! Started logfile: J1008-1629_S_2015_03_17_pus_uvs.log on Fri Dec 30 22:55:59 2016 obs J1008-1629_S_2015_03_17_pus_uva.fits ! Reading UV FITS file: J1008-1629_S_2015_03_17_pus_uva.fits ! AN table 1: 123 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.968925 visibilities/baseline/integration-bin. ! Found source: J1008-1629 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 330 lines of history. ! ! Reading 21452 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1008-1629_S_2015_03_17_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.970787Jy sigma=0.009537 ! Fit after self-cal, rms=0.941045Jy sigma=0.009256 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.421 mas, bmaj=6.246 mas, bpa=-3.622 degrees ! Estimated noise=760.358 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0441488 Jy ! Component: 100 - total flux cleaned = 0.0552299 Jy ! Total flux subtracted in 100 components = 0.0552299 Jy ! Clean residual min=-0.004710 max=0.009093 Jy/beam ! Clean residual mean=-0.000004 rms=0.001150 Jy/beam ! Combined flux in latest and established models = 0.0552298 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0552298 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092342Jy sigma=0.000810 ! Fit after self-cal, rms=0.092101Jy sigma=0.000807 ! Inverting map ! Added new window around map position (28, 6.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00837182 Jy ! Component: 100 - total flux cleaned = 0.0134475 Jy ! Total flux subtracted in 100 components = 0.0134475 Jy ! Clean residual min=-0.004328 max=0.006510 Jy/beam ! Clean residual mean=-0.000002 rms=0.000998 Jy/beam ! Combined flux in latest and established models = 0.0686773 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 30 components and 0.0686773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090876Jy sigma=0.000797 ! Fit after self-cal, rms=0.090718Jy sigma=0.000796 ! Inverting map ! Added new window around map position (8, -1.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00700786 Jy ! Component: 100 - total flux cleaned = 0.0116118 Jy ! Total flux subtracted in 100 components = 0.0116118 Jy ! Clean residual min=-0.003660 max=0.004433 Jy/beam ! Clean residual mean=-0.000001 rms=0.000891 Jy/beam ! Combined flux in latest and established models = 0.0802891 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 44 components and 0.0802891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089830Jy sigma=0.000788 ! Fit after self-cal, rms=0.089704Jy sigma=0.000788 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.902 mas, bmaj=7.466 mas, bpa=-3.821 degrees ! Estimated noise=502.722 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00709804 Jy ! Component: 100 - total flux cleaned = 0.0123613 Jy ! Component: 150 - total flux cleaned = 0.0165257 Jy ! Component: 200 - total flux cleaned = 0.0198636 Jy ! Total flux subtracted in 200 components = 0.0198636 Jy ! Clean residual min=-0.002930 max=0.003829 Jy/beam ! Clean residual mean=0.000000 rms=0.000757 Jy/beam ! Combined flux in latest and established models = 0.100153 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 78 components and 0.100153 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088731Jy sigma=0.000780 ! Fit after self-cal, rms=0.088531Jy sigma=0.000779 ! Inverting map ! Added new window around map position (24, 6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00443662 Jy ! Component: 100 - total flux cleaned = 0.0076272 Jy ! Component: 150 - total flux cleaned = 0.0101649 Jy ! Component: 200 - total flux cleaned = 0.012258 Jy ! Total flux subtracted in 200 components = 0.012258 Jy ! Clean residual min=-0.002493 max=0.002432 Jy/beam ! Clean residual mean=0.000003 rms=0.000620 Jy/beam ! Combined flux in latest and established models = 0.112411 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 109 components and 0.112411 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088145Jy sigma=0.000776 ! Fit after self-cal, rms=0.088060Jy sigma=0.000776 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.75 HN 1.05 KP 1.06 ! LA 0.99 MK 0.98 NL 0.91 OV 0.99 ! PT 1.06 SC 1.07 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.83 HN 1.04 KP 1.05 ! LA 0.93 MK 0.99 NL 1.05 OV 1.04 ! PT 1.06 SC 1.06 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.85 HN 1.11 KP 0.97 ! LA 0.80 MK 1.10 NL 1.12 OV 0.94 ! PT 1.05 SC 1.04 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.97 HN 0.98 KP 0.93 ! LA 0.85 MK 1.10 NL 1.00 OV 1.10 ! PT 1.05 SC 0.92 ! ! ! Fit before self-cal, rms=0.088060Jy sigma=0.000776 ! Fit after self-cal, rms=0.083692Jy sigma=0.000772 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.955 mas, bmaj=7.565 mas, bpa=-3.519 degrees ! Estimated noise=498.934 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00188488 Jy ! Component: 100 - total flux cleaned = 0.00317409 Jy ! Component: 150 - total flux cleaned = 0.00384323 Jy ! Component: 200 - total flux cleaned = 0.00419765 Jy ! Total flux subtracted in 200 components = 0.00419765 Jy ! Clean residual min=-0.001775 max=0.001721 Jy/beam ! Clean residual mean=0.000001 rms=0.000447 Jy/beam ! Combined flux in latest and established models = 0.116608 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 128 components and 0.116608 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083637Jy sigma=0.000772 ! Fit after self-cal, rms=0.083509Jy sigma=0.000771 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083509Jy sigma=0.000771 ! Fit after self-cal, rms=0.083114Jy sigma=0.000770 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.958 mas, bmaj=7.567 mas, bpa=-3.573 degrees ! Estimated noise=499.768 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101705 Jy ! Component: 100 - total flux cleaned = 0.00152085 Jy ! Component: 150 - total flux cleaned = 0.00176688 Jy ! Component: 200 - total flux cleaned = 0.00187733 Jy ! Total flux subtracted in 200 components = 0.00187733 Jy ! Clean residual min=-0.001648 max=0.001765 Jy/beam ! Clean residual mean=-0.000001 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.118486 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 151 components and 0.118486 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083096Jy sigma=0.000770 ! Fit after self-cal, rms=0.083095Jy sigma=0.000770 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (66, -12.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000961538 Jy ! Component: 100 - total flux cleaned = 0.000883784 Jy ! Component: 150 - total flux cleaned = 0.00103216 Jy ! Component: 200 - total flux cleaned = 0.00100699 Jy ! Total flux subtracted in 200 components = 0.00100699 Jy ! Clean residual min=-0.001545 max=0.001553 Jy/beam ! Clean residual mean=-0.000001 rms=0.000377 Jy/beam ! Combined flux in latest and established models = 0.119493 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 169 components and 0.119493 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083059Jy sigma=0.000770 ! Fit after self-cal, rms=0.083050Jy sigma=0.000770 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083050Jy sigma=0.000770 ! Fit after self-cal, rms=0.083122Jy sigma=0.000769 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.957 mas, bmaj=7.563 mas, bpa=-3.581 degrees ! Estimated noise=499.807 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000661481 Jy ! Component: 100 - total flux cleaned = 0.000893405 Jy ! Component: 150 - total flux cleaned = 0.000938729 Jy ! Component: 200 - total flux cleaned = 0.000939013 Jy ! Total flux subtracted in 200 components = 0.000939013 Jy ! Clean residual min=-0.001580 max=0.001607 Jy/beam ! Clean residual mean=-0.000002 rms=0.000368 Jy/beam ! Combined flux in latest and established models = 0.120432 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 174 components and 0.120432 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083106Jy sigma=0.000769 ! Fit after self-cal, rms=0.083109Jy sigma=0.000769 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-43.5, 92). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00144084 Jy ! Component: 100 - total flux cleaned = 0.00159802 Jy ! Component: 150 - total flux cleaned = 0.00169708 Jy ! Component: 200 - total flux cleaned = 0.00171917 Jy ! Total flux subtracted in 200 components = 0.00171917 Jy ! Clean residual min=-0.001499 max=0.001389 Jy/beam ! Clean residual mean=-0.000001 rms=0.000351 Jy/beam ! Combined flux in latest and established models = 0.122151 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 192 components and 0.122151 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083080Jy sigma=0.000769 ! Fit after self-cal, rms=0.083075Jy sigma=0.000769 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083075Jy sigma=0.000769 ! Fit after self-cal, rms=0.083072Jy sigma=0.000769 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.278 mas, bmaj=14.95 mas, bpa=2.222 degrees ! Estimated noise=669.327 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000578209 Jy ! Component: 100 - total flux cleaned = 0.000823195 Jy ! Component: 150 - total flux cleaned = 0.000903782 Jy ! Component: 200 - total flux cleaned = 0.000957523 Jy ! Total flux subtracted in 200 components = 0.000957523 Jy ! Clean residual min=-0.001618 max=0.001569 Jy/beam ! Clean residual mean=-0.000004 rms=0.000431 Jy/beam ! Combined flux in latest and established models = 0.123108 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 209 components and 0.123108 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083068Jy sigma=0.000769 ! Fit after self-cal, rms=0.083068Jy sigma=0.000769 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.87448e-05 Jy ! Component: 100 - total flux cleaned = 0.000212236 Jy ! Component: 150 - total flux cleaned = 0.000277392 Jy ! Component: 200 - total flux cleaned = 0.000277172 Jy ! Total flux subtracted in 200 components = 0.000277172 Jy ! Clean residual min=-0.001603 max=0.001540 Jy/beam ! Clean residual mean=-0.000003 rms=0.000426 Jy/beam ! Combined flux in latest and established models = 0.123386 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 217 components and 0.123386 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083068Jy sigma=0.000769 ! Fit after self-cal, rms=0.083068Jy sigma=0.000769 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.953 mas, bmaj=7.557 mas, bpa=-3.619 degrees ! Estimated noise=499.392 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.953 x 7.557 at -3.619 degrees (North through East) ! Clean map min=-0.0014588 max=0.058229 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.452 mas, bmaj=6.285 mas, bpa=-3.497 degrees ! Estimated noise=761.056 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0435192 Jy ! Component: 100 - total flux cleaned = 0.058501 Jy ! Component: 150 - total flux cleaned = 0.0682585 Jy ! Component: 200 - total flux cleaned = 0.0757211 Jy ! Total flux subtracted in 200 components = 0.0757211 Jy ! Clean residual min=-0.003952 max=0.004416 Jy/beam ! Clean residual mean=-0.000005 rms=0.000964 Jy/beam ! Combined flux in latest and established models = 0.0757211 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.0757211 Jy ! Inverting map and beam ! Estimated beam: bmin=2.953 mas, bmaj=7.557 mas, bpa=-3.619 degrees ! Estimated noise=499.392 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00900393 Jy ! Component: 100 - total flux cleaned = 0.0157637 Jy ! Component: 150 - total flux cleaned = 0.0210665 Jy ! Component: 200 - total flux cleaned = 0.025322 Jy ! Total flux subtracted in 200 components = 0.025322 Jy ! Clean residual min=-0.002366 max=0.003203 Jy/beam ! Clean residual mean=-0.000007 rms=0.000673 Jy/beam ! Combined flux in latest and established models = 0.101043 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 75 components and 0.101043 Jy ! Inverting map ! Added new window around map position (4.5, -3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0036672 Jy ! Component: 100 - total flux cleaned = 0.00666195 Jy ! Component: 150 - total flux cleaned = 0.00921704 Jy ! Component: 200 - total flux cleaned = 0.0114236 Jy ! Total flux subtracted in 200 components = 0.0114236 Jy ! Clean residual min=-0.001971 max=0.001868 Jy/beam ! Clean residual mean=-0.000005 rms=0.000467 Jy/beam ! Combined flux in latest and established models = 0.112467 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 119 components and 0.112467 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.278 mas, bmaj=14.95 mas, bpa=2.222 degrees ! Estimated noise=669.327 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00329223 Jy ! Component: 100 - total flux cleaned = 0.00538605 Jy ! Component: 150 - total flux cleaned = 0.00693583 Jy ! Component: 200 - total flux cleaned = 0.00790948 Jy ! Total flux subtracted in 200 components = 0.00790948 Jy ! Clean residual min=-0.001806 max=0.001460 Jy/beam ! Clean residual mean=-0.000006 rms=0.000462 Jy/beam ! Combined flux in latest and established models = 0.120376 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00064494 Jy ! Component: 100 - total flux cleaned = 0.00109479 Jy ! Component: 150 - total flux cleaned = 0.00139643 Jy ! Component: 200 - total flux cleaned = 0.00163655 Jy ! Total flux subtracted in 200 components = 0.00163655 Jy ! Clean residual min=-0.001595 max=0.001375 Jy/beam ! Clean residual mean=-0.000005 rms=0.000422 Jy/beam ! Combined flux in latest and established models = 0.122013 Jy ! Adding 98 model components to the UV plane model. ! The established model now contains 209 components and 0.122013 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.953 mas, bmaj=7.557 mas, bpa=-3.619 degrees ! Estimated noise=499.392 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000699747 Jy ! Component: 100 - total flux cleaned = 0.000930913 Jy ! Component: 150 - total flux cleaned = 0.00096723 Jy ! Component: 200 - total flux cleaned = 0.000902232 Jy ! Total flux subtracted in 200 components = 0.000902232 Jy ! Clean residual min=-0.001543 max=0.001375 Jy/beam ! Clean residual mean=-0.000002 rms=0.000344 Jy/beam ! Combined flux in latest and established models = 0.122915 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 235 components and 0.122915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083081Jy sigma=0.000769 ! Fit after self-cal, rms=0.083070Jy sigma=0.000769 wmodel J1008-1629_S_2015_03_17_pus_map.mod ! Writing 235 model components to file: J1008-1629_S_2015_03_17_pus_map.mod wobs J1008-1629_S_2015_03_17_pus_uvs.fits ! Writing UV FITS file: J1008-1629_S_2015_03_17_pus_uvs.fits wwins J1008-1629_S_2015_03_17_pus_map.win ! wwins: Wrote 7 windows to J1008-1629_S_2015_03_17_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000552482 Jy ! Component: 100 - total flux cleaned = -0.000925747 Jy ! Component: 150 - total flux cleaned = -0.00118057 Jy ! Component: 200 - total flux cleaned = -0.0014224 Jy ! Component: 250 - total flux cleaned = -0.00152841 Jy ! Component: 300 - total flux cleaned = -0.00158984 Jy ! Component: 350 - total flux cleaned = -0.00166853 Jy ! Component: 400 - total flux cleaned = -0.00174531 Jy ! Component: 450 - total flux cleaned = -0.00172644 Jy ! Component: 500 - total flux cleaned = -0.00174472 Jy ! Component: 550 - total flux cleaned = -0.00172631 Jy ! Component: 600 - total flux cleaned = -0.00174407 Jy ! Component: 650 - total flux cleaned = -0.00179578 Jy ! Component: 700 - total flux cleaned = -0.00179567 Jy ! Component: 750 - total flux cleaned = -0.00184606 Jy ! Component: 800 - total flux cleaned = -0.0019289 Jy ! Component: 850 - total flux cleaned = -0.00199378 Jy ! Component: 900 - total flux cleaned = -0.00205789 Jy ! Component: 950 - total flux cleaned = -0.00210519 Jy ! Component: 1000 - total flux cleaned = -0.00210535 Jy ! Component: 1050 - total flux cleaned = -0.00216694 Jy ! Component: 1100 - total flux cleaned = -0.0022275 Jy ! Component: 1150 - total flux cleaned = -0.00221235 Jy ! Component: 1200 - total flux cleaned = -0.00222713 Jy ! Component: 1250 - total flux cleaned = -0.00228553 Jy ! Component: 1300 - total flux cleaned = -0.0023288 Jy ! Component: 1350 - total flux cleaned = -0.00237162 Jy ! Component: 1400 - total flux cleaned = -0.00242802 Jy ! Component: 1450 - total flux cleaned = -0.00245589 Jy ! Component: 1500 - total flux cleaned = -0.00244218 Jy ! Component: 1550 - total flux cleaned = -0.00252427 Jy ! Component: 1600 - total flux cleaned = -0.00252437 Jy ! Component: 1650 - total flux cleaned = -0.00252445 Jy ! Component: 1700 - total flux cleaned = -0.00259045 Jy ! Component: 1750 - total flux cleaned = -0.00261643 Jy ! Component: 1800 - total flux cleaned = -0.00261639 Jy ! Component: 1850 - total flux cleaned = -0.00259072 Jy ! Component: 1900 - total flux cleaned = -0.00259062 Jy ! Component: 1950 - total flux cleaned = -0.00256567 Jy ! Component: 2000 - total flux cleaned = -0.00260305 Jy ! Component: 2050 - total flux cleaned = -0.00259067 Jy ! Component: 2100 - total flux cleaned = -0.00257833 Jy ! Component: 2150 - total flux cleaned = -0.00254204 Jy ! Component: 2200 - total flux cleaned = -0.00254207 Jy ! Component: 2250 - total flux cleaned = -0.00255387 Jy ! Component: 2300 - total flux cleaned = -0.00250665 Jy ! Component: 2350 - total flux cleaned = -0.00250655 Jy ! Component: 2400 - total flux cleaned = -0.0025528 Jy ! Component: 2450 - total flux cleaned = -0.00254139 Jy ! Component: 2500 - total flux cleaned = -0.00249578 Jy ! Component: 2550 - total flux cleaned = -0.00249578 Jy ! Component: 2600 - total flux cleaned = -0.00247334 Jy ! Component: 2650 - total flux cleaned = -0.00250647 Jy ! Component: 2700 - total flux cleaned = -0.0024625 Jy ! Component: 2750 - total flux cleaned = -0.00246252 Jy ! Component: 2800 - total flux cleaned = -0.00245183 Jy ! Component: 2850 - total flux cleaned = -0.00245187 Jy ! Component: 2900 - total flux cleaned = -0.00247311 Jy ! Component: 2950 - total flux cleaned = -0.00249426 Jy ! Component: 3000 - total flux cleaned = -0.00248364 Jy ! Component: 3050 - total flux cleaned = -0.00252531 Jy ! Component: 3100 - total flux cleaned = -0.00251476 Jy ! Component: 3150 - total flux cleaned = -0.00250456 Jy ! Component: 3200 - total flux cleaned = -0.00253505 Jy ! Component: 3250 - total flux cleaned = -0.00253497 Jy ! Component: 3300 - total flux cleaned = -0.00253491 Jy ! Component: 3350 - total flux cleaned = -0.00254482 Jy ! Component: 3400 - total flux cleaned = -0.00248566 Jy ! Component: 3450 - total flux cleaned = -0.00255418 Jy ! Component: 3500 - total flux cleaned = -0.00251518 Jy ! Component: 3550 - total flux cleaned = -0.00252489 Jy ! Component: 3600 - total flux cleaned = -0.00253441 Jy ! Component: 3650 - total flux cleaned = -0.00252497 Jy ! Component: 3700 - total flux cleaned = -0.00252497 Jy ! Component: 3750 - total flux cleaned = -0.00256251 Jy ! Component: 3800 - total flux cleaned = -0.00251587 Jy ! Component: 3850 - total flux cleaned = -0.00252517 Jy ! Component: 3900 - total flux cleaned = -0.0025343 Jy ! Component: 3950 - total flux cleaned = -0.00251607 Jy ! Component: 4000 - total flux cleaned = -0.00251603 Jy ! Component: 4050 - total flux cleaned = -0.00247099 Jy ! Total flux subtracted in 4096 components = -0.00247093 Jy ! Clean residual min=-0.000487 max=0.000464 Jy/beam ! Clean residual mean=-0.000001 rms=0.000167 Jy/beam ! Combined flux in latest and established models = 0.120444 Jy keep ! Adding 290 model components to the UV plane model. ! The established model now contains 525 components and 0.120444 Jy ![Exited script file: muppet] wmap "J1008-1629_S_2015_03_17_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.953 x 7.557 at -3.619 degrees (North through East) ! Clean map min=-0.001135 max=0.058325 Jy/beam ! Writing clean map to FITS file: J1008-1629_S_2015_03_17_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0583246 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000164807 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.847704 0.847704 1.69541 3.39082 6.78163 13.5633 27.1265 54.2531 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.058 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.953 x 7.557 at -3.619 degrees (North through East) ! Clean map min=-0.001135 max=0.058325 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1008-1629_S_2015_03_17_pus_uvs.log closed on Fri Dec 30 22:56:04 2016