! Started logfile: J2210+0857_X_2015_03_17_pus_uvs.log on Sat Dec 31 19:12:32 2016 obs J2210+0857_X_2015_03_17_pus_uva.fits ! Reading UV FITS file: J2210+0857_X_2015_03_17_pus_uva.fits ! AN table 1: 115 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.969855 visibilities/baseline/integration-bin. ! Found source: J2210+0857 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 60228 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J2210+0857_X_2015_03_17_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.966437Jy sigma=0.010680 ! Fit after self-cal, rms=0.936114Jy sigma=0.010349 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7061 mas, bmaj=1.764 mas, bpa=-4.005 degrees ! Estimated noise=416.985 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0482305 Jy ! Component: 100 - total flux cleaned = 0.0654396 Jy ! Total flux subtracted in 100 components = 0.0654396 Jy ! Clean residual min=-0.004570 max=0.014218 Jy/beam ! Clean residual mean=-0.000002 rms=0.001571 Jy/beam ! Combined flux in latest and established models = 0.0654396 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0654396 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082166Jy sigma=0.000847 ! Fit after self-cal, rms=0.081959Jy sigma=0.000845 ! Inverting map ! Added new window around map position (-1.2, -1.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.013748 Jy ! Component: 100 - total flux cleaned = 0.0218166 Jy ! Total flux subtracted in 100 components = 0.0218166 Jy ! Clean residual min=-0.002995 max=0.005102 Jy/beam ! Clean residual mean=-0.000003 rms=0.001012 Jy/beam ! Combined flux in latest and established models = 0.0872562 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 27 components and 0.0872562 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079090Jy sigma=0.000808 ! Fit after self-cal, rms=0.078860Jy sigma=0.000805 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00728358 Jy ! Component: 100 - total flux cleaned = 0.0120183 Jy ! Total flux subtracted in 100 components = 0.0120183 Jy ! Clean residual min=-0.002542 max=0.003378 Jy/beam ! Clean residual mean=-0.000003 rms=0.000776 Jy/beam ! Combined flux in latest and established models = 0.0992745 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 37 components and 0.0992745 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077957Jy sigma=0.000793 ! Fit after self-cal, rms=0.077920Jy sigma=0.000792 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.855 mas, bmaj=1.996 mas, bpa=-3.643 degrees ! Estimated noise=265.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0056798 Jy ! Component: 100 - total flux cleaned = 0.00934053 Jy ! Component: 150 - total flux cleaned = 0.0118292 Jy ! Component: 200 - total flux cleaned = 0.0135758 Jy ! Total flux subtracted in 200 components = 0.0135758 Jy ! Clean residual min=-0.003128 max=0.003184 Jy/beam ! Clean residual mean=-0.000002 rms=0.000797 Jy/beam ! Combined flux in latest and established models = 0.11285 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 60 components and 0.11285 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077470Jy sigma=0.000787 ! Fit after self-cal, rms=0.077459Jy sigma=0.000786 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.21 HN 1.08 KP 0.91 ! LA 1.00 MK 1.07 NL 1.03 OV 0.93 ! PT 1.04 SC 1.04 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.21 HN 1.05 KP 0.85 ! LA 1.04 MK 1.06 NL 1.01 OV 0.98 ! PT 0.96 SC 1.04 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.18 HN 1.09 KP 0.81 ! LA 1.04 MK 1.05 NL 1.01 OV 0.98 ! PT 0.95 SC 1.07 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.14 HN 1.11 KP 0.78 ! LA 1.09 MK 1.03 NL 0.98 OV 0.97 ! PT 0.96 SC 1.04 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.17 HN 1.06 KP 0.73 ! LA 1.02 MK 1.04 NL 1.06 OV 0.98 ! PT 0.98 SC 1.03 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.20 HN 1.07 KP 0.73 ! LA 1.07 MK 1.02 NL 1.01 OV 0.96 ! PT 0.95 SC 1.07 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.15 HN 1.16 KP 0.73 ! LA 1.06 MK 1.02 NL 1.02 OV 1.00 ! PT 0.97 SC 1.07 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.22 HN 1.13 KP 0.72 ! LA 1.05 MK 1.06 NL 1.08 OV 1.02 ! PT 0.94 SC 1.04 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.12 HN 1.13 KP 0.75 ! LA 1.03 MK 0.96 NL 1.08 OV 1.04 ! PT 0.95 SC 1.05 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.20 HN 1.17 KP 0.80 ! LA 1.04 MK 1.02 NL 1.05 OV 1.00 ! PT 0.99 SC 1.00 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.17 HN 1.08 KP 0.82 ! LA 1.06 MK 0.96 NL 1.07 OV 1.01 ! PT 0.98 SC 1.08 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.20 HN 1.06 KP 0.90 ! LA 1.05 MK 0.97 NL 1.07 OV 1.00 ! PT 0.97 SC 1.02 ! ! ! Fit before self-cal, rms=0.077459Jy sigma=0.000786 ! Fit after self-cal, rms=0.080387Jy sigma=0.000777 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8689 mas, bmaj=2.014 mas, bpa=-3.532 degrees ! Estimated noise=266.43 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000820941 Jy ! Component: 100 - total flux cleaned = 0.000735281 Jy ! Component: 150 - total flux cleaned = 0.000648613 Jy ! Component: 200 - total flux cleaned = 0.000596221 Jy ! Total flux subtracted in 200 components = 0.000596221 Jy ! Clean residual min=-0.000960 max=0.001245 Jy/beam ! Clean residual mean=-0.000000 rms=0.000284 Jy/beam ! Combined flux in latest and established models = 0.113446 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 71 components and 0.113446 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080368Jy sigma=0.000777 ! Fit after self-cal, rms=0.080492Jy sigma=0.000776 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080492Jy sigma=0.000776 ! Fit after self-cal, rms=0.081226Jy sigma=0.000775 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8687 mas, bmaj=2.013 mas, bpa=-3.609 degrees ! Estimated noise=266.434 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000289492 Jy ! Component: 100 - total flux cleaned = 0.000340124 Jy ! Component: 150 - total flux cleaned = 0.000325852 Jy ! Component: 200 - total flux cleaned = 0.000303892 Jy ! Total flux subtracted in 200 components = 0.000303892 Jy ! Clean residual min=-0.001011 max=0.001204 Jy/beam ! Clean residual mean=-0.000001 rms=0.000246 Jy/beam ! Combined flux in latest and established models = 0.11375 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 78 components and 0.11375 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081220Jy sigma=0.000775 ! Fit after self-cal, rms=0.081247Jy sigma=0.000775 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.2, -4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000882998 Jy ! Component: 100 - total flux cleaned = 0.00102508 Jy ! Component: 150 - total flux cleaned = 0.00115245 Jy ! Component: 200 - total flux cleaned = 0.00111749 Jy ! Total flux subtracted in 200 components = 0.00111749 Jy ! Clean residual min=-0.000949 max=0.000787 Jy/beam ! Clean residual mean=0.000000 rms=0.000218 Jy/beam ! Combined flux in latest and established models = 0.114868 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 97 components and 0.114868 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081228Jy sigma=0.000775 ! Fit after self-cal, rms=0.081227Jy sigma=0.000775 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081227Jy sigma=0.000775 ! Fit after self-cal, rms=0.081186Jy sigma=0.000775 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8679 mas, bmaj=2.013 mas, bpa=-3.786 degrees ! Estimated noise=266.022 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000589031 Jy ! Component: 100 - total flux cleaned = 0.000624285 Jy ! Component: 150 - total flux cleaned = 0.000638183 Jy ! Component: 200 - total flux cleaned = 0.0006766 Jy ! Total flux subtracted in 200 components = 0.0006766 Jy ! Clean residual min=-0.000877 max=0.000745 Jy/beam ! Clean residual mean=0.000001 rms=0.000203 Jy/beam ! Combined flux in latest and established models = 0.115544 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 106 components and 0.115544 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081178Jy sigma=0.000775 ! Fit after self-cal, rms=0.081182Jy sigma=0.000775 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000234353 Jy ! Component: 100 - total flux cleaned = 0.000293337 Jy ! Component: 150 - total flux cleaned = 0.000346918 Jy ! Component: 200 - total flux cleaned = 0.000366565 Jy ! Total flux subtracted in 200 components = 0.000366565 Jy ! Clean residual min=-0.000873 max=0.000755 Jy/beam ! Clean residual mean=0.000001 rms=0.000199 Jy/beam ! Combined flux in latest and established models = 0.115911 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 111 components and 0.115911 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081178Jy sigma=0.000775 ! Fit after self-cal, rms=0.081178Jy sigma=0.000775 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081178Jy sigma=0.000775 ! Fit after self-cal, rms=0.081058Jy sigma=0.000775 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.158 mas, bmaj=3.111 mas, bpa=1.19 degrees ! Estimated noise=331.578 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000383079 Jy ! Component: 100 - total flux cleaned = 0.000472266 Jy ! Component: 150 - total flux cleaned = 0.000508909 Jy ! Component: 200 - total flux cleaned = 0.000525067 Jy ! Total flux subtracted in 200 components = 0.000525067 Jy ! Clean residual min=-0.000691 max=0.000856 Jy/beam ! Clean residual mean=0.000003 rms=0.000230 Jy/beam ! Combined flux in latest and established models = 0.116436 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 126 components and 0.116436 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081057Jy sigma=0.000775 ! Fit after self-cal, rms=0.081059Jy sigma=0.000775 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000138176 Jy ! Component: 100 - total flux cleaned = 0.000164569 Jy ! Component: 150 - total flux cleaned = 0.000183226 Jy ! Component: 200 - total flux cleaned = 0.000200881 Jy ! Total flux subtracted in 200 components = 0.000200881 Jy ! Clean residual min=-0.000678 max=0.000851 Jy/beam ! Clean residual mean=0.000003 rms=0.000228 Jy/beam ! Combined flux in latest and established models = 0.116637 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 135 components and 0.116637 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081058Jy sigma=0.000775 ! Fit after self-cal, rms=0.081058Jy sigma=0.000775 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.8672 mas, bmaj=2.013 mas, bpa=-3.889 degrees ! Estimated noise=265.593 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8672 x 2.013 at -3.889 degrees (North through East) ! Clean map min=-0.00073162 max=0.06132 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7142 mas, bmaj=1.773 mas, bpa=-4.2 degrees ! Estimated noise=421.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0483176 Jy ! Component: 100 - total flux cleaned = 0.07004 Jy ! Component: 150 - total flux cleaned = 0.0828557 Jy ! Component: 200 - total flux cleaned = 0.0913119 Jy ! Total flux subtracted in 200 components = 0.0913119 Jy ! Clean residual min=-0.002750 max=0.004632 Jy/beam ! Clean residual mean=-0.000001 rms=0.000770 Jy/beam ! Combined flux in latest and established models = 0.0913119 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.0913119 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8672 mas, bmaj=2.013 mas, bpa=-3.889 degrees ! Estimated noise=265.593 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00791691 Jy ! Component: 100 - total flux cleaned = 0.0130709 Jy ! Component: 150 - total flux cleaned = 0.0165608 Jy ! Component: 200 - total flux cleaned = 0.0190302 Jy ! Total flux subtracted in 200 components = 0.0190302 Jy ! Clean residual min=-0.001130 max=0.001624 Jy/beam ! Clean residual mean=-0.000002 rms=0.000314 Jy/beam ! Combined flux in latest and established models = 0.110342 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 54 components and 0.110342 Jy ! Inverting map ! Added new window around map position (1, 0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00184528 Jy ! Component: 100 - total flux cleaned = 0.00319663 Jy ! Component: 150 - total flux cleaned = 0.00411536 Jy ! Component: 200 - total flux cleaned = 0.00461042 Jy ! Total flux subtracted in 200 components = 0.00461042 Jy ! Clean residual min=-0.000920 max=0.000832 Jy/beam ! Clean residual mean=0.000000 rms=0.000214 Jy/beam ! Combined flux in latest and established models = 0.114952 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 67 components and 0.114952 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.158 mas, bmaj=3.111 mas, bpa=1.19 degrees ! Estimated noise=331.578 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000935873 Jy ! Component: 100 - total flux cleaned = 0.00117382 Jy ! Component: 150 - total flux cleaned = 0.00126322 Jy ! Component: 200 - total flux cleaned = 0.00133727 Jy ! Total flux subtracted in 200 components = 0.00133727 Jy ! Clean residual min=-0.000691 max=0.000804 Jy/beam ! Clean residual mean=0.000002 rms=0.000227 Jy/beam ! Combined flux in latest and established models = 0.11629 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.82738e-05 Jy ! Component: 100 - total flux cleaned = 6.84227e-05 Jy ! Component: 150 - total flux cleaned = 7.65915e-05 Jy ! Component: 200 - total flux cleaned = 9.1432e-05 Jy ! Total flux subtracted in 200 components = 9.1432e-05 Jy ! Clean residual min=-0.000687 max=0.000809 Jy/beam ! Clean residual mean=0.000003 rms=0.000221 Jy/beam ! Combined flux in latest and established models = 0.116381 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 106 components and 0.116381 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8672 mas, bmaj=2.013 mas, bpa=-3.889 degrees ! Estimated noise=265.593 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.76138e-05 Jy ! Component: 100 - total flux cleaned = -3.76142e-05 Jy ! Component: 150 - total flux cleaned = -9.34231e-06 Jy ! Component: 200 - total flux cleaned = 1.60396e-05 Jy ! Total flux subtracted in 200 components = 1.60396e-05 Jy ! Clean residual min=-0.000774 max=0.000727 Jy/beam ! Clean residual mean=0.000001 rms=0.000188 Jy/beam ! Combined flux in latest and established models = 0.116397 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 126 components and 0.116397 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081055Jy sigma=0.000775 ! Fit after self-cal, rms=0.081050Jy sigma=0.000775 wmodel J2210+0857_X_2015_03_17_pus_map.mod ! Writing 126 model components to file: J2210+0857_X_2015_03_17_pus_map.mod wobs J2210+0857_X_2015_03_17_pus_uvs.fits ! Writing UV FITS file: J2210+0857_X_2015_03_17_pus_uvs.fits wwins J2210+0857_X_2015_03_17_pus_map.win ! wwins: Wrote 4 windows to J2210+0857_X_2015_03_17_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000105284 Jy ! Component: 100 - total flux cleaned = -5.5703e-05 Jy ! Component: 150 - total flux cleaned = -3.23413e-05 Jy ! Component: 200 - total flux cleaned = 3.49356e-05 Jy ! Component: 250 - total flux cleaned = 7.8357e-05 Jy ! Component: 300 - total flux cleaned = 7.81662e-05 Jy ! Component: 350 - total flux cleaned = 6.7704e-05 Jy ! Component: 400 - total flux cleaned = 6.76586e-05 Jy ! Component: 450 - total flux cleaned = 5.79043e-05 Jy ! Component: 500 - total flux cleaned = 8.67511e-05 Jy ! Component: 550 - total flux cleaned = 0.000105346 Jy ! Component: 600 - total flux cleaned = 0.000105558 Jy ! Component: 650 - total flux cleaned = 0.000142034 Jy ! Component: 700 - total flux cleaned = 0.000168972 Jy ! Component: 750 - total flux cleaned = 0.000186718 Jy ! Component: 800 - total flux cleaned = 0.000212648 Jy ! Component: 850 - total flux cleaned = 0.000229533 Jy ! Component: 900 - total flux cleaned = 0.000237859 Jy ! Component: 950 - total flux cleaned = 0.000270848 Jy ! Component: 1000 - total flux cleaned = 0.00026278 Jy ! Component: 1050 - total flux cleaned = 0.000271008 Jy ! Component: 1100 - total flux cleaned = 0.000286902 Jy ! Component: 1150 - total flux cleaned = 0.000302598 Jy ! Component: 1200 - total flux cleaned = 0.000310454 Jy ! Component: 1250 - total flux cleaned = 0.000317995 Jy ! Component: 1300 - total flux cleaned = 0.000340617 Jy ! Component: 1350 - total flux cleaned = 0.000355425 Jy ! Component: 1400 - total flux cleaned = 0.000348109 Jy ! Component: 1450 - total flux cleaned = 0.000377083 Jy ! Component: 1500 - total flux cleaned = 0.000391425 Jy ! Component: 1550 - total flux cleaned = 0.000398461 Jy ! Component: 1600 - total flux cleaned = 0.000433215 Jy ! Component: 1650 - total flux cleaned = 0.000433119 Jy ! Component: 1700 - total flux cleaned = 0.000439899 Jy ! Component: 1750 - total flux cleaned = 0.000467053 Jy ! Component: 1800 - total flux cleaned = 0.000480404 Jy ! Component: 1850 - total flux cleaned = 0.000500334 Jy ! Component: 1900 - total flux cleaned = 0.000506944 Jy ! Component: 1950 - total flux cleaned = 0.000558834 Jy ! Component: 2000 - total flux cleaned = 0.000571546 Jy ! Total flux subtracted in 2048 components = 0.000558844 Jy ! Clean residual min=-0.000353 max=0.000378 Jy/beam ! Clean residual mean=0.000001 rms=0.000118 Jy/beam ! Combined flux in latest and established models = 0.116956 Jy keep ! Adding 130 model components to the UV plane model. ! The established model now contains 256 components and 0.116956 Jy ![Exited script file: muppet] wmap "J2210+0857_X_2015_03_17_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8672 x 2.013 at -3.889 degrees (North through East) ! Clean map min=-0.00058943 max=0.060897 Jy/beam ! Writing clean map to FITS file: J2210+0857_X_2015_03_17_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0608968 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00011694 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.576092 0.576092 1.15218 2.30437 4.60873 9.21747 18.4349 36.8699 73.7398 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.06 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8672 x 2.013 at -3.889 degrees (North through East) ! Clean map min=-0.00058943 max=0.060897 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2210+0857_X_2015_03_17_pus_uvs.log closed on Sat Dec 31 19:12:36 2016