! Started logfile: J1743-0350_S_2015_03_17_pus_uvs.log on Fri Dec 30 23:06:28 2016 obs J1743-0350_S_2015_03_17_pus_uva.fits ! Reading UV FITS file: J1743-0350_S_2015_03_17_pus_uva.fits ! AN table 1: 13 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.133333 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1743-0350 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 330 lines of history. ! ! Reading 312 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1743-0350_S_2015_03_17_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 78 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 78 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 78 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 78 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.671744Jy sigma=0.020621 ! Fit after self-cal, rms=1.623901Jy sigma=0.020131 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.707 mas, bmaj=4.989 mas, bpa=2.539 degrees ! Estimated noise=3795.27 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.85748 Jy ! Component: 100 - total flux cleaned = 2.1679 Jy ! Total flux subtracted in 100 components = 2.1679 Jy ! Clean residual min=-0.190207 max=0.193455 Jy/beam ! Clean residual mean=0.000193 rms=0.062163 Jy/beam ! Combined flux in latest and established models = 2.1679 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 2.1679 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.543054Jy sigma=0.006687 ! Fit after self-cal, rms=0.543009Jy sigma=0.006687 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.985 mas, bmaj=4.996 mas, bpa=2.761 degrees ! Estimated noise=3253.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.231286 Jy ! Component: 100 - total flux cleaned = 0.353616 Jy ! Component: 150 - total flux cleaned = 0.457308 Jy ! Component: 200 - total flux cleaned = 0.497472 Jy ! Total flux subtracted in 200 components = 0.497472 Jy ! Clean residual min=-0.064756 max=0.063778 Jy/beam ! Clean residual mean=0.000261 rms=0.038545 Jy/beam ! Combined flux in latest and established models = 2.66537 Jy ! Performing phase self-cal ! Adding 76 model components to the UV plane model. ! The established model now contains 80 components and 2.66538 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.188516Jy sigma=0.002248 ! Fit after self-cal, rms=0.188445Jy sigma=0.002247 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.04 NL 1.00* OV 0.94 ! PT 1.00* SC 1.04 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.03 NL 1.00* OV 0.98 ! PT 1.00* SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.08 NL 1.00* OV 0.91 ! PT 1.00* SC 1.07 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 0.98 NL 1.00* OV 1.00 ! PT 1.00* SC 1.01 ! ! ! Fit before self-cal, rms=0.188445Jy sigma=0.002247 ! Fit after self-cal, rms=0.087674Jy sigma=0.000987 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.021 mas, bmaj=4.995 mas, bpa=2.772 degrees ! Estimated noise=3205.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0323229 Jy ! Component: 100 - total flux cleaned = 0.0353181 Jy ! Component: 150 - total flux cleaned = 0.0393062 Jy ! Component: 200 - total flux cleaned = 0.0410716 Jy ! Total flux subtracted in 200 components = 0.0410716 Jy ! Clean residual min=-0.009472 max=0.009361 Jy/beam ! Clean residual mean=0.000004 rms=0.004125 Jy/beam ! Combined flux in latest and established models = 2.70645 Jy ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 135 components and 2.70645 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067695Jy sigma=0.000784 ! Fit after self-cal, rms=0.067716Jy sigma=0.000783 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067716Jy sigma=0.000783 ! Fit after self-cal, rms=0.064179Jy sigma=0.000754 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.017 mas, bmaj=4.994 mas, bpa=2.773 degrees ! Estimated noise=3197.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0133346 Jy ! Component: 100 - total flux cleaned = 0.0175981 Jy ! Component: 150 - total flux cleaned = 0.019889 Jy ! Component: 200 - total flux cleaned = 0.0213866 Jy ! Total flux subtracted in 200 components = 0.0213866 Jy ! Clean residual min=-0.004635 max=0.004630 Jy/beam ! Clean residual mean=0.000003 rms=0.001993 Jy/beam ! Combined flux in latest and established models = 2.72783 Jy selfcal ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 181 components and 2.72783 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059976Jy sigma=0.000711 ! Fit after self-cal, rms=0.059958Jy sigma=0.000711 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000361834 Jy ! Component: 100 - total flux cleaned = 0.000581544 Jy ! Component: 150 - total flux cleaned = 0.000580727 Jy ! Component: 200 - total flux cleaned = 0.00119972 Jy ! Total flux subtracted in 200 components = 0.00119972 Jy ! Clean residual min=-0.002535 max=0.002522 Jy/beam ! Clean residual mean=-0.000001 rms=0.001352 Jy/beam ! Combined flux in latest and established models = 2.72903 Jy ! Performing phase self-cal ! Adding 61 model components to the UV plane model. ! The established model now contains 237 components and 2.72903 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058912Jy sigma=0.000700 ! Fit after self-cal, rms=0.058907Jy sigma=0.000700 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058907Jy sigma=0.000700 ! Fit after self-cal, rms=0.058452Jy sigma=0.000695 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.016 mas, bmaj=4.995 mas, bpa=2.778 degrees ! Estimated noise=3195.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00503577 Jy ! Component: 100 - total flux cleaned = 0.00704964 Jy ! Component: 150 - total flux cleaned = 0.00777484 Jy ! Component: 200 - total flux cleaned = 0.00843132 Jy ! Total flux subtracted in 200 components = 0.00843132 Jy ! Clean residual min=-0.001746 max=0.001736 Jy/beam ! Clean residual mean=0.000001 rms=0.000781 Jy/beam ! Combined flux in latest and established models = 2.73747 Jy selfcal ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 275 components and 2.73747 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057801Jy sigma=0.000688 ! Fit after self-cal, rms=0.057799Jy sigma=0.000688 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000372017 Jy ! Component: 100 - total flux cleaned = 0.000600046 Jy ! Component: 150 - total flux cleaned = 0.00067097 Jy ! Component: 200 - total flux cleaned = 0.000671269 Jy ! Total flux subtracted in 200 components = 0.000671269 Jy ! Clean residual min=-0.001063 max=0.001060 Jy/beam ! Clean residual mean=-0.000000 rms=0.000549 Jy/beam ! Combined flux in latest and established models = 2.73814 Jy ! Performing phase self-cal ! Adding 61 model components to the UV plane model. ! The established model now contains 327 components and 2.73814 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057628Jy sigma=0.000687 ! Fit after self-cal, rms=0.057628Jy sigma=0.000687 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057628Jy sigma=0.000687 ! Fit after self-cal, rms=0.057544Jy sigma=0.000686 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.942 mas, bmaj=10.98 mas, bpa=-33.56 degrees ! Estimated noise=6146.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000912259 Jy ! Component: 100 - total flux cleaned = 0.000137006 Jy ! Component: 150 - total flux cleaned = -0.000702822 Jy ! Component: 200 - total flux cleaned = -0.00152759 Jy ! Total flux subtracted in 200 components = -0.00152759 Jy ! Clean residual min=-0.000788 max=0.000788 Jy/beam ! Clean residual mean=0.000002 rms=0.000369 Jy/beam ! Combined flux in latest and established models = 2.73661 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 357 components and 2.73661 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057532Jy sigma=0.000686 ! Fit after self-cal, rms=0.057531Jy sigma=0.000686 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000107641 Jy ! Component: 100 - total flux cleaned = 0.000115224 Jy ! Component: 150 - total flux cleaned = 0.000264552 Jy ! Component: 200 - total flux cleaned = 0.000325064 Jy ! Total flux subtracted in 200 components = 0.000325064 Jy ! Clean residual min=-0.001149 max=0.001145 Jy/beam ! Clean residual mean=-0.000001 rms=0.000643 Jy/beam ! Combined flux in latest and established models = 2.73693 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 402 components and 2.73694 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057529Jy sigma=0.000686 ! Fit after self-cal, rms=0.057529Jy sigma=0.000686 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.016 mas, bmaj=4.995 mas, bpa=2.781 degrees ! Estimated noise=3194.16 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.016 x 4.995 at 2.781 degrees (North through East) ! Clean map min=-0.047867 max=2.2144 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057529Jy sigma=0.000686 ! Fit after self-cal, rms=0.043877Jy sigma=0.000501 ! Inverting map and beam ! Estimated beam: bmin=2.016 mas, bmaj=4.995 mas, bpa=2.781 degrees ! Estimated noise=3193.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00189926 Jy ! Component: 100 - total flux cleaned = 0.00276672 Jy ! Component: 150 - total flux cleaned = 0.00318615 Jy ! Component: 200 - total flux cleaned = 0.00357104 Jy ! Total flux subtracted in 200 components = 0.00357104 Jy ! Clean residual min=-0.000674 max=0.000681 Jy/beam ! Clean residual mean=0.000000 rms=0.000281 Jy/beam ! Combined flux in latest and established models = 2.74051 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 444 components and 2.74051 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.043755Jy sigma=0.000499 ! Fit after self-cal, rms=0.043755Jy sigma=0.000499 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000123052 Jy ! Component: 100 - total flux cleaned = 3.95768e-05 Jy ! Component: 150 - total flux cleaned = 3.76328e-05 Jy ! Component: 200 - total flux cleaned = 8.52553e-05 Jy ! Total flux subtracted in 200 components = 8.52553e-05 Jy ! Clean residual min=-0.000391 max=0.000387 Jy/beam ! Clean residual mean=-0.000000 rms=0.000191 Jy/beam ! Combined flux in latest and established models = 2.74059 Jy ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 482 components and 2.74059 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.043723Jy sigma=0.000499 ! Fit after self-cal, rms=0.043723Jy sigma=0.000499 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.043723Jy sigma=0.000499 ! Fit after self-cal, rms=0.043706Jy sigma=0.000499 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.732 mas, bmaj=4.952 mas, bpa=2.526 degrees ! Estimated noise=3793.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.85639 Jy ! Component: 100 - total flux cleaned = 2.22987 Jy ! Component: 150 - total flux cleaned = 2.28967 Jy ! Component: 200 - total flux cleaned = 2.36485 Jy ! Total flux subtracted in 200 components = 2.36485 Jy ! Clean residual min=-0.068007 max=0.068161 Jy/beam ! Clean residual mean=0.000098 rms=0.026586 Jy/beam ! Combined flux in latest and established models = 2.36485 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 2.36485 Jy ! Inverting map and beam ! Estimated beam: bmin=2.016 mas, bmaj=4.995 mas, bpa=2.781 degrees ! Estimated noise=3193.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0635067 Jy ! Component: 100 - total flux cleaned = 0.108354 Jy ! Component: 150 - total flux cleaned = 0.147116 Jy ! Component: 200 - total flux cleaned = 0.154242 Jy ! Total flux subtracted in 200 components = 0.154242 Jy ! Clean residual min=-0.036380 max=0.036172 Jy/beam ! Clean residual mean=0.000129 rms=0.020150 Jy/beam ! Combined flux in latest and established models = 2.51909 Jy ! Adding 91 model components to the UV plane model. ! The established model now contains 115 components and 2.51909 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.941 mas, bmaj=10.98 mas, bpa=-33.56 degrees ! Estimated noise=6147.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0334012 Jy ! Component: 100 - total flux cleaned = -0.0289896 Jy ! Component: 150 - total flux cleaned = -0.0825203 Jy ! Component: 200 - total flux cleaned = -0.116062 Jy ! Total flux subtracted in 200 components = -0.116062 Jy ! Clean residual min=-0.056507 max=0.056259 Jy/beam ! Clean residual mean=0.000124 rms=0.028816 Jy/beam ! Combined flux in latest and established models = 2.40303 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0460826 Jy ! Component: 100 - total flux cleaned = -0.0979562 Jy ! Component: 150 - total flux cleaned = -0.166254 Jy ! Component: 200 - total flux cleaned = -0.26556 Jy ! Total flux subtracted in 200 components = -0.26556 Jy ! Clean residual min=-0.172133 max=0.172835 Jy/beam ! Clean residual mean=0.000258 rms=0.089509 Jy/beam ! Combined flux in latest and established models = 2.13747 Jy ! Adding 79 model components to the UV plane model. ! The established model now contains 193 components and 2.13747 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.016 mas, bmaj=4.995 mas, bpa=2.781 degrees ! Estimated noise=3193.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.143729 Jy ! Component: 100 - total flux cleaned = 0.177701 Jy ! Component: 150 - total flux cleaned = 0.200073 Jy ! Component: 200 - total flux cleaned = 0.217901 Jy ! Total flux subtracted in 200 components = 0.217901 Jy ! Clean residual min=-0.059882 max=0.059783 Jy/beam ! Clean residual mean=-0.000144 rms=0.014879 Jy/beam ! Combined flux in latest and established models = 2.35537 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 219 components and 2.35537 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093244Jy sigma=0.001167 ! Fit after self-cal, rms=0.091929Jy sigma=0.001152 wmodel J1743-0350_S_2015_03_17_pus_map.mod ! Writing 219 model components to file: J1743-0350_S_2015_03_17_pus_map.mod wobs J1743-0350_S_2015_03_17_pus_uvs.fits ! Writing UV FITS file: J1743-0350_S_2015_03_17_pus_uvs.fits wwins J1743-0350_S_2015_03_17_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J1743-0350_S_2015_03_17_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.016 x 4.995 at 2.781 degrees (North through East) ! Clean map min=-0.07556 max=2.2044 Jy/beam ! Writing clean map to FITS file: J1743-0350_S_2015_03_17_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 2.20442 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0146462 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.9932 1.9932 3.9864 7.9728 15.9456 31.8912 63.7824 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0439 print "peak=",int(1000*peak_flux)/1000 ! peak= 2.204 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.016 x 4.995 at 2.781 degrees (North through East) ! Clean map min=-0.07556 max=2.2044 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1743-0350_S_2015_03_17_pus_uvs.log closed on Fri Dec 30 23:06:31 2016