! Started logfile: J1334-1150_S_2015_03_17_pus_uvs.log on Fri Dec 30 23:00:20 2016 obs J1334-1150_S_2015_03_17_pus_uva.fits ! Reading UV FITS file: J1334-1150_S_2015_03_17_pus_uva.fits ! AN table 1: 83 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.779652 visibilities/baseline/integration-bin. ! Found source: J1334-1150 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 330 lines of history. ! ! Reading 11648 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1334-1150_S_2015_03_17_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.841484Jy sigma=0.008551 ! Fit after self-cal, rms=0.819806Jy sigma=0.008349 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.807 mas, bmaj=7.661 mas, bpa=-11.14 degrees ! Estimated noise=1034.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.125511 Jy ! Component: 100 - total flux cleaned = 0.170038 Jy ! Total flux subtracted in 100 components = 0.170038 Jy ! Clean residual min=-0.010703 max=0.021934 Jy/beam ! Clean residual mean=-0.000058 rms=0.003117 Jy/beam ! Combined flux in latest and established models = 0.170038 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.170038 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108127Jy sigma=0.000949 ! Fit after self-cal, rms=0.108001Jy sigma=0.000948 ! Inverting map ! Added new window around map position (-3, -2.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0257226 Jy ! Component: 100 - total flux cleaned = 0.0417462 Jy ! Total flux subtracted in 100 components = 0.0417462 Jy ! Clean residual min=-0.009218 max=0.016677 Jy/beam ! Clean residual mean=-0.000045 rms=0.002060 Jy/beam ! Combined flux in latest and established models = 0.211784 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 41 components and 0.211784 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096903Jy sigma=0.000856 ! Fit after self-cal, rms=0.096857Jy sigma=0.000855 ! Inverting map ! Added new window around map position (-7.5, -9.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0151157 Jy ! Component: 100 - total flux cleaned = 0.0235351 Jy ! Total flux subtracted in 100 components = 0.0235351 Jy ! Clean residual min=-0.007521 max=0.007651 Jy/beam ! Clean residual mean=-0.000040 rms=0.001573 Jy/beam ! Combined flux in latest and established models = 0.235319 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 55 components and 0.235319 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093060Jy sigma=0.000824 ! Fit after self-cal, rms=0.092887Jy sigma=0.000822 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.414 mas, bmaj=8.9 mas, bpa=-11.3 degrees ! Estimated noise=666.585 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101797 Jy ! Component: 100 - total flux cleaned = 0.0161538 Jy ! Component: 150 - total flux cleaned = 0.0201922 Jy ! Component: 200 - total flux cleaned = 0.0231049 Jy ! Total flux subtracted in 200 components = 0.0231049 Jy ! Clean residual min=-0.007418 max=0.006665 Jy/beam ! Clean residual mean=-0.000067 rms=0.001674 Jy/beam ! Combined flux in latest and established models = 0.258424 Jy ! Performing phase self-cal ! Adding 61 model components to the UV plane model. ! The established model now contains 109 components and 0.258424 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091161Jy sigma=0.000814 ! Fit after self-cal, rms=0.091025Jy sigma=0.000812 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.81 HN 0.96 KP 1.11 ! LA 0.98 MK 0.99 NL 0.96 OV 1.01 ! PT 1.10 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.86 HN 1.01 KP 1.08 ! LA 0.94 MK 1.00 NL 1.09 OV 1.05 ! PT 1.09 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.88 HN 1.02 KP 0.98 ! LA 0.81 MK 1.03 NL 1.18 OV 0.99 ! PT 1.06 SC 1.06 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 0.90 HN 0.99 KP 0.94 ! LA 0.84 MK 1.02 NL 1.03 OV 1.04 ! PT 1.12 SC 0.94 ! ! ! Fit before self-cal, rms=0.091025Jy sigma=0.000812 ! Fit after self-cal, rms=0.085336Jy sigma=0.000780 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.428 mas, bmaj=8.943 mas, bpa=-11.15 degrees ! Estimated noise=667.052 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000407174 Jy ! Component: 100 - total flux cleaned = 0.000780867 Jy ! Component: 150 - total flux cleaned = 0.000981102 Jy ! Component: 200 - total flux cleaned = 0.00116204 Jy ! Total flux subtracted in 200 components = 0.00116204 Jy ! Clean residual min=-0.003649 max=0.003623 Jy/beam ! Clean residual mean=0.000000 rms=0.000901 Jy/beam ! Combined flux in latest and established models = 0.259586 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 126 components and 0.259586 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085295Jy sigma=0.000780 ! Fit after self-cal, rms=0.085254Jy sigma=0.000779 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085254Jy sigma=0.000779 ! Fit after self-cal, rms=0.081857Jy sigma=0.000771 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.437 mas, bmaj=8.91 mas, bpa=-11.16 degrees ! Estimated noise=666.125 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103711 Jy ! Component: 100 - total flux cleaned = 0.0014019 Jy ! Component: 150 - total flux cleaned = 0.00140516 Jy ! Component: 200 - total flux cleaned = 0.00137512 Jy ! Total flux subtracted in 200 components = 0.00137512 Jy ! Clean residual min=-0.002591 max=0.002732 Jy/beam ! Clean residual mean=-0.000001 rms=0.000593 Jy/beam ! Combined flux in latest and established models = 0.260962 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 139 components and 0.260962 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081809Jy sigma=0.000770 ! Fit after self-cal, rms=0.081812Jy sigma=0.000770 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (20, -69.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00223108 Jy ! Component: 100 - total flux cleaned = 0.00306534 Jy ! Component: 150 - total flux cleaned = 0.00331035 Jy ! Component: 200 - total flux cleaned = 0.00343144 Jy ! Total flux subtracted in 200 components = 0.00343144 Jy ! Clean residual min=-0.002613 max=0.002219 Jy/beam ! Clean residual mean=-0.000002 rms=0.000550 Jy/beam ! Combined flux in latest and established models = 0.264393 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 161 components and 0.264393 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081744Jy sigma=0.000769 ! Fit after self-cal, rms=0.081742Jy sigma=0.000769 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081742Jy sigma=0.000769 ! Fit after self-cal, rms=0.081865Jy sigma=0.000769 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.444 mas, bmaj=8.915 mas, bpa=-11.13 degrees ! Estimated noise=667.809 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000190094 Jy ! Component: 100 - total flux cleaned = 0.000308927 Jy ! Component: 150 - total flux cleaned = 0.000468096 Jy ! Component: 200 - total flux cleaned = 0.000564645 Jy ! Total flux subtracted in 200 components = 0.000564645 Jy ! Clean residual min=-0.002506 max=0.002095 Jy/beam ! Clean residual mean=-0.000002 rms=0.000533 Jy/beam ! Combined flux in latest and established models = 0.264958 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 173 components and 0.264958 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081847Jy sigma=0.000769 ! Fit after self-cal, rms=0.081844Jy sigma=0.000769 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000136307 Jy ! Component: 100 - total flux cleaned = 0.000230087 Jy ! Component: 150 - total flux cleaned = 0.000295643 Jy ! Component: 200 - total flux cleaned = 0.000337531 Jy ! Total flux subtracted in 200 components = 0.000337531 Jy ! Clean residual min=-0.002490 max=0.002069 Jy/beam ! Clean residual mean=-0.000002 rms=0.000524 Jy/beam ! Combined flux in latest and established models = 0.265295 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 185 components and 0.265295 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081832Jy sigma=0.000769 ! Fit after self-cal, rms=0.081832Jy sigma=0.000769 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081832Jy sigma=0.000769 ! Fit after self-cal, rms=0.081906Jy sigma=0.000769 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.977 mas, bmaj=13.69 mas, bpa=-3.524 degrees ! Estimated noise=860.899 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000572428 Jy ! Component: 100 - total flux cleaned = 0.000724156 Jy ! Component: 150 - total flux cleaned = 0.000701323 Jy ! Component: 200 - total flux cleaned = 0.000681545 Jy ! Total flux subtracted in 200 components = 0.000681545 Jy ! Clean residual min=-0.002857 max=0.002036 Jy/beam ! Clean residual mean=-0.000004 rms=0.000642 Jy/beam ! Combined flux in latest and established models = 0.265977 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 196 components and 0.265977 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081900Jy sigma=0.000769 ! Fit after self-cal, rms=0.081899Jy sigma=0.000769 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.10948e-06 Jy ! Component: 100 - total flux cleaned = 6.59929e-05 Jy ! Component: 150 - total flux cleaned = 4.85896e-05 Jy ! Component: 200 - total flux cleaned = 4.97399e-05 Jy ! Total flux subtracted in 200 components = 4.97399e-05 Jy ! Clean residual min=-0.002814 max=0.001966 Jy/beam ! Clean residual mean=-0.000004 rms=0.000630 Jy/beam ! Combined flux in latest and established models = 0.266026 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 208 components and 0.266026 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081896Jy sigma=0.000769 ! Fit after self-cal, rms=0.081896Jy sigma=0.000769 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.45 mas, bmaj=8.916 mas, bpa=-11.09 degrees ! Estimated noise=668.869 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.45 x 8.916 at -11.09 degrees (North through East) ! Clean map min=-0.0023347 max=0.16864 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.824 mas, bmaj=7.676 mas, bpa=-10.86 degrees ! Estimated noise=1046.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.126371 Jy ! Component: 100 - total flux cleaned = 0.171772 Jy ! Component: 150 - total flux cleaned = 0.199213 Jy ! Component: 200 - total flux cleaned = 0.217299 Jy ! Total flux subtracted in 200 components = 0.217299 Jy ! Clean residual min=-0.005214 max=0.009823 Jy/beam ! Clean residual mean=-0.000016 rms=0.001565 Jy/beam ! Combined flux in latest and established models = 0.217299 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 36 model components to the UV plane model. ! The established model now contains 36 components and 0.217299 Jy ! Inverting map and beam ! Estimated beam: bmin=3.45 mas, bmaj=8.916 mas, bpa=-11.09 degrees ! Estimated noise=668.869 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0164003 Jy ! Component: 100 - total flux cleaned = 0.0258347 Jy ! Component: 150 - total flux cleaned = 0.0318934 Jy ! Component: 200 - total flux cleaned = 0.0359328 Jy ! Total flux subtracted in 200 components = 0.0359328 Jy ! Clean residual min=-0.002819 max=0.003016 Jy/beam ! Clean residual mean=-0.000002 rms=0.000680 Jy/beam ! Combined flux in latest and established models = 0.253232 Jy ! Adding 73 model components to the UV plane model. ! The established model now contains 97 components and 0.253232 Jy ! Inverting map ! Added new window around map position (-9, -21). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00321553 Jy ! Component: 100 - total flux cleaned = 0.00556246 Jy ! Component: 150 - total flux cleaned = 0.00737785 Jy ! Component: 200 - total flux cleaned = 0.00881394 Jy ! Total flux subtracted in 200 components = 0.00881394 Jy ! Clean residual min=-0.002466 max=0.001885 Jy/beam ! Clean residual mean=-0.000003 rms=0.000519 Jy/beam ! Combined flux in latest and established models = 0.262046 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 145 components and 0.262046 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.977 mas, bmaj=13.69 mas, bpa=-3.524 degrees ! Estimated noise=860.899 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00163002 Jy ! Component: 100 - total flux cleaned = 0.00267741 Jy ! Component: 150 - total flux cleaned = 0.00338386 Jy ! Component: 200 - total flux cleaned = 0.00370532 Jy ! Total flux subtracted in 200 components = 0.00370532 Jy ! Clean residual min=-0.002532 max=0.002003 Jy/beam ! Clean residual mean=-0.000006 rms=0.000596 Jy/beam ! Combined flux in latest and established models = 0.265751 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000170507 Jy ! Component: 100 - total flux cleaned = 0.000265244 Jy ! Component: 150 - total flux cleaned = 0.000334046 Jy ! Component: 200 - total flux cleaned = 0.000381835 Jy ! Total flux subtracted in 200 components = 0.000381835 Jy ! Clean residual min=-0.002460 max=0.001983 Jy/beam ! Clean residual mean=-0.000006 rms=0.000587 Jy/beam ! Combined flux in latest and established models = 0.266133 Jy ! Adding 63 model components to the UV plane model. ! The established model now contains 204 components and 0.266133 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.45 mas, bmaj=8.916 mas, bpa=-11.09 degrees ! Estimated noise=668.869 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000226648 Jy ! Component: 100 - total flux cleaned = -0.000151162 Jy ! Component: 150 - total flux cleaned = -6.01016e-05 Jy ! Component: 200 - total flux cleaned = 4.45935e-05 Jy ! Total flux subtracted in 200 components = 4.45935e-05 Jy ! Clean residual min=-0.002284 max=0.001826 Jy/beam ! Clean residual mean=-0.000003 rms=0.000483 Jy/beam ! Combined flux in latest and established models = 0.266178 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 233 components and 0.266178 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081867Jy sigma=0.000769 ! Fit after self-cal, rms=0.081860Jy sigma=0.000769 wmodel J1334-1150_S_2015_03_17_pus_map.mod ! Writing 233 model components to file: J1334-1150_S_2015_03_17_pus_map.mod wobs J1334-1150_S_2015_03_17_pus_uvs.fits ! Writing UV FITS file: J1334-1150_S_2015_03_17_pus_uvs.fits wwins J1334-1150_S_2015_03_17_pus_map.win ! wwins: Wrote 5 windows to J1334-1150_S_2015_03_17_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00100286 Jy ! Component: 100 - total flux cleaned = -0.00153469 Jy ! Component: 150 - total flux cleaned = -0.00189847 Jy ! Component: 200 - total flux cleaned = -0.00209995 Jy ! Component: 250 - total flux cleaned = -0.00209967 Jy ! Component: 300 - total flux cleaned = -0.00209877 Jy ! Component: 350 - total flux cleaned = -0.00204648 Jy ! Component: 400 - total flux cleaned = -0.00212188 Jy ! Component: 450 - total flux cleaned = -0.00214607 Jy ! Component: 500 - total flux cleaned = -0.00217031 Jy ! Component: 550 - total flux cleaned = -0.00219447 Jy ! Component: 600 - total flux cleaned = -0.00228703 Jy ! Component: 650 - total flux cleaned = -0.00230939 Jy ! Component: 700 - total flux cleaned = -0.00233167 Jy ! Component: 750 - total flux cleaned = -0.00239741 Jy ! Component: 800 - total flux cleaned = -0.00241921 Jy ! Component: 850 - total flux cleaned = -0.00248264 Jy ! Component: 900 - total flux cleaned = -0.00254477 Jy ! Component: 950 - total flux cleaned = -0.00254473 Jy ! Component: 1000 - total flux cleaned = -0.0026047 Jy ! Component: 1050 - total flux cleaned = -0.00264431 Jy ! Component: 1100 - total flux cleaned = -0.0027408 Jy ! Component: 1150 - total flux cleaned = -0.0027596 Jy ! Component: 1200 - total flux cleaned = -0.00277831 Jy ! Component: 1250 - total flux cleaned = -0.00281496 Jy ! Component: 1300 - total flux cleaned = -0.00285086 Jy ! Component: 1350 - total flux cleaned = -0.00285059 Jy ! Component: 1400 - total flux cleaned = -0.00285101 Jy ! Component: 1450 - total flux cleaned = -0.00288581 Jy ! Component: 1500 - total flux cleaned = -0.00283446 Jy ! Component: 1550 - total flux cleaned = -0.00288528 Jy ! Component: 1600 - total flux cleaned = -0.00293519 Jy ! Component: 1650 - total flux cleaned = -0.00293506 Jy ! Component: 1700 - total flux cleaned = -0.00290237 Jy ! Component: 1750 - total flux cleaned = -0.00295079 Jy ! Component: 1800 - total flux cleaned = -0.00291913 Jy ! Component: 1850 - total flux cleaned = -0.00295059 Jy ! Component: 1900 - total flux cleaned = -0.00293501 Jy ! Component: 1950 - total flux cleaned = -0.00295056 Jy ! Component: 2000 - total flux cleaned = -0.00293538 Jy ! Component: 2050 - total flux cleaned = -0.00292026 Jy ! Component: 2100 - total flux cleaned = -0.00297975 Jy ! Component: 2150 - total flux cleaned = -0.00295011 Jy ! Component: 2200 - total flux cleaned = -0.00293551 Jy ! Component: 2250 - total flux cleaned = -0.00294965 Jy ! Component: 2300 - total flux cleaned = -0.00290688 Jy ! Component: 2350 - total flux cleaned = -0.00290703 Jy ! Component: 2400 - total flux cleaned = -0.00293485 Jy ! Component: 2450 - total flux cleaned = -0.002921 Jy ! Component: 2500 - total flux cleaned = -0.00292107 Jy ! Component: 2550 - total flux cleaned = -0.00289408 Jy ! Component: 2600 - total flux cleaned = -0.00290732 Jy ! Component: 2650 - total flux cleaned = -0.00294722 Jy ! Component: 2700 - total flux cleaned = -0.00289462 Jy ! Component: 2750 - total flux cleaned = -0.00292064 Jy ! Component: 2800 - total flux cleaned = -0.00288224 Jy ! Component: 2850 - total flux cleaned = -0.00289518 Jy ! Component: 2900 - total flux cleaned = -0.00289546 Jy ! Component: 2950 - total flux cleaned = -0.00288305 Jy ! Component: 3000 - total flux cleaned = -0.00289572 Jy ! Component: 3050 - total flux cleaned = -0.00292036 Jy ! Component: 3100 - total flux cleaned = -0.00293271 Jy ! Component: 3150 - total flux cleaned = -0.00294492 Jy ! Component: 3200 - total flux cleaned = -0.00296885 Jy ! Component: 3250 - total flux cleaned = -0.00295697 Jy ! Component: 3300 - total flux cleaned = -0.00296889 Jy ! Component: 3350 - total flux cleaned = -0.00299242 Jy ! Component: 3400 - total flux cleaned = -0.00295733 Jy ! Component: 3450 - total flux cleaned = -0.00291121 Jy ! Component: 3500 - total flux cleaned = -0.0029457 Jy ! Component: 3550 - total flux cleaned = -0.00293427 Jy ! Component: 3600 - total flux cleaned = -0.00287758 Jy ! Component: 3650 - total flux cleaned = -0.0028551 Jy ! Component: 3700 - total flux cleaned = -0.00285513 Jy ! Component: 3750 - total flux cleaned = -0.00281086 Jy ! Component: 3800 - total flux cleaned = -0.00278884 Jy ! Component: 3850 - total flux cleaned = -0.00275608 Jy ! Component: 3900 - total flux cleaned = -0.00271261 Jy ! Component: 3950 - total flux cleaned = -0.00266961 Jy ! Component: 4000 - total flux cleaned = -0.00263758 Jy ! Component: 4050 - total flux cleaned = -0.00263768 Jy ! Total flux subtracted in 4096 components = -0.00261654 Jy ! Clean residual min=-0.000573 max=0.000546 Jy/beam ! Clean residual mean=0.000001 rms=0.000198 Jy/beam ! Combined flux in latest and established models = 0.263561 Jy keep ! Adding 304 model components to the UV plane model. ! The established model now contains 537 components and 0.263561 Jy ![Exited script file: muppet] wmap "J1334-1150_S_2015_03_17_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.45 x 8.916 at -11.09 degrees (North through East) ! Clean map min=-0.0017321 max=0.1688 Jy/beam ! Writing clean map to FITS file: J1334-1150_S_2015_03_17_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.1688 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000194419 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.34553 0.34553 0.691059 1.38212 2.76424 5.52848 11.057 22.1139 44.2278 88.4556 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.168 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.45 x 8.916 at -11.09 degrees (North through East) ! Clean map min=-0.0017321 max=0.1688 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1334-1150_S_2015_03_17_pus_uvs.log closed on Fri Dec 30 23:00:25 2016