! Started logfile: J2120+6642_S_2015_03_17_pus_uvs.log on Fri Dec 30 23:08:44 2016 obs J2120+6642_S_2015_03_17_pus_uva.fits ! Reading UV FITS file: J2120+6642_S_2015_03_17_pus_uva.fits ! AN table 1: 123 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.886721 visibilities/baseline/integration-bin. ! Found source: J2120+6642 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 330 lines of history. ! ! Reading 19632 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2120+6642_S_2015_03_17_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.929874Jy sigma=0.010865 ! Fit after self-cal, rms=0.859813Jy sigma=0.010078 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.812 mas, bmaj=4.059 mas, bpa=-37.4 degrees ! Estimated noise=750.287 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.104843 Jy ! Component: 100 - total flux cleaned = 0.148478 Jy ! Total flux subtracted in 100 components = 0.148478 Jy ! Clean residual min=-0.017714 max=0.076240 Jy/beam ! Clean residual mean=0.000047 rms=0.005161 Jy/beam ! Combined flux in latest and established models = 0.148478 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.148478 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130633Jy sigma=0.001412 ! Fit after self-cal, rms=0.129842Jy sigma=0.001403 ! Inverting map ! Added new window around map position (-8, -5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0629446 Jy ! Component: 100 - total flux cleaned = 0.0898289 Jy ! Total flux subtracted in 100 components = 0.0898289 Jy ! Clean residual min=-0.008686 max=0.018924 Jy/beam ! Clean residual mean=0.000027 rms=0.002435 Jy/beam ! Combined flux in latest and established models = 0.238307 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 19 components and 0.238307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093163Jy sigma=0.000983 ! Fit after self-cal, rms=0.087771Jy sigma=0.000917 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0221176 Jy ! Component: 100 - total flux cleaned = 0.0351406 Jy ! Total flux subtracted in 100 components = 0.0351406 Jy ! Clean residual min=-0.005901 max=0.007202 Jy/beam ! Clean residual mean=0.000015 rms=0.001432 Jy/beam ! Combined flux in latest and established models = 0.273448 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 33 components and 0.273448 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080244Jy sigma=0.000839 ! Fit after self-cal, rms=0.079768Jy sigma=0.000833 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.01072 Jy ! Component: 100 - total flux cleaned = 0.0177017 Jy ! Total flux subtracted in 100 components = 0.0177017 Jy ! Clean residual min=-0.005315 max=0.005095 Jy/beam ! Clean residual mean=0.000009 rms=0.001160 Jy/beam ! Combined flux in latest and established models = 0.291149 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 38 components and 0.29115 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077790Jy sigma=0.000816 ! Fit after self-cal, rms=0.077686Jy sigma=0.000815 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.387 mas, bmaj=4.821 mas, bpa=-34.59 degrees ! Estimated noise=440.103 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00621258 Jy ! Component: 100 - total flux cleaned = 0.00998759 Jy ! Component: 150 - total flux cleaned = 0.0115687 Jy ! Component: 200 - total flux cleaned = 0.0124755 Jy ! Total flux subtracted in 200 components = 0.0124755 Jy ! Clean residual min=-0.004450 max=0.004031 Jy/beam ! Clean residual mean=0.000022 rms=0.001040 Jy/beam ! Combined flux in latest and established models = 0.303625 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 53 components and 0.303625 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076901Jy sigma=0.000811 ! Fit after self-cal, rms=0.076860Jy sigma=0.000810 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.90 HN 0.96 KP 1.09 ! LA 0.97 MK 1.03 NL 0.88 OV 1.02 ! PT 1.05 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.92 HN 1.01 KP 1.08 ! LA 0.95 MK 1.06 NL 0.99 OV 1.05 ! PT 1.04 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.96 HN 1.01 KP 0.94 ! LA 0.78 MK 1.06 NL 1.13 OV 0.99 ! PT 1.02 SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.98 HN 0.96 KP 0.94 ! LA 0.84 MK 1.10 NL 0.99 OV 1.01 ! PT 1.07 SC 0.97 ! ! ! Fit before self-cal, rms=0.076860Jy sigma=0.000810 ! Fit after self-cal, rms=0.071971Jy sigma=0.000779 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.441 mas, bmaj=4.883 mas, bpa=-34.6 degrees ! Estimated noise=441.961 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00173322 Jy ! Component: 100 - total flux cleaned = -0.00227981 Jy ! Component: 150 - total flux cleaned = -0.00233944 Jy ! Component: 200 - total flux cleaned = -0.00239148 Jy ! Total flux subtracted in 200 components = -0.00239148 Jy ! Clean residual min=-0.002591 max=0.002091 Jy/beam ! Clean residual mean=-0.000001 rms=0.000505 Jy/beam ! Combined flux in latest and established models = 0.301233 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 59 components and 0.301234 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071799Jy sigma=0.000777 ! Fit after self-cal, rms=0.071734Jy sigma=0.000777 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071734Jy sigma=0.000777 ! Fit after self-cal, rms=0.072032Jy sigma=0.000776 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.453 mas, bmaj=4.906 mas, bpa=-34.07 degrees ! Estimated noise=441.825 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00156306 Jy ! Component: 100 - total flux cleaned = -0.00191289 Jy ! Component: 150 - total flux cleaned = -0.0021217 Jy ! Component: 200 - total flux cleaned = -0.00230639 Jy ! Total flux subtracted in 200 components = -0.00230639 Jy ! Clean residual min=-0.002262 max=0.001813 Jy/beam ! Clean residual mean=-0.000001 rms=0.000444 Jy/beam ! Combined flux in latest and established models = 0.298927 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 68 components and 0.298927 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071959Jy sigma=0.000775 ! Fit after self-cal, rms=0.071960Jy sigma=0.000775 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000118025 Jy ! Component: 100 - total flux cleaned = -0.000274495 Jy ! Component: 150 - total flux cleaned = -0.000388577 Jy ! Component: 200 - total flux cleaned = -0.000468543 Jy ! Total flux subtracted in 200 components = -0.000468543 Jy ! Clean residual min=-0.002203 max=0.001739 Jy/beam ! Clean residual mean=-0.000001 rms=0.000439 Jy/beam ! Combined flux in latest and established models = 0.298459 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 74 components and 0.298459 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071934Jy sigma=0.000775 ! Fit after self-cal, rms=0.071933Jy sigma=0.000775 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071933Jy sigma=0.000775 ! Fit after self-cal, rms=0.072226Jy sigma=0.000775 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.473 mas, bmaj=4.929 mas, bpa=-33.97 degrees ! Estimated noise=442.943 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00128381 Jy ! Component: 100 - total flux cleaned = -0.00162128 Jy ! Component: 150 - total flux cleaned = -0.00178718 Jy ! Component: 200 - total flux cleaned = -0.00193979 Jy ! Total flux subtracted in 200 components = -0.00193979 Jy ! Clean residual min=-0.001963 max=0.001588 Jy/beam ! Clean residual mean=-0.000002 rms=0.000413 Jy/beam ! Combined flux in latest and established models = 0.296519 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 76 components and 0.296519 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072185Jy sigma=0.000774 ! Fit after self-cal, rms=0.072186Jy sigma=0.000774 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000152026 Jy ! Component: 100 - total flux cleaned = -0.000282158 Jy ! Component: 150 - total flux cleaned = -0.000378628 Jy ! Component: 200 - total flux cleaned = -0.000446525 Jy ! Total flux subtracted in 200 components = -0.000446525 Jy ! Clean residual min=-0.001962 max=0.001553 Jy/beam ! Clean residual mean=-0.000001 rms=0.000410 Jy/beam ! Combined flux in latest and established models = 0.296072 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 76 components and 0.296072 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072168Jy sigma=0.000774 ! Fit after self-cal, rms=0.072167Jy sigma=0.000774 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072167Jy sigma=0.000774 ! Fit after self-cal, rms=0.072408Jy sigma=0.000774 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.967 mas, bmaj=8.914 mas, bpa=-50.93 degrees ! Estimated noise=573.822 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00102646 Jy ! Component: 100 - total flux cleaned = -0.00152626 Jy ! Component: 150 - total flux cleaned = -0.00174146 Jy ! Component: 200 - total flux cleaned = -0.00174952 Jy ! Total flux subtracted in 200 components = -0.00174952 Jy ! Clean residual min=-0.001831 max=0.001917 Jy/beam ! Clean residual mean=-0.000003 rms=0.000475 Jy/beam ! Combined flux in latest and established models = 0.294323 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 84 components and 0.294323 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072406Jy sigma=0.000774 ! Fit after self-cal, rms=0.072408Jy sigma=0.000774 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.4266e-05 Jy ! Component: 100 - total flux cleaned = -3.37694e-05 Jy ! Component: 150 - total flux cleaned = -4.09199e-05 Jy ! Component: 200 - total flux cleaned = -4.72495e-05 Jy ! Total flux subtracted in 200 components = -4.72495e-05 Jy ! Clean residual min=-0.001827 max=0.001917 Jy/beam ! Clean residual mean=-0.000003 rms=0.000474 Jy/beam ! Combined flux in latest and established models = 0.294275 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 87 components and 0.294276 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072411Jy sigma=0.000774 ! Fit after self-cal, rms=0.072411Jy sigma=0.000774 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.489 mas, bmaj=4.948 mas, bpa=-33.9 degrees ! Estimated noise=443.786 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.489 x 4.948 at -33.9 degrees (North through East) ! Clean map min=-0.0016943 max=0.1418 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.897 mas, bmaj=4.161 mas, bpa=-36.7 degrees ! Estimated noise=769.868 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.122825 Jy ! Component: 100 - total flux cleaned = 0.18541 Jy ! Component: 150 - total flux cleaned = 0.220548 Jy ! Component: 200 - total flux cleaned = 0.241663 Jy ! Total flux subtracted in 200 components = 0.241663 Jy ! Clean residual min=-0.005895 max=0.011080 Jy/beam ! Clean residual mean=0.000016 rms=0.001485 Jy/beam ! Combined flux in latest and established models = 0.241663 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.241663 Jy ! Inverting map and beam ! Estimated beam: bmin=3.489 mas, bmaj=4.948 mas, bpa=-33.9 degrees ! Estimated noise=443.786 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0181745 Jy ! Component: 100 - total flux cleaned = 0.0294643 Jy ! Component: 150 - total flux cleaned = 0.0367001 Jy ! Component: 200 - total flux cleaned = 0.0415282 Jy ! Total flux subtracted in 200 components = 0.0415282 Jy ! Clean residual min=-0.002275 max=0.002955 Jy/beam ! Clean residual mean=0.000008 rms=0.000547 Jy/beam ! Combined flux in latest and established models = 0.283192 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 52 components and 0.283192 Jy ! Inverting map ! Added new window around map position (-4, -2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00341798 Jy ! Component: 100 - total flux cleaned = 0.00582079 Jy ! Component: 150 - total flux cleaned = 0.0075349 Jy ! Component: 200 - total flux cleaned = 0.00877291 Jy ! Total flux subtracted in 200 components = 0.00877291 Jy ! Clean residual min=-0.001976 max=0.001537 Jy/beam ! Clean residual mean=0.000000 rms=0.000391 Jy/beam ! Combined flux in latest and established models = 0.291965 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 71 components and 0.291965 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.967 mas, bmaj=8.914 mas, bpa=-50.93 degrees ! Estimated noise=573.822 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00127722 Jy ! Component: 100 - total flux cleaned = 0.00165161 Jy ! Component: 150 - total flux cleaned = 0.00177392 Jy ! Component: 200 - total flux cleaned = 0.00180651 Jy ! Total flux subtracted in 200 components = 0.00180651 Jy ! Clean residual min=-0.001875 max=0.001929 Jy/beam ! Clean residual mean=-0.000002 rms=0.000479 Jy/beam ! Combined flux in latest and established models = 0.293771 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.82625e-05 Jy ! Component: 100 - total flux cleaned = 5.24847e-05 Jy ! Component: 150 - total flux cleaned = 7.34713e-05 Jy ! Component: 200 - total flux cleaned = 9.22113e-05 Jy ! Total flux subtracted in 200 components = 9.22113e-05 Jy ! Clean residual min=-0.001868 max=0.001886 Jy/beam ! Clean residual mean=-0.000002 rms=0.000475 Jy/beam ! Combined flux in latest and established models = 0.293863 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 108 components and 0.293863 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.489 mas, bmaj=4.948 mas, bpa=-33.9 degrees ! Estimated noise=443.786 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000191768 Jy ! Component: 100 - total flux cleaned = 0.00010388 Jy ! Component: 150 - total flux cleaned = 0.000118956 Jy ! Component: 200 - total flux cleaned = 0.000148559 Jy ! Total flux subtracted in 200 components = 0.000148559 Jy ! Clean residual min=-0.001837 max=0.001384 Jy/beam ! Clean residual mean=-0.000001 rms=0.000370 Jy/beam ! Combined flux in latest and established models = 0.294012 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 121 components and 0.294012 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072298Jy sigma=0.000773 ! Fit after self-cal, rms=0.072287Jy sigma=0.000773 wmodel J2120+6642_S_2015_03_17_pus_map.mod ! Writing 121 model components to file: J2120+6642_S_2015_03_17_pus_map.mod wobs J2120+6642_S_2015_03_17_pus_uvs.fits ! Writing UV FITS file: J2120+6642_S_2015_03_17_pus_uvs.fits wwins J2120+6642_S_2015_03_17_pus_map.win ! wwins: Wrote 3 windows to J2120+6642_S_2015_03_17_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000665114 Jy ! Component: 100 - total flux cleaned = -0.000947352 Jy ! Component: 150 - total flux cleaned = -0.00119149 Jy ! Component: 200 - total flux cleaned = -0.00147233 Jy ! Component: 250 - total flux cleaned = -0.00172078 Jy ! Component: 300 - total flux cleaned = -0.0018951 Jy ! Component: 350 - total flux cleaned = -0.00206493 Jy ! Component: 400 - total flux cleaned = -0.00223082 Jy ! Component: 450 - total flux cleaned = -0.00243365 Jy ! Component: 500 - total flux cleaned = -0.00253308 Jy ! Component: 550 - total flux cleaned = -0.00268911 Jy ! Component: 600 - total flux cleaned = -0.00288077 Jy ! Component: 650 - total flux cleaned = -0.0030122 Jy ! Component: 700 - total flux cleaned = -0.00314168 Jy ! Component: 750 - total flux cleaned = -0.00323247 Jy ! Component: 800 - total flux cleaned = -0.00332184 Jy ! Component: 850 - total flux cleaned = -0.00339244 Jy ! Component: 900 - total flux cleaned = -0.00347945 Jy ! Component: 950 - total flux cleaned = -0.00356509 Jy ! Component: 1000 - total flux cleaned = -0.00364952 Jy ! Component: 1050 - total flux cleaned = -0.00374975 Jy ! Component: 1100 - total flux cleaned = -0.00381537 Jy ! Component: 1150 - total flux cleaned = -0.00386384 Jy ! Component: 1200 - total flux cleaned = -0.00395955 Jy ! Component: 1250 - total flux cleaned = -0.00405394 Jy ! Component: 1300 - total flux cleaned = -0.00408506 Jy ! Component: 1350 - total flux cleaned = -0.00416206 Jy ! Component: 1400 - total flux cleaned = -0.00419236 Jy ! Component: 1450 - total flux cleaned = -0.00423727 Jy ! Component: 1500 - total flux cleaned = -0.00429647 Jy ! Component: 1550 - total flux cleaned = -0.00435497 Jy ! Component: 1600 - total flux cleaned = -0.00439837 Jy ! Component: 1650 - total flux cleaned = -0.00441286 Jy ! Component: 1700 - total flux cleaned = -0.00446945 Jy ! Component: 1750 - total flux cleaned = -0.00455319 Jy ! Component: 1800 - total flux cleaned = -0.00462258 Jy ! Component: 1850 - total flux cleaned = -0.00464989 Jy ! Component: 1900 - total flux cleaned = -0.00470423 Jy ! Component: 1950 - total flux cleaned = -0.00477138 Jy ! Component: 2000 - total flux cleaned = -0.00481125 Jy ! Component: 2050 - total flux cleaned = -0.00483775 Jy ! Component: 2100 - total flux cleaned = -0.00488994 Jy ! Component: 2150 - total flux cleaned = -0.00491556 Jy ! Component: 2200 - total flux cleaned = -0.00496673 Jy ! Component: 2250 - total flux cleaned = -0.00501748 Jy ! Component: 2300 - total flux cleaned = -0.00506759 Jy ! Component: 2350 - total flux cleaned = -0.00515463 Jy ! Component: 2400 - total flux cleaned = -0.00521614 Jy ! Component: 2450 - total flux cleaned = -0.00522829 Jy ! Component: 2500 - total flux cleaned = -0.00532499 Jy ! Component: 2550 - total flux cleaned = -0.00533686 Jy ! Component: 2600 - total flux cleaned = -0.00540811 Jy ! Component: 2650 - total flux cleaned = -0.00545521 Jy ! Component: 2700 - total flux cleaned = -0.00554856 Jy ! Component: 2750 - total flux cleaned = -0.0055834 Jy ! Component: 2800 - total flux cleaned = -0.00561787 Jy ! Component: 2850 - total flux cleaned = -0.00566342 Jy ! Component: 2900 - total flux cleaned = -0.00574241 Jy ! Component: 2950 - total flux cleaned = -0.00578708 Jy ! Component: 3000 - total flux cleaned = -0.00583139 Jy ! Component: 3050 - total flux cleaned = -0.00588654 Jy ! Component: 3100 - total flux cleaned = -0.00589741 Jy ! Component: 3150 - total flux cleaned = -0.00593007 Jy ! Component: 3200 - total flux cleaned = -0.00598394 Jy ! Component: 3250 - total flux cleaned = -0.00601597 Jy ! Component: 3300 - total flux cleaned = -0.00604763 Jy ! Component: 3350 - total flux cleaned = -0.00602676 Jy ! Component: 3400 - total flux cleaned = -0.00609989 Jy ! Component: 3450 - total flux cleaned = -0.00614132 Jy ! Component: 3500 - total flux cleaned = -0.00613097 Jy ! Component: 3550 - total flux cleaned = -0.0061617 Jy ! Component: 3600 - total flux cleaned = -0.00621253 Jy ! Component: 3650 - total flux cleaned = -0.00628295 Jy ! Component: 3700 - total flux cleaned = -0.00632294 Jy ! Component: 3750 - total flux cleaned = -0.0063726 Jy ! Component: 3800 - total flux cleaned = -0.00639235 Jy ! Component: 3850 - total flux cleaned = -0.00644122 Jy ! Component: 3900 - total flux cleaned = -0.00648018 Jy ! Component: 3950 - total flux cleaned = -0.00650901 Jy ! Component: 4000 - total flux cleaned = -0.00655695 Jy ! Component: 4050 - total flux cleaned = -0.00659501 Jy ! Total flux subtracted in 4096 components = -0.0066423 Jy ! Clean residual min=-0.000492 max=0.000574 Jy/beam ! Clean residual mean=-0.000002 rms=0.000169 Jy/beam ! Combined flux in latest and established models = 0.28737 Jy keep ! Adding 309 model components to the UV plane model. ! The established model now contains 430 components and 0.287369 Jy ![Exited script file: muppet] wmap "J2120+6642_S_2015_03_17_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.489 x 4.948 at -33.9 degrees (North through East) ! Clean map min=-0.0011971 max=0.14386 Jy/beam ! Writing clean map to FITS file: J2120+6642_S_2015_03_17_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.143856 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00016888 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.352185 0.352185 0.704371 1.40874 2.81748 5.63497 11.2699 22.5399 45.0797 90.1595 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.143 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.489 x 4.948 at -33.9 degrees (North through East) ! Clean map min=-0.0011971 max=0.14386 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2120+6642_S_2015_03_17_pus_uvs.log closed on Fri Dec 30 23:08:50 2016