established model now contains 298 components and 0.116465 Jy ![Exited script file: muppet] wmap "J2212+2759_X_2015_03_17_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.068 x 1.617 at -2.185 degrees (North through East) ! Clean map min=-0.00056997 max=0.092504 Jy/beam ! Writing clean map to FITS file: J2212+2759_X_2015_03_17_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0925042 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000105866 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.343334 0.343334 0.686668 1.37334 2.74667 5.49335 10.9867 21.9734 43.9468 87.8935 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.092 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.068 x 1.617 at -2.185 degrees (North through East) ! Clean map min=-0.00056997 max=0.092504 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2212+2759_X_2015_03_17_pus_uvs.log closed on Sat Dec 31 19:12:54 2016