! Started logfile: J1458+0416_S_2015_03_17_pus_uvs.log on Fri Dec 30 23:01:52 2016 obs J1458+0416_S_2015_03_17_pus_uva.fits ! Reading UV FITS file: J1458+0416_S_2015_03_17_pus_uva.fits ! AN table 1: 15 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.56 visibilities/baseline/integration-bin. ! Found source: J1458+0416 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 330 lines of history. ! ! Reading 1512 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1458+0416_S_2015_03_17_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.816443Jy sigma=0.009308 ! Fit after self-cal, rms=0.813149Jy sigma=0.009271 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.345 mas, bmaj=13.59 mas, bpa=-25.06 degrees ! Estimated noise=1928.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.144867 Jy ! Component: 100 - total flux cleaned = 0.180659 Jy ! Total flux subtracted in 100 components = 0.180659 Jy ! Clean residual min=-0.011514 max=0.014370 Jy/beam ! Clean residual mean=0.000062 rms=0.003280 Jy/beam ! Combined flux in latest and established models = 0.180659 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.180659 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079981Jy sigma=0.000842 ! Fit after self-cal, rms=0.079969Jy sigma=0.000842 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.861 mas, bmaj=13.92 mas, bpa=-24.85 degrees ! Estimated noise=1621.58 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0148152 Jy ! Component: 100 - total flux cleaned = 0.0222871 Jy ! Component: 150 - total flux cleaned = 0.02693 Jy ! Component: 200 - total flux cleaned = 0.0284839 Jy ! Total flux subtracted in 200 components = 0.0284839 Jy ! Clean residual min=-0.009799 max=0.007891 Jy/beam ! Clean residual mean=0.000059 rms=0.002380 Jy/beam ! Combined flux in latest and established models = 0.209143 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 44 components and 0.209143 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076528Jy sigma=0.000816 ! Fit after self-cal, rms=0.076516Jy sigma=0.000816 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.86 HN 1.00* KP 1.13 ! LA 0.96 MK 0.97 NL 0.87 OV 1.06 ! PT 1.07 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.91 HN 1.00* KP 1.14 ! LA 0.98 MK 1.02 NL 0.98 OV 1.01 ! PT 1.07 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.94 HN 1.00* KP 1.01 ! LA 0.75 MK 1.07 NL 1.09 OV 0.96 ! PT 1.02 SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 0.94 HN 1.00* KP 0.99 ! LA 0.84 MK 1.05 NL 1.01 OV 1.07 ! PT 1.06 SC 1.00* ! ! ! Fit before self-cal, rms=0.076516Jy sigma=0.000816 ! Fit after self-cal, rms=0.069447Jy sigma=0.000776 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.905 mas, bmaj=13.95 mas, bpa=-24.63 degrees ! Estimated noise=1610.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00191635 Jy ! Component: 100 - total flux cleaned = -0.0019675 Jy ! Component: 150 - total flux cleaned = -0.00186294 Jy ! Component: 200 - total flux cleaned = -0.00176783 Jy ! Total flux subtracted in 200 components = -0.00176783 Jy ! Clean residual min=-0.004836 max=0.003931 Jy/beam ! Clean residual mean=-0.000004 rms=0.001109 Jy/beam ! Combined flux in latest and established models = 0.207375 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 69 components and 0.207375 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069379Jy sigma=0.000775 ! Fit after self-cal, rms=0.069324Jy sigma=0.000775 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069324Jy sigma=0.000775 ! Fit after self-cal, rms=0.069317Jy sigma=0.000774 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.914 mas, bmaj=13.97 mas, bpa=-24.62 degrees ! Estimated noise=1611.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000975842 Jy ! Component: 100 - total flux cleaned = -0.000976763 Jy ! Component: 150 - total flux cleaned = -0.000975677 Jy ! Component: 200 - total flux cleaned = -0.000911511 Jy ! Total flux subtracted in 200 components = -0.000911511 Jy ! Clean residual min=-0.004757 max=0.003763 Jy/beam ! Clean residual mean=-0.000004 rms=0.001085 Jy/beam ! Combined flux in latest and established models = 0.206464 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 78 components and 0.206464 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069297Jy sigma=0.000774 ! Fit after self-cal, rms=0.069296Jy sigma=0.000774 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000119328 Jy ! Component: 100 - total flux cleaned = 0.000137586 Jy ! Component: 150 - total flux cleaned = 0.000190543 Jy ! Component: 200 - total flux cleaned = 0.000240653 Jy ! Total flux subtracted in 200 components = 0.000240653 Jy ! Clean residual min=-0.004745 max=0.003695 Jy/beam ! Clean residual mean=-0.000004 rms=0.001079 Jy/beam ! Combined flux in latest and established models = 0.206704 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 85 components and 0.206704 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069287Jy sigma=0.000774 ! Fit after self-cal, rms=0.069287Jy sigma=0.000774 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069287Jy sigma=0.000774 ! Fit after self-cal, rms=0.069241Jy sigma=0.000774 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.922 mas, bmaj=13.97 mas, bpa=-24.62 degrees ! Estimated noise=1609.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000564639 Jy ! Component: 100 - total flux cleaned = -0.000618862 Jy ! Component: 150 - total flux cleaned = -0.000586928 Jy ! Component: 200 - total flux cleaned = -0.000555235 Jy ! Total flux subtracted in 200 components = -0.000555235 Jy ! Clean residual min=-0.004709 max=0.003680 Jy/beam ! Clean residual mean=-0.000005 rms=0.001068 Jy/beam ! Combined flux in latest and established models = 0.206149 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 94 components and 0.206149 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069233Jy sigma=0.000774 ! Fit after self-cal, rms=0.069233Jy sigma=0.000774 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.32434e-05 Jy ! Component: 100 - total flux cleaned = 0.000107236 Jy ! Component: 150 - total flux cleaned = 0.000149883 Jy ! Component: 200 - total flux cleaned = 0.000204937 Jy ! Total flux subtracted in 200 components = 0.000204937 Jy ! Clean residual min=-0.004684 max=0.003644 Jy/beam ! Clean residual mean=-0.000005 rms=0.001064 Jy/beam ! Combined flux in latest and established models = 0.206354 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 97 components and 0.206354 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069227Jy sigma=0.000774 ! Fit after self-cal, rms=0.069227Jy sigma=0.000774 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069227Jy sigma=0.000774 ! Fit after self-cal, rms=0.069189Jy sigma=0.000774 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.277 mas, bmaj=13.78 mas, bpa=-25.16 degrees ! Estimated noise=1776.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000149826 Jy ! Component: 100 - total flux cleaned = 0.000171463 Jy ! Component: 150 - total flux cleaned = 0.000206669 Jy ! Component: 200 - total flux cleaned = 0.000222329 Jy ! Total flux subtracted in 200 components = 0.000222329 Jy ! Clean residual min=-0.004745 max=0.003738 Jy/beam ! Clean residual mean=-0.000009 rms=0.001195 Jy/beam ! Combined flux in latest and established models = 0.206576 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 110 components and 0.206576 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069188Jy sigma=0.000774 ! Fit after self-cal, rms=0.069187Jy sigma=0.000774 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.51625e-05 Jy ! Component: 100 - total flux cleaned = -2.33003e-06 Jy ! Component: 150 - total flux cleaned = -2.362e-06 Jy ! Component: 200 - total flux cleaned = 8.73253e-06 Jy ! Total flux subtracted in 200 components = 8.73253e-06 Jy ! Clean residual min=-0.004709 max=0.003695 Jy/beam ! Clean residual mean=-0.000008 rms=0.001190 Jy/beam ! Combined flux in latest and established models = 0.206585 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 122 components and 0.206585 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069188Jy sigma=0.000774 ! Fit after self-cal, rms=0.069188Jy sigma=0.000774 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.931 mas, bmaj=13.96 mas, bpa=-24.62 degrees ! Estimated noise=1608.59 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.931 x 13.96 at -24.62 degrees (North through East) ! Clean map min=-0.0046843 max=0.1839 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.399 mas, bmaj=13.54 mas, bpa=-24.8 degrees ! Estimated noise=1899.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.142698 Jy ! Component: 100 - total flux cleaned = 0.176688 Jy ! Component: 150 - total flux cleaned = 0.190041 Jy ! Component: 200 - total flux cleaned = 0.196702 Jy ! Total flux subtracted in 200 components = 0.196702 Jy ! Clean residual min=-0.004933 max=0.004843 Jy/beam ! Clean residual mean=0.000009 rms=0.001324 Jy/beam ! Combined flux in latest and established models = 0.196702 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.196702 Jy ! Inverting map and beam ! Estimated beam: bmin=4.931 mas, bmaj=13.96 mas, bpa=-24.62 degrees ! Estimated noise=1608.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00376266 Jy ! Component: 100 - total flux cleaned = 0.00527791 Jy ! Component: 150 - total flux cleaned = 0.00642695 Jy ! Component: 200 - total flux cleaned = 0.0072624 Jy ! Total flux subtracted in 200 components = 0.0072624 Jy ! Clean residual min=-0.004955 max=0.003834 Jy/beam ! Clean residual mean=-0.000002 rms=0.001099 Jy/beam ! Combined flux in latest and established models = 0.203964 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 52 components and 0.203964 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.277 mas, bmaj=13.78 mas, bpa=-25.16 degrees ! Estimated noise=1776.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106096 Jy ! Component: 100 - total flux cleaned = 0.00141081 Jy ! Component: 150 - total flux cleaned = 0.00166472 Jy ! Component: 200 - total flux cleaned = 0.00178497 Jy ! Total flux subtracted in 200 components = 0.00178497 Jy ! Clean residual min=-0.004949 max=0.003735 Jy/beam ! Clean residual mean=-0.000007 rms=0.001212 Jy/beam ! Combined flux in latest and established models = 0.205749 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000108617 Jy ! Component: 100 - total flux cleaned = 0.000206667 Jy ! Component: 150 - total flux cleaned = 0.00029886 Jy ! Component: 200 - total flux cleaned = 0.000368995 Jy ! Total flux subtracted in 200 components = 0.000368995 Jy ! Clean residual min=-0.004851 max=0.003723 Jy/beam ! Clean residual mean=-0.000008 rms=0.001205 Jy/beam ! Combined flux in latest and established models = 0.206118 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 82 components and 0.206118 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.931 mas, bmaj=13.96 mas, bpa=-24.62 degrees ! Estimated noise=1608.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.49997e-06 Jy ! Component: 100 - total flux cleaned = 0.000111966 Jy ! Component: 150 - total flux cleaned = 0.000192292 Jy ! Component: 200 - total flux cleaned = 0.000247135 Jy ! Total flux subtracted in 200 components = 0.000247135 Jy ! Clean residual min=-0.004784 max=0.003742 Jy/beam ! Clean residual mean=-0.000005 rms=0.001059 Jy/beam ! Combined flux in latest and established models = 0.206365 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 95 components and 0.206365 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069195Jy sigma=0.000774 ! Fit after self-cal, rms=0.069194Jy sigma=0.000774 wmodel J1458+0416_S_2015_03_17_pus_map.mod ! Writing 95 model components to file: J1458+0416_S_2015_03_17_pus_map.mod wobs J1458+0416_S_2015_03_17_pus_uvs.fits ! Writing UV FITS file: J1458+0416_S_2015_03_17_pus_uvs.fits wwins J1458+0416_S_2015_03_17_pus_map.win ! wwins: Wrote 1 windows to J1458+0416_S_2015_03_17_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0015407 Jy ! Component: 100 - total flux cleaned = -0.00166364 Jy ! Component: 150 - total flux cleaned = -0.00155195 Jy ! Component: 200 - total flux cleaned = -0.00133827 Jy ! Component: 250 - total flux cleaned = -0.00144008 Jy ! Component: 300 - total flux cleaned = -0.00153494 Jy ! Component: 350 - total flux cleaned = -0.00162723 Jy ! Component: 400 - total flux cleaned = -0.00171608 Jy ! Component: 450 - total flux cleaned = -0.00184406 Jy ! Component: 500 - total flux cleaned = -0.0020068 Jy ! Component: 550 - total flux cleaned = -0.00208414 Jy ! Component: 600 - total flux cleaned = -0.00208394 Jy ! Component: 650 - total flux cleaned = -0.00212041 Jy ! Component: 700 - total flux cleaned = -0.00211965 Jy ! Component: 750 - total flux cleaned = -0.00211918 Jy ! Component: 800 - total flux cleaned = -0.00205319 Jy ! Component: 850 - total flux cleaned = -0.00211919 Jy ! Component: 900 - total flux cleaned = -0.00211934 Jy ! Component: 950 - total flux cleaned = -0.0021185 Jy ! Component: 1000 - total flux cleaned = -0.00214772 Jy ! Component: 1050 - total flux cleaned = -0.00217742 Jy ! Component: 1100 - total flux cleaned = -0.00234942 Jy ! Component: 1150 - total flux cleaned = -0.00251834 Jy ! Component: 1200 - total flux cleaned = -0.00271187 Jy ! Component: 1250 - total flux cleaned = -0.00290197 Jy ! Component: 1300 - total flux cleaned = -0.00303583 Jy ! Component: 1350 - total flux cleaned = -0.00319356 Jy ! Component: 1400 - total flux cleaned = -0.00334829 Jy ! Component: 1450 - total flux cleaned = -0.00345015 Jy ! Component: 1500 - total flux cleaned = -0.00360094 Jy ! Component: 1550 - total flux cleaned = -0.00365078 Jy ! Component: 1600 - total flux cleaned = -0.00367515 Jy ! Component: 1650 - total flux cleaned = -0.00377195 Jy ! Component: 1700 - total flux cleaned = -0.00379558 Jy ! Component: 1750 - total flux cleaned = -0.00372456 Jy ! Component: 1800 - total flux cleaned = -0.00377156 Jy ! Component: 1850 - total flux cleaned = -0.00379489 Jy ! Component: 1900 - total flux cleaned = -0.00381774 Jy ! Component: 1950 - total flux cleaned = -0.00384036 Jy ! Component: 2000 - total flux cleaned = -0.0038628 Jy ! Component: 2050 - total flux cleaned = -0.00386296 Jy ! Component: 2100 - total flux cleaned = -0.00392917 Jy ! Component: 2150 - total flux cleaned = -0.00397297 Jy ! Component: 2200 - total flux cleaned = -0.00401641 Jy ! Component: 2250 - total flux cleaned = -0.00401635 Jy ! Component: 2300 - total flux cleaned = -0.00408022 Jy ! Component: 2350 - total flux cleaned = -0.00410131 Jy ! Component: 2400 - total flux cleaned = -0.00408016 Jy ! Component: 2450 - total flux cleaned = -0.00412191 Jy ! Component: 2500 - total flux cleaned = -0.00412185 Jy ! Component: 2550 - total flux cleaned = -0.00414253 Jy ! Component: 2600 - total flux cleaned = -0.0041426 Jy ! Component: 2650 - total flux cleaned = -0.00416289 Jy ! Component: 2700 - total flux cleaned = -0.00420313 Jy ! Component: 2750 - total flux cleaned = -0.00418307 Jy ! Component: 2800 - total flux cleaned = -0.0041631 Jy ! Component: 2850 - total flux cleaned = -0.00416315 Jy ! Component: 2900 - total flux cleaned = -0.00416318 Jy ! Component: 2950 - total flux cleaned = -0.00420259 Jy ! Component: 3000 - total flux cleaned = -0.00416327 Jy ! Component: 3050 - total flux cleaned = -0.00414371 Jy ! Component: 3100 - total flux cleaned = -0.00414381 Jy ! Component: 3150 - total flux cleaned = -0.00408507 Jy ! Component: 3200 - total flux cleaned = -0.0041045 Jy ! Component: 3250 - total flux cleaned = -0.00408487 Jy ! Component: 3300 - total flux cleaned = -0.00406528 Jy ! Component: 3350 - total flux cleaned = -0.00404575 Jy ! Component: 3400 - total flux cleaned = -0.00404582 Jy ! Component: 3450 - total flux cleaned = -0.00402615 Jy ! Component: 3500 - total flux cleaned = -0.00404594 Jy ! Component: 3550 - total flux cleaned = -0.0040459 Jy ! Component: 3600 - total flux cleaned = -0.00404576 Jy ! Component: 3650 - total flux cleaned = -0.00404561 Jy ! Component: 3700 - total flux cleaned = -0.00404565 Jy ! Component: 3750 - total flux cleaned = -0.00402586 Jy ! Component: 3800 - total flux cleaned = -0.0039861 Jy ! Component: 3850 - total flux cleaned = -0.00392632 Jy ! Component: 3900 - total flux cleaned = -0.00386638 Jy ! Component: 3950 - total flux cleaned = -0.00382621 Jy ! Component: 4000 - total flux cleaned = -0.00382614 Jy ! Component: 4050 - total flux cleaned = -0.00374549 Jy ! Total flux subtracted in 4096 components = -0.00372531 Jy ! Clean residual min=-0.001183 max=0.001131 Jy/beam ! Clean residual mean=-0.000000 rms=0.000356 Jy/beam ! Combined flux in latest and established models = 0.20264 Jy keep ! Adding 285 model components to the UV plane model. ! The established model now contains 380 components and 0.20264 Jy ![Exited script file: muppet] wmap "J1458+0416_S_2015_03_17_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.931 x 13.96 at -24.62 degrees (North through East) ! Clean map min=-0.0030681 max=0.18387 Jy/beam ! Writing clean map to FITS file: J1458+0416_S_2015_03_17_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.183869 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000355934 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.58074 0.58074 1.16148 2.32296 4.64592 9.29184 18.5837 37.1674 74.3347 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.183 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.931 x 13.96 at -24.62 degrees (North through East) ! Clean map min=-0.0030681 max=0.18387 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1458+0416_S_2015_03_17_pus_uvs.log closed on Fri Dec 30 23:01:56 2016