! Started logfile: J1146+0458_S_2015_03_17_pus_uvs.log on Fri Dec 30 22:58:08 2016 obs J1146+0458_S_2015_03_17_pus_uva.fits ! Reading UV FITS file: J1146+0458_S_2015_03_17_pus_uva.fits ! AN table 1: 123 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.796748 visibilities/baseline/integration-bin. ! Found source: J1146+0458 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 330 lines of history. ! ! Reading 17640 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1146+0458_S_2015_03_17_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 134 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 134 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 134 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 134 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.963193Jy sigma=0.011368 ! Fit after self-cal, rms=0.906260Jy sigma=0.010728 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.658 mas, bmaj=6.756 mas, bpa=-7.648 degrees ! Estimated noise=582.966 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0679164 Jy ! Component: 100 - total flux cleaned = 0.0860226 Jy ! Total flux subtracted in 100 components = 0.0860226 Jy ! Clean residual min=-0.004711 max=0.010664 Jy/beam ! Clean residual mean=-0.000049 rms=0.001275 Jy/beam ! Combined flux in latest and established models = 0.0860226 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0860226 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074770Jy sigma=0.000817 ! Fit after self-cal, rms=0.074719Jy sigma=0.000816 ! Inverting map ! Added new window around map position (-4, -0.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0110175 Jy ! Component: 100 - total flux cleaned = 0.0175822 Jy ! Total flux subtracted in 100 components = 0.0175822 Jy ! Clean residual min=-0.003546 max=0.005873 Jy/beam ! Clean residual mean=-0.000038 rms=0.000891 Jy/beam ! Combined flux in latest and established models = 0.103605 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 36 components and 0.103605 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072009Jy sigma=0.000790 ! Fit after self-cal, rms=0.071934Jy sigma=0.000790 ! Inverting map ! Added new window around map position (-10.5, -3.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00586508 Jy ! Component: 100 - total flux cleaned = 0.00968911 Jy ! Total flux subtracted in 100 components = 0.00968911 Jy ! Clean residual min=-0.002881 max=0.003419 Jy/beam ! Clean residual mean=-0.000031 rms=0.000729 Jy/beam ! Combined flux in latest and established models = 0.113294 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 59 components and 0.113294 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071114Jy sigma=0.000782 ! Fit after self-cal, rms=0.071077Jy sigma=0.000782 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.334 mas, bmaj=7.744 mas, bpa=-7.107 degrees ! Estimated noise=458.063 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00471687 Jy ! Component: 100 - total flux cleaned = 0.00771973 Jy ! Component: 150 - total flux cleaned = 0.00974685 Jy ! Component: 200 - total flux cleaned = 0.0111755 Jy ! Total flux subtracted in 200 components = 0.0111755 Jy ! Clean residual min=-0.002783 max=0.003435 Jy/beam ! Clean residual mean=-0.000056 rms=0.000776 Jy/beam ! Combined flux in latest and established models = 0.124469 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 86 components and 0.124469 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070592Jy sigma=0.000779 ! Fit after self-cal, rms=0.070554Jy sigma=0.000779 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.91 HN 0.93 KP 1.12 ! LA 0.96 MK 0.98 NL 0.93 OV 1.02 ! PT 1.07 SC 1.04 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.92 HN 0.98 KP 1.10 ! LA 0.93 MK 1.07 NL 1.02 OV 1.06 ! PT 1.07 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.92 HN 0.98 KP 0.97 ! LA 0.77 MK 1.05 NL 1.15 OV 1.00 ! PT 1.02 SC 1.06 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.98 HN 0.90 KP 0.94 ! LA 0.83 MK 1.03 NL 1.02 OV 0.99 ! PT 1.09 SC 0.96 ! ! ! Fit before self-cal, rms=0.070554Jy sigma=0.000779 ! Fit after self-cal, rms=0.067173Jy sigma=0.000769 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.362 mas, bmaj=7.81 mas, bpa=-7.03 degrees ! Estimated noise=456.022 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-20, -8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0027185 Jy ! Component: 100 - total flux cleaned = 0.0042877 Jy ! Component: 150 - total flux cleaned = 0.00540867 Jy ! Component: 200 - total flux cleaned = 0.00620301 Jy ! Total flux subtracted in 200 components = 0.00620301 Jy ! Clean residual min=-0.001645 max=0.001402 Jy/beam ! Clean residual mean=-0.000032 rms=0.000410 Jy/beam ! Combined flux in latest and established models = 0.130672 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 124 components and 0.130672 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067047Jy sigma=0.000767 ! Fit after self-cal, rms=0.066993Jy sigma=0.000767 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066993Jy sigma=0.000767 ! Fit after self-cal, rms=0.066965Jy sigma=0.000766 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.364 mas, bmaj=7.823 mas, bpa=-7.091 degrees ! Estimated noise=455.014 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000892408 Jy ! Component: 100 - total flux cleaned = 0.00134254 Jy ! Component: 150 - total flux cleaned = 0.00149614 Jy ! Component: 200 - total flux cleaned = 0.00163184 Jy ! Total flux subtracted in 200 components = 0.00163184 Jy ! Clean residual min=-0.001446 max=0.001587 Jy/beam ! Clean residual mean=-0.000022 rms=0.000347 Jy/beam ! Combined flux in latest and established models = 0.132304 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 138 components and 0.132304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066949Jy sigma=0.000766 ! Fit after self-cal, rms=0.066959Jy sigma=0.000766 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (71, 119.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000916671 Jy ! Component: 100 - total flux cleaned = 0.000755774 Jy ! Component: 150 - total flux cleaned = 0.000778739 Jy ! Component: 200 - total flux cleaned = 0.000778686 Jy ! Total flux subtracted in 200 components = 0.000778686 Jy ! Clean residual min=-0.001355 max=0.001305 Jy/beam ! Clean residual mean=-0.000021 rms=0.000326 Jy/beam ! Combined flux in latest and established models = 0.133083 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 166 components and 0.133083 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066931Jy sigma=0.000766 ! Fit after self-cal, rms=0.066928Jy sigma=0.000766 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066928Jy sigma=0.000766 ! Fit after self-cal, rms=0.066960Jy sigma=0.000766 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.365 mas, bmaj=7.82 mas, bpa=-7.075 degrees ! Estimated noise=454.997 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000542097 Jy ! Component: 100 - total flux cleaned = 0.000642943 Jy ! Component: 150 - total flux cleaned = 0.000697747 Jy ! Component: 200 - total flux cleaned = 0.000764913 Jy ! Total flux subtracted in 200 components = 0.000764913 Jy ! Clean residual min=-0.001355 max=0.001278 Jy/beam ! Clean residual mean=-0.000020 rms=0.000316 Jy/beam ! Combined flux in latest and established models = 0.133848 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 179 components and 0.133848 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066948Jy sigma=0.000765 ! Fit after self-cal, rms=0.066949Jy sigma=0.000765 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000224795 Jy ! Component: 100 - total flux cleaned = 0.000287886 Jy ! Component: 150 - total flux cleaned = 0.000346657 Jy ! Component: 200 - total flux cleaned = 0.000401422 Jy ! Total flux subtracted in 200 components = 0.000401422 Jy ! Clean residual min=-0.001341 max=0.001277 Jy/beam ! Clean residual mean=-0.000020 rms=0.000312 Jy/beam ! Combined flux in latest and established models = 0.134249 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 185 components and 0.134249 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066943Jy sigma=0.000765 ! Fit after self-cal, rms=0.066942Jy sigma=0.000765 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066942Jy sigma=0.000765 ! Fit after self-cal, rms=0.066969Jy sigma=0.000765 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.934 mas, bmaj=11.77 mas, bpa=-0.572 degrees ! Estimated noise=589.497 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000370318 Jy ! Component: 100 - total flux cleaned = 0.000522455 Jy ! Component: 150 - total flux cleaned = 0.000636537 Jy ! Component: 200 - total flux cleaned = 0.000679504 Jy ! Total flux subtracted in 200 components = 0.000679504 Jy ! Clean residual min=-0.001488 max=0.001597 Jy/beam ! Clean residual mean=-0.000040 rms=0.000424 Jy/beam ! Combined flux in latest and established models = 0.134929 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 192 components and 0.134929 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066965Jy sigma=0.000765 ! Fit after self-cal, rms=0.066965Jy sigma=0.000765 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000122399 Jy ! Component: 100 - total flux cleaned = 0.000199451 Jy ! Component: 150 - total flux cleaned = 0.000245081 Jy ! Component: 200 - total flux cleaned = 0.000265301 Jy ! Total flux subtracted in 200 components = 0.000265301 Jy ! Clean residual min=-0.001460 max=0.001583 Jy/beam ! Clean residual mean=-0.000039 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.135194 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 200 components and 0.135194 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066964Jy sigma=0.000765 ! Fit after self-cal, rms=0.066963Jy sigma=0.000765 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.367 mas, bmaj=7.82 mas, bpa=-7.07 degrees ! Estimated noise=455.047 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.367 x 7.82 at -7.07 degrees (North through East) ! Clean map min=-0.0012652 max=0.091375 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.675 mas, bmaj=6.818 mas, bpa=-7.73 degrees ! Estimated noise=581.802 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0674889 Jy ! Component: 100 - total flux cleaned = 0.086222 Jy ! Component: 150 - total flux cleaned = 0.0969662 Jy ! Component: 200 - total flux cleaned = 0.104086 Jy ! Total flux subtracted in 200 components = 0.104086 Jy ! Clean residual min=-0.002468 max=0.003942 Jy/beam ! Clean residual mean=-0.000030 rms=0.000704 Jy/beam ! Combined flux in latest and established models = 0.104086 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.104086 Jy ! Inverting map and beam ! Estimated beam: bmin=3.367 mas, bmaj=7.82 mas, bpa=-7.07 degrees ! Estimated noise=455.047 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0074239 Jy ! Component: 100 - total flux cleaned = 0.0121094 Jy ! Component: 150 - total flux cleaned = 0.0155472 Jy ! Component: 200 - total flux cleaned = 0.0182248 Jy ! Total flux subtracted in 200 components = 0.0182248 Jy ! Clean residual min=-0.001999 max=0.001645 Jy/beam ! Clean residual mean=-0.000043 rms=0.000462 Jy/beam ! Combined flux in latest and established models = 0.122311 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 72 components and 0.122311 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.934 mas, bmaj=11.77 mas, bpa=-0.572 degrees ! Estimated noise=589.497 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00341805 Jy ! Component: 100 - total flux cleaned = 0.0056566 Jy ! Component: 150 - total flux cleaned = 0.00735616 Jy ! Component: 200 - total flux cleaned = 0.00869611 Jy ! Total flux subtracted in 200 components = 0.00869611 Jy ! Clean residual min=-0.001743 max=0.001453 Jy/beam ! Clean residual mean=-0.000060 rms=0.000485 Jy/beam ! Combined flux in latest and established models = 0.131007 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000990254 Jy ! Component: 100 - total flux cleaned = 0.001457 Jy ! Component: 150 - total flux cleaned = 0.00183114 Jy ! Component: 200 - total flux cleaned = 0.00218752 Jy ! Total flux subtracted in 200 components = 0.00218752 Jy ! Clean residual min=-0.001582 max=0.001463 Jy/beam ! Clean residual mean=-0.000050 rms=0.000440 Jy/beam ! Combined flux in latest and established models = 0.133195 Jy ! Adding 102 model components to the UV plane model. ! The established model now contains 161 components and 0.133195 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.367 mas, bmaj=7.82 mas, bpa=-7.07 degrees ! Estimated noise=455.047 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000334163 Jy ! Component: 100 - total flux cleaned = 0.000597544 Jy ! Component: 150 - total flux cleaned = 0.000776708 Jy ! Component: 200 - total flux cleaned = 0.000835475 Jy ! Total flux subtracted in 200 components = 0.000835475 Jy ! Clean residual min=-0.001314 max=0.001207 Jy/beam ! Clean residual mean=-0.000022 rms=0.000314 Jy/beam ! Combined flux in latest and established models = 0.13403 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 179 components and 0.13403 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066973Jy sigma=0.000765 ! Fit after self-cal, rms=0.066972Jy sigma=0.000765 wmodel J1146+0458_S_2015_03_17_pus_map.mod ! Writing 179 model components to file: J1146+0458_S_2015_03_17_pus_map.mod wobs J1146+0458_S_2015_03_17_pus_uvs.fits ! Writing UV FITS file: J1146+0458_S_2015_03_17_pus_uvs.fits wwins J1146+0458_S_2015_03_17_pus_map.win ! wwins: Wrote 5 windows to J1146+0458_S_2015_03_17_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000465458 Jy ! Component: 100 - total flux cleaned = -0.000754077 Jy ! Component: 150 - total flux cleaned = -0.00096134 Jy ! Component: 200 - total flux cleaned = -0.00109957 Jy ! Component: 250 - total flux cleaned = -0.00117503 Jy ! Component: 300 - total flux cleaned = -0.00123 Jy ! Component: 350 - total flux cleaned = -0.0013366 Jy ! Component: 400 - total flux cleaned = -0.00144034 Jy ! Component: 450 - total flux cleaned = -0.0015416 Jy ! Component: 500 - total flux cleaned = -0.00170558 Jy ! Component: 550 - total flux cleaned = -0.00183369 Jy ! Component: 600 - total flux cleaned = -0.00194316 Jy ! Component: 650 - total flux cleaned = -0.00209545 Jy ! Component: 700 - total flux cleaned = -0.00215499 Jy ! Component: 750 - total flux cleaned = -0.00224291 Jy ! Component: 800 - total flux cleaned = -0.0023434 Jy ! Component: 850 - total flux cleaned = -0.00237168 Jy ! Component: 900 - total flux cleaned = -0.00246912 Jy ! Component: 950 - total flux cleaned = -0.00251003 Jy ! Component: 1000 - total flux cleaned = -0.00256401 Jy ! Component: 1050 - total flux cleaned = -0.00265663 Jy ! Component: 1100 - total flux cleaned = -0.00266946 Jy ! Component: 1150 - total flux cleaned = -0.00272059 Jy ! Component: 1200 - total flux cleaned = -0.00274597 Jy ! Component: 1250 - total flux cleaned = -0.00282058 Jy ! Component: 1300 - total flux cleaned = -0.00283282 Jy ! Component: 1350 - total flux cleaned = -0.00288112 Jy ! Component: 1400 - total flux cleaned = -0.00289268 Jy ! Component: 1450 - total flux cleaned = -0.00288082 Jy ! Component: 1500 - total flux cleaned = -0.00292714 Jy ! Component: 1550 - total flux cleaned = -0.00297292 Jy ! Component: 1600 - total flux cleaned = -0.00299532 Jy ! Component: 1650 - total flux cleaned = -0.00305126 Jy ! Component: 1700 - total flux cleaned = -0.00304011 Jy ! Component: 1750 - total flux cleaned = -0.00310584 Jy ! Component: 1800 - total flux cleaned = -0.00314898 Jy ! Component: 1850 - total flux cleaned = -0.00319162 Jy ! Component: 1900 - total flux cleaned = -0.00322318 Jy ! Component: 1950 - total flux cleaned = -0.00327534 Jy ! Component: 2000 - total flux cleaned = -0.00330622 Jy ! Component: 2050 - total flux cleaned = -0.00333689 Jy ! Component: 2100 - total flux cleaned = -0.0033471 Jy ! Component: 2150 - total flux cleaned = -0.00340703 Jy ! Component: 2200 - total flux cleaned = -0.00341678 Jy ! Component: 2250 - total flux cleaned = -0.00341692 Jy ! Component: 2300 - total flux cleaned = -0.00343614 Jy ! Component: 2350 - total flux cleaned = -0.003503 Jy ! Component: 2400 - total flux cleaned = -0.00350303 Jy ! Component: 2450 - total flux cleaned = -0.00353118 Jy ! Component: 2500 - total flux cleaned = -0.00355896 Jy ! Component: 2550 - total flux cleaned = -0.00356822 Jy ! Component: 2600 - total flux cleaned = -0.00361362 Jy ! Component: 2650 - total flux cleaned = -0.00363149 Jy ! Component: 2700 - total flux cleaned = -0.00364939 Jy ! Component: 2750 - total flux cleaned = -0.00367593 Jy ! Component: 2800 - total flux cleaned = -0.00371106 Jy ! Component: 2850 - total flux cleaned = -0.00375454 Jy ! Component: 2900 - total flux cleaned = -0.00377178 Jy ! Component: 2950 - total flux cleaned = -0.0037975 Jy ! Component: 3000 - total flux cleaned = -0.00383987 Jy ! Component: 3050 - total flux cleaned = -0.00386523 Jy ! Component: 3100 - total flux cleaned = -0.00391539 Jy ! Component: 3150 - total flux cleaned = -0.00394025 Jy ! Component: 3200 - total flux cleaned = -0.0039732 Jy ! Component: 3250 - total flux cleaned = -0.00405461 Jy ! Component: 3300 - total flux cleaned = -0.00407079 Jy ! Component: 3350 - total flux cleaned = -0.00411082 Jy ! Component: 3400 - total flux cleaned = -0.00413469 Jy ! Component: 3450 - total flux cleaned = -0.00418203 Jy ! Component: 3500 - total flux cleaned = -0.00420543 Jy ! Component: 3550 - total flux cleaned = -0.00422876 Jy ! Component: 3600 - total flux cleaned = -0.00427509 Jy ! Component: 3650 - total flux cleaned = -0.00430577 Jy ! Component: 3700 - total flux cleaned = -0.00434381 Jy ! Component: 3750 - total flux cleaned = -0.00436653 Jy ! Component: 3800 - total flux cleaned = -0.00441908 Jy ! Component: 3850 - total flux cleaned = -0.00442665 Jy ! Component: 3900 - total flux cleaned = -0.00447109 Jy ! Component: 3950 - total flux cleaned = -0.00452994 Jy ! Component: 4000 - total flux cleaned = -0.00456643 Jy ! Component: 4050 - total flux cleaned = -0.00458825 Jy ! Total flux subtracted in 4096 components = -0.00462433 Jy ! Clean residual min=-0.000462 max=0.000438 Jy/beam ! Clean residual mean=-0.000005 rms=0.000135 Jy/beam ! Combined flux in latest and established models = 0.129406 Jy keep ! Adding 299 model components to the UV plane model. ! The established model now contains 478 components and 0.129406 Jy ![Exited script file: muppet] wmap "J1146+0458_S_2015_03_17_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.367 x 7.82 at -7.07 degrees (North through East) ! Clean map min=-0.0011852 max=0.091816 Jy/beam ! Writing clean map to FITS file: J1146+0458_S_2015_03_17_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0918163 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000133566 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.436413 0.436413 0.872827 1.74565 3.49131 6.98261 13.9652 27.9305 55.8609 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.091 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.367 x 7.82 at -7.07 degrees (North through East) ! Clean map min=-0.0011852 max=0.091816 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1146+0458_S_2015_03_17_pus_uvs.log closed on Fri Dec 30 22:58:13 2016