! Started logfile: J1203+4632_S_2015_03_17_pus_uvs.log on Fri Dec 30 22:58:37 2016 obs J1203+4632_S_2015_03_17_pus_uva.fits ! Reading UV FITS file: J1203+4632_S_2015_03_17_pus_uva.fits ! AN table 1: 122 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.879235 visibilities/baseline/integration-bin. ! Found source: J1203+4632 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 330 lines of history. ! ! Reading 19308 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1203+4632_S_2015_03_17_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.910460Jy sigma=0.010990 ! Fit after self-cal, rms=0.880697Jy sigma=0.010650 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.209 mas, bmaj=3.959 mas, bpa=9.158 degrees ! Estimated noise=857.683 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0865696 Jy ! Component: 100 - total flux cleaned = 0.117559 Jy ! Total flux subtracted in 100 components = 0.117559 Jy ! Clean residual min=-0.014612 max=0.037148 Jy/beam ! Clean residual mean=-0.000008 rms=0.003832 Jy/beam ! Combined flux in latest and established models = 0.117559 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.117559 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105439Jy sigma=0.001174 ! Fit after self-cal, rms=0.105326Jy sigma=0.001173 ! Inverting map ! Added new window around map position (-4, -5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0330459 Jy ! Component: 100 - total flux cleaned = 0.0507754 Jy ! Total flux subtracted in 100 components = 0.0507754 Jy ! Clean residual min=-0.010705 max=0.019728 Jy/beam ! Clean residual mean=-0.000001 rms=0.002758 Jy/beam ! Combined flux in latest and established models = 0.168334 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 34 components and 0.168334 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090296Jy sigma=0.000993 ! Fit after self-cal, rms=0.089062Jy sigma=0.000978 ! Inverting map ! Added new window around map position (-6.5, -12). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0211068 Jy ! Component: 100 - total flux cleaned = 0.0336872 Jy ! Total flux subtracted in 100 components = 0.0336872 Jy ! Clean residual min=-0.009085 max=0.010606 Jy/beam ! Clean residual mean=0.000002 rms=0.002047 Jy/beam ! Combined flux in latest and established models = 0.202022 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 51 components and 0.202022 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081832Jy sigma=0.000896 ! Fit after self-cal, rms=0.080955Jy sigma=0.000885 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.973 mas, bmaj=4.972 mas, bpa=8.732 degrees ! Estimated noise=431.045 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0167827 Jy ! Component: 100 - total flux cleaned = 0.0266494 Jy ! Component: 150 - total flux cleaned = 0.0336693 Jy ! Component: 200 - total flux cleaned = 0.0390627 Jy ! Total flux subtracted in 200 components = 0.0390627 Jy ! Clean residual min=-0.007269 max=0.009759 Jy/beam ! Clean residual mean=0.000026 rms=0.001849 Jy/beam ! Combined flux in latest and established models = 0.241084 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 83 components and 0.241084 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076407Jy sigma=0.000840 ! Fit after self-cal, rms=0.075941Jy sigma=0.000835 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.87 HN 0.97 KP 1.05 ! LA 0.94 MK 1.05 NL 0.95 OV 1.01 ! PT 1.02 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.92 HN 1.02 KP 1.03 ! LA 0.92 MK 1.12 NL 1.05 OV 1.04 ! PT 1.01 SC 1.08 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.92 HN 1.02 KP 0.92 ! LA 0.77 MK 1.15 NL 1.20 OV 0.98 ! PT 1.01 SC 1.08 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.94 HN 0.99 KP 0.90 ! LA 0.85 MK 1.17 NL 1.06 OV 1.04 ! PT 1.07 SC 0.99 ! ! ! Fit before self-cal, rms=0.075941Jy sigma=0.000835 ! Fit after self-cal, rms=0.071704Jy sigma=0.000809 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.075 mas, bmaj=5.142 mas, bpa=10.25 degrees ! Estimated noise=433.744 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-27, 16.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00968805 Jy ! Component: 100 - total flux cleaned = 0.0155789 Jy ! Component: 150 - total flux cleaned = 0.0193008 Jy ! Component: 200 - total flux cleaned = 0.0216326 Jy ! Total flux subtracted in 200 components = 0.0216326 Jy ! Clean residual min=-0.004240 max=0.004830 Jy/beam ! Clean residual mean=0.000019 rms=0.001052 Jy/beam ! Combined flux in latest and established models = 0.262717 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 130 components and 0.262717 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070189Jy sigma=0.000790 ! Fit after self-cal, rms=0.070018Jy sigma=0.000788 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070018Jy sigma=0.000788 ! Fit after self-cal, rms=0.071169Jy sigma=0.000784 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.074 mas, bmaj=5.103 mas, bpa=9.849 degrees ! Estimated noise=434.888 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00350316 Jy ! Component: 100 - total flux cleaned = 0.0054984 Jy ! Component: 150 - total flux cleaned = 0.00712206 Jy ! Component: 200 - total flux cleaned = 0.00777014 Jy ! Total flux subtracted in 200 components = 0.00777014 Jy ! Clean residual min=-0.003186 max=0.003994 Jy/beam ! Clean residual mean=0.000009 rms=0.000791 Jy/beam ! Combined flux in latest and established models = 0.270487 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 161 components and 0.270487 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070849Jy sigma=0.000780 ! Fit after self-cal, rms=0.070843Jy sigma=0.000780 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-11.5, 7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00415997 Jy ! Component: 100 - total flux cleaned = 0.00622653 Jy ! Component: 150 - total flux cleaned = 0.0073563 Jy ! Component: 200 - total flux cleaned = 0.00826088 Jy ! Total flux subtracted in 200 components = 0.00826088 Jy ! Clean residual min=-0.002594 max=0.003208 Jy/beam ! Clean residual mean=0.000009 rms=0.000642 Jy/beam ! Combined flux in latest and established models = 0.278748 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 189 components and 0.278748 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070523Jy sigma=0.000776 ! Fit after self-cal, rms=0.070500Jy sigma=0.000775 ! Inverting map ! Added new window around map position (-20, 29.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0027171 Jy ! Component: 100 - total flux cleaned = 0.00414688 Jy ! Component: 150 - total flux cleaned = 0.00523474 Jy ! Component: 200 - total flux cleaned = 0.00578166 Jy ! Total flux subtracted in 200 components = 0.00578166 Jy ! Clean residual min=-0.002438 max=0.002400 Jy/beam ! Clean residual mean=0.000008 rms=0.000535 Jy/beam ! Combined flux in latest and established models = 0.284529 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 223 components and 0.28453 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070333Jy sigma=0.000773 ! Fit after self-cal, rms=0.070323Jy sigma=0.000773 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070323Jy sigma=0.000773 ! Fit after self-cal, rms=0.069807Jy sigma=0.000773 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.082 mas, bmaj=5.09 mas, bpa=9.223 degrees ! Estimated noise=431.846 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00157864 Jy ! Component: 100 - total flux cleaned = 0.0028866 Jy ! Component: 150 - total flux cleaned = 0.00397182 Jy ! Component: 200 - total flux cleaned = 0.00479093 Jy ! Total flux subtracted in 200 components = 0.00479093 Jy ! Clean residual min=-0.002168 max=0.001766 Jy/beam ! Clean residual mean=0.000003 rms=0.000443 Jy/beam ! Combined flux in latest and established models = 0.28932 Jy selfcal ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 250 components and 0.28932 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069708Jy sigma=0.000771 ! Fit after self-cal, rms=0.069707Jy sigma=0.000771 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000900189 Jy ! Component: 100 - total flux cleaned = 0.00155899 Jy ! Component: 150 - total flux cleaned = 0.00211976 Jy ! Component: 200 - total flux cleaned = 0.00259914 Jy ! Total flux subtracted in 200 components = 0.00259914 Jy ! Clean residual min=-0.002019 max=0.001622 Jy/beam ! Clean residual mean=0.000002 rms=0.000409 Jy/beam ! Combined flux in latest and established models = 0.29192 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 263 components and 0.29192 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069654Jy sigma=0.000771 ! Fit after self-cal, rms=0.069653Jy sigma=0.000771 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069653Jy sigma=0.000771 ! Fit after self-cal, rms=0.069330Jy sigma=0.000771 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.036 mas, bmaj=9.379 mas, bpa=13.9 degrees ! Estimated noise=529.771 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00155197 Jy ! Component: 100 - total flux cleaned = 0.00248382 Jy ! Component: 150 - total flux cleaned = 0.00322729 Jy ! Component: 200 - total flux cleaned = 0.00383603 Jy ! Total flux subtracted in 200 components = 0.00383603 Jy ! Clean residual min=-0.001445 max=0.001516 Jy/beam ! Clean residual mean=0.000000 rms=0.000400 Jy/beam ! Combined flux in latest and established models = 0.295756 Jy selfcal ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 299 components and 0.295756 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069298Jy sigma=0.000770 ! Fit after self-cal, rms=0.069295Jy sigma=0.000770 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000507062 Jy ! Component: 100 - total flux cleaned = 0.0010262 Jy ! Component: 150 - total flux cleaned = 0.00134225 Jy ! Component: 200 - total flux cleaned = 0.00163547 Jy ! Total flux subtracted in 200 components = 0.00163547 Jy ! Clean residual min=-0.001281 max=0.001363 Jy/beam ! Clean residual mean=-0.000000 rms=0.000366 Jy/beam ! Combined flux in latest and established models = 0.297391 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 313 components and 0.297391 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069285Jy sigma=0.000770 ! Fit after self-cal, rms=0.069284Jy sigma=0.000770 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.083 mas, bmaj=5.077 mas, bpa=8.688 degrees ! Estimated noise=430.165 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.083 x 5.077 at 8.688 degrees (North through East) ! Clean map min=-0.0016401 max=0.098183 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.293 mas, bmaj=4.044 mas, bpa=9.434 degrees ! Estimated noise=871.555 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.091996 Jy ! Component: 100 - total flux cleaned = 0.133933 Jy ! Component: 150 - total flux cleaned = 0.159857 Jy ! Component: 200 - total flux cleaned = 0.178115 Jy ! Total flux subtracted in 200 components = 0.178115 Jy ! Clean residual min=-0.006274 max=0.010404 Jy/beam ! Clean residual mean=-0.000003 rms=0.001899 Jy/beam ! Combined flux in latest and established models = 0.178115 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 48 model components to the UV plane model. ! The established model now contains 48 components and 0.178115 Jy ! Inverting map and beam ! Estimated beam: bmin=4.083 mas, bmaj=5.077 mas, bpa=8.688 degrees ! Estimated noise=430.165 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0192934 Jy ! Component: 100 - total flux cleaned = 0.0326208 Jy ! Component: 150 - total flux cleaned = 0.0429092 Jy ! Component: 200 - total flux cleaned = 0.0513105 Jy ! Total flux subtracted in 200 components = 0.0513105 Jy ! Clean residual min=-0.003828 max=0.005190 Jy/beam ! Clean residual mean=0.000006 rms=0.001337 Jy/beam ! Combined flux in latest and established models = 0.229426 Jy ! Adding 94 model components to the UV plane model. ! The established model now contains 133 components and 0.229426 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.036 mas, bmaj=9.379 mas, bpa=13.9 degrees ! Estimated noise=529.771 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0128328 Jy ! Component: 100 - total flux cleaned = 0.0224904 Jy ! Component: 150 - total flux cleaned = 0.0300232 Jy ! Component: 200 - total flux cleaned = 0.0361106 Jy ! Total flux subtracted in 200 components = 0.0361106 Jy ! Clean residual min=-0.002804 max=0.003704 Jy/beam ! Clean residual mean=0.000006 rms=0.001121 Jy/beam ! Combined flux in latest and established models = 0.265536 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00500717 Jy ! Component: 100 - total flux cleaned = 0.00916559 Jy ! Component: 150 - total flux cleaned = 0.012649 Jy ! Component: 200 - total flux cleaned = 0.0155819 Jy ! Total flux subtracted in 200 components = 0.0155819 Jy ! Clean residual min=-0.001939 max=0.002210 Jy/beam ! Clean residual mean=0.000003 rms=0.000642 Jy/beam ! Combined flux in latest and established models = 0.281118 Jy ! Adding 170 model components to the UV plane model. ! The established model now contains 283 components and 0.281119 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.083 mas, bmaj=5.077 mas, bpa=8.688 degrees ! Estimated noise=430.165 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00240802 Jy ! Component: 100 - total flux cleaned = 0.00405114 Jy ! Component: 150 - total flux cleaned = 0.00547099 Jy ! Component: 200 - total flux cleaned = 0.0067774 Jy ! Total flux subtracted in 200 components = 0.0067774 Jy ! Clean residual min=-0.002037 max=0.002226 Jy/beam ! Clean residual mean=0.000000 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 0.287896 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 306 components and 0.287896 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069487Jy sigma=0.000773 ! Fit after self-cal, rms=0.069449Jy sigma=0.000772 wmodel J1203+4632_S_2015_03_17_pus_map.mod ! Writing 306 model components to file: J1203+4632_S_2015_03_17_pus_map.mod wobs J1203+4632_S_2015_03_17_pus_uvs.fits ! Writing UV FITS file: J1203+4632_S_2015_03_17_pus_uvs.fits wwins J1203+4632_S_2015_03_17_pus_map.win ! wwins: Wrote 6 windows to J1203+4632_S_2015_03_17_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000601522 Jy ! Component: 100 - total flux cleaned = 0.000728862 Jy ! Component: 150 - total flux cleaned = 0.000787718 Jy ! Component: 200 - total flux cleaned = 0.000956347 Jy ! Component: 250 - total flux cleaned = 0.00117331 Jy ! Component: 300 - total flux cleaned = 0.00138299 Jy ! Component: 350 - total flux cleaned = 0.00158675 Jy ! Component: 400 - total flux cleaned = 0.00163708 Jy ! Component: 450 - total flux cleaned = 0.00173415 Jy ! Component: 500 - total flux cleaned = 0.0018758 Jy ! Component: 550 - total flux cleaned = 0.00199096 Jy ! Component: 600 - total flux cleaned = 0.00203596 Jy ! Component: 650 - total flux cleaned = 0.00205826 Jy ! Component: 700 - total flux cleaned = 0.00205829 Jy ! Component: 750 - total flux cleaned = 0.00212264 Jy ! Component: 800 - total flux cleaned = 0.0020813 Jy ! Component: 850 - total flux cleaned = 0.00216414 Jy ! Component: 900 - total flux cleaned = 0.00220481 Jy ! Component: 950 - total flux cleaned = 0.00220478 Jy ! Component: 1000 - total flux cleaned = 0.00220462 Jy ! Component: 1050 - total flux cleaned = 0.00218516 Jy ! Component: 1100 - total flux cleaned = 0.00224229 Jy ! Component: 1150 - total flux cleaned = 0.00220474 Jy ! Component: 1200 - total flux cleaned = 0.00220517 Jy ! Component: 1250 - total flux cleaned = 0.00222366 Jy ! Component: 1300 - total flux cleaned = 0.0022057 Jy ! Component: 1350 - total flux cleaned = 0.00224206 Jy ! Component: 1400 - total flux cleaned = 0.00227756 Jy ! Component: 1450 - total flux cleaned = 0.0022948 Jy ! Component: 1500 - total flux cleaned = 0.00226006 Jy ! Component: 1550 - total flux cleaned = 0.00220953 Jy ! Component: 1600 - total flux cleaned = 0.00220965 Jy ! Component: 1650 - total flux cleaned = 0.00224237 Jy ! Component: 1700 - total flux cleaned = 0.00224238 Jy ! Component: 1750 - total flux cleaned = 0.00224231 Jy ! Component: 1800 - total flux cleaned = 0.00222626 Jy ! Component: 1850 - total flux cleaned = 0.00221064 Jy ! Component: 1900 - total flux cleaned = 0.00217974 Jy ! Component: 1950 - total flux cleaned = 0.00214918 Jy ! Component: 2000 - total flux cleaned = 0.00217962 Jy ! Component: 2050 - total flux cleaned = 0.00214931 Jy ! Component: 2100 - total flux cleaned = 0.00211953 Jy ! Component: 2150 - total flux cleaned = 0.00206088 Jy ! Component: 2200 - total flux cleaned = 0.00209016 Jy ! Component: 2250 - total flux cleaned = 0.00204733 Jy ! Component: 2300 - total flux cleaned = 0.00207582 Jy ! Component: 2350 - total flux cleaned = 0.00204754 Jy ! Component: 2400 - total flux cleaned = 0.00197824 Jy ! Component: 2450 - total flux cleaned = 0.00197805 Jy ! Component: 2500 - total flux cleaned = 0.00193729 Jy ! Component: 2550 - total flux cleaned = 0.0019778 Jy ! Component: 2600 - total flux cleaned = 0.00197776 Jy ! Component: 2650 - total flux cleaned = 0.00197776 Jy ! Component: 2700 - total flux cleaned = 0.00197789 Jy ! Component: 2750 - total flux cleaned = 0.00196478 Jy ! Component: 2800 - total flux cleaned = 0.00196491 Jy ! Component: 2850 - total flux cleaned = 0.00196496 Jy ! Component: 2900 - total flux cleaned = 0.00202807 Jy ! Component: 2950 - total flux cleaned = 0.00206538 Jy ! Component: 3000 - total flux cleaned = 0.00209007 Jy ! Component: 3050 - total flux cleaned = 0.00210218 Jy ! Component: 3100 - total flux cleaned = 0.00213869 Jy ! Component: 3150 - total flux cleaned = 0.00217473 Jy ! Component: 3200 - total flux cleaned = 0.00218665 Jy ! Component: 3250 - total flux cleaned = 0.00217523 Jy ! Component: 3300 - total flux cleaned = 0.00228053 Jy ! Component: 3350 - total flux cleaned = 0.0022806 Jy ! Component: 3400 - total flux cleaned = 0.00226902 Jy ! Component: 3450 - total flux cleaned = 0.0023259 Jy ! Component: 3500 - total flux cleaned = 0.00233741 Jy ! Component: 3550 - total flux cleaned = 0.00235971 Jy ! Component: 3600 - total flux cleaned = 0.00238197 Jy ! Component: 3650 - total flux cleaned = 0.00238198 Jy ! Component: 3700 - total flux cleaned = 0.00237106 Jy ! Component: 3750 - total flux cleaned = 0.00240364 Jy ! Component: 3800 - total flux cleaned = 0.00240373 Jy ! Component: 3850 - total flux cleaned = 0.002393 Jy ! Component: 3900 - total flux cleaned = 0.0023825 Jy ! Component: 3950 - total flux cleaned = 0.00242452 Jy ! Component: 4000 - total flux cleaned = 0.00243491 Jy ! Component: 4050 - total flux cleaned = 0.00240379 Jy ! Total flux subtracted in 4096 components = 0.00243462 Jy ! Clean residual min=-0.000589 max=0.000659 Jy/beam ! Clean residual mean=-0.000001 rms=0.000185 Jy/beam ! Combined flux in latest and established models = 0.290331 Jy keep ! Adding 264 model components to the UV plane model. ! The established model now contains 567 components and 0.290331 Jy ![Exited script file: muppet] wmap "J1203+4632_S_2015_03_17_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.083 x 5.077 at 8.688 degrees (North through East) ! Clean map min=-0.0011911 max=0.098602 Jy/beam ! Writing clean map to FITS file: J1203+4632_S_2015_03_17_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0986018 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00018294 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.556602 0.556602 1.1132 2.22641 4.45281 8.90563 17.8113 35.6225 71.245 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.098 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.083 x 5.077 at 8.688 degrees (North through East) ! Clean map min=-0.0011911 max=0.098602 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1203+4632_S_2015_03_17_pus_uvs.log closed on Fri Dec 30 22:58:43 2016