! Started logfile: J1036-3744_S_2015_03_17_pus_uvs.log on Fri Dec 30 22:56:41 2016 obs J1036-3744_S_2015_03_17_pus_uva.fits ! Reading UV FITS file: J1036-3744_S_2015_03_17_pus_uva.fits ! AN table 1: 14 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.430159 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1036-3744 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 330 lines of history. ! ! Reading 1084 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1036-3744_S_2015_03_17_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 46 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 46 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 46 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 46 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.645724Jy sigma=0.003835 ! Fit after self-cal, rms=0.634986Jy sigma=0.003771 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.388 mas, bmaj=15.78 mas, bpa=-4.56 degrees ! Estimated noise=4259.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.290913 Jy ! Component: 100 - total flux cleaned = 0.36054 Jy ! Total flux subtracted in 100 components = 0.36054 Jy ! Clean residual min=-0.033532 max=0.038975 Jy/beam ! Clean residual mean=-0.001195 rms=0.009023 Jy/beam ! Combined flux in latest and established models = 0.36054 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.36054 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165974Jy sigma=0.000933 ! Fit after self-cal, rms=0.165941Jy sigma=0.000933 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.861 mas, bmaj=17.31 mas, bpa=-3.604 degrees ! Estimated noise=3638.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0451132 Jy ! Component: 100 - total flux cleaned = 0.0689945 Jy ! Component: 150 - total flux cleaned = 0.0847872 Jy ! Component: 200 - total flux cleaned = 0.0956001 Jy ! Total flux subtracted in 200 components = 0.0956001 Jy ! Clean residual min=-0.030041 max=0.034966 Jy/beam ! Clean residual mean=-0.001450 rms=0.009285 Jy/beam ! Combined flux in latest and established models = 0.456141 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 57 components and 0.456141 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153350Jy sigma=0.000853 ! Fit after self-cal, rms=0.153192Jy sigma=0.000852 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.79 HN 1.13 KP 1.06 ! LA 0.97 MK 1.00* NL 0.99 OV 1.00* ! PT 1.24 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.87 HN 1.21 KP 1.03 ! LA 0.89 MK 1.00* NL 1.11 OV 1.00* ! PT 1.18 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.82 HN 1.07 KP 0.86 ! LA 0.82 MK 1.00* NL 1.14 OV 1.00* ! PT 1.22 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.93 HN 1.05 KP 0.85 ! LA 0.82 MK 1.00* NL 1.15 OV 1.00* ! PT 1.19 SC 0.95 ! ! ! Fit before self-cal, rms=0.153192Jy sigma=0.000852 ! Fit after self-cal, rms=0.139761Jy sigma=0.000737 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.877 mas, bmaj=17.79 mas, bpa=-3.353 degrees ! Estimated noise=3624.47 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0101703 Jy ! Component: 100 - total flux cleaned = -0.0125519 Jy ! Component: 150 - total flux cleaned = -0.0136817 Jy ! Component: 200 - total flux cleaned = -0.014152 Jy ! Total flux subtracted in 200 components = -0.014152 Jy ! Clean residual min=-0.010088 max=0.010112 Jy/beam ! Clean residual mean=-0.000253 rms=0.003146 Jy/beam ! Combined flux in latest and established models = 0.441989 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 73 components and 0.441989 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138765Jy sigma=0.000733 ! Fit after self-cal, rms=0.139222Jy sigma=0.000732 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139222Jy sigma=0.000732 ! Fit after self-cal, rms=0.140921Jy sigma=0.000730 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.879 mas, bmaj=17.96 mas, bpa=-3.238 degrees ! Estimated noise=3624.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00688521 Jy ! Component: 100 - total flux cleaned = -0.00883426 Jy ! Component: 150 - total flux cleaned = -0.00974011 Jy ! Component: 200 - total flux cleaned = -0.0102331 Jy ! Total flux subtracted in 200 components = -0.0102331 Jy ! Clean residual min=-0.009158 max=0.009548 Jy/beam ! Clean residual mean=-0.000234 rms=0.002811 Jy/beam ! Combined flux in latest and established models = 0.431755 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 80 components and 0.431755 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140447Jy sigma=0.000729 ! Fit after self-cal, rms=0.140525Jy sigma=0.000729 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.00079e-05 Jy ! Component: 100 - total flux cleaned = -0.000126184 Jy ! Component: 150 - total flux cleaned = -0.000128678 Jy ! Component: 200 - total flux cleaned = -7.35862e-05 Jy ! Total flux subtracted in 200 components = -7.35862e-05 Jy ! Clean residual min=-0.009112 max=0.009585 Jy/beam ! Clean residual mean=-0.000234 rms=0.002806 Jy/beam ! Combined flux in latest and established models = 0.431682 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 83 components and 0.431682 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140453Jy sigma=0.000728 ! Fit after self-cal, rms=0.140462Jy sigma=0.000728 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140462Jy sigma=0.000728 ! Fit after self-cal, rms=0.141875Jy sigma=0.000727 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.88 mas, bmaj=18.09 mas, bpa=-3.144 degrees ! Estimated noise=3623.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00511776 Jy ! Component: 100 - total flux cleaned = -0.00670039 Jy ! Component: 150 - total flux cleaned = -0.00740048 Jy ! Component: 200 - total flux cleaned = -0.00760858 Jy ! Total flux subtracted in 200 components = -0.00760858 Jy ! Clean residual min=-0.008511 max=0.009330 Jy/beam ! Clean residual mean=-0.000210 rms=0.002579 Jy/beam ! Combined flux in latest and established models = 0.424073 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 87 components and 0.424073 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141623Jy sigma=0.000726 ! Fit after self-cal, rms=0.141680Jy sigma=0.000726 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.45278e-06 Jy ! Component: 100 - total flux cleaned = -8.80228e-06 Jy ! Component: 150 - total flux cleaned = -9.48872e-06 Jy ! Component: 200 - total flux cleaned = -9.46146e-06 Jy ! Total flux subtracted in 200 components = -9.46146e-06 Jy ! Clean residual min=-0.008475 max=0.009296 Jy/beam ! Clean residual mean=-0.000209 rms=0.002576 Jy/beam ! Combined flux in latest and established models = 0.424064 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 89 components and 0.424064 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141636Jy sigma=0.000726 ! Fit after self-cal, rms=0.141642Jy sigma=0.000726 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141642Jy sigma=0.000726 ! Fit after self-cal, rms=0.142802Jy sigma=0.000726 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.328 mas, bmaj=21.87 mas, bpa=-9.162 degrees ! Estimated noise=4346.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00297218 Jy ! Component: 100 - total flux cleaned = -0.00289228 Jy ! Component: 150 - total flux cleaned = -0.00273124 Jy ! Component: 200 - total flux cleaned = -0.00258162 Jy ! Total flux subtracted in 200 components = -0.00258162 Jy ! Clean residual min=-0.008650 max=0.007624 Jy/beam ! Clean residual mean=-0.000270 rms=0.002772 Jy/beam ! Combined flux in latest and established models = 0.421482 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 91 components and 0.421482 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142662Jy sigma=0.000726 ! Fit after self-cal, rms=0.142718Jy sigma=0.000726 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000146568 Jy ! Component: 100 - total flux cleaned = 0.00028282 Jy ! Component: 150 - total flux cleaned = 0.000406712 Jy ! Component: 200 - total flux cleaned = 0.000523798 Jy ! Total flux subtracted in 200 components = 0.000523798 Jy ! Clean residual min=-0.008510 max=0.007702 Jy/beam ! Clean residual mean=-0.000254 rms=0.002742 Jy/beam ! Combined flux in latest and established models = 0.422006 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 91 components and 0.422006 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142703Jy sigma=0.000726 ! Fit after self-cal, rms=0.142707Jy sigma=0.000726 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.88 mas, bmaj=18.19 mas, bpa=-3.068 degrees ! Estimated noise=3619.63 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.88 x 18.19 at -3.068 degrees (North through East) ! Clean map min=-0.0081316 max=0.38478 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.354 mas, bmaj=16.23 mas, bpa=-4.013 degrees ! Estimated noise=4302.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.293574 Jy ! Component: 100 - total flux cleaned = 0.358029 Jy ! Component: 150 - total flux cleaned = 0.379068 Jy ! Component: 200 - total flux cleaned = 0.389985 Jy ! Total flux subtracted in 200 components = 0.389985 Jy ! Clean residual min=-0.012279 max=0.014761 Jy/beam ! Clean residual mean=-0.000299 rms=0.003742 Jy/beam ! Combined flux in latest and established models = 0.389984 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.389984 Jy ! Inverting map and beam ! Estimated beam: bmin=3.88 mas, bmaj=18.19 mas, bpa=-3.068 degrees ! Estimated noise=3619.63 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-12.5, 29). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0155064 Jy ! Component: 100 - total flux cleaned = 0.0236692 Jy ! Component: 150 - total flux cleaned = 0.0288625 Jy ! Component: 200 - total flux cleaned = 0.031716 Jy ! Total flux subtracted in 200 components = 0.031716 Jy ! Clean residual min=-0.008215 max=0.008562 Jy/beam ! Clean residual mean=-0.000246 rms=0.002451 Jy/beam ! Combined flux in latest and established models = 0.421701 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 66 components and 0.421701 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.328 mas, bmaj=21.87 mas, bpa=-9.162 degrees ! Estimated noise=4346.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00239107 Jy ! Component: 100 - total flux cleaned = 0.00309595 Jy ! Component: 150 - total flux cleaned = 0.0035823 Jy ! Component: 200 - total flux cleaned = 0.00401388 Jy ! Total flux subtracted in 200 components = 0.00401388 Jy ! Clean residual min=-0.008584 max=0.007701 Jy/beam ! Clean residual mean=-0.000309 rms=0.002827 Jy/beam ! Combined flux in latest and established models = 0.425714 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000296576 Jy ! Component: 100 - total flux cleaned = 0.0002994 Jy ! Component: 150 - total flux cleaned = 0.000299125 Jy ! Component: 200 - total flux cleaned = 0.000296015 Jy ! Total flux subtracted in 200 components = 0.000296015 Jy ! Clean residual min=-0.008146 max=0.007407 Jy/beam ! Clean residual mean=-0.000264 rms=0.002705 Jy/beam ! Combined flux in latest and established models = 0.42601 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 112 components and 0.426011 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.88 mas, bmaj=18.19 mas, bpa=-3.068 degrees ! Estimated noise=3619.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000540659 Jy ! Component: 100 - total flux cleaned = -0.00110068 Jy ! Component: 150 - total flux cleaned = -0.00110205 Jy ! Component: 200 - total flux cleaned = -0.00102523 Jy ! Total flux subtracted in 200 components = -0.00102523 Jy ! Clean residual min=-0.007466 max=0.008388 Jy/beam ! Clean residual mean=-0.000158 rms=0.002256 Jy/beam ! Combined flux in latest and established models = 0.424985 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 137 components and 0.424985 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141796Jy sigma=0.000723 ! Fit after self-cal, rms=0.141843Jy sigma=0.000723 wmodel J1036-3744_S_2015_03_17_pus_map.mod ! Writing 137 model components to file: J1036-3744_S_2015_03_17_pus_map.mod wobs J1036-3744_S_2015_03_17_pus_uvs.fits ! Writing UV FITS file: J1036-3744_S_2015_03_17_pus_uvs.fits wwins J1036-3744_S_2015_03_17_pus_map.win ! wwins: Wrote 2 windows to J1036-3744_S_2015_03_17_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00108732 Jy ! Component: 100 - total flux cleaned = 0.0017073 Jy ! Component: 150 - total flux cleaned = 0.00215911 Jy ! Component: 200 - total flux cleaned = 0.0023744 Jy ! Component: 250 - total flux cleaned = 0.00217796 Jy ! Component: 300 - total flux cleaned = 0.00217894 Jy ! Component: 350 - total flux cleaned = 0.00226997 Jy ! Component: 400 - total flux cleaned = 0.00226937 Jy ! Component: 450 - total flux cleaned = 0.00243964 Jy ! Component: 500 - total flux cleaned = 0.00260329 Jy ! Component: 550 - total flux cleaned = 0.00283884 Jy ! Component: 600 - total flux cleaned = 0.00307089 Jy ! Component: 650 - total flux cleaned = 0.00352201 Jy ! Component: 700 - total flux cleaned = 0.0038145 Jy ! Component: 750 - total flux cleaned = 0.0040298 Jy ! Component: 800 - total flux cleaned = 0.00431133 Jy ! Component: 850 - total flux cleaned = 0.00465658 Jy ! Component: 900 - total flux cleaned = 0.00485966 Jy ! Component: 950 - total flux cleaned = 0.00505989 Jy ! Component: 1000 - total flux cleaned = 0.00519153 Jy ! Component: 1050 - total flux cleaned = 0.00538599 Jy ! Component: 1100 - total flux cleaned = 0.00557725 Jy ! Component: 1150 - total flux cleaned = 0.00582871 Jy ! Component: 1200 - total flux cleaned = 0.00595239 Jy ! Component: 1250 - total flux cleaned = 0.00595333 Jy ! Component: 1300 - total flux cleaned = 0.00607416 Jy ! Component: 1350 - total flux cleaned = 0.00613342 Jy ! Component: 1400 - total flux cleaned = 0.00619236 Jy ! Component: 1450 - total flux cleaned = 0.00619257 Jy ! Component: 1500 - total flux cleaned = 0.00630755 Jy ! Component: 1550 - total flux cleaned = 0.0063077 Jy ! Component: 1600 - total flux cleaned = 0.0063637 Jy ! Component: 1650 - total flux cleaned = 0.00641964 Jy ! Component: 1700 - total flux cleaned = 0.00658579 Jy ! Component: 1750 - total flux cleaned = 0.00675066 Jy ! Component: 1800 - total flux cleaned = 0.00675053 Jy ! Component: 1850 - total flux cleaned = 0.00696748 Jy ! Component: 1900 - total flux cleaned = 0.00712923 Jy ! Component: 1950 - total flux cleaned = 0.00734396 Jy ! Component: 2000 - total flux cleaned = 0.00750411 Jy ! Component: 2050 - total flux cleaned = 0.00750428 Jy ! Component: 2100 - total flux cleaned = 0.00771616 Jy ! Component: 2150 - total flux cleaned = 0.00782174 Jy ! Component: 2200 - total flux cleaned = 0.0079793 Jy ! Component: 2250 - total flux cleaned = 0.00813598 Jy ! Component: 2300 - total flux cleaned = 0.00824007 Jy ! Component: 2350 - total flux cleaned = 0.00829216 Jy ! Component: 2400 - total flux cleaned = 0.0083959 Jy ! Component: 2450 - total flux cleaned = 0.00844754 Jy ! Component: 2500 - total flux cleaned = 0.00860322 Jy ! Component: 2550 - total flux cleaned = 0.0086547 Jy ! Component: 2600 - total flux cleaned = 0.00875801 Jy ! Component: 2650 - total flux cleaned = 0.00891284 Jy ! Component: 2700 - total flux cleaned = 0.00901602 Jy ! Component: 2750 - total flux cleaned = 0.00911897 Jy ! Component: 2800 - total flux cleaned = 0.00932621 Jy ! Component: 2850 - total flux cleaned = 0.00948148 Jy ! Component: 2900 - total flux cleaned = 0.00953351 Jy ! Component: 2950 - total flux cleaned = 0.00968929 Jy ! Component: 3000 - total flux cleaned = 0.00984535 Jy ! Component: 3050 - total flux cleaned = 0.0100021 Jy ! Component: 3100 - total flux cleaned = 0.0100022 Jy ! Component: 3150 - total flux cleaned = 0.010107 Jy ! Component: 3200 - total flux cleaned = 0.010212 Jy ! Component: 3250 - total flux cleaned = 0.0103701 Jy ! Component: 3300 - total flux cleaned = 0.010423 Jy ! Component: 3350 - total flux cleaned = 0.0104754 Jy ! Component: 3400 - total flux cleaned = 0.0105287 Jy ! Component: 3450 - total flux cleaned = 0.0106357 Jy ! Component: 3500 - total flux cleaned = 0.0107438 Jy ! Component: 3550 - total flux cleaned = 0.010852 Jy ! Component: 3600 - total flux cleaned = 0.0109064 Jy ! Component: 3650 - total flux cleaned = 0.0109608 Jy ! Component: 3700 - total flux cleaned = 0.0110157 Jy ! Component: 3750 - total flux cleaned = 0.0110712 Jy ! Component: 3800 - total flux cleaned = 0.011127 Jy ! Component: 3850 - total flux cleaned = 0.0111833 Jy ! Component: 3900 - total flux cleaned = 0.0111269 Jy ! Component: 3950 - total flux cleaned = 0.0112976 Jy ! Component: 4000 - total flux cleaned = 0.0112976 Jy ! Component: 4050 - total flux cleaned = 0.0113553 Jy ! Total flux subtracted in 4096 components = 0.0114133 Jy ! Clean residual min=-0.004154 max=0.003966 Jy/beam ! Clean residual mean=-0.000028 rms=0.001100 Jy/beam ! Combined flux in latest and established models = 0.436399 Jy keep ! Adding 288 model components to the UV plane model. ! The established model now contains 425 components and 0.436399 Jy ![Exited script file: muppet] wmap "J1036-3744_S_2015_03_17_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.88 x 18.19 at -3.068 degrees (North through East) ! Clean map min=-0.007977 max=0.38023 Jy/beam ! Writing clean map to FITS file: J1036-3744_S_2015_03_17_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.380227 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00120748 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.952703 0.952703 1.90541 3.81081 7.62162 15.2432 30.4865 60.973 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0036 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.38 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.88 x 18.19 at -3.068 degrees (North through East) ! Clean map min=-0.007977 max=0.38023 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1036-3744_S_2015_03_17_pus_uvs.log closed on Fri Dec 30 22:56:46 2016