! Started logfile: J2144-3312_S_2015_03_17_pus_uvs.log on Fri Dec 30 23:10:04 2016 obs J2144-3312_S_2015_03_17_pus_uva.fits ! Reading UV FITS file: J2144-3312_S_2015_03_17_pus_uva.fits ! AN table 1: 95 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.771696 visibilities/baseline/integration-bin. ! Found source: J2144-3312 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 330 lines of history. ! ! Reading 13196 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2144-3312_S_2015_03_17_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 164 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 114 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 114 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 114 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.709283Jy sigma=0.005617 ! Fit after self-cal, rms=0.560279Jy sigma=0.004411 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.4 mas, bmaj=8.27 mas, bpa=-16.78 degrees ! Estimated noise=1126.68 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.335733 Jy ! Component: 100 - total flux cleaned = 0.422332 Jy ! Total flux subtracted in 100 components = 0.422332 Jy ! Clean residual min=-0.022403 max=0.049944 Jy/beam ! Clean residual mean=0.000094 rms=0.006004 Jy/beam ! Combined flux in latest and established models = 0.422332 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.422332 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169672Jy sigma=0.001192 ! Fit after self-cal, rms=0.169643Jy sigma=0.001192 ! Inverting map ! Added new window around map position (4, -7.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0502273 Jy ! Component: 100 - total flux cleaned = 0.082475 Jy ! Total flux subtracted in 100 components = 0.082475 Jy ! Clean residual min=-0.016741 max=0.031347 Jy/beam ! Clean residual mean=0.000041 rms=0.004110 Jy/beam ! Combined flux in latest and established models = 0.504807 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 27 components and 0.504807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144529Jy sigma=0.001000 ! Fit after self-cal, rms=0.144005Jy sigma=0.000996 ! Inverting map ! Added new window around map position (-4, 8.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0275883 Jy ! Component: 100 - total flux cleaned = 0.0466582 Jy ! Total flux subtracted in 100 components = 0.0466582 Jy ! Clean residual min=-0.013746 max=0.016150 Jy/beam ! Clean residual mean=0.000014 rms=0.003334 Jy/beam ! Combined flux in latest and established models = 0.551465 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 46 components and 0.551465 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134769Jy sigma=0.000939 ! Fit after self-cal, rms=0.134724Jy sigma=0.000939 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.963 mas, bmaj=9.772 mas, bpa=-15.7 degrees ! Estimated noise=809.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0203206 Jy ! Component: 100 - total flux cleaned = 0.0324738 Jy ! Component: 150 - total flux cleaned = 0.0405398 Jy ! Component: 200 - total flux cleaned = 0.0433999 Jy ! Total flux subtracted in 200 components = 0.0433999 Jy ! Clean residual min=-0.012613 max=0.018336 Jy/beam ! Clean residual mean=-0.000054 rms=0.004145 Jy/beam ! Combined flux in latest and established models = 0.594865 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 64 components and 0.594865 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130181Jy sigma=0.000920 ! Fit after self-cal, rms=0.130167Jy sigma=0.000920 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.85 HN 1.09 KP 1.13 ! LA 0.99 MK 0.97 NL 0.91 OV 0.99 ! PT 1.10 SC 0.95 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.87 HN 1.18 KP 1.10 ! LA 0.98 MK 1.01 NL 1.03 OV 1.02 ! PT 1.07 SC 1.02 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.89 HN 1.14 KP 0.97 ! LA 0.80 MK 1.04 NL 1.15 OV 0.94 ! PT 1.03 SC 1.05 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.93 HN 1.09 KP 0.94 ! LA 0.85 MK 1.03 NL 1.01 OV 1.00 ! PT 1.08 SC 0.98 ! ! ! Fit before self-cal, rms=0.130167Jy sigma=0.000920 ! Fit after self-cal, rms=0.115734Jy sigma=0.000808 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.995 mas, bmaj=9.799 mas, bpa=-15.76 degrees ! Estimated noise=818.849 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00772845 Jy ! Component: 100 - total flux cleaned = -0.0118689 Jy ! Component: 150 - total flux cleaned = -0.0127387 Jy ! Component: 200 - total flux cleaned = -0.0131042 Jy ! Total flux subtracted in 200 components = -0.0131042 Jy ! Clean residual min=-0.007346 max=0.009200 Jy/beam ! Clean residual mean=-0.000044 rms=0.002056 Jy/beam ! Combined flux in latest and established models = 0.581761 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 88 components and 0.581761 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115160Jy sigma=0.000803 ! Fit after self-cal, rms=0.115086Jy sigma=0.000803 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115086Jy sigma=0.000803 ! Fit after self-cal, rms=0.115726Jy sigma=0.000802 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.004 mas, bmaj=9.814 mas, bpa=-15.78 degrees ! Estimated noise=818.562 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00494927 Jy ! Component: 100 - total flux cleaned = -0.00670854 Jy ! Component: 150 - total flux cleaned = -0.00736876 Jy ! Component: 200 - total flux cleaned = -0.00785209 Jy ! Total flux subtracted in 200 components = -0.00785209 Jy ! Clean residual min=-0.006768 max=0.008739 Jy/beam ! Clean residual mean=-0.000044 rms=0.001943 Jy/beam ! Combined flux in latest and established models = 0.573909 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 99 components and 0.573909 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115429Jy sigma=0.000799 ! Fit after self-cal, rms=0.115432Jy sigma=0.000799 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (25, 12.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00818349 Jy ! Component: 100 - total flux cleaned = 0.0118651 Jy ! Component: 150 - total flux cleaned = 0.0128384 Jy ! Component: 200 - total flux cleaned = 0.0132086 Jy ! Total flux subtracted in 200 components = 0.0132086 Jy ! Clean residual min=-0.006371 max=0.007506 Jy/beam ! Clean residual mean=-0.000031 rms=0.001729 Jy/beam ! Combined flux in latest and established models = 0.587117 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 131 components and 0.587117 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114831Jy sigma=0.000795 ! Fit after self-cal, rms=0.114808Jy sigma=0.000794 ! Inverting map ! Added new window around map position (42, -82). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00741271 Jy ! Component: 100 - total flux cleaned = 0.0112125 Jy ! Component: 150 - total flux cleaned = 0.0128905 Jy ! Component: 200 - total flux cleaned = 0.0139337 Jy ! Total flux subtracted in 200 components = 0.0139337 Jy ! Clean residual min=-0.005963 max=0.005064 Jy/beam ! Clean residual mean=-0.000019 rms=0.001473 Jy/beam ! Combined flux in latest and established models = 0.601051 Jy ! Performing phase self-cal ! Adding 56 model components to the UV plane model. ! The established model now contains 182 components and 0.601051 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114285Jy sigma=0.000790 ! Fit after self-cal, rms=0.114245Jy sigma=0.000790 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114245Jy sigma=0.000790 ! Fit after self-cal, rms=0.115197Jy sigma=0.000785 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.011 mas, bmaj=9.815 mas, bpa=-15.87 degrees ! Estimated noise=819.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00225679 Jy ! Component: 100 - total flux cleaned = -0.00181052 Jy ! Component: 150 - total flux cleaned = -0.00151552 Jy ! Component: 200 - total flux cleaned = -0.0013332 Jy ! Total flux subtracted in 200 components = -0.0013332 Jy ! Clean residual min=-0.005214 max=0.004544 Jy/beam ! Clean residual mean=-0.000017 rms=0.001200 Jy/beam ! Combined flux in latest and established models = 0.599717 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 207 components and 0.599717 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114971Jy sigma=0.000784 ! Fit after self-cal, rms=0.114980Jy sigma=0.000784 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000547101 Jy ! Component: 100 - total flux cleaned = 0.000623985 Jy ! Component: 150 - total flux cleaned = 0.000902802 Jy ! Component: 200 - total flux cleaned = 0.000840111 Jy ! Total flux subtracted in 200 components = 0.000840111 Jy ! Clean residual min=-0.004964 max=0.004459 Jy/beam ! Clean residual mean=-0.000017 rms=0.001168 Jy/beam ! Combined flux in latest and established models = 0.600557 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 228 components and 0.600557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114886Jy sigma=0.000783 ! Fit after self-cal, rms=0.114881Jy sigma=0.000783 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114881Jy sigma=0.000783 ! Fit after self-cal, rms=0.115615Jy sigma=0.000783 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.907 mas, bmaj=23.3 mas, bpa=-3.569 degrees ! Estimated noise=1034.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00111909 Jy ! Component: 100 - total flux cleaned = -0.00102448 Jy ! Component: 150 - total flux cleaned = -0.000944469 Jy ! Component: 200 - total flux cleaned = -0.00080278 Jy ! Total flux subtracted in 200 components = -0.00080278 Jy ! Clean residual min=-0.005446 max=0.005616 Jy/beam ! Clean residual mean=-0.000029 rms=0.001551 Jy/beam ! Combined flux in latest and established models = 0.599755 Jy selfcal ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 261 components and 0.599754 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115547Jy sigma=0.000783 ! Fit after self-cal, rms=0.115555Jy sigma=0.000783 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.33617e-05 Jy ! Component: 100 - total flux cleaned = 0.000205106 Jy ! Component: 150 - total flux cleaned = 0.000310954 Jy ! Component: 200 - total flux cleaned = 0.000358334 Jy ! Total flux subtracted in 200 components = 0.000358334 Jy ! Clean residual min=-0.005326 max=0.005535 Jy/beam ! Clean residual mean=-0.000028 rms=0.001519 Jy/beam ! Combined flux in latest and established models = 0.600113 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 279 components and 0.600113 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115533Jy sigma=0.000782 ! Fit after self-cal, rms=0.115531Jy sigma=0.000782 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.015 mas, bmaj=9.82 mas, bpa=-15.91 degrees ! Estimated noise=819.803 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.015 x 9.82 at -15.91 degrees (North through East) ! Clean map min=-0.0045766 max=0.42974 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.427 mas, bmaj=8.254 mas, bpa=-16.86 degrees ! Estimated noise=1150.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.342476 Jy ! Component: 100 - total flux cleaned = 0.4282 Jy ! Component: 150 - total flux cleaned = 0.470176 Jy ! Component: 200 - total flux cleaned = 0.495652 Jy ! Total flux subtracted in 200 components = 0.495652 Jy ! Clean residual min=-0.008546 max=0.016209 Jy/beam ! Clean residual mean=0.000035 rms=0.002447 Jy/beam ! Combined flux in latest and established models = 0.495652 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.495652 Jy ! Inverting map and beam ! Estimated beam: bmin=3.015 mas, bmaj=9.82 mas, bpa=-15.91 degrees ! Estimated noise=819.803 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4, 3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0280704 Jy ! Component: 100 - total flux cleaned = 0.0445483 Jy ! Component: 150 - total flux cleaned = 0.0560448 Jy ! Component: 200 - total flux cleaned = 0.0649557 Jy ! Total flux subtracted in 200 components = 0.0649557 Jy ! Clean residual min=-0.005776 max=0.006532 Jy/beam ! Clean residual mean=-0.000028 rms=0.001756 Jy/beam ! Combined flux in latest and established models = 0.560608 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 86 components and 0.560608 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.907 mas, bmaj=23.3 mas, bpa=-3.569 degrees ! Estimated noise=1034.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0118211 Jy ! Component: 100 - total flux cleaned = 0.0199429 Jy ! Component: 150 - total flux cleaned = 0.0258538 Jy ! Component: 200 - total flux cleaned = 0.0303188 Jy ! Total flux subtracted in 200 components = 0.0303188 Jy ! Clean residual min=-0.006369 max=0.005603 Jy/beam ! Clean residual mean=-0.000024 rms=0.001748 Jy/beam ! Combined flux in latest and established models = 0.590927 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00212892 Jy ! Component: 100 - total flux cleaned = 0.00368145 Jy ! Component: 150 - total flux cleaned = 0.00502001 Jy ! Component: 200 - total flux cleaned = 0.00609106 Jy ! Total flux subtracted in 200 components = 0.00609106 Jy ! Clean residual min=-0.005473 max=0.005319 Jy/beam ! Clean residual mean=-0.000017 rms=0.001566 Jy/beam ! Combined flux in latest and established models = 0.597018 Jy ! Adding 120 model components to the UV plane model. ! The established model now contains 199 components and 0.597018 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.015 mas, bmaj=9.82 mas, bpa=-15.91 degrees ! Estimated noise=819.803 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0013991 Jy ! Component: 100 - total flux cleaned = 0.00218378 Jy ! Component: 150 - total flux cleaned = 0.00236393 Jy ! Component: 200 - total flux cleaned = 0.00253172 Jy ! Total flux subtracted in 200 components = 0.00253172 Jy ! Clean residual min=-0.004183 max=0.003862 Jy/beam ! Clean residual mean=-0.000008 rms=0.001075 Jy/beam ! Combined flux in latest and established models = 0.599549 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 231 components and 0.599549 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115436Jy sigma=0.000782 ! Fit after self-cal, rms=0.115375Jy sigma=0.000782 wmodel J2144-3312_S_2015_03_17_pus_map.mod ! Writing 231 model components to file: J2144-3312_S_2015_03_17_pus_map.mod wobs J2144-3312_S_2015_03_17_pus_uvs.fits ! Writing UV FITS file: J2144-3312_S_2015_03_17_pus_uvs.fits wwins J2144-3312_S_2015_03_17_pus_map.win ! wwins: Wrote 6 windows to J2144-3312_S_2015_03_17_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00055858 Jy ! Component: 100 - total flux cleaned = -0.0013279 Jy ! Component: 150 - total flux cleaned = -0.0019222 Jy ! Component: 200 - total flux cleaned = -0.00261042 Jy ! Component: 250 - total flux cleaned = -0.00326781 Jy ! Component: 300 - total flux cleaned = -0.0038453 Jy ! Component: 350 - total flux cleaned = -0.00418041 Jy ! Component: 400 - total flux cleaned = -0.00466933 Jy ! Component: 450 - total flux cleaned = -0.00503736 Jy ! Component: 500 - total flux cleaned = -0.00529382 Jy ! Component: 550 - total flux cleaned = -0.00569446 Jy ! Component: 600 - total flux cleaned = -0.00593753 Jy ! Component: 650 - total flux cleaned = -0.00617569 Jy ! Component: 700 - total flux cleaned = -0.006409 Jy ! Component: 750 - total flux cleaned = -0.00654692 Jy ! Component: 800 - total flux cleaned = -0.00672565 Jy ! Component: 850 - total flux cleaned = -0.00694446 Jy ! Component: 900 - total flux cleaned = -0.00711531 Jy ! Component: 950 - total flux cleaned = -0.00724081 Jy ! Component: 1000 - total flux cleaned = -0.00740668 Jy ! Component: 1050 - total flux cleaned = -0.00760923 Jy ! Component: 1100 - total flux cleaned = -0.00788576 Jy ! Component: 1150 - total flux cleaned = -0.00788599 Jy ! Component: 1200 - total flux cleaned = -0.00807799 Jy ! Component: 1250 - total flux cleaned = -0.00815343 Jy ! Component: 1300 - total flux cleaned = -0.00815304 Jy ! Component: 1350 - total flux cleaned = -0.00818853 Jy ! Component: 1400 - total flux cleaned = -0.00793778 Jy ! Component: 1450 - total flux cleaned = -0.00797245 Jy ! Component: 1500 - total flux cleaned = -0.00776335 Jy ! Component: 1550 - total flux cleaned = -0.00772909 Jy ! Component: 1600 - total flux cleaned = -0.00759415 Jy ! Component: 1650 - total flux cleaned = -0.00752791 Jy ! Component: 1700 - total flux cleaned = -0.00733135 Jy ! Component: 1750 - total flux cleaned = -0.00742906 Jy ! Component: 1800 - total flux cleaned = -0.00749337 Jy ! Component: 1850 - total flux cleaned = -0.00746148 Jy ! Component: 1900 - total flux cleaned = -0.00743087 Jy ! Component: 1950 - total flux cleaned = -0.00749286 Jy ! Component: 2000 - total flux cleaned = -0.00749224 Jy ! Component: 2050 - total flux cleaned = -0.0074919 Jy ! Component: 2100 - total flux cleaned = -0.00749152 Jy ! Component: 2150 - total flux cleaned = -0.00752099 Jy ! Component: 2200 - total flux cleaned = -0.00760884 Jy ! Component: 2250 - total flux cleaned = -0.00760884 Jy ! Component: 2300 - total flux cleaned = -0.00758082 Jy ! Component: 2350 - total flux cleaned = -0.00772196 Jy ! Component: 2400 - total flux cleaned = -0.00780528 Jy ! Component: 2450 - total flux cleaned = -0.00780494 Jy ! Component: 2500 - total flux cleaned = -0.007832 Jy ! Component: 2550 - total flux cleaned = -0.00785887 Jy ! Component: 2600 - total flux cleaned = -0.00785886 Jy ! Component: 2650 - total flux cleaned = -0.00783275 Jy ! Component: 2700 - total flux cleaned = -0.00783263 Jy ! Component: 2750 - total flux cleaned = -0.00778059 Jy ! Component: 2800 - total flux cleaned = -0.00778043 Jy ! Component: 2850 - total flux cleaned = -0.00772941 Jy ! Component: 2900 - total flux cleaned = -0.00770404 Jy ! Component: 2950 - total flux cleaned = -0.00770412 Jy ! Component: 3000 - total flux cleaned = -0.00755582 Jy ! Component: 3050 - total flux cleaned = -0.00755616 Jy ! Component: 3100 - total flux cleaned = -0.00765313 Jy ! Component: 3150 - total flux cleaned = -0.00750868 Jy ! Component: 3200 - total flux cleaned = -0.00743711 Jy ! Component: 3250 - total flux cleaned = -0.00736634 Jy ! Component: 3300 - total flux cleaned = -0.00738975 Jy ! Component: 3350 - total flux cleaned = -0.00729696 Jy ! Component: 3400 - total flux cleaned = -0.00727388 Jy ! Component: 3450 - total flux cleaned = -0.00718278 Jy ! Component: 3500 - total flux cleaned = -0.00720524 Jy ! Component: 3550 - total flux cleaned = -0.00718213 Jy ! Component: 3600 - total flux cleaned = -0.00707054 Jy ! Component: 3650 - total flux cleaned = -0.00709282 Jy ! Component: 3700 - total flux cleaned = -0.00696126 Jy ! Component: 3750 - total flux cleaned = -0.00685293 Jy ! Component: 3800 - total flux cleaned = -0.00687423 Jy ! Component: 3850 - total flux cleaned = -0.0067243 Jy ! Component: 3900 - total flux cleaned = -0.00672429 Jy ! Component: 3950 - total flux cleaned = -0.00659791 Jy ! Component: 4000 - total flux cleaned = -0.0065771 Jy ! Component: 4050 - total flux cleaned = -0.00647315 Jy ! Total flux subtracted in 4096 components = -0.00637009 Jy ! Clean residual min=-0.001135 max=0.001214 Jy/beam ! Clean residual mean=-0.000003 rms=0.000426 Jy/beam ! Combined flux in latest and established models = 0.593179 Jy keep ! Adding 367 model components to the UV plane model. ! The established model now contains 598 components and 0.593179 Jy ![Exited script file: muppet] wmap "J2144-3312_S_2015_03_17_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.015 x 9.82 at -15.91 degrees (North through East) ! Clean map min=-0.0032677 max=0.43905 Jy/beam ! Writing clean map to FITS file: J2144-3312_S_2015_03_17_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.439049 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000415848 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.284147 0.284147 0.568294 1.13659 2.27318 4.54635 9.09271 18.1854 36.3708 72.7417 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.439 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.015 x 9.82 at -15.91 degrees (North through East) ! Clean map min=-0.0032677 max=0.43905 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2144-3312_S_2015_03_17_pus_uvs.log closed on Fri Dec 30 23:10:09 2016