! Started logfile: J1254+1141_S_2015_03_17_pus_uvs.log on Fri Dec 30 22:58:56 2016 obs J1254+1141_S_2015_03_17_pus_uva.fits ! Reading UV FITS file: J1254+1141_S_2015_03_17_pus_uva.fits ! AN table 1: 14 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.334921 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1254+1141 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 330 lines of history. ! ! Reading 844 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1254+1141_S_2015_03_17_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.476662Jy sigma=0.005621 ! Fit after self-cal, rms=0.414492Jy sigma=0.004634 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.817 mas, bmaj=10.48 mas, bpa=-15.18 degrees ! Estimated noise=3416.02 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.399322 Jy ! Component: 100 - total flux cleaned = 0.532985 Jy ! Total flux subtracted in 100 components = 0.532985 Jy ! Clean residual min=-0.046186 max=0.063079 Jy/beam ! Clean residual mean=-0.000910 rms=0.015838 Jy/beam ! Combined flux in latest and established models = 0.532985 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.532985 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.197399Jy sigma=0.001989 ! Fit after self-cal, rms=0.197401Jy sigma=0.001988 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.764 mas, bmaj=12.51 mas, bpa=-2.116 degrees ! Estimated noise=2247.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.117662 Jy ! Component: 100 - total flux cleaned = 0.168081 Jy ! Component: 150 - total flux cleaned = 0.193758 Jy ! Component: 200 - total flux cleaned = 0.207684 Jy ! Total flux subtracted in 200 components = 0.207684 Jy ! Clean residual min=-0.034837 max=0.035239 Jy/beam ! Clean residual mean=-0.000590 rms=0.009784 Jy/beam ! Combined flux in latest and established models = 0.740669 Jy ! Performing phase self-cal ! Adding 62 model components to the UV plane model. ! The established model now contains 72 components and 0.740669 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113987Jy sigma=0.001123 ! Fit after self-cal, rms=0.113901Jy sigma=0.001122 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.88 HN 1.00* KP 1.11 ! LA 0.97 MK 1.03 NL 1.00* OV 1.06 ! PT 1.05 SC 1.00 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.93 HN 1.00* KP 1.06 ! LA 0.93 MK 1.01 NL 1.00* OV 1.09 ! PT 1.03 SC 1.07 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.00* KP 0.97 ! LA 0.79 MK 1.01 NL 1.00* OV 1.00 ! PT 1.03 SC 1.01 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.08 HN 1.00* KP 0.92 ! LA 0.84 MK 1.00 NL 1.00* OV 1.05 ! PT 1.05 SC 0.94 ! ! ! Fit before self-cal, rms=0.113901Jy sigma=0.001122 ! Fit after self-cal, rms=0.080472Jy sigma=0.000818 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.76 mas, bmaj=12.47 mas, bpa=-2.115 degrees ! Estimated noise=2253.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-20, -10). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0206637 Jy ! Component: 100 - total flux cleaned = 0.0192454 Jy ! Component: 150 - total flux cleaned = 0.0197649 Jy ! Component: 200 - total flux cleaned = 0.0201632 Jy ! Total flux subtracted in 200 components = 0.0201632 Jy ! Clean residual min=-0.010044 max=0.012242 Jy/beam ! Clean residual mean=-0.000006 rms=0.003239 Jy/beam ! Combined flux in latest and established models = 0.760832 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 98 components and 0.760832 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074002Jy sigma=0.000756 ! Fit after self-cal, rms=0.073815Jy sigma=0.000755 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073815Jy sigma=0.000755 ! Fit after self-cal, rms=0.073375Jy sigma=0.000751 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.762 mas, bmaj=12.47 mas, bpa=-1.94 degrees ! Estimated noise=2245.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0037873 Jy ! Component: 100 - total flux cleaned = 0.0043969 Jy ! Component: 150 - total flux cleaned = 0.00428258 Jy ! Component: 200 - total flux cleaned = 0.00407983 Jy ! Total flux subtracted in 200 components = 0.00407983 Jy ! Clean residual min=-0.008346 max=0.010484 Jy/beam ! Clean residual mean=-0.000042 rms=0.002740 Jy/beam ! Combined flux in latest and established models = 0.764912 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 112 components and 0.764912 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072648Jy sigma=0.000745 ! Fit after self-cal, rms=0.072625Jy sigma=0.000744 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00152097 Jy ! Component: 100 - total flux cleaned = 0.0015209 Jy ! Component: 150 - total flux cleaned = 0.00151784 Jy ! Component: 200 - total flux cleaned = 0.00144448 Jy ! Total flux subtracted in 200 components = 0.00144448 Jy ! Clean residual min=-0.008179 max=0.010027 Jy/beam ! Clean residual mean=-0.000034 rms=0.002679 Jy/beam ! Combined flux in latest and established models = 0.766357 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 123 components and 0.766357 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072406Jy sigma=0.000743 ! Fit after self-cal, rms=0.072395Jy sigma=0.000743 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072395Jy sigma=0.000743 ! Fit after self-cal, rms=0.072459Jy sigma=0.000742 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.769 mas, bmaj=12.48 mas, bpa=-1.928 degrees ! Estimated noise=2244.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00040279 Jy ! Component: 100 - total flux cleaned = -2.57352e-05 Jy ! Component: 150 - total flux cleaned = -0.000100175 Jy ! Component: 200 - total flux cleaned = -0.000102014 Jy ! Total flux subtracted in 200 components = -0.000102014 Jy ! Clean residual min=-0.008029 max=0.009973 Jy/beam ! Clean residual mean=-0.000048 rms=0.002532 Jy/beam ! Combined flux in latest and established models = 0.766254 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 131 components and 0.766254 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072263Jy sigma=0.000740 ! Fit after self-cal, rms=0.072256Jy sigma=0.000740 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000498067 Jy ! Component: 100 - total flux cleaned = 0.000498611 Jy ! Component: 150 - total flux cleaned = 0.000498299 Jy ! Component: 200 - total flux cleaned = 0.000497737 Jy ! Total flux subtracted in 200 components = 0.000497737 Jy ! Clean residual min=-0.007971 max=0.009650 Jy/beam ! Clean residual mean=-0.000037 rms=0.002484 Jy/beam ! Combined flux in latest and established models = 0.766752 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 139 components and 0.766752 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072144Jy sigma=0.000739 ! Fit after self-cal, rms=0.072136Jy sigma=0.000739 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072136Jy sigma=0.000739 ! Fit after self-cal, rms=0.072179Jy sigma=0.000738 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.913 mas, bmaj=28.16 mas, bpa=15.67 degrees ! Estimated noise=2463.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000140868 Jy ! Component: 100 - total flux cleaned = -0.000174962 Jy ! Component: 150 - total flux cleaned = -0.00023505 Jy ! Component: 200 - total flux cleaned = -0.000237855 Jy ! Total flux subtracted in 200 components = -0.000237855 Jy ! Clean residual min=-0.008964 max=0.010642 Jy/beam ! Clean residual mean=-0.000060 rms=0.003037 Jy/beam ! Combined flux in latest and established models = 0.766514 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 153 components and 0.766514 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072090Jy sigma=0.000738 ! Fit after self-cal, rms=0.072082Jy sigma=0.000737 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.93901e-05 Jy ! Component: 100 - total flux cleaned = -7.29207e-05 Jy ! Component: 150 - total flux cleaned = 3.04525e-05 Jy ! Component: 200 - total flux cleaned = 7.51944e-05 Jy ! Total flux subtracted in 200 components = 7.51944e-05 Jy ! Clean residual min=-0.008944 max=0.010467 Jy/beam ! Clean residual mean=-0.000051 rms=0.002974 Jy/beam ! Combined flux in latest and established models = 0.76659 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 161 components and 0.76659 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072026Jy sigma=0.000737 ! Fit after self-cal, rms=0.072019Jy sigma=0.000737 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.775 mas, bmaj=12.49 mas, bpa=-1.928 degrees ! Estimated noise=2244.04 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.775 x 12.49 at -1.928 degrees (North through East) ! Clean map min=-0.0085167 max=0.59364 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072019Jy sigma=0.000737 ! Fit after self-cal, rms=0.064631Jy sigma=0.000650 ! Inverting map and beam ! Estimated beam: bmin=4.773 mas, bmaj=12.49 mas, bpa=-2.005 degrees ! Estimated noise=2244.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000414008 Jy ! Component: 100 - total flux cleaned = -0.000611735 Jy ! Component: 150 - total flux cleaned = -0.000728986 Jy ! Component: 200 - total flux cleaned = -0.000727497 Jy ! Total flux subtracted in 200 components = -0.000727497 Jy ! Clean residual min=-0.007475 max=0.008833 Jy/beam ! Clean residual mean=-0.000031 rms=0.002274 Jy/beam ! Combined flux in latest and established models = 0.765862 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 168 components and 0.765862 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064531Jy sigma=0.000648 ! Fit after self-cal, rms=0.064515Jy sigma=0.000648 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.87731e-05 Jy ! Component: 100 - total flux cleaned = -4.77311e-05 Jy ! Component: 150 - total flux cleaned = -0.00014929 Jy ! Component: 200 - total flux cleaned = -0.000196587 Jy ! Total flux subtracted in 200 components = -0.000196587 Jy ! Clean residual min=-0.007459 max=0.008545 Jy/beam ! Clean residual mean=-0.000026 rms=0.002240 Jy/beam ! Combined flux in latest and established models = 0.765666 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 172 components and 0.765666 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064446Jy sigma=0.000647 ! Fit after self-cal, rms=0.064435Jy sigma=0.000647 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064435Jy sigma=0.000647 ! Fit after self-cal, rms=0.064427Jy sigma=0.000647 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.837 mas, bmaj=10.5 mas, bpa=-15.16 degrees ! Estimated noise=3401.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.396923 Jy ! Component: 100 - total flux cleaned = 0.526063 Jy ! Component: 150 - total flux cleaned = 0.595706 Jy ! Component: 200 - total flux cleaned = 0.638722 Jy ! Total flux subtracted in 200 components = 0.638722 Jy ! Clean residual min=-0.020072 max=0.029011 Jy/beam ! Clean residual mean=-0.000467 rms=0.007229 Jy/beam ! Combined flux in latest and established models = 0.638722 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 40 model components to the UV plane model. ! The established model now contains 40 components and 0.638722 Jy ! Inverting map and beam ! Estimated beam: bmin=4.778 mas, bmaj=12.5 mas, bpa=-1.975 degrees ! Estimated noise=2243.6 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0495753 Jy ! Component: 100 - total flux cleaned = 0.0779359 Jy ! Component: 150 - total flux cleaned = 0.0964197 Jy ! Component: 200 - total flux cleaned = 0.108812 Jy ! Total flux subtracted in 200 components = 0.108812 Jy ! Clean residual min=-0.013220 max=0.011967 Jy/beam ! Clean residual mean=-0.000258 rms=0.003605 Jy/beam ! Combined flux in latest and established models = 0.747534 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 93 components and 0.747534 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.927 mas, bmaj=28.13 mas, bpa=15.65 degrees ! Estimated noise=2460.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0105463 Jy ! Component: 100 - total flux cleaned = 0.014203 Jy ! Component: 150 - total flux cleaned = 0.0148385 Jy ! Component: 200 - total flux cleaned = 0.0153761 Jy ! Total flux subtracted in 200 components = 0.0153761 Jy ! Clean residual min=-0.010018 max=0.011677 Jy/beam ! Clean residual mean=-0.000156 rms=0.003279 Jy/beam ! Combined flux in latest and established models = 0.76291 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000463176 Jy ! Component: 100 - total flux cleaned = 0.000993329 Jy ! Component: 150 - total flux cleaned = 0.0014573 Jy ! Component: 200 - total flux cleaned = 0.00186695 Jy ! Total flux subtracted in 200 components = 0.00186695 Jy ! Clean residual min=-0.009025 max=0.011562 Jy/beam ! Clean residual mean=-0.000112 rms=0.003038 Jy/beam ! Combined flux in latest and established models = 0.764777 Jy ! Adding 72 model components to the UV plane model. ! The established model now contains 151 components and 0.764777 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.778 mas, bmaj=12.5 mas, bpa=-1.975 degrees ! Estimated noise=2243.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103803 Jy ! Component: 100 - total flux cleaned = 0.00143567 Jy ! Component: 150 - total flux cleaned = 0.00167777 Jy ! Component: 200 - total flux cleaned = 0.001785 Jy ! Total flux subtracted in 200 components = 0.001785 Jy ! Clean residual min=-0.008488 max=0.010434 Jy/beam ! Clean residual mean=-0.000061 rms=0.002498 Jy/beam ! Combined flux in latest and established models = 0.766562 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 162 components and 0.766562 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065290Jy sigma=0.000655 ! Fit after self-cal, rms=0.065251Jy sigma=0.000655 wmodel J1254+1141_S_2015_03_17_pus_map.mod ! Writing 162 model components to file: J1254+1141_S_2015_03_17_pus_map.mod wobs J1254+1141_S_2015_03_17_pus_uvs.fits ! Writing UV FITS file: J1254+1141_S_2015_03_17_pus_uvs.fits wwins J1254+1141_S_2015_03_17_pus_map.win ! wwins: Wrote 2 windows to J1254+1141_S_2015_03_17_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00209646 Jy ! Component: 100 - total flux cleaned = 0.00182188 Jy ! Component: 150 - total flux cleaned = 0.0014838 Jy ! Component: 200 - total flux cleaned = 0.000889932 Jy ! Component: 250 - total flux cleaned = 0.000701055 Jy ! Component: 300 - total flux cleaned = 0.00101308 Jy ! Component: 350 - total flux cleaned = 0.00159155 Jy ! Component: 400 - total flux cleaned = 0.00192453 Jy ! Component: 450 - total flux cleaned = 0.00198834 Jy ! Component: 500 - total flux cleaned = 0.0019896 Jy ! Component: 550 - total flux cleaned = 0.00187898 Jy ! Component: 600 - total flux cleaned = 0.00193092 Jy ! Component: 650 - total flux cleaned = 0.00177658 Jy ! Component: 700 - total flux cleaned = 0.00142799 Jy ! Component: 750 - total flux cleaned = 0.00108659 Jy ! Component: 800 - total flux cleaned = 0.000753038 Jy ! Component: 850 - total flux cleaned = 0.000380884 Jy ! Component: 900 - total flux cleaned = 6.1245e-05 Jy ! Component: 950 - total flux cleaned = -0.000207045 Jy ! Component: 1000 - total flux cleaned = -0.000557245 Jy ! Component: 1050 - total flux cleaned = -0.000771635 Jy ! Component: 1100 - total flux cleaned = -0.00106679 Jy ! Component: 1150 - total flux cleaned = -0.00115 Jy ! Component: 1200 - total flux cleaned = -0.00123204 Jy ! Component: 1250 - total flux cleaned = -0.00135287 Jy ! Component: 1300 - total flux cleaned = -0.00135289 Jy ! Component: 1350 - total flux cleaned = -0.00135286 Jy ! Component: 1400 - total flux cleaned = -0.00139146 Jy ! Component: 1450 - total flux cleaned = -0.00146778 Jy ! Component: 1500 - total flux cleaned = -0.00142979 Jy ! Component: 1550 - total flux cleaned = -0.0014293 Jy ! Component: 1600 - total flux cleaned = -0.00128085 Jy ! Component: 1650 - total flux cleaned = -0.00120717 Jy ! Component: 1700 - total flux cleaned = -0.00102426 Jy ! Component: 1750 - total flux cleaned = -0.000842924 Jy ! Component: 1800 - total flux cleaned = -0.000625745 Jy ! Component: 1850 - total flux cleaned = -0.000480993 Jy ! Component: 1900 - total flux cleaned = -0.00055354 Jy ! Component: 1950 - total flux cleaned = -0.000662769 Jy ! Component: 2000 - total flux cleaned = -0.000772576 Jy ! Component: 2050 - total flux cleaned = -0.000920116 Jy ! Component: 2100 - total flux cleaned = -0.000957319 Jy ! Component: 2150 - total flux cleaned = -0.000994868 Jy ! Component: 2200 - total flux cleaned = -0.00110777 Jy ! Component: 2250 - total flux cleaned = -0.00118362 Jy ! Component: 2300 - total flux cleaned = -0.00133725 Jy ! Component: 2350 - total flux cleaned = -0.00153245 Jy ! Component: 2400 - total flux cleaned = -0.00161174 Jy ! Component: 2450 - total flux cleaned = -0.00177195 Jy ! Component: 2500 - total flux cleaned = -0.00197571 Jy ! Component: 2550 - total flux cleaned = -0.00214235 Jy ! Component: 2600 - total flux cleaned = -0.00226927 Jy ! Component: 2650 - total flux cleaned = -0.00239748 Jy ! Component: 2700 - total flux cleaned = -0.00257259 Jy ! Component: 2750 - total flux cleaned = -0.00275128 Jy ! Component: 2800 - total flux cleaned = -0.00288748 Jy ! Component: 2850 - total flux cleaned = -0.00307205 Jy ! Component: 2900 - total flux cleaned = -0.00326118 Jy ! Component: 2950 - total flux cleaned = -0.00345414 Jy ! Component: 3000 - total flux cleaned = -0.0036011 Jy ! Component: 3050 - total flux cleaned = -0.00380126 Jy ! Component: 3100 - total flux cleaned = -0.00400495 Jy ! Component: 3150 - total flux cleaned = -0.00421311 Jy ! Component: 3200 - total flux cleaned = -0.00442502 Jy ! Component: 3250 - total flux cleaned = -0.00464215 Jy ! Component: 3300 - total flux cleaned = -0.00486355 Jy ! Component: 3350 - total flux cleaned = -0.00508959 Jy ! Component: 3400 - total flux cleaned = -0.00532034 Jy ! Component: 3450 - total flux cleaned = -0.00549669 Jy ! Component: 3500 - total flux cleaned = -0.00573656 Jy ! Component: 3550 - total flux cleaned = -0.0060438 Jy ! Component: 3600 - total flux cleaned = -0.00623136 Jy ! Component: 3650 - total flux cleaned = -0.00648605 Jy ! Component: 3700 - total flux cleaned = -0.00674545 Jy ! Component: 3750 - total flux cleaned = -0.00707868 Jy ! Component: 3800 - total flux cleaned = -0.00728231 Jy ! Component: 3850 - total flux cleaned = -0.00755908 Jy ! Component: 3900 - total flux cleaned = -0.00791357 Jy ! Component: 3950 - total flux cleaned = -0.00813054 Jy ! Component: 4000 - total flux cleaned = -0.00842568 Jy ! Component: 4050 - total flux cleaned = -0.00865279 Jy ! Total flux subtracted in 4096 components = -0.00896149 Jy ! Clean residual min=-0.004463 max=0.004340 Jy/beam ! Clean residual mean=-0.000109 rms=0.001343 Jy/beam ! Combined flux in latest and established models = 0.7576 Jy keep ! Adding 200 model components to the UV plane model. ! The established model now contains 362 components and 0.757601 Jy ![Exited script file: muppet] wmap "J1254+1141_S_2015_03_17_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.778 x 12.5 at -1.975 degrees (North through East) ! Clean map min=-0.0073221 max=0.59294 Jy/beam ! Writing clean map to FITS file: J1254+1141_S_2015_03_17_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.592938 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00140908 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.712933 0.712933 1.42587 2.85173 5.70346 11.4069 22.8138 45.6277 91.2554 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0042 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.592 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.778 x 12.5 at -1.975 degrees (North through East) ! Clean map min=-0.0073221 max=0.59294 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1254+1141_S_2015_03_17_pus_uvs.log closed on Fri Dec 30 22:59:00 2016