! Started logfile: J2109-4110_S_2015_03_17_pus_uvs.log on Fri Dec 30 23:08:40 2016 obs J2109-4110_S_2015_03_17_pus_uva.fits ! Reading UV FITS file: J2109-4110_S_2015_03_17_pus_uva.fits ! AN table 1: 14 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.566667 visibilities/baseline/integration-bin. ! Found source: J2109-4110 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 330 lines of history. ! ! Reading 1428 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2109-4110_S_2015_03_17_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.578119Jy sigma=0.004422 ! Fit after self-cal, rms=0.570028Jy sigma=0.004362 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.213 mas, bmaj=6.607 mas, bpa=-2.201 degrees ! Estimated noise=3082.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.323292 Jy ! Component: 100 - total flux cleaned = 0.475476 Jy ! Total flux subtracted in 100 components = 0.475476 Jy ! Clean residual min=-0.041254 max=0.086830 Jy/beam ! Clean residual mean=-0.001408 rms=0.016525 Jy/beam ! Combined flux in latest and established models = 0.475476 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.475476 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.316144Jy sigma=0.002129 ! Fit after self-cal, rms=0.315780Jy sigma=0.002126 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.774 mas, bmaj=8.232 mas, bpa=-5.133 degrees ! Estimated noise=2603.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.173434 Jy ! Component: 100 - total flux cleaned = 0.257036 Jy ! Component: 150 - total flux cleaned = 0.299248 Jy ! Component: 200 - total flux cleaned = 0.320752 Jy ! Total flux subtracted in 200 components = 0.320752 Jy ! Clean residual min=-0.043107 max=0.091569 Jy/beam ! Clean residual mean=-0.002213 rms=0.016751 Jy/beam ! Combined flux in latest and established models = 0.796228 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 40 components and 0.796229 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.209003Jy sigma=0.001306 ! Fit after self-cal, rms=0.208832Jy sigma=0.001303 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.83 HN 1.00* KP 1.04 ! LA 0.90 MK 0.97 NL 1.36 OV 1.10 ! PT 0.95 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.91 HN 1.00* KP 1.00 ! LA 0.87 MK 1.02 NL 1.55 OV 1.14 ! PT 0.94 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.92 HN 1.00* KP 0.89 ! LA 0.72 MK 1.07 NL 1.76 OV 1.07 ! PT 0.93 SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 1.00* KP 0.87 ! LA 0.78 MK 1.01 NL 1.49 OV 1.15 ! PT 0.95 SC 0.92 ! ! ! Fit before self-cal, rms=0.208832Jy sigma=0.001303 ! Fit after self-cal, rms=0.162157Jy sigma=0.000951 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.802 mas, bmaj=8.193 mas, bpa=-4.766 degrees ! Estimated noise=2595.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-10, 126.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.049756 Jy ! Component: 100 - total flux cleaned = 0.0689516 Jy ! Component: 150 - total flux cleaned = 0.0802911 Jy ! Component: 200 - total flux cleaned = 0.0873725 Jy ! Total flux subtracted in 200 components = 0.0873725 Jy ! Clean residual min=-0.027970 max=0.020851 Jy/beam ! Clean residual mean=0.000233 rms=0.005011 Jy/beam ! Combined flux in latest and established models = 0.883601 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 61 components and 0.883601 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143647Jy sigma=0.000831 ! Fit after self-cal, rms=0.143014Jy sigma=0.000823 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143014Jy sigma=0.000823 ! Fit after self-cal, rms=0.137334Jy sigma=0.000809 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.806 mas, bmaj=8.213 mas, bpa=-4.82 degrees ! Estimated noise=2582.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0120246 Jy ! Component: 100 - total flux cleaned = 0.0140838 Jy ! Component: 150 - total flux cleaned = 0.0158207 Jy ! Component: 200 - total flux cleaned = 0.0163708 Jy ! Total flux subtracted in 200 components = 0.0163708 Jy ! Clean residual min=-0.011641 max=0.017542 Jy/beam ! Clean residual mean=0.000050 rms=0.003257 Jy/beam ! Combined flux in latest and established models = 0.899972 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 88 components and 0.899972 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135958Jy sigma=0.000800 ! Fit after self-cal, rms=0.135652Jy sigma=0.000799 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (9, -30.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104803 Jy ! Component: 100 - total flux cleaned = 0.0104632 Jy ! Component: 150 - total flux cleaned = 0.00971523 Jy ! Component: 200 - total flux cleaned = 0.00902339 Jy ! Total flux subtracted in 200 components = 0.00902339 Jy ! Clean residual min=-0.010310 max=0.009275 Jy/beam ! Clean residual mean=0.000148 rms=0.002652 Jy/beam ! Combined flux in latest and established models = 0.908995 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 106 components and 0.908995 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133383Jy sigma=0.000782 ! Fit after self-cal, rms=0.133281Jy sigma=0.000782 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133281Jy sigma=0.000782 ! Fit after self-cal, rms=0.130656Jy sigma=0.000779 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.779 mas, bmaj=8.159 mas, bpa=-4.825 degrees ! Estimated noise=2542.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00423288 Jy ! Component: 100 - total flux cleaned = 0.00464832 Jy ! Component: 150 - total flux cleaned = 0.00428856 Jy ! Component: 200 - total flux cleaned = 0.00380474 Jy ! Total flux subtracted in 200 components = 0.00380474 Jy ! Clean residual min=-0.007977 max=0.007951 Jy/beam ! Clean residual mean=0.000054 rms=0.002332 Jy/beam ! Combined flux in latest and established models = 0.9128 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 110 components and 0.9128 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130013Jy sigma=0.000774 ! Fit after self-cal, rms=0.129945Jy sigma=0.000774 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00054591 Jy ! Component: 100 - total flux cleaned = 0.000266564 Jy ! Component: 150 - total flux cleaned = -0.000107394 Jy ! Component: 200 - total flux cleaned = -0.000457132 Jy ! Total flux subtracted in 200 components = -0.000457132 Jy ! Clean residual min=-0.007645 max=0.007829 Jy/beam ! Clean residual mean=0.000051 rms=0.002255 Jy/beam ! Combined flux in latest and established models = 0.912343 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 114 components and 0.912343 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129668Jy sigma=0.000772 ! Fit after self-cal, rms=0.129656Jy sigma=0.000772 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129656Jy sigma=0.000772 ! Fit after self-cal, rms=0.128369Jy sigma=0.000771 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.171 mas, bmaj=30.59 mas, bpa=0.06064 degrees ! Estimated noise=3481.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000892326 Jy ! Component: 100 - total flux cleaned = 0.000638095 Jy ! Component: 150 - total flux cleaned = 0.000396207 Jy ! Component: 200 - total flux cleaned = 0.000161852 Jy ! Total flux subtracted in 200 components = 0.000161852 Jy ! Clean residual min=-0.009560 max=0.009595 Jy/beam ! Clean residual mean=0.000051 rms=0.003216 Jy/beam ! Combined flux in latest and established models = 0.912505 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 121 components and 0.912505 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128235Jy sigma=0.000771 ! Fit after self-cal, rms=0.128199Jy sigma=0.000771 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000121368 Jy ! Component: 100 - total flux cleaned = -0.00026589 Jy ! Component: 150 - total flux cleaned = -0.000336636 Jy ! Component: 200 - total flux cleaned = -0.000407019 Jy ! Total flux subtracted in 200 components = -0.000407019 Jy ! Clean residual min=-0.009799 max=0.009158 Jy/beam ! Clean residual mean=0.000043 rms=0.003183 Jy/beam ! Combined flux in latest and established models = 0.912098 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 126 components and 0.912098 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128122Jy sigma=0.000771 ! Fit after self-cal, rms=0.128111Jy sigma=0.000771 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.764 mas, bmaj=8.126 mas, bpa=-4.8 degrees ! Estimated noise=2520.85 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.764 x 8.126 at -4.8 degrees (North through East) ! Clean map min=-0.0088775 max=0.45407 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.198 mas, bmaj=6.534 mas, bpa=-1.617 degrees ! Estimated noise=3003.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.317201 Jy ! Component: 100 - total flux cleaned = 0.471441 Jy ! Component: 150 - total flux cleaned = 0.572484 Jy ! Component: 200 - total flux cleaned = 0.639915 Jy ! Total flux subtracted in 200 components = 0.639915 Jy ! Clean residual min=-0.024269 max=0.041341 Jy/beam ! Clean residual mean=-0.000747 rms=0.008657 Jy/beam ! Combined flux in latest and established models = 0.639915 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.639915 Jy ! Inverting map and beam ! Estimated beam: bmin=2.764 mas, bmaj=8.126 mas, bpa=-4.8 degrees ! Estimated noise=2520.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.5, -0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0816702 Jy ! Component: 100 - total flux cleaned = 0.133435 Jy ! Component: 150 - total flux cleaned = 0.170225 Jy ! Component: 200 - total flux cleaned = 0.197278 Jy ! Total flux subtracted in 200 components = 0.197278 Jy ! Clean residual min=-0.019581 max=0.018506 Jy/beam ! Clean residual mean=-0.000586 rms=0.004790 Jy/beam ! Combined flux in latest and established models = 0.837194 Jy ! Adding 67 model components to the UV plane model. ! The established model now contains 85 components and 0.837194 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.171 mas, bmaj=30.59 mas, bpa=0.06064 degrees ! Estimated noise=3481.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0330091 Jy ! Component: 100 - total flux cleaned = 0.0510312 Jy ! Component: 150 - total flux cleaned = 0.0611596 Jy ! Component: 200 - total flux cleaned = 0.0670462 Jy ! Total flux subtracted in 200 components = 0.0670462 Jy ! Clean residual min=-0.021677 max=0.009304 Jy/beam ! Clean residual mean=-0.000122 rms=0.003696 Jy/beam ! Combined flux in latest and established models = 0.90424 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00353662 Jy ! Component: 100 - total flux cleaned = 0.00569541 Jy ! Component: 150 - total flux cleaned = 0.00589 Jy ! Component: 200 - total flux cleaned = 0.00594488 Jy ! Total flux subtracted in 200 components = 0.00594488 Jy ! Clean residual min=-0.022381 max=0.010009 Jy/beam ! Clean residual mean=-0.000030 rms=0.003653 Jy/beam ! Combined flux in latest and established models = 0.910185 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 123 components and 0.910184 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.764 mas, bmaj=8.126 mas, bpa=-4.8 degrees ! Estimated noise=2520.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000859759 Jy ! Component: 100 - total flux cleaned = 0.00089335 Jy ! Component: 150 - total flux cleaned = 0.000723435 Jy ! Component: 200 - total flux cleaned = 0.000721694 Jy ! Total flux subtracted in 200 components = 0.000721694 Jy ! Clean residual min=-0.007516 max=0.007309 Jy/beam ! Clean residual mean=0.000008 rms=0.002056 Jy/beam ! Combined flux in latest and established models = 0.910906 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 137 components and 0.910906 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127545Jy sigma=0.000769 ! Fit after self-cal, rms=0.127507Jy sigma=0.000768 wmodel J2109-4110_S_2015_03_17_pus_map.mod ! Writing 137 model components to file: J2109-4110_S_2015_03_17_pus_map.mod wobs J2109-4110_S_2015_03_17_pus_uvs.fits ! Writing UV FITS file: J2109-4110_S_2015_03_17_pus_uvs.fits wwins J2109-4110_S_2015_03_17_pus_map.win ! wwins: Wrote 4 windows to J2109-4110_S_2015_03_17_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000998978 Jy ! Component: 100 - total flux cleaned = -0.00178753 Jy ! Component: 150 - total flux cleaned = -0.00250675 Jy ! Component: 200 - total flux cleaned = -0.00288876 Jy ! Component: 250 - total flux cleaned = -0.00351842 Jy ! Component: 300 - total flux cleaned = -0.00429181 Jy ! Component: 350 - total flux cleaned = -0.00495095 Jy ! Component: 400 - total flux cleaned = -0.00558482 Jy ! Component: 450 - total flux cleaned = -0.0063505 Jy ! Component: 500 - total flux cleaned = -0.00730515 Jy ! Component: 550 - total flux cleaned = -0.00787234 Jy ! Component: 600 - total flux cleaned = -0.00835596 Jy ! Component: 650 - total flux cleaned = -0.00895939 Jy ! Component: 700 - total flux cleaned = -0.00934939 Jy ! Component: 750 - total flux cleaned = -0.00966711 Jy ! Component: 800 - total flux cleaned = -0.00997557 Jy ! Component: 850 - total flux cleaned = -0.0102173 Jy ! Component: 900 - total flux cleaned = -0.0104517 Jy ! Component: 950 - total flux cleaned = -0.0105652 Jy ! Component: 1000 - total flux cleaned = -0.010677 Jy ! Component: 1050 - total flux cleaned = -0.0107862 Jy ! Component: 1100 - total flux cleaned = -0.0108934 Jy ! Component: 1150 - total flux cleaned = -0.0109985 Jy ! Component: 1200 - total flux cleaned = -0.0110503 Jy ! Component: 1250 - total flux cleaned = -0.0111522 Jy ! Component: 1300 - total flux cleaned = -0.0113993 Jy ! Component: 1350 - total flux cleaned = -0.0113988 Jy ! Component: 1400 - total flux cleaned = -0.0115429 Jy ! Component: 1450 - total flux cleaned = -0.0116832 Jy ! Component: 1500 - total flux cleaned = -0.0117292 Jy ! Component: 1550 - total flux cleaned = -0.0119564 Jy ! Component: 1600 - total flux cleaned = -0.0121356 Jy ! Component: 1650 - total flux cleaned = -0.0123117 Jy ! Component: 1700 - total flux cleaned = -0.0126591 Jy ! Component: 1750 - total flux cleaned = -0.012787 Jy ! Component: 1800 - total flux cleaned = -0.0129557 Jy ! Component: 1850 - total flux cleaned = -0.0131223 Jy ! Component: 1900 - total flux cleaned = -0.0133684 Jy ! Component: 1950 - total flux cleaned = -0.0134093 Jy ! Component: 2000 - total flux cleaned = -0.0136105 Jy ! Component: 2050 - total flux cleaned = -0.0136902 Jy ! Component: 2100 - total flux cleaned = -0.0138092 Jy ! Component: 2150 - total flux cleaned = -0.0139261 Jy ! Component: 2200 - total flux cleaned = -0.0140038 Jy ! Component: 2250 - total flux cleaned = -0.014196 Jy ! Component: 2300 - total flux cleaned = -0.0142721 Jy ! Component: 2350 - total flux cleaned = -0.0142721 Jy ! Component: 2400 - total flux cleaned = -0.0144225 Jy ! Component: 2450 - total flux cleaned = -0.0144595 Jy ! Component: 2500 - total flux cleaned = -0.0144962 Jy ! Component: 2550 - total flux cleaned = -0.014606 Jy ! Component: 2600 - total flux cleaned = -0.0147516 Jy ! Component: 2650 - total flux cleaned = -0.0148962 Jy ! Component: 2700 - total flux cleaned = -0.0149682 Jy ! Component: 2750 - total flux cleaned = -0.0150038 Jy ! Component: 2800 - total flux cleaned = -0.0150753 Jy ! Component: 2850 - total flux cleaned = -0.0151463 Jy ! Component: 2900 - total flux cleaned = -0.0151817 Jy ! Component: 2950 - total flux cleaned = -0.0152876 Jy ! Component: 3000 - total flux cleaned = -0.0153928 Jy ! Component: 3050 - total flux cleaned = -0.0154981 Jy ! Component: 3100 - total flux cleaned = -0.0156381 Jy ! Component: 3150 - total flux cleaned = -0.015743 Jy ! Component: 3200 - total flux cleaned = -0.0158474 Jy ! Component: 3250 - total flux cleaned = -0.0159867 Jy ! Component: 3300 - total flux cleaned = -0.0160215 Jy ! Component: 3350 - total flux cleaned = -0.0160913 Jy ! Component: 3400 - total flux cleaned = -0.0161264 Jy ! Component: 3450 - total flux cleaned = -0.0161963 Jy ! Component: 3500 - total flux cleaned = -0.0162313 Jy ! Component: 3550 - total flux cleaned = -0.0162312 Jy ! Component: 3600 - total flux cleaned = -0.0163362 Jy ! Component: 3650 - total flux cleaned = -0.0163363 Jy ! Component: 3700 - total flux cleaned = -0.0163363 Jy ! Component: 3750 - total flux cleaned = -0.0163716 Jy ! Component: 3800 - total flux cleaned = -0.0164068 Jy ! Component: 3850 - total flux cleaned = -0.0164068 Jy ! Component: 3900 - total flux cleaned = -0.0163355 Jy ! Component: 3950 - total flux cleaned = -0.0163713 Jy ! Component: 4000 - total flux cleaned = -0.0163352 Jy ! Component: 4050 - total flux cleaned = -0.016299 Jy ! Total flux subtracted in 4096 components = -0.0162989 Jy ! Clean residual min=-0.002340 max=0.002385 Jy/beam ! Clean residual mean=0.000013 rms=0.000638 Jy/beam ! Combined flux in latest and established models = 0.894607 Jy keep ! Adding 249 model components to the UV plane model. ! The established model now contains 386 components and 0.894607 Jy ![Exited script file: muppet] wmap "J2109-4110_S_2015_03_17_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.764 x 8.126 at -4.8 degrees (North through East) ! Clean map min=-0.0055915 max=0.4791 Jy/beam ! Writing clean map to FITS file: J2109-4110_S_2015_03_17_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.479099 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000673119 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.421491 0.421491 0.842982 1.68596 3.37193 6.74385 13.4877 26.9754 53.9508 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.479 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.764 x 8.126 at -4.8 degrees (North through East) ! Clean map min=-0.0055915 max=0.4791 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2109-4110_S_2015_03_17_pus_uvs.log closed on Fri Dec 30 23:08:44 2016