! Started logfile: J1408-0752_S_2015_03_17_pus_uvs.log on Fri Dec 30 23:01:22 2016 obs J1408-0752_S_2015_03_17_pus_uva.fits ! Reading UV FITS file: J1408-0752_S_2015_03_17_pus_uva.fits ! AN table 1: 27 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.437037 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1408-0752 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 330 lines of history. ! ! Reading 2124 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1408-0752_S_2015_03_17_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 88 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 88 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 88 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 88 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=3.046468Jy sigma=0.003050 ! Fit after self-cal, rms=3.067690Jy sigma=0.002836 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.684 mas, bmaj=14.98 mas, bpa=24.14 degrees ! Estimated noise=2199.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.58416 Jy ! Component: 100 - total flux cleaned = 0.730063 Jy ! Total flux subtracted in 100 components = 0.730063 Jy ! Clean residual min=-0.050155 max=0.084619 Jy/beam ! Clean residual mean=0.000058 rms=0.015846 Jy/beam ! Combined flux in latest and established models = 0.730063 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.730063 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.065946Jy sigma=0.001814 ! Fit after self-cal, rms=3.066490Jy sigma=0.001812 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.748 mas, bmaj=15.6 mas, bpa=23.21 degrees ! Estimated noise=1782.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-8.5, -2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.106667 Jy ! Component: 100 - total flux cleaned = 0.162669 Jy ! Component: 150 - total flux cleaned = 0.189276 Jy ! Component: 200 - total flux cleaned = 0.205044 Jy ! Total flux subtracted in 200 components = 0.205044 Jy ! Clean residual min=-0.031828 max=0.030234 Jy/beam ! Clean residual mean=-0.000057 rms=0.008499 Jy/beam ! Combined flux in latest and established models = 0.935107 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 51 components and 0.935107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.061543Jy sigma=0.001271 ! Fit after self-cal, rms=3.055672Jy sigma=0.001262 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.87 HN 1.00* KP 1.15 ! LA 0.99 MK 1.00* NL 0.92 OV 1.03 ! PT 1.09 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.86 HN 1.00* KP 1.08 ! LA 0.97 MK 1.00* NL 1.04 OV 1.07 ! PT 1.05 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.91 HN 1.00* KP 0.97 ! LA 0.78 MK 1.00* NL 1.20 OV 0.99 ! PT 1.02 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.91 HN 1.00* KP 0.94 ! LA 0.86 MK 1.00* NL 1.01 OV 1.05 ! PT 1.07 SC 0.99 ! ! ! Fit before self-cal, rms=3.055672Jy sigma=0.001262 ! Fit after self-cal, rms=2.700358Jy sigma=0.000915 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.789 mas, bmaj=15.88 mas, bpa=23.35 degrees ! Estimated noise=1758.11 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00722392 Jy ! Component: 100 - total flux cleaned = 0.0110365 Jy ! Component: 150 - total flux cleaned = 0.0124065 Jy ! Component: 200 - total flux cleaned = 0.013592 Jy ! Total flux subtracted in 200 components = 0.013592 Jy ! Clean residual min=-0.011176 max=0.013402 Jy/beam ! Clean residual mean=-0.000007 rms=0.003284 Jy/beam ! Combined flux in latest and established models = 0.948699 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 80 components and 0.948699 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.699878Jy sigma=0.000892 ! Fit after self-cal, rms=2.699331Jy sigma=0.000888 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.699331Jy sigma=0.000888 ! Fit after self-cal, rms=1.012823Jy sigma=0.000859 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.797 mas, bmaj=15.79 mas, bpa=23.28 degrees ! Estimated noise=1753.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00533466 Jy ! Component: 100 - total flux cleaned = 0.00744851 Jy ! Component: 150 - total flux cleaned = 0.00836924 Jy ! Component: 200 - total flux cleaned = 0.00868114 Jy ! Total flux subtracted in 200 components = 0.00868114 Jy ! Clean residual min=-0.008016 max=0.007343 Jy/beam ! Clean residual mean=0.000003 rms=0.001978 Jy/beam ! Combined flux in latest and established models = 0.95738 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 105 components and 0.95738 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.012641Jy sigma=0.000850 ! Fit after self-cal, rms=1.012021Jy sigma=0.000849 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00117377 Jy ! Component: 100 - total flux cleaned = 0.00130213 Jy ! Component: 150 - total flux cleaned = 0.00178843 Jy ! Component: 200 - total flux cleaned = 0.0019945 Jy ! Total flux subtracted in 200 components = 0.0019945 Jy ! Clean residual min=-0.007319 max=0.006841 Jy/beam ! Clean residual mean=0.000003 rms=0.001800 Jy/beam ! Combined flux in latest and established models = 0.959374 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 119 components and 0.959374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.011925Jy sigma=0.000845 ! Fit after self-cal, rms=1.011877Jy sigma=0.000844 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.011877Jy sigma=0.000844 ! Fit after self-cal, rms=1.005270Jy sigma=0.000844 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.806 mas, bmaj=15.77 mas, bpa=23.27 degrees ! Estimated noise=1752.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00109244 Jy ! Component: 100 - total flux cleaned = 0.00199388 Jy ! Component: 150 - total flux cleaned = 0.00235796 Jy ! Component: 200 - total flux cleaned = 0.00259311 Jy ! Total flux subtracted in 200 components = 0.00259311 Jy ! Clean residual min=-0.006649 max=0.005540 Jy/beam ! Clean residual mean=0.000004 rms=0.001620 Jy/beam ! Combined flux in latest and established models = 0.961967 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 130 components and 0.961967 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.005192Jy sigma=0.000841 ! Fit after self-cal, rms=1.005181Jy sigma=0.000841 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000314363 Jy ! Component: 100 - total flux cleaned = 0.000400717 Jy ! Component: 150 - total flux cleaned = 0.000401368 Jy ! Component: 200 - total flux cleaned = 0.000523811 Jy ! Total flux subtracted in 200 components = 0.000523811 Jy ! Clean residual min=-0.006329 max=0.005415 Jy/beam ! Clean residual mean=0.000004 rms=0.001551 Jy/beam ! Combined flux in latest and established models = 0.962491 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 139 components and 0.962491 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.005125Jy sigma=0.000840 ! Fit after self-cal, rms=1.005115Jy sigma=0.000839 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.005115Jy sigma=0.000839 ! Fit after self-cal, rms=1.008001Jy sigma=0.000839 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.633 mas, bmaj=16.51 mas, bpa=22.12 degrees ! Estimated noise=1914.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000126442 Jy ! Component: 100 - total flux cleaned = 0.000536943 Jy ! Component: 150 - total flux cleaned = 0.000844244 Jy ! Component: 200 - total flux cleaned = 0.000848068 Jy ! Total flux subtracted in 200 components = 0.000848068 Jy ! Clean residual min=-0.005945 max=0.005911 Jy/beam ! Clean residual mean=0.000005 rms=0.001668 Jy/beam ! Combined flux in latest and established models = 0.963339 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 156 components and 0.963339 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.007943Jy sigma=0.000839 ! Fit after self-cal, rms=1.007943Jy sigma=0.000838 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000131676 Jy ! Component: 100 - total flux cleaned = 9.94267e-05 Jy ! Component: 150 - total flux cleaned = 0.00014228 Jy ! Component: 200 - total flux cleaned = 0.00010417 Jy ! Total flux subtracted in 200 components = 0.00010417 Jy ! Clean residual min=-0.005815 max=0.005805 Jy/beam ! Clean residual mean=0.000005 rms=0.001641 Jy/beam ! Combined flux in latest and established models = 0.963443 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 164 components and 0.963443 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.007910Jy sigma=0.000838 ! Fit after self-cal, rms=1.007915Jy sigma=0.000838 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.809 mas, bmaj=15.78 mas, bpa=23.27 degrees ! Estimated noise=1752.14 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.809 x 15.78 at 23.27 degrees (North through East) ! Clean map min=-0.0080786 max=0.73072 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.007915Jy sigma=0.000838 ! Fit after self-cal, rms=5.243349Jy sigma=0.000762 ! Inverting map and beam ! Estimated beam: bmin=4.811 mas, bmaj=15.78 mas, bpa=23.26 degrees ! Estimated noise=1752.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00069723 Jy ! Component: 100 - total flux cleaned = 0.000589224 Jy ! Component: 150 - total flux cleaned = 0.000500032 Jy ! Component: 200 - total flux cleaned = 0.000499436 Jy ! Total flux subtracted in 200 components = 0.000499436 Jy ! Clean residual min=-0.005635 max=0.004723 Jy/beam ! Clean residual mean=0.000002 rms=0.001397 Jy/beam ! Combined flux in latest and established models = 0.963943 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 180 components and 0.963943 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.243337Jy sigma=0.000761 ! Fit after self-cal, rms=5.243564Jy sigma=0.000761 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000173291 Jy ! Component: 100 - total flux cleaned = 0.000129452 Jy ! Component: 150 - total flux cleaned = 0.000129617 Jy ! Component: 200 - total flux cleaned = 0.000128685 Jy ! Total flux subtracted in 200 components = 0.000128685 Jy ! Clean residual min=-0.005552 max=0.004706 Jy/beam ! Clean residual mean=0.000002 rms=0.001380 Jy/beam ! Combined flux in latest and established models = 0.964071 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 191 components and 0.964071 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.243553Jy sigma=0.000761 ! Fit after self-cal, rms=5.243616Jy sigma=0.000761 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.243616Jy sigma=0.000761 ! Fit after self-cal, rms=5.204402Jy sigma=0.000761 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.724 mas, bmaj=15.11 mas, bpa=24.06 degrees ! Estimated noise=2153.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.571297 Jy ! Component: 100 - total flux cleaned = 0.717851 Jy ! Component: 150 - total flux cleaned = 0.79448 Jy ! Component: 200 - total flux cleaned = 0.840121 Jy ! Total flux subtracted in 200 components = 0.840121 Jy ! Clean residual min=-0.016237 max=0.024059 Jy/beam ! Clean residual mean=0.000048 rms=0.005353 Jy/beam ! Combined flux in latest and established models = 0.840121 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 36 model components to the UV plane model. ! The established model now contains 36 components and 0.840121 Jy ! Inverting map and beam ! Estimated beam: bmin=4.81 mas, bmaj=15.79 mas, bpa=23.27 degrees ! Estimated noise=1752.79 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0389174 Jy ! Component: 100 - total flux cleaned = 0.0620643 Jy ! Component: 150 - total flux cleaned = 0.0776514 Jy ! Component: 200 - total flux cleaned = 0.088862 Jy ! Total flux subtracted in 200 components = 0.088862 Jy ! Clean residual min=-0.008031 max=0.007641 Jy/beam ! Clean residual mean=0.000022 rms=0.002289 Jy/beam ! Combined flux in latest and established models = 0.928983 Jy ! Adding 76 model components to the UV plane model. ! The established model now contains 104 components and 0.928983 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.64 mas, bmaj=16.51 mas, bpa=22.15 degrees ! Estimated noise=1914.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102453 Jy ! Component: 100 - total flux cleaned = 0.0173923 Jy ! Component: 150 - total flux cleaned = 0.02045 Jy ! Component: 200 - total flux cleaned = 0.0229742 Jy ! Total flux subtracted in 200 components = 0.0229742 Jy ! Clean residual min=-0.006567 max=0.005823 Jy/beam ! Clean residual mean=0.000009 rms=0.001835 Jy/beam ! Combined flux in latest and established models = 0.951957 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0016755 Jy ! Component: 100 - total flux cleaned = 0.00311814 Jy ! Component: 150 - total flux cleaned = 0.00457735 Jy ! Component: 200 - total flux cleaned = 0.00564052 Jy ! Total flux subtracted in 200 components = 0.00564052 Jy ! Clean residual min=-0.006113 max=0.005169 Jy/beam ! Clean residual mean=0.000005 rms=0.001608 Jy/beam ! Combined flux in latest and established models = 0.957598 Jy ! Adding 99 model components to the UV plane model. ! The established model now contains 199 components and 0.957598 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.81 mas, bmaj=15.79 mas, bpa=23.27 degrees ! Estimated noise=1752.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00177388 Jy ! Component: 100 - total flux cleaned = 0.00252457 Jy ! Component: 150 - total flux cleaned = 0.00284459 Jy ! Component: 200 - total flux cleaned = 0.00313072 Jy ! Total flux subtracted in 200 components = 0.00313072 Jy ! Clean residual min=-0.006174 max=0.004836 Jy/beam ! Clean residual mean=0.000002 rms=0.001415 Jy/beam ! Combined flux in latest and established models = 0.960728 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 224 components and 0.960728 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.204494Jy sigma=0.000763 ! Fit after self-cal, rms=5.204313Jy sigma=0.000762 wmodel J1408-0752_S_2015_03_17_pus_map.mod ! Writing 224 model components to file: J1408-0752_S_2015_03_17_pus_map.mod wobs J1408-0752_S_2015_03_17_pus_uvs.fits ! Writing UV FITS file: J1408-0752_S_2015_03_17_pus_uvs.fits wwins J1408-0752_S_2015_03_17_pus_map.win ! wwins: Wrote 2 windows to J1408-0752_S_2015_03_17_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00175003 Jy ! Component: 100 - total flux cleaned = -0.00133772 Jy ! Component: 150 - total flux cleaned = -0.000805435 Jy ! Component: 200 - total flux cleaned = -9.07373e-05 Jy ! Component: 250 - total flux cleaned = 0.000451928 Jy ! Component: 300 - total flux cleaned = 0.000712767 Jy ! Component: 350 - total flux cleaned = 0.000961919 Jy ! Component: 400 - total flux cleaned = 0.00126114 Jy ! Component: 450 - total flux cleaned = 0.00131934 Jy ! Component: 500 - total flux cleaned = 0.00154554 Jy ! Component: 550 - total flux cleaned = 0.00165561 Jy ! Component: 600 - total flux cleaned = 0.00181551 Jy ! Component: 650 - total flux cleaned = 0.00186863 Jy ! Component: 700 - total flux cleaned = 0.00186895 Jy ! Component: 750 - total flux cleaned = 0.00181931 Jy ! Component: 800 - total flux cleaned = 0.00186788 Jy ! Component: 850 - total flux cleaned = 0.00172742 Jy ! Component: 900 - total flux cleaned = 0.0017732 Jy ! Component: 950 - total flux cleaned = 0.00172787 Jy ! Component: 1000 - total flux cleaned = 0.00164057 Jy ! Component: 1050 - total flux cleaned = 0.00151234 Jy ! Component: 1100 - total flux cleaned = 0.00142814 Jy ! Component: 1150 - total flux cleaned = 0.00134413 Jy ! Component: 1200 - total flux cleaned = 0.00117938 Jy ! Component: 1250 - total flux cleaned = 0.001018 Jy ! Component: 1300 - total flux cleaned = 0.000978546 Jy ! Component: 1350 - total flux cleaned = 0.00090008 Jy ! Component: 1400 - total flux cleaned = 0.000745562 Jy ! Component: 1450 - total flux cleaned = 0.000707547 Jy ! Component: 1500 - total flux cleaned = 0.000631915 Jy ! Component: 1550 - total flux cleaned = 0.000447139 Jy ! Component: 1600 - total flux cleaned = 0.000338135 Jy ! Component: 1650 - total flux cleaned = 0.000230124 Jy ! Component: 1700 - total flux cleaned = 8.77077e-05 Jy ! Component: 1750 - total flux cleaned = -8.84452e-05 Jy ! Component: 1800 - total flux cleaned = -0.000227357 Jy ! Component: 1850 - total flux cleaned = -0.000467533 Jy ! Component: 1900 - total flux cleaned = -0.000670451 Jy ! Component: 1950 - total flux cleaned = -0.000770974 Jy ! Component: 2000 - total flux cleaned = -0.00106965 Jy ! Component: 2050 - total flux cleaned = -0.00129948 Jy ! Component: 2100 - total flux cleaned = -0.0015598 Jy ! Component: 2150 - total flux cleaned = -0.00181724 Jy ! Component: 2200 - total flux cleaned = -0.0020406 Jy ! Component: 2250 - total flux cleaned = -0.00226153 Jy ! Component: 2300 - total flux cleaned = -0.00248048 Jy ! Component: 2350 - total flux cleaned = -0.00263502 Jy ! Component: 2400 - total flux cleaned = -0.00291158 Jy ! Component: 2450 - total flux cleaned = -0.0030029 Jy ! Component: 2500 - total flux cleaned = -0.00306327 Jy ! Component: 2550 - total flux cleaned = -0.00309338 Jy ! Component: 2600 - total flux cleaned = -0.00318249 Jy ! Component: 2650 - total flux cleaned = -0.00321205 Jy ! Component: 2700 - total flux cleaned = -0.00318275 Jy ! Component: 2750 - total flux cleaned = -0.00324112 Jy ! Component: 2800 - total flux cleaned = -0.00324125 Jy ! Component: 2850 - total flux cleaned = -0.00327021 Jy ! Component: 2900 - total flux cleaned = -0.0033848 Jy ! Component: 2950 - total flux cleaned = -0.00329942 Jy ! Component: 3000 - total flux cleaned = -0.00338471 Jy ! Component: 3050 - total flux cleaned = -0.00338487 Jy ! Component: 3100 - total flux cleaned = -0.00341293 Jy ! Component: 3150 - total flux cleaned = -0.00338498 Jy ! Component: 3200 - total flux cleaned = -0.00346866 Jy ! Component: 3250 - total flux cleaned = -0.00346862 Jy ! Component: 3300 - total flux cleaned = -0.00346874 Jy ! Component: 3350 - total flux cleaned = -0.00357856 Jy ! Component: 3400 - total flux cleaned = -0.00352389 Jy ! Component: 3450 - total flux cleaned = -0.00355101 Jy ! Component: 3500 - total flux cleaned = -0.00360516 Jy ! Component: 3550 - total flux cleaned = -0.00360514 Jy ! Component: 3600 - total flux cleaned = -0.00368592 Jy ! Component: 3650 - total flux cleaned = -0.00365896 Jy ! Component: 3700 - total flux cleaned = -0.00365891 Jy ! Component: 3750 - total flux cleaned = -0.00365902 Jy ! Component: 3800 - total flux cleaned = -0.00365924 Jy ! Component: 3850 - total flux cleaned = -0.00371241 Jy ! Component: 3900 - total flux cleaned = -0.00373892 Jy ! Component: 3950 - total flux cleaned = -0.00387052 Jy ! Component: 4000 - total flux cleaned = -0.00379166 Jy ! Component: 4050 - total flux cleaned = -0.0039225 Jy ! Total flux subtracted in 4096 components = -0.00392249 Jy ! Clean residual min=-0.001464 max=0.001450 Jy/beam ! Clean residual mean=0.000004 rms=0.000486 Jy/beam ! Combined flux in latest and established models = 0.956806 Jy keep ! Adding 265 model components to the UV plane model. ! The established model now contains 489 components and 0.956806 Jy ![Exited script file: muppet] wmap "J1408-0752_S_2015_03_17_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.81 x 15.79 at 23.27 degrees (North through East) ! Clean map min=-0.0042538 max=0.7335 Jy/beam ! Writing clean map to FITS file: J1408-0752_S_2015_03_17_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.733501 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000478096 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.19554 0.19554 0.39108 0.78216 1.56432 3.12864 6.25728 12.5146 25.0291 50.0583 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.733 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.81 x 15.79 at 23.27 degrees (North through East) ! Clean map min=-0.0042538 max=0.7335 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1408-0752_S_2015_03_17_pus_uvs.log closed on Fri Dec 30 23:01:27 2016