! Started logfile: J0923+3849_S_2015_03_17_pus_uvs.log on Fri Dec 30 22:54:11 2016 obs J0923+3849_S_2015_03_17_pus_uva.fits ! Reading UV FITS file: J0923+3849_S_2015_03_17_pus_uva.fits ! AN table 1: 15 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.74963 visibilities/baseline/integration-bin. ! Found source: J0923+3849 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 330 lines of history. ! ! Reading 2024 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0923+3849_S_2015_03_17_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.694907Jy sigma=0.009110 ! Fit after self-cal, rms=0.692427Jy sigma=0.009081 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.863 mas, bmaj=9.537 mas, bpa=-32.65 degrees ! Estimated noise=1487.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.227028 Jy ! Component: 100 - total flux cleaned = 0.288207 Jy ! Total flux subtracted in 100 components = 0.288207 Jy ! Clean residual min=-0.016528 max=0.025810 Jy/beam ! Clean residual mean=0.000138 rms=0.004764 Jy/beam ! Combined flux in latest and established models = 0.288207 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.288207 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096314Jy sigma=0.001081 ! Fit after self-cal, rms=0.096265Jy sigma=0.001081 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.341 mas, bmaj=9.991 mas, bpa=-32.72 degrees ! Estimated noise=1248.66 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0361715 Jy ! Component: 100 - total flux cleaned = 0.056967 Jy ! Component: 150 - total flux cleaned = 0.0708486 Jy ! Component: 200 - total flux cleaned = 0.0806183 Jy ! Total flux subtracted in 200 components = 0.0806183 Jy ! Clean residual min=-0.011120 max=0.010117 Jy/beam ! Clean residual mean=0.000057 rms=0.002832 Jy/beam ! Combined flux in latest and established models = 0.368826 Jy ! Performing phase self-cal ! Adding 81 model components to the UV plane model. ! The established model now contains 86 components and 0.368826 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077245Jy sigma=0.000890 ! Fit after self-cal, rms=0.077161Jy sigma=0.000889 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.89 HN 1.00* KP 1.07 ! LA 0.98 MK 0.98 NL 0.88 OV 1.02 ! PT 1.03 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.93 HN 1.00* KP 1.06 ! LA 0.94 MK 1.01 NL 1.02 OV 1.03 ! PT 1.01 SC 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.90 HN 1.00* KP 0.94 ! LA 0.77 MK 1.04 NL 1.30 OV 0.97 ! PT 1.00 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.95 HN 1.00* KP 0.93 ! LA 0.83 MK 1.07 NL 0.97 OV 1.06 ! PT 1.06 SC 1.01 ! ! ! Fit before self-cal, rms=0.077161Jy sigma=0.000889 ! Fit after self-cal, rms=0.062869Jy sigma=0.000762 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.389 mas, bmaj=10.07 mas, bpa=-32.57 degrees ! Estimated noise=1238.28 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000277466 Jy ! Component: 100 - total flux cleaned = -0.000518817 Jy ! Component: 150 - total flux cleaned = -0.000409816 Jy ! Component: 200 - total flux cleaned = -0.000319183 Jy ! Total flux subtracted in 200 components = -0.000319183 Jy ! Clean residual min=-0.004030 max=0.004523 Jy/beam ! Clean residual mean=0.000003 rms=0.001150 Jy/beam ! Combined flux in latest and established models = 0.368506 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 96 components and 0.368506 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062700Jy sigma=0.000760 ! Fit after self-cal, rms=0.062643Jy sigma=0.000760 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062643Jy sigma=0.000760 ! Fit after self-cal, rms=0.062627Jy sigma=0.000759 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.389 mas, bmaj=10.06 mas, bpa=-32.55 degrees ! Estimated noise=1237.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00101174 Jy ! Component: 100 - total flux cleaned = -0.00111748 Jy ! Component: 150 - total flux cleaned = -0.00105058 Jy ! Component: 200 - total flux cleaned = -0.00102209 Jy ! Total flux subtracted in 200 components = -0.00102209 Jy ! Clean residual min=-0.003894 max=0.004399 Jy/beam ! Clean residual mean=0.000003 rms=0.001101 Jy/beam ! Combined flux in latest and established models = 0.367484 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 105 components and 0.367484 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062559Jy sigma=0.000758 ! Fit after self-cal, rms=0.062555Jy sigma=0.000758 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000121582 Jy ! Component: 100 - total flux cleaned = 9.5611e-05 Jy ! Component: 150 - total flux cleaned = 0.000119885 Jy ! Component: 200 - total flux cleaned = 0.000120182 Jy ! Total flux subtracted in 200 components = 0.000120182 Jy ! Clean residual min=-0.003832 max=0.004362 Jy/beam ! Clean residual mean=0.000003 rms=0.001091 Jy/beam ! Combined flux in latest and established models = 0.367605 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 114 components and 0.367605 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062537Jy sigma=0.000758 ! Fit after self-cal, rms=0.062534Jy sigma=0.000758 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062534Jy sigma=0.000758 ! Fit after self-cal, rms=0.062567Jy sigma=0.000758 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.393 mas, bmaj=10.05 mas, bpa=-32.54 degrees ! Estimated noise=1236.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0012435 Jy ! Component: 100 - total flux cleaned = -0.00141123 Jy ! Component: 150 - total flux cleaned = -0.00145678 Jy ! Component: 200 - total flux cleaned = -0.00143702 Jy ! Total flux subtracted in 200 components = -0.00143702 Jy ! Clean residual min=-0.003733 max=0.004337 Jy/beam ! Clean residual mean=0.000003 rms=0.001066 Jy/beam ! Combined flux in latest and established models = 0.366168 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 121 components and 0.366168 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062537Jy sigma=0.000757 ! Fit after self-cal, rms=0.062536Jy sigma=0.000757 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.51234e-05 Jy ! Component: 100 - total flux cleaned = 2.97772e-05 Jy ! Component: 150 - total flux cleaned = 4.60363e-05 Jy ! Component: 200 - total flux cleaned = 4.58394e-05 Jy ! Total flux subtracted in 200 components = 4.58394e-05 Jy ! Clean residual min=-0.003694 max=0.004325 Jy/beam ! Clean residual mean=0.000003 rms=0.001060 Jy/beam ! Combined flux in latest and established models = 0.366213 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 127 components and 0.366213 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062528Jy sigma=0.000757 ! Fit after self-cal, rms=0.062526Jy sigma=0.000757 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062526Jy sigma=0.000757 ! Fit after self-cal, rms=0.062564Jy sigma=0.000757 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.346 mas, bmaj=10.83 mas, bpa=-17.68 degrees ! Estimated noise=1498.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000269016 Jy ! Component: 100 - total flux cleaned = -0.000488991 Jy ! Component: 150 - total flux cleaned = -0.000534932 Jy ! Component: 200 - total flux cleaned = -0.000533817 Jy ! Total flux subtracted in 200 components = -0.000533817 Jy ! Clean residual min=-0.004279 max=0.005270 Jy/beam ! Clean residual mean=0.000001 rms=0.001424 Jy/beam ! Combined flux in latest and established models = 0.36568 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 136 components and 0.36568 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062557Jy sigma=0.000757 ! Fit after self-cal, rms=0.062553Jy sigma=0.000757 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.18421e-05 Jy ! Component: 100 - total flux cleaned = -1.59275e-05 Jy ! Component: 150 - total flux cleaned = 2.30103e-07 Jy ! Component: 200 - total flux cleaned = 1.61012e-05 Jy ! Total flux subtracted in 200 components = 1.61012e-05 Jy ! Clean residual min=-0.004277 max=0.005264 Jy/beam ! Clean residual mean=0.000001 rms=0.001418 Jy/beam ! Combined flux in latest and established models = 0.365696 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 143 components and 0.365696 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062556Jy sigma=0.000757 ! Fit after self-cal, rms=0.062554Jy sigma=0.000757 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.397 mas, bmaj=10.05 mas, bpa=-32.53 degrees ! Estimated noise=1236.43 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.397 x 10.05 at -32.53 degrees (North through East) ! Clean map min=-0.0042868 max=0.30002 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.904 mas, bmaj=9.584 mas, bpa=-32.49 degrees ! Estimated noise=1488.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.22727 Jy ! Component: 100 - total flux cleaned = 0.285898 Jy ! Component: 150 - total flux cleaned = 0.312262 Jy ! Component: 200 - total flux cleaned = 0.32816 Jy ! Total flux subtracted in 200 components = 0.32816 Jy ! Clean residual min=-0.008296 max=0.009199 Jy/beam ! Clean residual mean=0.000054 rms=0.002105 Jy/beam ! Combined flux in latest and established models = 0.32816 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.32816 Jy ! Inverting map and beam ! Estimated beam: bmin=3.397 mas, bmaj=10.05 mas, bpa=-32.53 degrees ! Estimated noise=1236.43 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0137475 Jy ! Component: 100 - total flux cleaned = 0.0224954 Jy ! Component: 150 - total flux cleaned = 0.0282689 Jy ! Component: 200 - total flux cleaned = 0.0314812 Jy ! Total flux subtracted in 200 components = 0.0314812 Jy ! Clean residual min=-0.005372 max=0.004547 Jy/beam ! Clean residual mean=0.000011 rms=0.001218 Jy/beam ! Combined flux in latest and established models = 0.359641 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 72 components and 0.359641 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.346 mas, bmaj=10.83 mas, bpa=-17.68 degrees ! Estimated noise=1498.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00395301 Jy ! Component: 100 - total flux cleaned = 0.00536651 Jy ! Component: 150 - total flux cleaned = 0.00547609 Jy ! Component: 200 - total flux cleaned = 0.0056101 Jy ! Total flux subtracted in 200 components = 0.0056101 Jy ! Clean residual min=-0.004127 max=0.005457 Jy/beam ! Clean residual mean=0.000003 rms=0.001466 Jy/beam ! Combined flux in latest and established models = 0.365252 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.32232e-05 Jy ! Component: 100 - total flux cleaned = 0.000169082 Jy ! Component: 150 - total flux cleaned = 0.000256906 Jy ! Component: 200 - total flux cleaned = 0.000310975 Jy ! Total flux subtracted in 200 components = 0.000310975 Jy ! Clean residual min=-0.004141 max=0.005437 Jy/beam ! Clean residual mean=0.000002 rms=0.001447 Jy/beam ! Combined flux in latest and established models = 0.365562 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 102 components and 0.365563 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.397 mas, bmaj=10.05 mas, bpa=-32.53 degrees ! Estimated noise=1236.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000246847 Jy ! Component: 100 - total flux cleaned = -0.000454279 Jy ! Component: 150 - total flux cleaned = -0.000506128 Jy ! Component: 200 - total flux cleaned = -0.00055135 Jy ! Total flux subtracted in 200 components = -0.00055135 Jy ! Clean residual min=-0.003841 max=0.004513 Jy/beam ! Clean residual mean=0.000002 rms=0.001065 Jy/beam ! Combined flux in latest and established models = 0.365011 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 117 components and 0.365011 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062597Jy sigma=0.000758 ! Fit after self-cal, rms=0.062601Jy sigma=0.000758 wmodel J0923+3849_S_2015_03_17_pus_map.mod ! Writing 117 model components to file: J0923+3849_S_2015_03_17_pus_map.mod wobs J0923+3849_S_2015_03_17_pus_uvs.fits ! Writing UV FITS file: J0923+3849_S_2015_03_17_pus_uvs.fits wwins J0923+3849_S_2015_03_17_pus_map.win ! wwins: Wrote 1 windows to J0923+3849_S_2015_03_17_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00125385 Jy ! Component: 100 - total flux cleaned = 0.00170767 Jy ! Component: 150 - total flux cleaned = 0.00171277 Jy ! Component: 200 - total flux cleaned = 0.00143384 Jy ! Component: 250 - total flux cleaned = 0.00138061 Jy ! Component: 300 - total flux cleaned = 0.0013777 Jy ! Component: 350 - total flux cleaned = 0.00152013 Jy ! Component: 400 - total flux cleaned = 0.00147303 Jy ! Component: 450 - total flux cleaned = 0.0016061 Jy ! Component: 500 - total flux cleaned = 0.00164926 Jy ! Component: 550 - total flux cleaned = 0.00177352 Jy ! Component: 600 - total flux cleaned = 0.00189232 Jy ! Component: 650 - total flux cleaned = 0.00204425 Jy ! Component: 700 - total flux cleaned = 0.00204479 Jy ! Component: 750 - total flux cleaned = 0.00218907 Jy ! Component: 800 - total flux cleaned = 0.00222342 Jy ! Component: 850 - total flux cleaned = 0.00218878 Jy ! Component: 900 - total flux cleaned = 0.0022214 Jy ! Component: 950 - total flux cleaned = 0.00228605 Jy ! Component: 1000 - total flux cleaned = 0.00234866 Jy ! Component: 1050 - total flux cleaned = 0.00250134 Jy ! Component: 1100 - total flux cleaned = 0.00273826 Jy ! Component: 1150 - total flux cleaned = 0.00285308 Jy ! Component: 1200 - total flux cleaned = 0.00282545 Jy ! Component: 1250 - total flux cleaned = 0.00288155 Jy ! Component: 1300 - total flux cleaned = 0.00285475 Jy ! Component: 1350 - total flux cleaned = 0.00301444 Jy ! Component: 1400 - total flux cleaned = 0.00298839 Jy ! Component: 1450 - total flux cleaned = 0.00301454 Jy ! Component: 1500 - total flux cleaned = 0.00311488 Jy ! Component: 1550 - total flux cleaned = 0.00316338 Jy ! Component: 1600 - total flux cleaned = 0.00318726 Jy ! Component: 1650 - total flux cleaned = 0.00321103 Jy ! Component: 1700 - total flux cleaned = 0.00321063 Jy ! Component: 1750 - total flux cleaned = 0.00311907 Jy ! Component: 1800 - total flux cleaned = 0.00309651 Jy ! Component: 1850 - total flux cleaned = 0.0030526 Jy ! Component: 1900 - total flux cleaned = 0.0030317 Jy ! Component: 1950 - total flux cleaned = 0.00307436 Jy ! Component: 2000 - total flux cleaned = 0.00303197 Jy ! Component: 2050 - total flux cleaned = 0.00296989 Jy ! Component: 2100 - total flux cleaned = 0.00297054 Jy ! Component: 2150 - total flux cleaned = 0.00305117 Jy ! Component: 2200 - total flux cleaned = 0.00305107 Jy ! Component: 2250 - total flux cleaned = 0.00303167 Jy ! Component: 2300 - total flux cleaned = 0.0030511 Jy ! Component: 2350 - total flux cleaned = 0.00303217 Jy ! Component: 2400 - total flux cleaned = 0.00305088 Jy ! Component: 2450 - total flux cleaned = 0.00310657 Jy ! Component: 2500 - total flux cleaned = 0.00310639 Jy ! Component: 2550 - total flux cleaned = 0.00312467 Jy ! Component: 2600 - total flux cleaned = 0.00308919 Jy ! Component: 2650 - total flux cleaned = 0.003178 Jy ! Component: 2700 - total flux cleaned = 0.00316032 Jy ! Component: 2750 - total flux cleaned = 0.00317813 Jy ! Component: 2800 - total flux cleaned = 0.00326375 Jy ! Component: 2850 - total flux cleaned = 0.0032468 Jy ! Component: 2900 - total flux cleaned = 0.00329746 Jy ! Component: 2950 - total flux cleaned = 0.00326406 Jy ! Component: 3000 - total flux cleaned = 0.00328056 Jy ! Component: 3050 - total flux cleaned = 0.00323121 Jy ! Component: 3100 - total flux cleaned = 0.00319875 Jy ! Component: 3150 - total flux cleaned = 0.00316654 Jy ! Component: 3200 - total flux cleaned = 0.00316665 Jy ! Component: 3250 - total flux cleaned = 0.00321408 Jy ! Component: 3300 - total flux cleaned = 0.00321403 Jy ! Component: 3350 - total flux cleaned = 0.00316709 Jy ! Component: 3400 - total flux cleaned = 0.00319805 Jy ! Component: 3450 - total flux cleaned = 0.00321339 Jy ! Component: 3500 - total flux cleaned = 0.00322865 Jy ! Component: 3550 - total flux cleaned = 0.00324388 Jy ! Component: 3600 - total flux cleaned = 0.00327413 Jy ! Component: 3650 - total flux cleaned = 0.00330422 Jy ! Component: 3700 - total flux cleaned = 0.00327431 Jy ! Component: 3750 - total flux cleaned = 0.00325943 Jy ! Component: 3800 - total flux cleaned = 0.00322982 Jy ! Component: 3850 - total flux cleaned = 0.00324467 Jy ! Component: 3900 - total flux cleaned = 0.00328872 Jy ! Component: 3950 - total flux cleaned = 0.00324471 Jy ! Component: 4000 - total flux cleaned = 0.00323017 Jy ! Component: 4050 - total flux cleaned = 0.00323013 Jy ! Total flux subtracted in 4096 components = 0.0032156 Jy ! Clean residual min=-0.000850 max=0.000752 Jy/beam ! Clean residual mean=-0.000001 rms=0.000253 Jy/beam ! Combined flux in latest and established models = 0.368227 Jy keep ! Adding 290 model components to the UV plane model. ! The established model now contains 407 components and 0.368227 Jy ![Exited script file: muppet] wmap "J0923+3849_S_2015_03_17_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.397 x 10.05 at -32.53 degrees (North through East) ! Clean map min=-0.0027139 max=0.30161 Jy/beam ! Writing clean map to FITS file: J0923+3849_S_2015_03_17_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.301607 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000252366 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.251022 0.251022 0.502044 1.00409 2.00818 4.01635 8.0327 16.0654 32.1308 64.2616 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.301 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.397 x 10.05 at -32.53 degrees (North through East) ! Clean map min=-0.0027139 max=0.30161 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0923+3849_S_2015_03_17_pus_uvs.log closed on Fri Dec 30 22:54:16 2016