! Started logfile: J1729-2657_S_2015_03_17_pus_uvs.log on Fri Dec 30 23:05:51 2016 obs J1729-2657_S_2015_03_17_pus_uva.fits ! Reading UV FITS file: J1729-2657_S_2015_03_17_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.887524 visibilities/baseline/integration-bin. ! Found source: J1729-2657 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 330 lines of history. ! ! Reading 18212 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1729-2657_S_2015_03_17_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.952172Jy sigma=0.008549 ! Fit after self-cal, rms=0.912966Jy sigma=0.008221 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.378 mas, bmaj=6.337 mas, bpa=-5.011 degrees ! Estimated noise=937.237 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0547004 Jy ! Component: 100 - total flux cleaned = 0.0840458 Jy ! Total flux subtracted in 100 components = 0.0840458 Jy ! Clean residual min=-0.006407 max=0.018319 Jy/beam ! Clean residual mean=-0.000050 rms=0.002628 Jy/beam ! Combined flux in latest and established models = 0.0840458 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 43 components and 0.0840458 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115690Jy sigma=0.000960 ! Fit after self-cal, rms=0.114962Jy sigma=0.000955 ! Inverting map ! Added new window around map position (3, 1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.022091 Jy ! Component: 100 - total flux cleaned = 0.0379961 Jy ! Total flux subtracted in 100 components = 0.0379961 Jy ! Clean residual min=-0.005694 max=0.012914 Jy/beam ! Clean residual mean=-0.000036 rms=0.001882 Jy/beam ! Combined flux in latest and established models = 0.122042 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 73 components and 0.122042 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105023Jy sigma=0.000863 ! Fit after self-cal, rms=0.104670Jy sigma=0.000861 ! Inverting map ! Added new window around map position (-3.5, -0.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0146123 Jy ! Component: 100 - total flux cleaned = 0.0253886 Jy ! Total flux subtracted in 100 components = 0.0253886 Jy ! Clean residual min=-0.005015 max=0.007866 Jy/beam ! Clean residual mean=-0.000027 rms=0.001456 Jy/beam ! Combined flux in latest and established models = 0.14743 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 107 components and 0.14743 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099854Jy sigma=0.000818 ! Fit after self-cal, rms=0.099707Jy sigma=0.000817 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.931 mas, bmaj=7.6 mas, bpa=-5.507 degrees ! Estimated noise=594.539 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0189736 Jy ! Component: 100 - total flux cleaned = 0.0315576 Jy ! Component: 150 - total flux cleaned = 0.0401949 Jy ! Component: 200 - total flux cleaned = 0.0461654 Jy ! Total flux subtracted in 200 components = 0.0461654 Jy ! Clean residual min=-0.004241 max=0.007686 Jy/beam ! Clean residual mean=-0.000033 rms=0.001416 Jy/beam ! Combined flux in latest and established models = 0.193596 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 140 components and 0.193596 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094995Jy sigma=0.000778 ! Fit after self-cal, rms=0.094752Jy sigma=0.000777 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.85 HN 0.90 KP 1.06 ! LA 0.91 MK 0.87 NL 1.12 OV 1.02 ! PT 1.02 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 0.90 HN 0.96 KP 1.04 ! LA 0.90 MK 0.89 NL 1.21 OV 1.04 ! PT 0.96 SC 0.94 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.91 HN 0.89 KP 0.93 ! LA 0.75 MK 0.97 NL 1.22 OV 0.99 ! PT 0.97 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.23 FD 0.95 HN 0.95 KP 0.89 ! LA 0.82 MK 0.95 NL 1.18 OV 1.01 ! PT 1.02 SC 0.91 ! ! ! Fit before self-cal, rms=0.094752Jy sigma=0.000777 ! Fit after self-cal, rms=0.088650Jy sigma=0.000763 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.877 mas, bmaj=7.557 mas, bpa=-5.745 degrees ! Estimated noise=569.611 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00120924 Jy ! Component: 100 - total flux cleaned = 0.00141503 Jy ! Component: 150 - total flux cleaned = 0.0016335 Jy ! Component: 200 - total flux cleaned = 0.0017893 Jy ! Total flux subtracted in 200 components = 0.0017893 Jy ! Clean residual min=-0.002909 max=0.003786 Jy/beam ! Clean residual mean=-0.000003 rms=0.000733 Jy/beam ! Combined flux in latest and established models = 0.195385 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 149 components and 0.195385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088592Jy sigma=0.000763 ! Fit after self-cal, rms=0.088622Jy sigma=0.000762 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088622Jy sigma=0.000762 ! Fit after self-cal, rms=0.088036Jy sigma=0.000761 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.856 mas, bmaj=7.539 mas, bpa=-5.738 degrees ! Estimated noise=565.175 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000650871 Jy ! Component: 100 - total flux cleaned = 0.000878339 Jy ! Component: 150 - total flux cleaned = 0.00104405 Jy ! Component: 200 - total flux cleaned = 0.00113358 Jy ! Total flux subtracted in 200 components = 0.00113358 Jy ! Clean residual min=-0.002587 max=0.003255 Jy/beam ! Clean residual mean=-0.000006 rms=0.000671 Jy/beam ! Combined flux in latest and established models = 0.196519 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 153 components and 0.196519 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088006Jy sigma=0.000761 ! Fit after self-cal, rms=0.088007Jy sigma=0.000761 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (8.5, -6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00310549 Jy ! Component: 100 - total flux cleaned = 0.00447541 Jy ! Component: 150 - total flux cleaned = 0.00502831 Jy ! Component: 200 - total flux cleaned = 0.00529145 Jy ! Total flux subtracted in 200 components = 0.00529145 Jy ! Clean residual min=-0.002190 max=0.002762 Jy/beam ! Clean residual mean=-0.000000 rms=0.000592 Jy/beam ! Combined flux in latest and established models = 0.20181 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 191 components and 0.20181 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087875Jy sigma=0.000760 ! Fit after self-cal, rms=0.087864Jy sigma=0.000760 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087864Jy sigma=0.000760 ! Fit after self-cal, rms=0.086867Jy sigma=0.000759 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.844 mas, bmaj=7.507 mas, bpa=-5.825 degrees ! Estimated noise=560.025 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00189558 Jy ! Component: 100 - total flux cleaned = 0.00268751 Jy ! Component: 150 - total flux cleaned = 0.0029235 Jy ! Component: 200 - total flux cleaned = 0.00307449 Jy ! Total flux subtracted in 200 components = 0.00307449 Jy ! Clean residual min=-0.001958 max=0.002540 Jy/beam ! Clean residual mean=-0.000003 rms=0.000524 Jy/beam ! Combined flux in latest and established models = 0.204885 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 205 components and 0.204885 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086813Jy sigma=0.000759 ! Fit after self-cal, rms=0.086795Jy sigma=0.000759 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-11.5, 9.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00218216 Jy ! Component: 100 - total flux cleaned = 0.00345463 Jy ! Component: 150 - total flux cleaned = 0.00391445 Jy ! Component: 200 - total flux cleaned = 0.00419999 Jy ! Total flux subtracted in 200 components = 0.00419999 Jy ! Clean residual min=-0.001867 max=0.001789 Jy/beam ! Clean residual mean=0.000001 rms=0.000473 Jy/beam ! Combined flux in latest and established models = 0.209085 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 226 components and 0.209085 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086730Jy sigma=0.000758 ! Fit after self-cal, rms=0.086730Jy sigma=0.000758 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086730Jy sigma=0.000758 ! Fit after self-cal, rms=0.085576Jy sigma=0.000757 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.923 mas, bmaj=18.83 mas, bpa=-0.225 degrees ! Estimated noise=772.466 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00193211 Jy ! Component: 100 - total flux cleaned = 0.00287771 Jy ! Component: 150 - total flux cleaned = 0.00307401 Jy ! Component: 200 - total flux cleaned = 0.0030737 Jy ! Total flux subtracted in 200 components = 0.0030737 Jy ! Clean residual min=-0.002503 max=0.002300 Jy/beam ! Clean residual mean=0.000006 rms=0.000660 Jy/beam ! Combined flux in latest and established models = 0.212158 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 247 components and 0.212158 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085549Jy sigma=0.000757 ! Fit after self-cal, rms=0.085552Jy sigma=0.000757 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000136189 Jy ! Component: 100 - total flux cleaned = 7.06179e-05 Jy ! Component: 150 - total flux cleaned = 3.06334e-05 Jy ! Component: 200 - total flux cleaned = -2.57581e-05 Jy ! Total flux subtracted in 200 components = -2.57581e-05 Jy ! Clean residual min=-0.002375 max=0.002283 Jy/beam ! Clean residual mean=0.000006 rms=0.000656 Jy/beam ! Combined flux in latest and established models = 0.212133 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 258 components and 0.212133 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085547Jy sigma=0.000757 ! Fit after self-cal, rms=0.085542Jy sigma=0.000757 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.833 mas, bmaj=7.458 mas, bpa=-5.891 degrees ! Estimated noise=554.704 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.833 x 7.458 at -5.891 degrees (North through East) ! Clean map min=-0.0016857 max=0.058489 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.308 mas, bmaj=6.26 mas, bpa=-5.208 degrees ! Estimated noise=857.844 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0506063 Jy ! Component: 100 - total flux cleaned = 0.0811944 Jy ! Component: 150 - total flux cleaned = 0.103257 Jy ! Component: 200 - total flux cleaned = 0.120095 Jy ! Total flux subtracted in 200 components = 0.120095 Jy ! Clean residual min=-0.004252 max=0.009933 Jy/beam ! Clean residual mean=-0.000031 rms=0.001649 Jy/beam ! Combined flux in latest and established models = 0.120095 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 56 model components to the UV plane model. ! The established model now contains 56 components and 0.120095 Jy ! Inverting map and beam ! Estimated beam: bmin=2.833 mas, bmaj=7.458 mas, bpa=-5.891 degrees ! Estimated noise=554.704 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0255528 Jy ! Component: 100 - total flux cleaned = 0.0420658 Jy ! Component: 150 - total flux cleaned = 0.0534028 Jy ! Component: 200 - total flux cleaned = 0.0615923 Jy ! Total flux subtracted in 200 components = 0.0615923 Jy ! Clean residual min=-0.003017 max=0.004818 Jy/beam ! Clean residual mean=-0.000029 rms=0.001075 Jy/beam ! Combined flux in latest and established models = 0.181687 Jy ! Adding 105 model components to the UV plane model. ! The established model now contains 151 components and 0.181687 Jy ! Inverting map ! Added new window around map position (3.5, 8.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00613796 Jy ! Component: 100 - total flux cleaned = 0.0109382 Jy ! Component: 150 - total flux cleaned = 0.0147386 Jy ! Component: 200 - total flux cleaned = 0.0177605 Jy ! Total flux subtracted in 200 components = 0.0177605 Jy ! Clean residual min=-0.002386 max=0.002350 Jy/beam ! Clean residual mean=-0.000010 rms=0.000584 Jy/beam ! Combined flux in latest and established models = 0.199448 Jy ! Adding 67 model components to the UV plane model. ! The established model now contains 206 components and 0.199448 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.923 mas, bmaj=18.83 mas, bpa=-0.225 degrees ! Estimated noise=772.466 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00444943 Jy ! Component: 100 - total flux cleaned = 0.00721156 Jy ! Component: 150 - total flux cleaned = 0.00901294 Jy ! Component: 200 - total flux cleaned = 0.0102429 Jy ! Total flux subtracted in 200 components = 0.0102429 Jy ! Clean residual min=-0.002833 max=0.002266 Jy/beam ! Clean residual mean=0.000000 rms=0.000696 Jy/beam ! Combined flux in latest and established models = 0.209691 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000866257 Jy ! Component: 100 - total flux cleaned = 0.00141172 Jy ! Component: 150 - total flux cleaned = 0.0016031 Jy ! Component: 200 - total flux cleaned = 0.00178916 Jy ! Total flux subtracted in 200 components = 0.00178916 Jy ! Clean residual min=-0.002626 max=0.002267 Jy/beam ! Clean residual mean=0.000004 rms=0.000668 Jy/beam ! Combined flux in latest and established models = 0.21148 Jy ! Adding 96 model components to the UV plane model. ! The established model now contains 286 components and 0.21148 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.833 mas, bmaj=7.458 mas, bpa=-5.891 degrees ! Estimated noise=554.704 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000292019 Jy ! Component: 100 - total flux cleaned = 0.000319109 Jy ! Component: 150 - total flux cleaned = 0.000318838 Jy ! Component: 200 - total flux cleaned = 0.000319592 Jy ! Total flux subtracted in 200 components = 0.000319592 Jy ! Clean residual min=-0.001915 max=0.001804 Jy/beam ! Clean residual mean=0.000002 rms=0.000421 Jy/beam ! Combined flux in latest and established models = 0.211799 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 310 components and 0.211799 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085538Jy sigma=0.000757 ! Fit after self-cal, rms=0.085505Jy sigma=0.000757 wmodel J1729-2657_S_2015_03_17_pus_map.mod ! Writing 310 model components to file: J1729-2657_S_2015_03_17_pus_map.mod wobs J1729-2657_S_2015_03_17_pus_uvs.fits ! Writing UV FITS file: J1729-2657_S_2015_03_17_pus_uvs.fits wwins J1729-2657_S_2015_03_17_pus_map.win ! wwins: Wrote 6 windows to J1729-2657_S_2015_03_17_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000422851 Jy ! Component: 100 - total flux cleaned = -0.000422781 Jy ! Component: 150 - total flux cleaned = -0.000450301 Jy ! Component: 200 - total flux cleaned = -0.000502506 Jy ! Component: 250 - total flux cleaned = -0.000503441 Jy ! Component: 300 - total flux cleaned = -0.00043196 Jy ! Component: 350 - total flux cleaned = -0.000386277 Jy ! Component: 400 - total flux cleaned = -0.00034197 Jy ! Component: 450 - total flux cleaned = -0.000320651 Jy ! Component: 500 - total flux cleaned = -0.000320559 Jy ! Component: 550 - total flux cleaned = -0.000361667 Jy ! Component: 600 - total flux cleaned = -0.000320828 Jy ! Component: 650 - total flux cleaned = -0.000360462 Jy ! Component: 700 - total flux cleaned = -0.00030209 Jy ! Component: 750 - total flux cleaned = -0.000283253 Jy ! Component: 800 - total flux cleaned = -0.000264781 Jy ! Component: 850 - total flux cleaned = -0.000264744 Jy ! Component: 900 - total flux cleaned = -0.000246338 Jy ! Component: 950 - total flux cleaned = -0.000210945 Jy ! Component: 1000 - total flux cleaned = -0.000124062 Jy ! Component: 1050 - total flux cleaned = -3.86166e-05 Jy ! Component: 1100 - total flux cleaned = 1.14985e-05 Jy ! Component: 1150 - total flux cleaned = 4.49368e-05 Jy ! Component: 1200 - total flux cleaned = 9.41091e-05 Jy ! Component: 1250 - total flux cleaned = 0.000158683 Jy ! Component: 1300 - total flux cleaned = 0.00019068 Jy ! Component: 1350 - total flux cleaned = 0.000222557 Jy ! Component: 1400 - total flux cleaned = 0.000315142 Jy ! Component: 1450 - total flux cleaned = 0.00033065 Jy ! Component: 1500 - total flux cleaned = 0.000405883 Jy ! Component: 1550 - total flux cleaned = 0.00042073 Jy ! Component: 1600 - total flux cleaned = 0.000494097 Jy ! Component: 1650 - total flux cleaned = 0.000493978 Jy ! Component: 1700 - total flux cleaned = 0.000536858 Jy ! Component: 1750 - total flux cleaned = 0.000578851 Jy ! Component: 1800 - total flux cleaned = 0.000606727 Jy ! Component: 1850 - total flux cleaned = 0.000703052 Jy ! Component: 1900 - total flux cleaned = 0.000757293 Jy ! Component: 1950 - total flux cleaned = 0.000730462 Jy ! Component: 2000 - total flux cleaned = 0.000757219 Jy ! Component: 2050 - total flux cleaned = 0.000836395 Jy ! Component: 2100 - total flux cleaned = 0.000901536 Jy ! Component: 2150 - total flux cleaned = 0.000927158 Jy ! Component: 2200 - total flux cleaned = 0.000965493 Jy ! Component: 2250 - total flux cleaned = 0.00102836 Jy ! Component: 2300 - total flux cleaned = 0.00101579 Jy ! Component: 2350 - total flux cleaned = 0.00105281 Jy ! Component: 2400 - total flux cleaned = 0.00112612 Jy ! Component: 2450 - total flux cleaned = 0.00112602 Jy ! Component: 2500 - total flux cleaned = 0.00109018 Jy ! Component: 2550 - total flux cleaned = 0.0011495 Jy ! Component: 2600 - total flux cleaned = 0.00118479 Jy ! Component: 2650 - total flux cleaned = 0.00118479 Jy ! Component: 2700 - total flux cleaned = 0.00120792 Jy ! Component: 2750 - total flux cleaned = 0.00125363 Jy ! Component: 2800 - total flux cleaned = 0.00125358 Jy ! Component: 2850 - total flux cleaned = 0.00126488 Jy ! Component: 2900 - total flux cleaned = 0.00130928 Jy ! Component: 2950 - total flux cleaned = 0.00134249 Jy ! Component: 3000 - total flux cleaned = 0.00134252 Jy ! Component: 3050 - total flux cleaned = 0.00134254 Jy ! Component: 3100 - total flux cleaned = 0.00135352 Jy ! Component: 3150 - total flux cleaned = 0.00135342 Jy ! Component: 3200 - total flux cleaned = 0.00137466 Jy ! Component: 3250 - total flux cleaned = 0.00136429 Jy ! Component: 3300 - total flux cleaned = 0.00138535 Jy ! Component: 3350 - total flux cleaned = 0.00139576 Jy ! Component: 3400 - total flux cleaned = 0.00141642 Jy ! Component: 3450 - total flux cleaned = 0.00140622 Jy ! Component: 3500 - total flux cleaned = 0.00139606 Jy ! Component: 3550 - total flux cleaned = 0.00140604 Jy ! Component: 3600 - total flux cleaned = 0.00138609 Jy ! Component: 3650 - total flux cleaned = 0.00131693 Jy ! Component: 3700 - total flux cleaned = 0.00132687 Jy ! Component: 3750 - total flux cleaned = 0.00131715 Jy ! Component: 3800 - total flux cleaned = 0.00123015 Jy ! Component: 3850 - total flux cleaned = 0.00124942 Jy ! Component: 3900 - total flux cleaned = 0.00118268 Jy ! Component: 3950 - total flux cleaned = 0.00116391 Jy ! Component: 4000 - total flux cleaned = 0.0011639 Jy ! Component: 4050 - total flux cleaned = 0.0011358 Jy ! Total flux subtracted in 4096 components = 0.00113581 Jy ! Clean residual min=-0.000543 max=0.000529 Jy/beam ! Clean residual mean=0.000003 rms=0.000177 Jy/beam ! Combined flux in latest and established models = 0.212935 Jy keep ! Adding 302 model components to the UV plane model. ! The established model now contains 612 components and 0.212935 Jy ![Exited script file: muppet] wmap "J1729-2657_S_2015_03_17_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.833 x 7.458 at -5.891 degrees (North through East) ! Clean map min=-0.0011169 max=0.062488 Jy/beam ! Writing clean map to FITS file: J1729-2657_S_2015_03_17_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0624879 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000175285 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.841529 0.841529 1.68306 3.36612 6.73223 13.4645 26.9289 53.8579 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.062 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.833 x 7.458 at -5.891 degrees (North through East) ! Clean map min=-0.0011169 max=0.062488 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1729-2657_S_2015_03_17_pus_uvs.log closed on Fri Dec 30 23:05:56 2016