! Started logfile: J2102-3313_S_2015_03_17_pus_uvs.log on Fri Dec 30 23:08:30 2016 obs J2102-3313_S_2015_03_17_pus_uva.fits ! Reading UV FITS file: J2102-3313_S_2015_03_17_pus_uva.fits ! AN table 1: 171 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.529955 visibilities/baseline/integration-bin. ! Found source: J2102-3313 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 330 lines of history. ! ! Reading 16312 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2102-3313_S_2015_03_17_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 753 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 696 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 696 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 696 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.864711Jy sigma=0.006930 ! Fit after self-cal, rms=0.704084Jy sigma=0.005607 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.32 mas, bmaj=8.011 mas, bpa=-10.85 degrees ! Estimated noise=1210.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.213757 Jy ! Component: 100 - total flux cleaned = 0.292641 Jy ! Total flux subtracted in 100 components = 0.292641 Jy ! Clean residual min=-0.017392 max=0.039360 Jy/beam ! Clean residual mean=-0.000226 rms=0.006017 Jy/beam ! Combined flux in latest and established models = 0.292641 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.292641 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162233Jy sigma=0.001147 ! Fit after self-cal, rms=0.161953Jy sigma=0.001146 ! Inverting map ! Added new window around map position (3, -6.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0444113 Jy ! Component: 100 - total flux cleaned = 0.0749532 Jy ! Total flux subtracted in 100 components = 0.0749532 Jy ! Clean residual min=-0.014356 max=0.026675 Jy/beam ! Clean residual mean=-0.000142 rms=0.004122 Jy/beam ! Combined flux in latest and established models = 0.367594 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 45 components and 0.367594 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139429Jy sigma=0.000954 ! Fit after self-cal, rms=0.139212Jy sigma=0.000952 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.923 mas, bmaj=9.655 mas, bpa=-10.98 degrees ! Estimated noise=732.785 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, -3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0397736 Jy ! Component: 100 - total flux cleaned = 0.0644289 Jy ! Component: 150 - total flux cleaned = 0.080362 Jy ! Component: 200 - total flux cleaned = 0.0909636 Jy ! Total flux subtracted in 200 components = 0.0909636 Jy ! Clean residual min=-0.011722 max=0.011717 Jy/beam ! Clean residual mean=-0.000082 rms=0.003223 Jy/beam ! Combined flux in latest and established models = 0.458558 Jy ! Performing phase self-cal ! Adding 79 model components to the UV plane model. ! The established model now contains 115 components and 0.458558 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124557Jy sigma=0.000849 ! Fit after self-cal, rms=0.124387Jy sigma=0.000848 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.87 HN 1.23 KP 1.08 ! LA 0.97 MK 0.95 NL 0.93 OV 0.96 ! PT 1.06 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.87 HN 1.31 KP 1.07 ! LA 0.96 MK 1.01 NL 1.04 OV 1.00 ! PT 1.05 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.91 HN 1.26 KP 0.96 ! LA 0.80 MK 1.05 NL 1.12 OV 0.93 ! PT 1.03 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.92 HN 1.19 KP 0.93 ! LA 0.85 MK 1.06 NL 1.03 OV 0.99 ! PT 1.08 SC 0.98 ! ! ! Fit before self-cal, rms=0.124387Jy sigma=0.000848 ! Fit after self-cal, rms=0.120825Jy sigma=0.000789 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.975 mas, bmaj=9.672 mas, bpa=-11.01 degrees ! Estimated noise=738.021 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00572093 Jy ! Component: 100 - total flux cleaned = -0.00623196 Jy ! Component: 150 - total flux cleaned = -0.00666463 Jy ! Component: 200 - total flux cleaned = -0.00691754 Jy ! Total flux subtracted in 200 components = -0.00691754 Jy ! Clean residual min=-0.006642 max=0.005481 Jy/beam ! Clean residual mean=-0.000069 rms=0.001470 Jy/beam ! Combined flux in latest and established models = 0.45164 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 141 components and 0.45164 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120347Jy sigma=0.000785 ! Fit after self-cal, rms=0.120305Jy sigma=0.000785 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120305Jy sigma=0.000785 ! Fit after self-cal, rms=0.123646Jy sigma=0.000784 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.987 mas, bmaj=9.666 mas, bpa=-11.02 degrees ! Estimated noise=740.643 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00447617 Jy ! Component: 100 - total flux cleaned = -0.00557015 Jy ! Component: 150 - total flux cleaned = -0.00609906 Jy ! Component: 200 - total flux cleaned = -0.00632684 Jy ! Total flux subtracted in 200 components = -0.00632684 Jy ! Clean residual min=-0.005645 max=0.004821 Jy/beam ! Clean residual mean=-0.000062 rms=0.001274 Jy/beam ! Combined flux in latest and established models = 0.445313 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 150 components and 0.445313 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123253Jy sigma=0.000781 ! Fit after self-cal, rms=0.123272Jy sigma=0.000781 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000381712 Jy ! Component: 100 - total flux cleaned = -0.000378512 Jy ! Component: 150 - total flux cleaned = -0.000545845 Jy ! Component: 200 - total flux cleaned = -0.00069688 Jy ! Total flux subtracted in 200 components = -0.00069688 Jy ! Clean residual min=-0.005292 max=0.004802 Jy/beam ! Clean residual mean=-0.000062 rms=0.001236 Jy/beam ! Combined flux in latest and established models = 0.444616 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 156 components and 0.444616 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123143Jy sigma=0.000780 ! Fit after self-cal, rms=0.123136Jy sigma=0.000780 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123136Jy sigma=0.000780 ! Fit after self-cal, rms=0.128441Jy sigma=0.000777 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.994 mas, bmaj=9.661 mas, bpa=-11.13 degrees ! Estimated noise=741.969 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00279779 Jy ! Component: 100 - total flux cleaned = -0.00350738 Jy ! Component: 150 - total flux cleaned = -0.00401441 Jy ! Component: 200 - total flux cleaned = -0.00437134 Jy ! Total flux subtracted in 200 components = -0.00437134 Jy ! Clean residual min=-0.004700 max=0.003057 Jy/beam ! Clean residual mean=-0.000057 rms=0.000993 Jy/beam ! Combined flux in latest and established models = 0.440245 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 175 components and 0.440245 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128211Jy sigma=0.000775 ! Fit after self-cal, rms=0.128258Jy sigma=0.000775 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000255369 Jy ! Component: 100 - total flux cleaned = -0.000608928 Jy ! Component: 150 - total flux cleaned = -0.000797981 Jy ! Component: 200 - total flux cleaned = -0.000967951 Jy ! Total flux subtracted in 200 components = -0.000967951 Jy ! Clean residual min=-0.004397 max=0.002976 Jy/beam ! Clean residual mean=-0.000058 rms=0.000962 Jy/beam ! Combined flux in latest and established models = 0.439277 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 187 components and 0.439277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128194Jy sigma=0.000775 ! Fit after self-cal, rms=0.128196Jy sigma=0.000775 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128196Jy sigma=0.000775 ! Fit after self-cal, rms=0.131317Jy sigma=0.000774 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.029 mas, bmaj=23.98 mas, bpa=1.607 degrees ! Estimated noise=924.755 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00268655 Jy ! Component: 100 - total flux cleaned = -0.00394267 Jy ! Component: 150 - total flux cleaned = -0.00409445 Jy ! Component: 200 - total flux cleaned = -0.00412799 Jy ! Total flux subtracted in 200 components = -0.00412799 Jy ! Clean residual min=-0.004081 max=0.003162 Jy/beam ! Clean residual mean=-0.000101 rms=0.001178 Jy/beam ! Combined flux in latest and established models = 0.435149 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 202 components and 0.435149 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131282Jy sigma=0.000774 ! Fit after self-cal, rms=0.131305Jy sigma=0.000774 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.54636e-05 Jy ! Component: 100 - total flux cleaned = -3.18475e-05 Jy ! Component: 150 - total flux cleaned = -5.74914e-05 Jy ! Component: 200 - total flux cleaned = -8.08381e-05 Jy ! Total flux subtracted in 200 components = -8.08381e-05 Jy ! Clean residual min=-0.003961 max=0.003146 Jy/beam ! Clean residual mean=-0.000101 rms=0.001171 Jy/beam ! Combined flux in latest and established models = 0.435068 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 210 components and 0.435068 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131291Jy sigma=0.000774 ! Fit after self-cal, rms=0.131292Jy sigma=0.000774 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3 mas, bmaj=9.659 mas, bpa=-11.16 degrees ! Estimated noise=742.713 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3 x 9.659 at -11.16 degrees (North through East) ! Clean map min=-0.0036907 max=0.28328 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.36 mas, bmaj=7.898 mas, bpa=-10.84 degrees ! Estimated noise=1252.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.220139 Jy ! Component: 100 - total flux cleaned = 0.29948 Jy ! Component: 150 - total flux cleaned = 0.339458 Jy ! Component: 200 - total flux cleaned = 0.364136 Jy ! Total flux subtracted in 200 components = 0.364136 Jy ! Clean residual min=-0.008097 max=0.013520 Jy/beam ! Clean residual mean=-0.000124 rms=0.002651 Jy/beam ! Combined flux in latest and established models = 0.364136 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 49 model components to the UV plane model. ! The established model now contains 49 components and 0.364136 Jy ! Inverting map and beam ! Estimated beam: bmin=3 mas, bmaj=9.659 mas, bpa=-11.16 degrees ! Estimated noise=742.713 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0257653 Jy ! Component: 100 - total flux cleaned = 0.0407268 Jy ! Component: 150 - total flux cleaned = 0.0500668 Jy ! Component: 200 - total flux cleaned = 0.0562294 Jy ! Total flux subtracted in 200 components = 0.0562294 Jy ! Clean residual min=-0.003471 max=0.003969 Jy/beam ! Clean residual mean=-0.000065 rms=0.001067 Jy/beam ! Combined flux in latest and established models = 0.420365 Jy ! Adding 102 model components to the UV plane model. ! The established model now contains 141 components and 0.420365 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.029 mas, bmaj=23.98 mas, bpa=1.607 degrees ! Estimated noise=924.755 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00639073 Jy ! Component: 100 - total flux cleaned = 0.00960135 Jy ! Component: 150 - total flux cleaned = 0.0114193 Jy ! Component: 200 - total flux cleaned = 0.0125287 Jy ! Total flux subtracted in 200 components = 0.0125287 Jy ! Clean residual min=-0.004144 max=0.003429 Jy/beam ! Clean residual mean=-0.000109 rms=0.001209 Jy/beam ! Combined flux in latest and established models = 0.432894 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000424508 Jy ! Component: 100 - total flux cleaned = 0.000579578 Jy ! Component: 150 - total flux cleaned = 0.00065446 Jy ! Component: 200 - total flux cleaned = 0.000726099 Jy ! Total flux subtracted in 200 components = 0.000726099 Jy ! Clean residual min=-0.004099 max=0.003397 Jy/beam ! Clean residual mean=-0.000107 rms=0.001198 Jy/beam ! Combined flux in latest and established models = 0.43362 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 191 components and 0.43362 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3 mas, bmaj=9.659 mas, bpa=-11.16 degrees ! Estimated noise=742.713 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000108985 Jy ! Component: 100 - total flux cleaned = 0.000152307 Jy ! Component: 150 - total flux cleaned = 0.000192179 Jy ! Component: 200 - total flux cleaned = 0.000193787 Jy ! Total flux subtracted in 200 components = 0.000193787 Jy ! Clean residual min=-0.003572 max=0.003131 Jy/beam ! Clean residual mean=-0.000052 rms=0.000848 Jy/beam ! Combined flux in latest and established models = 0.433814 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 212 components and 0.433814 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131163Jy sigma=0.000773 ! Fit after self-cal, rms=0.131181Jy sigma=0.000773 wmodel J2102-3313_S_2015_03_17_pus_map.mod ! Writing 212 model components to file: J2102-3313_S_2015_03_17_pus_map.mod wobs J2102-3313_S_2015_03_17_pus_uvs.fits ! Writing UV FITS file: J2102-3313_S_2015_03_17_pus_uvs.fits wwins J2102-3313_S_2015_03_17_pus_map.win ! wwins: Wrote 3 windows to J2102-3313_S_2015_03_17_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00140686 Jy ! Component: 100 - total flux cleaned = -0.00242698 Jy ! Component: 150 - total flux cleaned = -0.0031645 Jy ! Component: 200 - total flux cleaned = -0.00356545 Jy ! Component: 250 - total flux cleaned = -0.0039507 Jy ! Component: 300 - total flux cleaned = -0.00408828 Jy ! Component: 350 - total flux cleaned = -0.00426632 Jy ! Component: 400 - total flux cleaned = -0.00435241 Jy ! Component: 450 - total flux cleaned = -0.00460478 Jy ! Component: 500 - total flux cleaned = -0.00484996 Jy ! Component: 550 - total flux cleaned = -0.00516716 Jy ! Component: 600 - total flux cleaned = -0.0054758 Jy ! Component: 650 - total flux cleaned = -0.00577572 Jy ! Component: 700 - total flux cleaned = -0.00592242 Jy ! Component: 750 - total flux cleaned = -0.00620856 Jy ! Component: 800 - total flux cleaned = -0.00652273 Jy ! Component: 850 - total flux cleaned = -0.00686526 Jy ! Component: 900 - total flux cleaned = -0.00723391 Jy ! Component: 950 - total flux cleaned = -0.00749615 Jy ! Component: 1000 - total flux cleaned = -0.0076573 Jy ! Component: 1050 - total flux cleaned = -0.00794234 Jy ! Component: 1100 - total flux cleaned = -0.00822145 Jy ! Component: 1150 - total flux cleaned = -0.00837394 Jy ! Component: 1200 - total flux cleaned = -0.00852377 Jy ! Component: 1250 - total flux cleaned = -0.00872964 Jy ! Component: 1300 - total flux cleaned = -0.00884562 Jy ! Component: 1350 - total flux cleaned = -0.00910269 Jy ! Component: 1400 - total flux cleaned = -0.00924305 Jy ! Component: 1450 - total flux cleaned = -0.00946485 Jy ! Component: 1500 - total flux cleaned = -0.00957461 Jy ! Component: 1550 - total flux cleaned = -0.00979008 Jy ! Component: 1600 - total flux cleaned = -0.00992267 Jy ! Component: 1650 - total flux cleaned = -0.0101057 Jy ! Component: 1700 - total flux cleaned = -0.010209 Jy ! Component: 1750 - total flux cleaned = -0.0103367 Jy ! Component: 1800 - total flux cleaned = -0.0105129 Jy ! Component: 1850 - total flux cleaned = -0.0106867 Jy ! Component: 1900 - total flux cleaned = -0.0108089 Jy ! Component: 1950 - total flux cleaned = -0.0108818 Jy ! Component: 2000 - total flux cleaned = -0.0110496 Jy ! Component: 2050 - total flux cleaned = -0.0110736 Jy ! Component: 2100 - total flux cleaned = -0.0112141 Jy ! Component: 2150 - total flux cleaned = -0.0113063 Jy ! Component: 2200 - total flux cleaned = -0.0113294 Jy ! Component: 2250 - total flux cleaned = -0.0113974 Jy ! Component: 2300 - total flux cleaned = -0.0114647 Jy ! Component: 2350 - total flux cleaned = -0.0115308 Jy ! Component: 2400 - total flux cleaned = -0.0115089 Jy ! Component: 2450 - total flux cleaned = -0.0115953 Jy ! Component: 2500 - total flux cleaned = -0.0116166 Jy ! Component: 2550 - total flux cleaned = -0.0116377 Jy ! Component: 2600 - total flux cleaned = -0.0117001 Jy ! Component: 2650 - total flux cleaned = -0.0116999 Jy ! Component: 2700 - total flux cleaned = -0.0117411 Jy ! Component: 2750 - total flux cleaned = -0.011741 Jy ! Component: 2800 - total flux cleaned = -0.0118221 Jy ! Component: 2850 - total flux cleaned = -0.0118821 Jy ! Component: 2900 - total flux cleaned = -0.0119214 Jy ! Component: 2950 - total flux cleaned = -0.0119215 Jy ! Component: 3000 - total flux cleaned = -0.0119215 Jy ! Component: 3050 - total flux cleaned = -0.0119603 Jy ! Component: 3100 - total flux cleaned = -0.0119798 Jy ! Component: 3150 - total flux cleaned = -0.0120179 Jy ! Component: 3200 - total flux cleaned = -0.0120177 Jy ! Component: 3250 - total flux cleaned = -0.0120365 Jy ! Component: 3300 - total flux cleaned = -0.0120737 Jy ! Component: 3350 - total flux cleaned = -0.0120921 Jy ! Component: 3400 - total flux cleaned = -0.0121106 Jy ! Component: 3450 - total flux cleaned = -0.0121832 Jy ! Component: 3500 - total flux cleaned = -0.0121471 Jy ! Component: 3550 - total flux cleaned = -0.0121469 Jy ! Component: 3600 - total flux cleaned = -0.0122183 Jy ! Component: 3650 - total flux cleaned = -0.0122007 Jy ! Component: 3700 - total flux cleaned = -0.0121831 Jy ! Component: 3750 - total flux cleaned = -0.0122181 Jy ! Component: 3800 - total flux cleaned = -0.0122355 Jy ! Component: 3850 - total flux cleaned = -0.0123046 Jy ! Component: 3900 - total flux cleaned = -0.0122703 Jy ! Component: 3950 - total flux cleaned = -0.0123383 Jy ! Component: 4000 - total flux cleaned = -0.0123213 Jy ! Component: 4050 - total flux cleaned = -0.0123548 Jy ! Total flux subtracted in 4096 components = -0.012338 Jy ! Clean residual min=-0.000966 max=0.000941 Jy/beam ! Clean residual mean=-0.000010 rms=0.000332 Jy/beam ! Combined flux in latest and established models = 0.421476 Jy keep ! Adding 332 model components to the UV plane model. ! The established model now contains 544 components and 0.421476 Jy ![Exited script file: muppet] wmap "J2102-3313_S_2015_03_17_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3 x 9.659 at -11.16 degrees (North through East) ! Clean map min=-0.0020975 max=0.29176 Jy/beam ! Writing clean map to FITS file: J2102-3313_S_2015_03_17_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.291762 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000318092 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.327073 0.327073 0.654147 1.30829 2.61659 5.23317 10.4663 20.9327 41.8654 83.7308 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.291 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3 x 9.659 at -11.16 degrees (North through East) ! Clean map min=-0.0020975 max=0.29176 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2102-3313_S_2015_03_17_pus_uvs.log closed on Fri Dec 30 23:08:35 2016