! Started logfile: J1033+4116_S_2015_03_17_pus_uvs.log on Fri Dec 30 22:56:36 2016 obs J1033+4116_S_2015_03_17_pus_uva.fits ! Reading UV FITS file: J1033+4116_S_2015_03_17_pus_uva.fits ! AN table 1: 29 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.591571 visibilities/baseline/integration-bin. ! Found source: J1033+4116 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 330 lines of history. ! ! Reading 3088 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1033+4116_S_2015_03_17_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.365760Jy sigma=0.004577 ! Fit after self-cal, rms=0.353144Jy sigma=0.004433 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.187 mas, bmaj=10.35 mas, bpa=38.27 degrees ! Estimated noise=1306.67 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.498427 Jy ! Component: 100 - total flux cleaned = 0.613451 Jy ! Total flux subtracted in 100 components = 0.613451 Jy ! Clean residual min=-0.034040 max=0.043677 Jy/beam ! Clean residual mean=-0.000086 rms=0.007666 Jy/beam ! Combined flux in latest and established models = 0.613451 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.613451 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153204Jy sigma=0.001596 ! Fit after self-cal, rms=0.153197Jy sigma=0.001596 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.174 mas, bmaj=10.91 mas, bpa=37.63 degrees ! Estimated noise=1075.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0661631 Jy ! Component: 100 - total flux cleaned = 0.10319 Jy ! Component: 150 - total flux cleaned = 0.126185 Jy ! Component: 200 - total flux cleaned = 0.141425 Jy ! Total flux subtracted in 200 components = 0.141425 Jy ! Clean residual min=-0.022680 max=0.018463 Jy/beam ! Clean residual mean=0.000039 rms=0.005122 Jy/beam ! Combined flux in latest and established models = 0.754876 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 58 components and 0.754876 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113042Jy sigma=0.001231 ! Fit after self-cal, rms=0.112873Jy sigma=0.001229 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.88 HN 1.00* KP 1.12 ! LA 1.00 MK 1.05 NL 0.89 OV 1.04 ! PT 1.07 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.90 HN 1.00* KP 1.07 ! LA 0.98 MK 1.10 NL 1.00 OV 1.07 ! PT 1.06 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.91 HN 1.00* KP 0.96 ! LA 0.79 MK 1.11 NL 1.16 OV 0.99 ! PT 1.04 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.93 HN 1.00* KP 0.92 ! LA 0.84 MK 1.13 NL 0.97 OV 1.01 ! PT 1.07 SC 0.95 ! ! ! Fit before self-cal, rms=0.112873Jy sigma=0.001229 ! Fit after self-cal, rms=0.070218Jy sigma=0.000821 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.237 mas, bmaj=10.96 mas, bpa=37.94 degrees ! Estimated noise=1071.65 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00201024 Jy ! Component: 100 - total flux cleaned = -0.00246564 Jy ! Component: 150 - total flux cleaned = -0.00262777 Jy ! Component: 200 - total flux cleaned = -0.00290425 Jy ! Total flux subtracted in 200 components = -0.00290425 Jy ! Clean residual min=-0.008184 max=0.010590 Jy/beam ! Clean residual mean=-0.000021 rms=0.002052 Jy/beam ! Combined flux in latest and established models = 0.751972 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 74 components and 0.751972 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068923Jy sigma=0.000804 ! Fit after self-cal, rms=0.068831Jy sigma=0.000803 ! Inverting map ! Added new window around map position (-6, 16). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0103185 Jy ! Component: 100 - total flux cleaned = 0.0132499 Jy ! Component: 150 - total flux cleaned = 0.0136027 Jy ! Component: 200 - total flux cleaned = 0.0139142 Jy ! Total flux subtracted in 200 components = 0.0139142 Jy ! Clean residual min=-0.006270 max=0.006668 Jy/beam ! Clean residual mean=-0.000015 rms=0.001560 Jy/beam ! Combined flux in latest and established models = 0.765886 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 109 components and 0.765886 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067103Jy sigma=0.000782 ! Fit after self-cal, rms=0.066887Jy sigma=0.000779 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066887Jy sigma=0.000779 ! Fit after self-cal, rms=0.066245Jy sigma=0.000770 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.232 mas, bmaj=10.98 mas, bpa=37.93 degrees ! Estimated noise=1072.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000355405 Jy ! Component: 100 - total flux cleaned = 9.61503e-05 Jy ! Component: 150 - total flux cleaned = 0.000596159 Jy ! Component: 200 - total flux cleaned = 0.00103088 Jy ! Total flux subtracted in 200 components = 0.00103088 Jy ! Clean residual min=-0.005041 max=0.004461 Jy/beam ! Clean residual mean=-0.000004 rms=0.001161 Jy/beam ! Combined flux in latest and established models = 0.766917 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 134 components and 0.766917 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065703Jy sigma=0.000764 ! Fit after self-cal, rms=0.065680Jy sigma=0.000763 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00129888 Jy ! Component: 100 - total flux cleaned = 0.00167389 Jy ! Component: 150 - total flux cleaned = 0.00193124 Jy ! Component: 200 - total flux cleaned = 0.00216752 Jy ! Total flux subtracted in 200 components = 0.00216752 Jy ! Clean residual min=-0.004744 max=0.004353 Jy/beam ! Clean residual mean=-0.000003 rms=0.001076 Jy/beam ! Combined flux in latest and established models = 0.769085 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 156 components and 0.769085 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065466Jy sigma=0.000761 ! Fit after self-cal, rms=0.065452Jy sigma=0.000761 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065452Jy sigma=0.000761 ! Fit after self-cal, rms=0.065423Jy sigma=0.000760 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.23 mas, bmaj=10.99 mas, bpa=37.94 degrees ! Estimated noise=1072.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00028719 Jy ! Component: 100 - total flux cleaned = -0.000122471 Jy ! Component: 150 - total flux cleaned = -5.08247e-05 Jy ! Component: 200 - total flux cleaned = 1.00087e-05 Jy ! Total flux subtracted in 200 components = 1.00087e-05 Jy ! Clean residual min=-0.004510 max=0.004068 Jy/beam ! Clean residual mean=-0.000006 rms=0.000994 Jy/beam ! Combined flux in latest and established models = 0.769095 Jy selfcal ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 186 components and 0.769095 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065257Jy sigma=0.000758 ! Fit after self-cal, rms=0.065248Jy sigma=0.000758 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000585494 Jy ! Component: 100 - total flux cleaned = 0.000468698 Jy ! Component: 150 - total flux cleaned = 0.00052311 Jy ! Component: 200 - total flux cleaned = 0.000574407 Jy ! Total flux subtracted in 200 components = 0.000574407 Jy ! Clean residual min=-0.004347 max=0.003939 Jy/beam ! Clean residual mean=-0.000006 rms=0.000958 Jy/beam ! Combined flux in latest and established models = 0.769669 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 201 components and 0.769669 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065165Jy sigma=0.000757 ! Fit after self-cal, rms=0.065160Jy sigma=0.000757 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065160Jy sigma=0.000757 ! Fit after self-cal, rms=0.065158Jy sigma=0.000756 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.835 mas, bmaj=11.82 mas, bpa=39.68 degrees ! Estimated noise=1210.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000245434 Jy ! Component: 100 - total flux cleaned = 0.000350769 Jy ! Component: 150 - total flux cleaned = 0.000397153 Jy ! Component: 200 - total flux cleaned = 0.000361209 Jy ! Total flux subtracted in 200 components = 0.000361209 Jy ! Clean residual min=-0.004154 max=0.003935 Jy/beam ! Clean residual mean=-0.000014 rms=0.001004 Jy/beam ! Combined flux in latest and established models = 0.77003 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 228 components and 0.77003 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065111Jy sigma=0.000756 ! Fit after self-cal, rms=0.065108Jy sigma=0.000756 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000206616 Jy ! Component: 100 - total flux cleaned = 0.000270956 Jy ! Component: 150 - total flux cleaned = 0.000270996 Jy ! Component: 200 - total flux cleaned = 0.000216358 Jy ! Total flux subtracted in 200 components = 0.000216358 Jy ! Clean residual min=-0.004024 max=0.003898 Jy/beam ! Clean residual mean=-0.000014 rms=0.000986 Jy/beam ! Combined flux in latest and established models = 0.770247 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 242 components and 0.770247 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065087Jy sigma=0.000755 ! Fit after self-cal, rms=0.065086Jy sigma=0.000755 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.231 mas, bmaj=10.99 mas, bpa=37.95 degrees ! Estimated noise=1072.26 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.231 x 10.99 at 37.95 degrees (North through East) ! Clean map min=-0.011215 max=0.6395 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065086Jy sigma=0.000755 ! Fit after self-cal, rms=0.059649Jy sigma=0.000690 ! Inverting map and beam ! Estimated beam: bmin=4.232 mas, bmaj=11 mas, bpa=37.97 degrees ! Estimated noise=1071.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000659781 Jy ! Component: 100 - total flux cleaned = -0.000795372 Jy ! Component: 150 - total flux cleaned = -0.000834971 Jy ! Component: 200 - total flux cleaned = -0.000835988 Jy ! Total flux subtracted in 200 components = -0.000835988 Jy ! Clean residual min=-0.003734 max=0.003646 Jy/beam ! Clean residual mean=-0.000011 rms=0.000865 Jy/beam ! Combined flux in latest and established models = 0.769411 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 262 components and 0.769411 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059588Jy sigma=0.000689 ! Fit after self-cal, rms=0.059585Jy sigma=0.000689 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000124867 Jy ! Component: 100 - total flux cleaned = 9.06843e-05 Jy ! Component: 150 - total flux cleaned = 5.94445e-05 Jy ! Component: 200 - total flux cleaned = 5.99344e-05 Jy ! Total flux subtracted in 200 components = 5.99344e-05 Jy ! Clean residual min=-0.003659 max=0.003546 Jy/beam ! Clean residual mean=-0.000011 rms=0.000853 Jy/beam ! Combined flux in latest and established models = 0.769471 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 270 components and 0.76947 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059554Jy sigma=0.000689 ! Fit after self-cal, rms=0.059552Jy sigma=0.000689 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059552Jy sigma=0.000689 ! Fit after self-cal, rms=0.059559Jy sigma=0.000689 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.216 mas, bmaj=10.43 mas, bpa=38.58 degrees ! Estimated noise=1306.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.49808 Jy ! Component: 100 - total flux cleaned = 0.610931 Jy ! Component: 150 - total flux cleaned = 0.653339 Jy ! Component: 200 - total flux cleaned = 0.679629 Jy ! Total flux subtracted in 200 components = 0.679629 Jy ! Clean residual min=-0.010011 max=0.014418 Jy/beam ! Clean residual mean=-0.000055 rms=0.002863 Jy/beam ! Combined flux in latest and established models = 0.679629 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 36 model components to the UV plane model. ! The established model now contains 36 components and 0.679629 Jy ! Inverting map and beam ! Estimated beam: bmin=4.234 mas, bmaj=11 mas, bpa=37.98 degrees ! Estimated noise=1071.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0264819 Jy ! Component: 100 - total flux cleaned = 0.0436788 Jy ! Component: 150 - total flux cleaned = 0.0558014 Jy ! Component: 200 - total flux cleaned = 0.0646498 Jy ! Total flux subtracted in 200 components = 0.0646498 Jy ! Clean residual min=-0.006070 max=0.005476 Jy/beam ! Clean residual mean=-0.000034 rms=0.001503 Jy/beam ! Combined flux in latest and established models = 0.744279 Jy ! Adding 75 model components to the UV plane model. ! The established model now contains 103 components and 0.744279 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.845 mas, bmaj=11.83 mas, bpa=39.76 degrees ! Estimated noise=1208.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00860593 Jy ! Component: 100 - total flux cleaned = 0.0128154 Jy ! Component: 150 - total flux cleaned = 0.015315 Jy ! Component: 200 - total flux cleaned = 0.0171868 Jy ! Total flux subtracted in 200 components = 0.0171868 Jy ! Clean residual min=-0.004694 max=0.004262 Jy/beam ! Clean residual mean=-0.000025 rms=0.001168 Jy/beam ! Combined flux in latest and established models = 0.761466 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00154257 Jy ! Component: 100 - total flux cleaned = 0.00245521 Jy ! Component: 150 - total flux cleaned = 0.00308498 Jy ! Component: 200 - total flux cleaned = 0.00365091 Jy ! Total flux subtracted in 200 components = 0.00365091 Jy ! Clean residual min=-0.004136 max=0.004171 Jy/beam ! Clean residual mean=-0.000021 rms=0.001036 Jy/beam ! Combined flux in latest and established models = 0.765117 Jy ! Adding 108 model components to the UV plane model. ! The established model now contains 207 components and 0.765117 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.234 mas, bmaj=11 mas, bpa=37.98 degrees ! Estimated noise=1071.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00134487 Jy ! Component: 100 - total flux cleaned = 0.00176316 Jy ! Component: 150 - total flux cleaned = 0.00195091 Jy ! Component: 200 - total flux cleaned = 0.00220766 Jy ! Total flux subtracted in 200 components = 0.00220766 Jy ! Clean residual min=-0.004150 max=0.004399 Jy/beam ! Clean residual mean=-0.000012 rms=0.000976 Jy/beam ! Combined flux in latest and established models = 0.767325 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 227 components and 0.767325 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060017Jy sigma=0.000694 ! Fit after self-cal, rms=0.059979Jy sigma=0.000694 wmodel J1033+4116_S_2015_03_17_pus_map.mod ! Writing 227 model components to file: J1033+4116_S_2015_03_17_pus_map.mod wobs J1033+4116_S_2015_03_17_pus_uvs.fits ! Writing UV FITS file: J1033+4116_S_2015_03_17_pus_uvs.fits wwins J1033+4116_S_2015_03_17_pus_map.win ! wwins: Wrote 2 windows to J1033+4116_S_2015_03_17_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000375171 Jy ! Component: 100 - total flux cleaned = -0.000891023 Jy ! Component: 150 - total flux cleaned = -0.00130269 Jy ! Component: 200 - total flux cleaned = -0.00185697 Jy ! Component: 250 - total flux cleaned = -0.00253684 Jy ! Component: 300 - total flux cleaned = -0.00313747 Jy ! Component: 350 - total flux cleaned = -0.00347402 Jy ! Component: 400 - total flux cleaned = -0.0038929 Jy ! Component: 450 - total flux cleaned = -0.00416262 Jy ! Component: 500 - total flux cleaned = -0.00416236 Jy ! Component: 550 - total flux cleaned = -0.00420514 Jy ! Component: 600 - total flux cleaned = -0.00428706 Jy ! Component: 650 - total flux cleaned = -0.00432631 Jy ! Component: 700 - total flux cleaned = -0.00424882 Jy ! Component: 750 - total flux cleaned = -0.00436503 Jy ! Component: 800 - total flux cleaned = -0.0044024 Jy ! Component: 850 - total flux cleaned = -0.00447586 Jy ! Component: 900 - total flux cleaned = -0.00451047 Jy ! Component: 950 - total flux cleaned = -0.00444033 Jy ! Component: 1000 - total flux cleaned = -0.00450937 Jy ! Component: 1050 - total flux cleaned = -0.00457643 Jy ! Component: 1100 - total flux cleaned = -0.00464201 Jy ! Component: 1150 - total flux cleaned = -0.00467407 Jy ! Component: 1200 - total flux cleaned = -0.00467453 Jy ! Component: 1250 - total flux cleaned = -0.00470683 Jy ! Component: 1300 - total flux cleaned = -0.00473775 Jy ! Component: 1350 - total flux cleaned = -0.00473859 Jy ! Component: 1400 - total flux cleaned = -0.00476846 Jy ! Component: 1450 - total flux cleaned = -0.00491467 Jy ! Component: 1500 - total flux cleaned = -0.00482746 Jy ! Component: 1550 - total flux cleaned = -0.00482733 Jy ! Component: 1600 - total flux cleaned = -0.00479942 Jy ! Component: 1650 - total flux cleaned = -0.00482684 Jy ! Component: 1700 - total flux cleaned = -0.00482675 Jy ! Component: 1750 - total flux cleaned = -0.00485359 Jy ! Component: 1800 - total flux cleaned = -0.00482694 Jy ! Component: 1850 - total flux cleaned = -0.00487968 Jy ! Component: 1900 - total flux cleaned = -0.00490553 Jy ! Component: 1950 - total flux cleaned = -0.00495597 Jy ! Component: 2000 - total flux cleaned = -0.00493125 Jy ! Component: 2050 - total flux cleaned = -0.00495534 Jy ! Component: 2100 - total flux cleaned = -0.00497994 Jy ! Component: 2150 - total flux cleaned = -0.00502779 Jy ! Component: 2200 - total flux cleaned = -0.00509833 Jy ! Component: 2250 - total flux cleaned = -0.00509842 Jy ! Component: 2300 - total flux cleaned = -0.00518969 Jy ! Component: 2350 - total flux cleaned = -0.00521216 Jy ! Component: 2400 - total flux cleaned = -0.00518985 Jy ! Component: 2450 - total flux cleaned = -0.00523401 Jy ! Component: 2500 - total flux cleaned = -0.0052341 Jy ! Component: 2550 - total flux cleaned = -0.00516904 Jy ! Component: 2600 - total flux cleaned = -0.00523282 Jy ! Component: 2650 - total flux cleaned = -0.00521125 Jy ! Component: 2700 - total flux cleaned = -0.00523189 Jy ! Component: 2750 - total flux cleaned = -0.00519088 Jy ! Component: 2800 - total flux cleaned = -0.00529258 Jy ! Component: 2850 - total flux cleaned = -0.00523203 Jy ! Component: 2900 - total flux cleaned = -0.00529139 Jy ! Component: 2950 - total flux cleaned = -0.00523232 Jy ! Component: 3000 - total flux cleaned = -0.0053296 Jy ! Component: 3050 - total flux cleaned = -0.00542586 Jy ! Component: 3100 - total flux cleaned = -0.00540692 Jy ! Component: 3150 - total flux cleaned = -0.00546337 Jy ! Component: 3200 - total flux cleaned = -0.00546326 Jy ! Component: 3250 - total flux cleaned = -0.005445 Jy ! Component: 3300 - total flux cleaned = -0.00551783 Jy ! Component: 3350 - total flux cleaned = -0.00553577 Jy ! Component: 3400 - total flux cleaned = -0.00555357 Jy ! Component: 3450 - total flux cleaned = -0.00558911 Jy ! Component: 3500 - total flux cleaned = -0.00564163 Jy ! Component: 3550 - total flux cleaned = -0.00565869 Jy ! Component: 3600 - total flux cleaned = -0.0057107 Jy ! Component: 3650 - total flux cleaned = -0.00577912 Jy ! Component: 3700 - total flux cleaned = -0.00588085 Jy ! Component: 3750 - total flux cleaned = -0.00591432 Jy ! Component: 3800 - total flux cleaned = -0.0059977 Jy ! Component: 3850 - total flux cleaned = -0.00606373 Jy ! Component: 3900 - total flux cleaned = -0.00616226 Jy ! Component: 3950 - total flux cleaned = -0.00622733 Jy ! Component: 4000 - total flux cleaned = -0.00629188 Jy ! Component: 4050 - total flux cleaned = -0.00637222 Jy ! Total flux subtracted in 4096 components = -0.00645162 Jy ! Clean residual min=-0.000866 max=0.000936 Jy/beam ! Clean residual mean=-0.000006 rms=0.000313 Jy/beam ! Combined flux in latest and established models = 0.760873 Jy keep ! Adding 297 model components to the UV plane model. ! The established model now contains 524 components and 0.760873 Jy ![Exited script file: muppet] wmap "J1033+4116_S_2015_03_17_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.234 x 11 at 37.98 degrees (North through East) ! Clean map min=-0.0054467 max=0.6438 Jy/beam ! Writing clean map to FITS file: J1033+4116_S_2015_03_17_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.643795 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0003085 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.143757 0.143757 0.287514 0.575027 1.15005 2.30011 4.60022 9.20043 18.4009 36.8017 73.6035 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.643 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.234 x 11 at 37.98 degrees (North through East) ! Clean map min=-0.0054467 max=0.6438 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1033+4116_S_2015_03_17_pus_uvs.log closed on Fri Dec 30 22:56:41 2016