! Started logfile: J1012+2312_S_2015_03_17_pus_uvs.log on Fri Dec 30 22:56:05 2016 obs J1012+2312_S_2015_03_17_pus_uva.fits ! Reading UV FITS file: J1012+2312_S_2015_03_17_pus_uva.fits ! AN table 1: 85 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.59634 visibilities/baseline/integration-bin. ! Found source: J1012+2312 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 330 lines of history. ! ! Reading 9124 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1012+2312_S_2015_03_17_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 209 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 209 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 209 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 209 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.866328Jy sigma=0.010249 ! Fit after self-cal, rms=0.820880Jy sigma=0.009719 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.509 mas, bmaj=8.009 mas, bpa=21.8 degrees ! Estimated noise=877.424 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.134246 Jy ! Component: 100 - total flux cleaned = 0.164862 Jy ! Total flux subtracted in 100 components = 0.164862 Jy ! Clean residual min=-0.007869 max=0.011051 Jy/beam ! Clean residual mean=-0.000033 rms=0.001932 Jy/beam ! Combined flux in latest and established models = 0.164862 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.164862 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079339Jy sigma=0.000845 ! Fit after self-cal, rms=0.079336Jy sigma=0.000845 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.478 mas, bmaj=9.301 mas, bpa=20.52 degrees ! Estimated noise=639.763 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0166584 Jy ! Component: 100 - total flux cleaned = 0.0248721 Jy ! Component: 150 - total flux cleaned = 0.0295771 Jy ! Component: 200 - total flux cleaned = 0.032502 Jy ! Total flux subtracted in 200 components = 0.032502 Jy ! Clean residual min=-0.006248 max=0.005210 Jy/beam ! Clean residual mean=-0.000027 rms=0.001524 Jy/beam ! Combined flux in latest and established models = 0.197363 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 61 components and 0.197363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075041Jy sigma=0.000813 ! Fit after self-cal, rms=0.075023Jy sigma=0.000813 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.85 HN 0.96 KP 1.13 ! LA 0.97 MK 1.20 NL 0.88 OV 1.02 ! PT 1.09 SC 0.99 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.88 HN 1.01 KP 1.08 ! LA 0.95 MK 1.18 NL 1.00 OV 1.05 ! PT 1.06 SC 1.04 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.91 HN 0.97 KP 0.97 ! LA 0.79 MK 1.24 NL 1.13 OV 0.96 ! PT 1.05 SC 1.04 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.89 HN 0.96 KP 0.94 ! LA 0.86 MK 1.29 NL 1.01 OV 1.02 ! PT 1.07 SC 0.97 ! ! ! Fit before self-cal, rms=0.075023Jy sigma=0.000813 ! Fit after self-cal, rms=0.069219Jy sigma=0.000769 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.574 mas, bmaj=9.389 mas, bpa=20.92 degrees ! Estimated noise=643.204 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000762777 Jy ! Component: 100 - total flux cleaned = -0.00102719 Jy ! Component: 150 - total flux cleaned = -0.00119822 Jy ! Component: 200 - total flux cleaned = -0.00137282 Jy ! Total flux subtracted in 200 components = -0.00137282 Jy ! Clean residual min=-0.002367 max=0.002788 Jy/beam ! Clean residual mean=0.000007 rms=0.000645 Jy/beam ! Combined flux in latest and established models = 0.195991 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 70 components and 0.195991 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069154Jy sigma=0.000768 ! Fit after self-cal, rms=0.069119Jy sigma=0.000768 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069119Jy sigma=0.000768 ! Fit after self-cal, rms=0.068604Jy sigma=0.000764 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.591 mas, bmaj=9.42 mas, bpa=20.86 degrees ! Estimated noise=642.785 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00111998 Jy ! Component: 100 - total flux cleaned = -0.00123028 Jy ! Component: 150 - total flux cleaned = -0.00125246 Jy ! Component: 200 - total flux cleaned = -0.0012529 Jy ! Total flux subtracted in 200 components = -0.0012529 Jy ! Clean residual min=-0.002076 max=0.002026 Jy/beam ! Clean residual mean=-0.000001 rms=0.000488 Jy/beam ! Combined flux in latest and established models = 0.194738 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 79 components and 0.194738 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068583Jy sigma=0.000764 ! Fit after self-cal, rms=0.068580Jy sigma=0.000764 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.9986e-05 Jy ! Component: 100 - total flux cleaned = -2.01067e-05 Jy ! Component: 150 - total flux cleaned = -2.04519e-05 Jy ! Component: 200 - total flux cleaned = -2.049e-05 Jy ! Total flux subtracted in 200 components = -2.049e-05 Jy ! Clean residual min=-0.002044 max=0.002040 Jy/beam ! Clean residual mean=-0.000001 rms=0.000485 Jy/beam ! Combined flux in latest and established models = 0.194717 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 83 components and 0.194717 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068571Jy sigma=0.000763 ! Fit after self-cal, rms=0.068571Jy sigma=0.000763 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068571Jy sigma=0.000763 ! Fit after self-cal, rms=0.068591Jy sigma=0.000763 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.602 mas, bmaj=9.433 mas, bpa=20.89 degrees ! Estimated noise=642.354 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000778253 Jy ! Component: 100 - total flux cleaned = -0.000895694 Jy ! Component: 150 - total flux cleaned = -0.000979279 Jy ! Component: 200 - total flux cleaned = -0.00101002 Jy ! Total flux subtracted in 200 components = -0.00101002 Jy ! Clean residual min=-0.001996 max=0.001930 Jy/beam ! Clean residual mean=-0.000001 rms=0.000475 Jy/beam ! Combined flux in latest and established models = 0.193707 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 85 components and 0.193707 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068580Jy sigma=0.000763 ! Fit after self-cal, rms=0.068580Jy sigma=0.000763 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.81402e-05 Jy ! Component: 100 - total flux cleaned = -3.25663e-05 Jy ! Component: 150 - total flux cleaned = -4.69665e-05 Jy ! Component: 200 - total flux cleaned = -4.72691e-05 Jy ! Total flux subtracted in 200 components = -4.72691e-05 Jy ! Clean residual min=-0.001986 max=0.001930 Jy/beam ! Clean residual mean=-0.000001 rms=0.000473 Jy/beam ! Combined flux in latest and established models = 0.19366 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 87 components and 0.19366 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068575Jy sigma=0.000763 ! Fit after self-cal, rms=0.068574Jy sigma=0.000763 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068574Jy sigma=0.000763 ! Fit after self-cal, rms=0.068589Jy sigma=0.000763 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.433 mas, bmaj=12 mas, bpa=11.76 degrees ! Estimated noise=721.496 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000390075 Jy ! Component: 100 - total flux cleaned = -0.00040869 Jy ! Component: 150 - total flux cleaned = -0.000408592 Jy ! Component: 200 - total flux cleaned = -0.000408612 Jy ! Total flux subtracted in 200 components = -0.000408612 Jy ! Clean residual min=-0.002041 max=0.001696 Jy/beam ! Clean residual mean=-0.000001 rms=0.000496 Jy/beam ! Combined flux in latest and established models = 0.193251 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 98 components and 0.193251 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068587Jy sigma=0.000763 ! Fit after self-cal, rms=0.068587Jy sigma=0.000763 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.78459e-05 Jy ! Component: 100 - total flux cleaned = -2.86556e-05 Jy ! Component: 150 - total flux cleaned = -2.25443e-05 Jy ! Component: 200 - total flux cleaned = -2.2457e-05 Jy ! Total flux subtracted in 200 components = -2.2457e-05 Jy ! Clean residual min=-0.002036 max=0.001680 Jy/beam ! Clean residual mean=-0.000001 rms=0.000494 Jy/beam ! Combined flux in latest and established models = 0.193229 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 101 components and 0.193229 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068586Jy sigma=0.000763 ! Fit after self-cal, rms=0.068586Jy sigma=0.000763 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.61 mas, bmaj=9.443 mas, bpa=20.91 degrees ! Estimated noise=641.968 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.61 x 9.443 at 20.91 degrees (North through East) ! Clean map min=-0.0019033 max=0.17788 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.592 mas, bmaj=8.1 mas, bpa=22.19 degrees ! Estimated noise=891.519 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.136306 Jy ! Component: 100 - total flux cleaned = 0.166714 Jy ! Component: 150 - total flux cleaned = 0.176891 Jy ! Component: 200 - total flux cleaned = 0.182604 Jy ! Total flux subtracted in 200 components = 0.182604 Jy ! Clean residual min=-0.003458 max=0.003532 Jy/beam ! Clean residual mean=-0.000007 rms=0.000821 Jy/beam ! Combined flux in latest and established models = 0.182604 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.182604 Jy ! Inverting map and beam ! Estimated beam: bmin=4.61 mas, bmaj=9.443 mas, bpa=20.91 degrees ! Estimated noise=641.968 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00489949 Jy ! Component: 100 - total flux cleaned = 0.00744419 Jy ! Component: 150 - total flux cleaned = 0.00890656 Jy ! Component: 200 - total flux cleaned = 0.00975575 Jy ! Total flux subtracted in 200 components = 0.00975575 Jy ! Clean residual min=-0.002020 max=0.001885 Jy/beam ! Clean residual mean=-0.000001 rms=0.000473 Jy/beam ! Combined flux in latest and established models = 0.192359 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 55 components and 0.192359 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.433 mas, bmaj=12 mas, bpa=11.76 degrees ! Estimated noise=721.496 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000709035 Jy ! Component: 100 - total flux cleaned = 0.00089396 Jy ! Component: 150 - total flux cleaned = 0.000913799 Jy ! Component: 200 - total flux cleaned = 0.000923399 Jy ! Total flux subtracted in 200 components = 0.000923399 Jy ! Clean residual min=-0.002049 max=0.001721 Jy/beam ! Clean residual mean=-0.000001 rms=0.000495 Jy/beam ! Combined flux in latest and established models = 0.193283 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.75241e-05 Jy ! Component: 100 - total flux cleaned = 2.60841e-05 Jy ! Component: 150 - total flux cleaned = 3.45621e-05 Jy ! Component: 200 - total flux cleaned = 4.23531e-05 Jy ! Total flux subtracted in 200 components = 4.23531e-05 Jy ! Clean residual min=-0.002043 max=0.001703 Jy/beam ! Clean residual mean=-0.000001 rms=0.000493 Jy/beam ! Combined flux in latest and established models = 0.193325 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 64 components and 0.193325 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.61 mas, bmaj=9.443 mas, bpa=20.91 degrees ! Estimated noise=641.968 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.66647e-05 Jy ! Component: 100 - total flux cleaned = -7.68609e-05 Jy ! Component: 150 - total flux cleaned = -0.000101882 Jy ! Component: 200 - total flux cleaned = -0.000124436 Jy ! Total flux subtracted in 200 components = -0.000124436 Jy ! Clean residual min=-0.001939 max=0.001885 Jy/beam ! Clean residual mean=-0.000000 rms=0.000464 Jy/beam ! Combined flux in latest and established models = 0.193201 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 74 components and 0.193201 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068581Jy sigma=0.000763 ! Fit after self-cal, rms=0.068578Jy sigma=0.000763 wmodel J1012+2312_S_2015_03_17_pus_map.mod ! Writing 74 model components to file: J1012+2312_S_2015_03_17_pus_map.mod wobs J1012+2312_S_2015_03_17_pus_uvs.fits ! Writing UV FITS file: J1012+2312_S_2015_03_17_pus_uvs.fits wwins J1012+2312_S_2015_03_17_pus_map.win ! wwins: Wrote 1 windows to J1012+2312_S_2015_03_17_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000457188 Jy ! Component: 100 - total flux cleaned = -0.000777564 Jy ! Component: 150 - total flux cleaned = -0.000689669 Jy ! Component: 200 - total flux cleaned = -0.00052304 Jy ! Component: 250 - total flux cleaned = -0.00033794 Jy ! Component: 300 - total flux cleaned = -0.000133592 Jy ! Component: 350 - total flux cleaned = -9.63386e-06 Jy ! Component: 400 - total flux cleaned = -5.75724e-05 Jy ! Component: 450 - total flux cleaned = -0.000127774 Jy ! Component: 500 - total flux cleaned = -0.000127642 Jy ! Component: 550 - total flux cleaned = -0.000173002 Jy ! Component: 600 - total flux cleaned = -0.000238825 Jy ! Component: 650 - total flux cleaned = -0.000174701 Jy ! Component: 700 - total flux cleaned = -0.000133104 Jy ! Component: 750 - total flux cleaned = -0.000133426 Jy ! Component: 800 - total flux cleaned = -7.27101e-05 Jy ! Component: 850 - total flux cleaned = 7.02383e-06 Jy ! Component: 900 - total flux cleaned = 6.64581e-05 Jy ! Component: 950 - total flux cleaned = 8.57244e-05 Jy ! Component: 1000 - total flux cleaned = 0.000162303 Jy ! Component: 1050 - total flux cleaned = 0.00025665 Jy ! Component: 1100 - total flux cleaned = 0.000331 Jy ! Component: 1150 - total flux cleaned = 0.000331042 Jy ! Component: 1200 - total flux cleaned = 0.000421978 Jy ! Component: 1250 - total flux cleaned = 0.000493767 Jy ! Component: 1300 - total flux cleaned = 0.000529251 Jy ! Component: 1350 - total flux cleaned = 0.000634088 Jy ! Component: 1400 - total flux cleaned = 0.000686044 Jy ! Component: 1450 - total flux cleaned = 0.00075429 Jy ! Component: 1500 - total flux cleaned = 0.000805046 Jy ! Component: 1550 - total flux cleaned = 0.00083822 Jy ! Component: 1600 - total flux cleaned = 0.000854631 Jy ! Component: 1650 - total flux cleaned = 0.000903453 Jy ! Component: 1700 - total flux cleaned = 0.000983725 Jy ! Component: 1750 - total flux cleaned = 0.00101559 Jy ! Component: 1800 - total flux cleaned = 0.00107832 Jy ! Component: 1850 - total flux cleaned = 0.00112508 Jy ! Component: 1900 - total flux cleaned = 0.00115596 Jy ! Component: 1950 - total flux cleaned = 0.00118652 Jy ! Component: 2000 - total flux cleaned = 0.00129168 Jy ! Component: 2050 - total flux cleaned = 0.00126171 Jy ! Component: 2100 - total flux cleaned = 0.00132082 Jy ! Component: 2150 - total flux cleaned = 0.00133561 Jy ! Component: 2200 - total flux cleaned = 0.00140767 Jy ! Component: 2250 - total flux cleaned = 0.00142199 Jy ! Component: 2300 - total flux cleaned = 0.00149277 Jy ! Component: 2350 - total flux cleaned = 0.00152092 Jy ! Component: 2400 - total flux cleaned = 0.00156277 Jy ! Component: 2450 - total flux cleaned = 0.00165922 Jy ! Component: 2500 - total flux cleaned = 0.00168641 Jy ! Component: 2550 - total flux cleaned = 0.00175399 Jy ! Component: 2600 - total flux cleaned = 0.00182126 Jy ! Component: 2650 - total flux cleaned = 0.00194092 Jy ! Component: 2700 - total flux cleaned = 0.00198042 Jy ! Component: 2750 - total flux cleaned = 0.00203277 Jy ! Component: 2800 - total flux cleaned = 0.00204575 Jy ! Component: 2850 - total flux cleaned = 0.00213616 Jy ! Component: 2900 - total flux cleaned = 0.00217465 Jy ! Component: 2950 - total flux cleaned = 0.00220001 Jy ! Component: 3000 - total flux cleaned = 0.00231323 Jy ! Component: 3050 - total flux cleaned = 0.00225071 Jy ! Component: 3100 - total flux cleaned = 0.00233753 Jy ! Component: 3150 - total flux cleaned = 0.00232537 Jy ! Component: 3200 - total flux cleaned = 0.0023498 Jy ! Component: 3250 - total flux cleaned = 0.00243478 Jy ! Component: 3300 - total flux cleaned = 0.0024828 Jy ! Component: 3350 - total flux cleaned = 0.00251853 Jy ! Component: 3400 - total flux cleaned = 0.00251849 Jy ! Component: 3450 - total flux cleaned = 0.00255383 Jy ! Component: 3500 - total flux cleaned = 0.0025537 Jy ! Component: 3550 - total flux cleaned = 0.00260015 Jy ! Component: 3600 - total flux cleaned = 0.00256563 Jy ! Component: 3650 - total flux cleaned = 0.00263434 Jy ! Component: 3700 - total flux cleaned = 0.00263416 Jy ! Component: 3750 - total flux cleaned = 0.00264543 Jy ! Component: 3800 - total flux cleaned = 0.00271285 Jy ! Component: 3850 - total flux cleaned = 0.00273499 Jy ! Component: 3900 - total flux cleaned = 0.00271285 Jy ! Component: 3950 - total flux cleaned = 0.00275693 Jy ! Component: 4000 - total flux cleaned = 0.00278962 Jy ! Component: 4050 - total flux cleaned = 0.00280055 Jy ! Total flux subtracted in 4096 components = 0.00281127 Jy ! Clean residual min=-0.000646 max=0.000567 Jy/beam ! Clean residual mean=-0.000001 rms=0.000204 Jy/beam ! Combined flux in latest and established models = 0.196012 Jy keep ! Adding 252 model components to the UV plane model. ! The established model now contains 326 components and 0.196012 Jy ![Exited script file: muppet] wmap "J1012+2312_S_2015_03_17_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.61 x 9.443 at 20.91 degrees (North through East) ! Clean map min=-0.0013945 max=0.17797 Jy/beam ! Writing clean map to FITS file: J1012+2312_S_2015_03_17_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.177973 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000203759 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.343467 0.343467 0.686933 1.37387 2.74773 5.49547 10.9909 21.9819 43.9637 87.9275 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.177 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.61 x 9.443 at 20.91 degrees (North through East) ! Clean map min=-0.0013945 max=0.17797 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1012+2312_S_2015_03_17_pus_uvs.log closed on Fri Dec 30 22:56:09 2016