! Started logfile: J1209+4119_S_2015_03_17_pus_uvs.log on Fri Dec 30 22:58:48 2016 obs J1209+4119_S_2015_03_17_pus_uva.fits ! Reading UV FITS file: J1209+4119_S_2015_03_17_pus_uva.fits ! AN table 1: 58 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.672797 visibilities/baseline/integration-bin. ! Found source: J1209+4119 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 330 lines of history. ! ! Reading 7024 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1209+4119_S_2015_03_17_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 102 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 102 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 102 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 102 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.849062Jy sigma=0.009863 ! Fit after self-cal, rms=0.840146Jy sigma=0.009761 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.263 mas, bmaj=8.346 mas, bpa=35.08 degrees ! Estimated noise=1034.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.121609 Jy ! Component: 100 - total flux cleaned = 0.150317 Jy ! Total flux subtracted in 100 components = 0.150317 Jy ! Clean residual min=-0.007661 max=0.010841 Jy/beam ! Clean residual mean=0.000033 rms=0.002030 Jy/beam ! Combined flux in latest and established models = 0.150317 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.150317 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081309Jy sigma=0.000875 ! Fit after self-cal, rms=0.081301Jy sigma=0.000874 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.239 mas, bmaj=8.898 mas, bpa=34.22 degrees ! Estimated noise=741.486 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0157053 Jy ! Component: 100 - total flux cleaned = 0.0254027 Jy ! Component: 150 - total flux cleaned = 0.0318769 Jy ! Component: 200 - total flux cleaned = 0.0362743 Jy ! Total flux subtracted in 200 components = 0.0362743 Jy ! Clean residual min=-0.007000 max=0.005435 Jy/beam ! Clean residual mean=0.000046 rms=0.001454 Jy/beam ! Combined flux in latest and established models = 0.186591 Jy ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 64 components and 0.186591 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077376Jy sigma=0.000838 ! Fit after self-cal, rms=0.077339Jy sigma=0.000838 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.88 HN 1.00* KP 1.12 ! LA 0.93 MK 1.10 NL 0.89 OV 0.98 ! PT 1.04 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.91 HN 1.00* KP 1.07 ! LA 0.95 MK 1.11 NL 1.02 OV 1.05 ! PT 1.11 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.91 HN 1.00* KP 0.92 ! LA 0.79 MK 1.13 NL 1.15 OV 0.96 ! PT 1.08 SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.96 HN 1.00* KP 0.94 ! LA 0.83 MK 1.16 NL 0.98 OV 1.01 ! PT 1.11 SC 1.01 ! ! ! Fit before self-cal, rms=0.077339Jy sigma=0.000838 ! Fit after self-cal, rms=0.072713Jy sigma=0.000807 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.339 mas, bmaj=8.946 mas, bpa=34.55 degrees ! Estimated noise=739.246 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000483441 Jy ! Component: 100 - total flux cleaned = 6.78218e-05 Jy ! Component: 150 - total flux cleaned = -0.000138867 Jy ! Component: 200 - total flux cleaned = -0.000226923 Jy ! Total flux subtracted in 200 components = -0.000226923 Jy ! Clean residual min=-0.003061 max=0.004097 Jy/beam ! Clean residual mean=0.000037 rms=0.000869 Jy/beam ! Combined flux in latest and established models = 0.186364 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 89 components and 0.186364 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072658Jy sigma=0.000806 ! Fit after self-cal, rms=0.072626Jy sigma=0.000806 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072626Jy sigma=0.000806 ! Fit after self-cal, rms=0.072498Jy sigma=0.000803 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.341 mas, bmaj=8.962 mas, bpa=34.55 degrees ! Estimated noise=739.117 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000743885 Jy ! Component: 100 - total flux cleaned = -0.000994267 Jy ! Component: 150 - total flux cleaned = -0.00111172 Jy ! Component: 200 - total flux cleaned = -0.00119356 Jy ! Total flux subtracted in 200 components = -0.00119356 Jy ! Clean residual min=-0.002723 max=0.003794 Jy/beam ! Clean residual mean=0.000019 rms=0.000765 Jy/beam ! Combined flux in latest and established models = 0.18517 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 98 components and 0.18517 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072479Jy sigma=0.000803 ! Fit after self-cal, rms=0.072505Jy sigma=0.000802 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4, -12.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0037337 Jy ! Component: 100 - total flux cleaned = 0.00546673 Jy ! Component: 150 - total flux cleaned = 0.00597016 Jy ! Component: 200 - total flux cleaned = 0.00604506 Jy ! Total flux subtracted in 200 components = 0.00604506 Jy ! Clean residual min=-0.002311 max=0.002585 Jy/beam ! Clean residual mean=0.000017 rms=0.000641 Jy/beam ! Combined flux in latest and established models = 0.191216 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 125 components and 0.191216 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072333Jy sigma=0.000800 ! Fit after self-cal, rms=0.072312Jy sigma=0.000800 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072312Jy sigma=0.000800 ! Fit after self-cal, rms=0.072461Jy sigma=0.000800 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.346 mas, bmaj=8.98 mas, bpa=34.6 degrees ! Estimated noise=739.901 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00113017 Jy ! Component: 100 - total flux cleaned = 0.00123687 Jy ! Component: 150 - total flux cleaned = 0.00129644 Jy ! Component: 200 - total flux cleaned = 0.00127227 Jy ! Total flux subtracted in 200 components = 0.00127227 Jy ! Clean residual min=-0.002240 max=0.002385 Jy/beam ! Clean residual mean=0.000017 rms=0.000597 Jy/beam ! Combined flux in latest and established models = 0.192488 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 152 components and 0.192488 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072429Jy sigma=0.000799 ! Fit after self-cal, rms=0.072428Jy sigma=0.000799 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000615762 Jy ! Component: 100 - total flux cleaned = 0.000619568 Jy ! Component: 150 - total flux cleaned = 0.000558621 Jy ! Component: 200 - total flux cleaned = 0.000520876 Jy ! Total flux subtracted in 200 components = 0.000520876 Jy ! Clean residual min=-0.002222 max=0.002377 Jy/beam ! Clean residual mean=0.000017 rms=0.000584 Jy/beam ! Combined flux in latest and established models = 0.193009 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 166 components and 0.193009 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072415Jy sigma=0.000799 ! Fit after self-cal, rms=0.072413Jy sigma=0.000799 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072413Jy sigma=0.000799 ! Fit after self-cal, rms=0.072461Jy sigma=0.000799 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.744 mas, bmaj=10.18 mas, bpa=23.1 degrees ! Estimated noise=826.952 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000534841 Jy ! Component: 100 - total flux cleaned = 0.000574159 Jy ! Component: 150 - total flux cleaned = 0.00056017 Jy ! Component: 200 - total flux cleaned = 0.00052481 Jy ! Total flux subtracted in 200 components = 0.00052481 Jy ! Clean residual min=-0.002498 max=0.002784 Jy/beam ! Clean residual mean=0.000027 rms=0.000757 Jy/beam ! Combined flux in latest and established models = 0.193534 Jy selfcal ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 200 components and 0.193534 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072455Jy sigma=0.000799 ! Fit after self-cal, rms=0.072455Jy sigma=0.000799 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00028276 Jy ! Component: 100 - total flux cleaned = 0.000236831 Jy ! Component: 150 - total flux cleaned = 0.000197341 Jy ! Component: 200 - total flux cleaned = 0.000171304 Jy ! Total flux subtracted in 200 components = 0.000171304 Jy ! Clean residual min=-0.002485 max=0.002799 Jy/beam ! Clean residual mean=0.000027 rms=0.000752 Jy/beam ! Combined flux in latest and established models = 0.193705 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 216 components and 0.193705 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072452Jy sigma=0.000799 ! Fit after self-cal, rms=0.072451Jy sigma=0.000799 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.35 mas, bmaj=8.988 mas, bpa=34.62 degrees ! Estimated noise=739.652 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.35 x 8.988 at 34.62 degrees (North through East) ! Clean map min=-0.0020561 max=0.15679 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.36 mas, bmaj=8.381 mas, bpa=35.37 degrees ! Estimated noise=1041.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.122293 Jy ! Component: 100 - total flux cleaned = 0.149589 Jy ! Component: 150 - total flux cleaned = 0.160316 Jy ! Component: 200 - total flux cleaned = 0.167189 Jy ! Total flux subtracted in 200 components = 0.167189 Jy ! Clean residual min=-0.003914 max=0.004714 Jy/beam ! Clean residual mean=0.000019 rms=0.000986 Jy/beam ! Combined flux in latest and established models = 0.167189 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.167189 Jy ! Inverting map and beam ! Estimated beam: bmin=4.35 mas, bmaj=8.988 mas, bpa=34.62 degrees ! Estimated noise=739.652 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0069631 Jy ! Component: 100 - total flux cleaned = 0.0116242 Jy ! Component: 150 - total flux cleaned = 0.0149674 Jy ! Component: 200 - total flux cleaned = 0.0174569 Jy ! Total flux subtracted in 200 components = 0.0174569 Jy ! Clean residual min=-0.002158 max=0.002450 Jy/beam ! Clean residual mean=0.000020 rms=0.000655 Jy/beam ! Combined flux in latest and established models = 0.184646 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 88 components and 0.184646 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.744 mas, bmaj=10.18 mas, bpa=23.1 degrees ! Estimated noise=826.952 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00250847 Jy ! Component: 100 - total flux cleaned = 0.00423163 Jy ! Component: 150 - total flux cleaned = 0.0055257 Jy ! Component: 200 - total flux cleaned = 0.00651611 Jy ! Total flux subtracted in 200 components = 0.00651611 Jy ! Clean residual min=-0.002485 max=0.002983 Jy/beam ! Clean residual mean=0.000028 rms=0.000774 Jy/beam ! Combined flux in latest and established models = 0.191162 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000506543 Jy ! Component: 100 - total flux cleaned = 0.000902275 Jy ! Component: 150 - total flux cleaned = 0.00125412 Jy ! Component: 200 - total flux cleaned = 0.0015296 Jy ! Total flux subtracted in 200 components = 0.0015296 Jy ! Clean residual min=-0.002435 max=0.002903 Jy/beam ! Clean residual mean=0.000027 rms=0.000756 Jy/beam ! Combined flux in latest and established models = 0.192692 Jy ! Adding 93 model components to the UV plane model. ! The established model now contains 172 components and 0.192692 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.35 mas, bmaj=8.988 mas, bpa=34.62 degrees ! Estimated noise=739.652 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.85306e-05 Jy ! Component: 100 - total flux cleaned = 0.00020049 Jy ! Component: 150 - total flux cleaned = 0.000256159 Jy ! Component: 200 - total flux cleaned = 0.000344626 Jy ! Total flux subtracted in 200 components = 0.000344626 Jy ! Clean residual min=-0.002128 max=0.002478 Jy/beam ! Clean residual mean=0.000017 rms=0.000575 Jy/beam ! Combined flux in latest and established models = 0.193036 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 188 components and 0.193036 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072464Jy sigma=0.000799 ! Fit after self-cal, rms=0.072459Jy sigma=0.000799 wmodel J1209+4119_S_2015_03_17_pus_map.mod ! Writing 188 model components to file: J1209+4119_S_2015_03_17_pus_map.mod wobs J1209+4119_S_2015_03_17_pus_uvs.fits ! Writing UV FITS file: J1209+4119_S_2015_03_17_pus_uvs.fits wwins J1209+4119_S_2015_03_17_pus_map.win ! wwins: Wrote 2 windows to J1209+4119_S_2015_03_17_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000868288 Jy ! Component: 100 - total flux cleaned = 0.0014952 Jy ! Component: 150 - total flux cleaned = 0.00190237 Jy ! Component: 200 - total flux cleaned = 0.00228426 Jy ! Component: 250 - total flux cleaned = 0.00249642 Jy ! Component: 300 - total flux cleaned = 0.00272986 Jy ! Component: 350 - total flux cleaned = 0.00295568 Jy ! Component: 400 - total flux cleaned = 0.00309296 Jy ! Component: 450 - total flux cleaned = 0.00317377 Jy ! Component: 500 - total flux cleaned = 0.00333078 Jy ! Component: 550 - total flux cleaned = 0.00345763 Jy ! Component: 600 - total flux cleaned = 0.0034822 Jy ! Component: 650 - total flux cleaned = 0.00353119 Jy ! Component: 700 - total flux cleaned = 0.00365 Jy ! Component: 750 - total flux cleaned = 0.00369611 Jy ! Component: 800 - total flux cleaned = 0.00374106 Jy ! Component: 850 - total flux cleaned = 0.00376311 Jy ! Component: 900 - total flux cleaned = 0.00378492 Jy ! Component: 950 - total flux cleaned = 0.00378534 Jy ! Component: 1000 - total flux cleaned = 0.00382754 Jy ! Component: 1050 - total flux cleaned = 0.00378628 Jy ! Component: 1100 - total flux cleaned = 0.00378691 Jy ! Component: 1150 - total flux cleaned = 0.00380667 Jy ! Component: 1200 - total flux cleaned = 0.0037672 Jy ! Component: 1250 - total flux cleaned = 0.00380593 Jy ! Component: 1300 - total flux cleaned = 0.00382446 Jy ! Component: 1350 - total flux cleaned = 0.00380566 Jy ! Component: 1400 - total flux cleaned = 0.00389799 Jy ! Component: 1450 - total flux cleaned = 0.00389787 Jy ! Component: 1500 - total flux cleaned = 0.00396926 Jy ! Component: 1550 - total flux cleaned = 0.00395141 Jy ! Component: 1600 - total flux cleaned = 0.00400346 Jy ! Component: 1650 - total flux cleaned = 0.00407208 Jy ! Component: 1700 - total flux cleaned = 0.00408897 Jy ! Component: 1750 - total flux cleaned = 0.00415581 Jy ! Component: 1800 - total flux cleaned = 0.00428737 Jy ! Component: 1850 - total flux cleaned = 0.0043843 Jy ! Component: 1900 - total flux cleaned = 0.00446389 Jy ! Component: 1950 - total flux cleaned = 0.00449529 Jy ! Component: 2000 - total flux cleaned = 0.0045733 Jy ! Component: 2050 - total flux cleaned = 0.00466517 Jy ! Component: 2100 - total flux cleaned = 0.00474112 Jy ! Component: 2150 - total flux cleaned = 0.0048311 Jy ! Component: 2200 - total flux cleaned = 0.00494924 Jy ! Component: 2250 - total flux cleaned = 0.00499302 Jy ! Component: 2300 - total flux cleaned = 0.00503645 Jy ! Component: 2350 - total flux cleaned = 0.00510792 Jy ! Component: 2400 - total flux cleaned = 0.00517863 Jy ! Component: 2450 - total flux cleaned = 0.00524852 Jy ! Component: 2500 - total flux cleaned = 0.00529013 Jy ! Component: 2550 - total flux cleaned = 0.00539995 Jy ! Component: 2600 - total flux cleaned = 0.00544084 Jy ! Component: 2650 - total flux cleaned = 0.00549446 Jy ! Component: 2700 - total flux cleaned = 0.00556091 Jy ! Component: 2750 - total flux cleaned = 0.00557423 Jy ! Component: 2800 - total flux cleaned = 0.00561358 Jy ! Component: 2850 - total flux cleaned = 0.00567832 Jy ! Component: 2900 - total flux cleaned = 0.00570379 Jy ! Component: 2950 - total flux cleaned = 0.00572945 Jy ! Component: 3000 - total flux cleaned = 0.00579233 Jy ! Component: 3050 - total flux cleaned = 0.00579217 Jy ! Component: 3100 - total flux cleaned = 0.00581688 Jy ! Component: 3150 - total flux cleaned = 0.00582931 Jy ! Component: 3200 - total flux cleaned = 0.00585371 Jy ! Component: 3250 - total flux cleaned = 0.00584162 Jy ! Component: 3300 - total flux cleaned = 0.00587755 Jy ! Component: 3350 - total flux cleaned = 0.00586587 Jy ! Component: 3400 - total flux cleaned = 0.00588935 Jy ! Component: 3450 - total flux cleaned = 0.00590095 Jy ! Component: 3500 - total flux cleaned = 0.00587774 Jy ! Component: 3550 - total flux cleaned = 0.00588917 Jy ! Component: 3600 - total flux cleaned = 0.00586642 Jy ! Component: 3650 - total flux cleaned = 0.00588898 Jy ! Component: 3700 - total flux cleaned = 0.00588897 Jy ! Component: 3750 - total flux cleaned = 0.00587802 Jy ! Component: 3800 - total flux cleaned = 0.00586703 Jy ! Component: 3850 - total flux cleaned = 0.00587795 Jy ! Component: 3900 - total flux cleaned = 0.0058561 Jy ! Component: 3950 - total flux cleaned = 0.0058562 Jy ! Component: 4000 - total flux cleaned = 0.00585621 Jy ! Component: 4050 - total flux cleaned = 0.00585607 Jy ! Total flux subtracted in 4096 components = 0.00583487 Jy ! Clean residual min=-0.000596 max=0.000633 Jy/beam ! Clean residual mean=0.000003 rms=0.000205 Jy/beam ! Combined flux in latest and established models = 0.198871 Jy keep ! Adding 295 model components to the UV plane model. ! The established model now contains 483 components and 0.198871 Jy ![Exited script file: muppet] wmap "J1209+4119_S_2015_03_17_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.35 x 8.988 at 34.62 degrees (North through East) ! Clean map min=-0.0015085 max=0.15797 Jy/beam ! Writing clean map to FITS file: J1209+4119_S_2015_03_17_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.157966 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000198616 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.377201 0.377201 0.754402 1.5088 3.01761 6.03521 12.0704 24.1409 48.2817 96.5634 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.157 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.35 x 8.988 at 34.62 degrees (North through East) ! Clean map min=-0.0015085 max=0.15797 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1209+4119_S_2015_03_17_pus_uvs.log closed on Fri Dec 30 22:58:52 2016