! Started logfile: J1111+1955_S_2015_03_17_pus_uvs.log on Fri Dec 30 22:57:15 2016 obs J1111+1955_S_2015_03_17_pus_uva.fits ! Reading UV FITS file: J1111+1955_S_2015_03_17_pus_uva.fits ! AN table 1: 104 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.894231 visibilities/baseline/integration-bin. ! Found source: J1111+1955 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 330 lines of history. ! ! Reading 16740 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1111+1955_S_2015_03_17_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.831538Jy sigma=0.010613 ! Fit after self-cal, rms=0.671541Jy sigma=0.008573 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.636 mas, bmaj=6.668 mas, bpa=-3.319 degrees ! Estimated noise=655.039 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.303197 Jy ! Component: 100 - total flux cleaned = 0.421436 Jy ! Total flux subtracted in 100 components = 0.421436 Jy ! Clean residual min=-0.048454 max=0.223238 Jy/beam ! Clean residual mean=0.000194 rms=0.018047 Jy/beam ! Combined flux in latest and established models = 0.421436 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.421436 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.361073Jy sigma=0.004265 ! Fit after self-cal, rms=0.360901Jy sigma=0.004261 ! Inverting map ! Added new window around map position (14, -7.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.18374 Jy ! Component: 100 - total flux cleaned = 0.267988 Jy ! Total flux subtracted in 100 components = 0.267988 Jy ! Clean residual min=-0.040386 max=0.062789 Jy/beam ! Clean residual mean=0.000159 rms=0.010166 Jy/beam ! Combined flux in latest and established models = 0.689424 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 26 components and 0.689424 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.231609Jy sigma=0.002598 ! Fit after self-cal, rms=0.210083Jy sigma=0.002316 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0791189 Jy ! Component: 100 - total flux cleaned = 0.130975 Jy ! Total flux subtracted in 100 components = 0.130975 Jy ! Clean residual min=-0.023658 max=0.037023 Jy/beam ! Clean residual mean=0.000083 rms=0.005954 Jy/beam ! Combined flux in latest and established models = 0.8204 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 37 components and 0.8204 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160365Jy sigma=0.001719 ! Fit after self-cal, rms=0.158052Jy sigma=0.001687 ! Inverting map ! Added new window around map position (3.5, -0.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0444325 Jy ! Component: 100 - total flux cleaned = 0.0770412 Jy ! Total flux subtracted in 100 components = 0.0770412 Jy ! Clean residual min=-0.018150 max=0.028444 Jy/beam ! Clean residual mean=0.000048 rms=0.004479 Jy/beam ! Combined flux in latest and established models = 0.897441 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 54 components and 0.897441 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135238Jy sigma=0.001439 ! Fit after self-cal, rms=0.134878Jy sigma=0.001433 ! Inverting map ! Added new window around map position (10.5, -7). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0297227 Jy ! Component: 100 - total flux cleaned = 0.0523627 Jy ! Total flux subtracted in 100 components = 0.0523627 Jy ! Clean residual min=-0.014928 max=0.014991 Jy/beam ! Clean residual mean=0.000032 rms=0.003685 Jy/beam ! Combined flux in latest and established models = 0.949803 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 62 components and 0.949804 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122663Jy sigma=0.001313 ! Fit after self-cal, rms=0.122590Jy sigma=0.001313 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.092 mas, bmaj=7.417 mas, bpa=-3.733 degrees ! Estimated noise=442.613 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0258003 Jy ! Component: 100 - total flux cleaned = 0.0450492 Jy ! Component: 150 - total flux cleaned = 0.0599988 Jy ! Component: 200 - total flux cleaned = 0.0717956 Jy ! Total flux subtracted in 200 components = 0.0717956 Jy ! Clean residual min=-0.015007 max=0.014643 Jy/beam ! Clean residual mean=0.000015 rms=0.003835 Jy/beam ! Combined flux in latest and established models = 1.0216 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 95 components and 1.0216 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111642Jy sigma=0.001235 ! Fit after self-cal, rms=0.111568Jy sigma=0.001234 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.85 HN 0.93 KP 1.08 ! LA 0.96 MK 1.03 NL 0.89 OV 0.98 ! PT 1.05 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.88 HN 0.98 KP 1.05 ! LA 0.94 MK 1.06 NL 1.05 OV 1.01 ! PT 1.05 SC 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.90 HN 0.98 KP 0.94 ! LA 0.77 MK 1.11 NL 1.24 OV 0.93 ! PT 1.05 SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 0.99 HN 0.95 KP 0.93 ! LA 0.84 MK 1.10 NL 1.01 OV 1.02 ! PT 1.09 SC 1.01 ! ! ! Fit before self-cal, rms=0.111568Jy sigma=0.001234 ! Fit after self-cal, rms=0.073879Jy sigma=0.000881 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.163 mas, bmaj=7.558 mas, bpa=-3.52 degrees ! Estimated noise=442.442 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000629687 Jy ! Component: 100 - total flux cleaned = 0.000605935 Jy ! Component: 150 - total flux cleaned = 0.00111251 Jy ! Component: 200 - total flux cleaned = 0.00119994 Jy ! Total flux subtracted in 200 components = 0.00119994 Jy ! Clean residual min=-0.005879 max=0.004887 Jy/beam ! Clean residual mean=-0.000014 rms=0.001500 Jy/beam ! Combined flux in latest and established models = 1.0228 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 109 components and 1.0228 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073503Jy sigma=0.000875 ! Fit after self-cal, rms=0.073434Jy sigma=0.000874 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073434Jy sigma=0.000874 ! Fit after self-cal, rms=0.071180Jy sigma=0.000826 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.176 mas, bmaj=7.57 mas, bpa=-3.863 degrees ! Estimated noise=445.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00164378 Jy ! Component: 100 - total flux cleaned = 0.00200918 Jy ! Component: 150 - total flux cleaned = 0.00207267 Jy ! Component: 200 - total flux cleaned = 0.00207054 Jy ! Total flux subtracted in 200 components = 0.00207054 Jy ! Clean residual min=-0.003017 max=0.002655 Jy/beam ! Clean residual mean=0.000002 rms=0.000646 Jy/beam ! Combined flux in latest and established models = 1.02487 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 125 components and 1.02487 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071033Jy sigma=0.000824 ! Fit after self-cal, rms=0.071038Jy sigma=0.000824 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000185164 Jy ! Component: 100 - total flux cleaned = 0.000185043 Jy ! Component: 150 - total flux cleaned = 0.000228887 Jy ! Component: 200 - total flux cleaned = 0.00027325 Jy ! Total flux subtracted in 200 components = 0.00027325 Jy ! Clean residual min=-0.002907 max=0.002443 Jy/beam ! Clean residual mean=0.000002 rms=0.000628 Jy/beam ! Combined flux in latest and established models = 1.02514 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 134 components and 1.02514 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070978Jy sigma=0.000824 ! Fit after self-cal, rms=0.070977Jy sigma=0.000824 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070977Jy sigma=0.000824 ! Fit after self-cal, rms=0.071172Jy sigma=0.000823 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.18 mas, bmaj=7.573 mas, bpa=-3.841 degrees ! Estimated noise=446.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000629884 Jy ! Component: 100 - total flux cleaned = 0.000767883 Jy ! Component: 150 - total flux cleaned = 0.000851538 Jy ! Component: 200 - total flux cleaned = 0.000929161 Jy ! Total flux subtracted in 200 components = 0.000929161 Jy ! Clean residual min=-0.002790 max=0.002370 Jy/beam ! Clean residual mean=0.000001 rms=0.000615 Jy/beam ! Combined flux in latest and established models = 1.02607 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 140 components and 1.02607 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071111Jy sigma=0.000823 ! Fit after self-cal, rms=0.071110Jy sigma=0.000823 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.28704e-05 Jy ! Component: 100 - total flux cleaned = 0.000152091 Jy ! Component: 150 - total flux cleaned = 0.000218655 Jy ! Component: 200 - total flux cleaned = 0.000280355 Jy ! Total flux subtracted in 200 components = 0.000280355 Jy ! Clean residual min=-0.002767 max=0.002270 Jy/beam ! Clean residual mean=0.000001 rms=0.000607 Jy/beam ! Combined flux in latest and established models = 1.02635 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 144 components and 1.02635 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071079Jy sigma=0.000823 ! Fit after self-cal, rms=0.071078Jy sigma=0.000823 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071078Jy sigma=0.000823 ! Fit after self-cal, rms=0.071206Jy sigma=0.000822 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.372 mas, bmaj=10.85 mas, bpa=3.015 degrees ! Estimated noise=573.646 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000244273 Jy ! Component: 100 - total flux cleaned = 0.000501829 Jy ! Component: 150 - total flux cleaned = 0.000604702 Jy ! Component: 200 - total flux cleaned = 0.000709254 Jy ! Total flux subtracted in 200 components = 0.000709254 Jy ! Clean residual min=-0.002989 max=0.002487 Jy/beam ! Clean residual mean=0.000001 rms=0.000737 Jy/beam ! Combined flux in latest and established models = 1.02706 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 155 components and 1.02706 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071207Jy sigma=0.000822 ! Fit after self-cal, rms=0.071207Jy sigma=0.000822 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.55981e-05 Jy ! Component: 100 - total flux cleaned = 1.41607e-05 Jy ! Component: 150 - total flux cleaned = 6.98217e-05 Jy ! Component: 200 - total flux cleaned = 0.000121829 Jy ! Total flux subtracted in 200 components = 0.000121829 Jy ! Clean residual min=-0.002968 max=0.002460 Jy/beam ! Clean residual mean=0.000001 rms=0.000735 Jy/beam ! Combined flux in latest and established models = 1.02718 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 163 components and 1.02718 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071207Jy sigma=0.000822 ! Fit after self-cal, rms=0.071207Jy sigma=0.000822 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.183 mas, bmaj=7.573 mas, bpa=-3.792 degrees ! Estimated noise=446.992 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.183 x 7.573 at -3.792 degrees (North through East) ! Clean map min=-0.0026231 max=0.39551 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.703 mas, bmaj=6.805 mas, bpa=-3.47 degrees ! Estimated noise=670.608 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.34811 Jy ! Component: 100 - total flux cleaned = 0.520984 Jy ! Component: 150 - total flux cleaned = 0.636625 Jy ! Component: 200 - total flux cleaned = 0.719849 Jy ! Total flux subtracted in 200 components = 0.719849 Jy ! Clean residual min=-0.019853 max=0.046890 Jy/beam ! Clean residual mean=0.000054 rms=0.006786 Jy/beam ! Combined flux in latest and established models = 0.719848 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.719848 Jy ! Inverting map and beam ! Estimated beam: bmin=3.183 mas, bmaj=7.573 mas, bpa=-3.792 degrees ! Estimated noise=446.992 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0816408 Jy ! Component: 100 - total flux cleaned = 0.137829 Jy ! Component: 150 - total flux cleaned = 0.178234 Jy ! Component: 200 - total flux cleaned = 0.207826 Jy ! Total flux subtracted in 200 components = 0.207826 Jy ! Clean residual min=-0.007460 max=0.016936 Jy/beam ! Clean residual mean=0.000024 rms=0.002940 Jy/beam ! Combined flux in latest and established models = 0.927675 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 54 components and 0.927674 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0219674 Jy ! Component: 100 - total flux cleaned = 0.038522 Jy ! Component: 150 - total flux cleaned = 0.0511424 Jy ! Component: 200 - total flux cleaned = 0.0608895 Jy ! Total flux subtracted in 200 components = 0.0608895 Jy ! Clean residual min=-0.004276 max=0.005913 Jy/beam ! Clean residual mean=0.000009 rms=0.001221 Jy/beam ! Combined flux in latest and established models = 0.988564 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 87 components and 0.988564 Jy ! Inverting map ! Added new window around map position (-2.5, 0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00766378 Jy ! Component: 100 - total flux cleaned = 0.0137332 Jy ! Component: 150 - total flux cleaned = 0.018603 Jy ! Component: 200 - total flux cleaned = 0.0225682 Jy ! Total flux subtracted in 200 components = 0.0225682 Jy ! Clean residual min=-0.003310 max=0.003358 Jy/beam ! Clean residual mean=0.000004 rms=0.000761 Jy/beam ! Combined flux in latest and established models = 1.01113 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 121 components and 1.01113 Jy ! Inverting map ! Added new window around map position (44.5, -33.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00356162 Jy ! Component: 100 - total flux cleaned = 0.00561399 Jy ! Component: 150 - total flux cleaned = 0.00739514 Jy ! Component: 200 - total flux cleaned = 0.00894355 Jy ! Total flux subtracted in 200 components = 0.00894355 Jy ! Clean residual min=-0.002847 max=0.002382 Jy/beam ! Clean residual mean=0.000001 rms=0.000632 Jy/beam ! Combined flux in latest and established models = 1.02008 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 143 components and 1.02008 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.372 mas, bmaj=10.85 mas, bpa=3.015 degrees ! Estimated noise=573.646 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00256749 Jy ! Component: 100 - total flux cleaned = 0.00424553 Jy ! Component: 150 - total flux cleaned = 0.00504891 Jy ! Component: 200 - total flux cleaned = 0.00559268 Jy ! Total flux subtracted in 200 components = 0.00559268 Jy ! Clean residual min=-0.002638 max=0.002242 Jy/beam ! Clean residual mean=-0.000001 rms=0.000699 Jy/beam ! Combined flux in latest and established models = 1.02567 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000402879 Jy ! Component: 100 - total flux cleaned = 0.00066255 Jy ! Component: 150 - total flux cleaned = 0.000781361 Jy ! Component: 200 - total flux cleaned = 0.000918076 Jy ! Total flux subtracted in 200 components = 0.000918076 Jy ! Clean residual min=-0.002557 max=0.002252 Jy/beam ! Clean residual mean=-0.000001 rms=0.000684 Jy/beam ! Combined flux in latest and established models = 1.02659 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 176 components and 1.02659 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.183 mas, bmaj=7.573 mas, bpa=-3.792 degrees ! Estimated noise=446.992 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000602877 Jy ! Component: 100 - total flux cleaned = -0.000727765 Jy ! Component: 150 - total flux cleaned = -0.000840422 Jy ! Component: 200 - total flux cleaned = -0.00083913 Jy ! Total flux subtracted in 200 components = -0.00083913 Jy ! Clean residual min=-0.002534 max=0.002097 Jy/beam ! Clean residual mean=-0.000000 rms=0.000556 Jy/beam ! Combined flux in latest and established models = 1.02575 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 194 components and 1.02575 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071194Jy sigma=0.000822 ! Fit after self-cal, rms=0.071184Jy sigma=0.000822 wmodel J1111+1955_S_2015_03_17_pus_map.mod ! Writing 194 model components to file: J1111+1955_S_2015_03_17_pus_map.mod wobs J1111+1955_S_2015_03_17_pus_uvs.fits ! Writing UV FITS file: J1111+1955_S_2015_03_17_pus_uvs.fits wwins J1111+1955_S_2015_03_17_pus_map.win ! wwins: Wrote 6 windows to J1111+1955_S_2015_03_17_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00112773 Jy ! Component: 100 - total flux cleaned = -0.00160503 Jy ! Component: 150 - total flux cleaned = -0.00179272 Jy ! Component: 200 - total flux cleaned = -0.00175809 Jy ! Component: 250 - total flux cleaned = -0.00182372 Jy ! Component: 300 - total flux cleaned = -0.00188781 Jy ! Component: 350 - total flux cleaned = -0.00201222 Jy ! Component: 400 - total flux cleaned = -0.00207242 Jy ! Component: 450 - total flux cleaned = -0.00213098 Jy ! Component: 500 - total flux cleaned = -0.00216 Jy ! Component: 550 - total flux cleaned = -0.00224453 Jy ! Component: 600 - total flux cleaned = -0.00224457 Jy ! Component: 650 - total flux cleaned = -0.00235275 Jy ! Component: 700 - total flux cleaned = -0.00245881 Jy ! Component: 750 - total flux cleaned = -0.00251005 Jy ! Component: 800 - total flux cleaned = -0.00256081 Jy ! Component: 850 - total flux cleaned = -0.00273529 Jy ! Component: 900 - total flux cleaned = -0.00275884 Jy ! Component: 950 - total flux cleaned = -0.00278313 Jy ! Component: 1000 - total flux cleaned = -0.00283054 Jy ! Component: 1050 - total flux cleaned = -0.00283089 Jy ! Component: 1100 - total flux cleaned = -0.00283142 Jy ! Component: 1150 - total flux cleaned = -0.002809 Jy ! Component: 1200 - total flux cleaned = -0.00280969 Jy ! Component: 1250 - total flux cleaned = -0.00274303 Jy ! Component: 1300 - total flux cleaned = -0.00276451 Jy ! Component: 1350 - total flux cleaned = -0.00267906 Jy ! Component: 1400 - total flux cleaned = -0.00267905 Jy ! Component: 1450 - total flux cleaned = -0.00255349 Jy ! Component: 1500 - total flux cleaned = -0.00249163 Jy ! Component: 1550 - total flux cleaned = -0.00247141 Jy ! Component: 1600 - total flux cleaned = -0.00237103 Jy ! Component: 1650 - total flux cleaned = -0.00231144 Jy ! Component: 1700 - total flux cleaned = -0.00227228 Jy ! Component: 1750 - total flux cleaned = -0.0022527 Jy ! Component: 1800 - total flux cleaned = -0.00215692 Jy ! Component: 1850 - total flux cleaned = -0.00219483 Jy ! Component: 1900 - total flux cleaned = -0.00219449 Jy ! Component: 1950 - total flux cleaned = -0.00213891 Jy ! Component: 2000 - total flux cleaned = -0.00210209 Jy ! Component: 2050 - total flux cleaned = -0.00213853 Jy ! Component: 2100 - total flux cleaned = -0.00206674 Jy ! Component: 2150 - total flux cleaned = -0.0020669 Jy ! Component: 2200 - total flux cleaned = -0.00210201 Jy ! Component: 2250 - total flux cleaned = -0.00208469 Jy ! Component: 2300 - total flux cleaned = -0.00203293 Jy ! Component: 2350 - total flux cleaned = -0.00208417 Jy ! Component: 2400 - total flux cleaned = -0.00208401 Jy ! Component: 2450 - total flux cleaned = -0.00206707 Jy ! Component: 2500 - total flux cleaned = -0.00206704 Jy ! Component: 2550 - total flux cleaned = -0.00211632 Jy ! Component: 2600 - total flux cleaned = -0.00211635 Jy ! Component: 2650 - total flux cleaned = -0.00219734 Jy ! Component: 2700 - total flux cleaned = -0.00227726 Jy ! Component: 2750 - total flux cleaned = -0.00226132 Jy ! Component: 2800 - total flux cleaned = -0.00237134 Jy ! Component: 2850 - total flux cleaned = -0.00235555 Jy ! Component: 2900 - total flux cleaned = -0.0023709 Jy ! Component: 2950 - total flux cleaned = -0.0024019 Jy ! Component: 3000 - total flux cleaned = -0.00244746 Jy ! Component: 3050 - total flux cleaned = -0.00252274 Jy ! Component: 3100 - total flux cleaned = -0.00256756 Jy ! Component: 3150 - total flux cleaned = -0.00262679 Jy ! Component: 3200 - total flux cleaned = -0.00267087 Jy ! Component: 3250 - total flux cleaned = -0.00269995 Jy ! Component: 3300 - total flux cleaned = -0.002772 Jy ! Component: 3350 - total flux cleaned = -0.00284354 Jy ! Component: 3400 - total flux cleaned = -0.0029002 Jy ! Component: 3450 - total flux cleaned = -0.00294247 Jy ! Component: 3500 - total flux cleaned = -0.00298412 Jy ! Component: 3550 - total flux cleaned = -0.00303954 Jy ! Component: 3600 - total flux cleaned = -0.00313562 Jy ! Component: 3650 - total flux cleaned = -0.00314903 Jy ! Component: 3700 - total flux cleaned = -0.00318941 Jy ! Component: 3750 - total flux cleaned = -0.00322961 Jy ! Component: 3800 - total flux cleaned = -0.00329611 Jy ! Component: 3850 - total flux cleaned = -0.00330951 Jy ! Component: 3900 - total flux cleaned = -0.00329649 Jy ! Component: 3950 - total flux cleaned = -0.00337457 Jy ! Component: 4000 - total flux cleaned = -0.0033746 Jy ! Component: 4050 - total flux cleaned = -0.00342573 Jy ! Total flux subtracted in 4096 components = -0.00340028 Jy ! Clean residual min=-0.000800 max=0.000690 Jy/beam ! Clean residual mean=-0.000001 rms=0.000228 Jy/beam ! Combined flux in latest and established models = 1.02235 Jy keep ! Adding 282 model components to the UV plane model. ! The established model now contains 476 components and 1.02235 Jy ![Exited script file: muppet] wmap "J1111+1955_S_2015_03_17_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.183 x 7.573 at -3.792 degrees (North through East) ! Clean map min=-0.0017179 max=0.39799 Jy/beam ! Writing clean map to FITS file: J1111+1955_S_2015_03_17_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.397989 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000225322 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.169845 0.169845 0.33969 0.67938 1.35876 2.71752 5.43504 10.8701 21.7402 43.4803 86.9607 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.397 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.183 x 7.573 at -3.792 degrees (North through East) ! Clean map min=-0.0017179 max=0.39799 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1111+1955_S_2015_03_17_pus_uvs.log closed on Fri Dec 30 22:57:20 2016