! Started logfile: J0624-0103_X_2015_03_17_pus_uvs.log on Sat Dec 31 19:01:54 2016 obs J0624-0103_X_2015_03_17_pus_uva.fits ! Reading UV FITS file: J0624-0103_X_2015_03_17_pus_uva.fits ! AN table 1: 122 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.880328 visibilities/baseline/integration-bin. ! Found source: J0624-0103 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 57996 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J0624-0103_X_2015_03_17_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 198 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 137 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 197 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 256 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 137 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 195 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.985494Jy sigma=0.010966 ! Fit after self-cal, rms=0.948999Jy sigma=0.010618 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7825 mas, bmaj=1.898 mas, bpa=-5.053 degrees ! Estimated noise=662.362 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0407191 Jy ! Component: 100 - total flux cleaned = 0.0506268 Jy ! Total flux subtracted in 100 components = 0.0506268 Jy ! Clean residual min=-0.002372 max=0.003686 Jy/beam ! Clean residual mean=-0.000001 rms=0.000629 Jy/beam ! Combined flux in latest and established models = 0.0506268 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0506268 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075466Jy sigma=0.000773 ! Fit after self-cal, rms=0.075078Jy sigma=0.000770 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00435584 Jy ! Component: 100 - total flux cleaned = 0.00654972 Jy ! Total flux subtracted in 100 components = 0.00654972 Jy ! Clean residual min=-0.001915 max=0.002616 Jy/beam ! Clean residual mean=0.000005 rms=0.000515 Jy/beam ! Combined flux in latest and established models = 0.0571765 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 19 components and 0.0571765 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074791Jy sigma=0.000767 ! Fit after self-cal, rms=0.074777Jy sigma=0.000767 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.001 mas, bmaj=2.263 mas, bpa=-3.421 degrees ! Estimated noise=280.802 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00191553 Jy ! Component: 100 - total flux cleaned = 0.00295141 Jy ! Component: 150 - total flux cleaned = 0.00356615 Jy ! Component: 200 - total flux cleaned = 0.00375566 Jy ! Total flux subtracted in 200 components = 0.00375566 Jy ! Clean residual min=-0.002093 max=0.002971 Jy/beam ! Clean residual mean=0.000010 rms=0.000596 Jy/beam ! Combined flux in latest and established models = 0.0609322 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 27 components and 0.0609322 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074723Jy sigma=0.000766 ! Fit after self-cal, rms=0.074727Jy sigma=0.000766 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.11 HN 1.04 KP 1.02 ! LA 1.01 MK 0.98 NL 1.03 OV 1.00 ! PT 1.06 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.14 HN 1.05 KP 0.90 ! LA 1.01 MK 1.01 NL 1.01 OV 0.99 ! PT 1.06 SC 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.15 HN 1.05 KP 0.88 ! LA 0.99 MK 1.01 NL 1.00 OV 0.97 ! PT 0.97 SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.21 HN 1.07 KP 0.84 ! LA 1.04 MK 0.97 NL 1.02 OV 1.01 ! PT 0.96 SC 1.00 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.08 HN 1.04 KP 0.81 ! LA 1.02 MK 0.97 NL 1.04 OV 0.98 ! PT 0.97 SC 1.05 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.14 HN 1.02 KP 0.83 ! LA 1.02 MK 1.00* NL 1.03 OV 0.97 ! PT 1.00 SC 0.97 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.14 HN 1.09 KP 0.83 ! LA 1.02 MK 0.98 NL 0.98 OV 1.03 ! PT 1.00 SC 1.02 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.18 HN 1.05 KP 0.83 ! LA 0.99 MK 0.92 NL 0.97 OV 0.98 ! PT 0.97 SC 1.07 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.13 HN 1.01 KP 0.83 ! LA 1.06 MK 0.94 NL 1.00 OV 1.04 ! PT 0.98 SC 1.04 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.25 HN 1.09 KP 0.82 ! LA 1.02 MK 1.00* NL 1.00 OV 1.02 ! PT 0.92 SC 0.97 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.06 HN 0.99 KP 0.93 ! LA 1.05 MK 0.93 NL 1.03 OV 0.98 ! PT 1.01 SC 1.00 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.12 HN 1.09 KP 0.91 ! LA 0.99 MK 0.86 NL 0.98 OV 0.98 ! PT 0.99 SC 0.95 ! ! ! Fit before self-cal, rms=0.074727Jy sigma=0.000766 ! Fit after self-cal, rms=0.074774Jy sigma=0.000764 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.999 mas, bmaj=2.262 mas, bpa=-3.757 degrees ! Estimated noise=281.412 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.2, -4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00241718 Jy ! Component: 100 - total flux cleaned = 0.00354043 Jy ! Component: 150 - total flux cleaned = 0.00389742 Jy ! Component: 200 - total flux cleaned = 0.00396817 Jy ! Total flux subtracted in 200 components = 0.00396817 Jy ! Clean residual min=-0.001241 max=0.001696 Jy/beam ! Clean residual mean=0.000001 rms=0.000384 Jy/beam ! Combined flux in latest and established models = 0.0649003 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 45 components and 0.0649003 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074699Jy sigma=0.000763 ! Fit after self-cal, rms=0.074713Jy sigma=0.000762 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074713Jy sigma=0.000762 ! Fit after self-cal, rms=0.074412Jy sigma=0.000762 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1 mas, bmaj=2.259 mas, bpa=-3.691 degrees ! Estimated noise=280.542 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.001261 Jy ! Component: 100 - total flux cleaned = 0.00192536 Jy ! Component: 150 - total flux cleaned = 0.00202865 Jy ! Component: 200 - total flux cleaned = 0.0020287 Jy ! Total flux subtracted in 200 components = 0.0020287 Jy ! Clean residual min=-0.001080 max=0.001607 Jy/beam ! Clean residual mean=0.000000 rms=0.000346 Jy/beam ! Combined flux in latest and established models = 0.066929 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 66 components and 0.066929 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074388Jy sigma=0.000762 ! Fit after self-cal, rms=0.074392Jy sigma=0.000761 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2, -9.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00169339 Jy ! Component: 100 - total flux cleaned = 0.00270082 Jy ! Component: 150 - total flux cleaned = 0.00340208 Jy ! Component: 200 - total flux cleaned = 0.00390476 Jy ! Total flux subtracted in 200 components = 0.00390476 Jy ! Clean residual min=-0.000911 max=0.001100 Jy/beam ! Clean residual mean=-0.000002 rms=0.000261 Jy/beam ! Combined flux in latest and established models = 0.0708338 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 98 components and 0.0708338 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074348Jy sigma=0.000761 ! Fit after self-cal, rms=0.074345Jy sigma=0.000761 ! Inverting map ! Added new window around map position (-4.6, -13.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00116427 Jy ! Component: 100 - total flux cleaned = 0.00187067 Jy ! Component: 150 - total flux cleaned = 0.00243087 Jy ! Component: 200 - total flux cleaned = 0.00288749 Jy ! Total flux subtracted in 200 components = 0.00288749 Jy ! Clean residual min=-0.000857 max=0.000722 Jy/beam ! Clean residual mean=-0.000002 rms=0.000229 Jy/beam ! Combined flux in latest and established models = 0.0737213 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 128 components and 0.0737213 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074323Jy sigma=0.000761 ! Fit after self-cal, rms=0.074322Jy sigma=0.000760 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074322Jy sigma=0.000760 ! Fit after self-cal, rms=0.074286Jy sigma=0.000760 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1 mas, bmaj=2.257 mas, bpa=-3.684 degrees ! Estimated noise=280.191 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000716984 Jy ! Component: 100 - total flux cleaned = 0.00122469 Jy ! Component: 150 - total flux cleaned = 0.00163113 Jy ! Component: 200 - total flux cleaned = 0.00195198 Jy ! Total flux subtracted in 200 components = 0.00195198 Jy ! Clean residual min=-0.000794 max=0.000650 Jy/beam ! Clean residual mean=-0.000002 rms=0.000188 Jy/beam ! Combined flux in latest and established models = 0.0756732 Jy selfcal ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 145 components and 0.0756732 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074276Jy sigma=0.000760 ! Fit after self-cal, rms=0.074280Jy sigma=0.000760 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000409113 Jy ! Component: 100 - total flux cleaned = 0.000721571 Jy ! Component: 150 - total flux cleaned = 0.000845373 Jy ! Component: 200 - total flux cleaned = 0.000895825 Jy ! Total flux subtracted in 200 components = 0.000895825 Jy ! Clean residual min=-0.000772 max=0.000636 Jy/beam ! Clean residual mean=-0.000002 rms=0.000187 Jy/beam ! Combined flux in latest and established models = 0.0765691 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 153 components and 0.0765691 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074276Jy sigma=0.000760 ! Fit after self-cal, rms=0.074276Jy sigma=0.000760 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074276Jy sigma=0.000760 ! Fit after self-cal, rms=0.074355Jy sigma=0.000760 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.287 mas, bmaj=3.551 mas, bpa=-3.726 degrees ! Estimated noise=343.447 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000416322 Jy ! Component: 100 - total flux cleaned = 0.00067384 Jy ! Component: 150 - total flux cleaned = 0.000771675 Jy ! Component: 200 - total flux cleaned = 0.000832137 Jy ! Total flux subtracted in 200 components = 0.000832137 Jy ! Clean residual min=-0.000792 max=0.000780 Jy/beam ! Clean residual mean=-0.000006 rms=0.000212 Jy/beam ! Combined flux in latest and established models = 0.0774012 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 170 components and 0.0774012 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074353Jy sigma=0.000760 ! Fit after self-cal, rms=0.074355Jy sigma=0.000760 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000145504 Jy ! Component: 100 - total flux cleaned = 0.000239535 Jy ! Component: 150 - total flux cleaned = 0.000288384 Jy ! Component: 200 - total flux cleaned = 0.000315891 Jy ! Total flux subtracted in 200 components = 0.000315891 Jy ! Clean residual min=-0.000792 max=0.000796 Jy/beam ! Clean residual mean=-0.000005 rms=0.000212 Jy/beam ! Combined flux in latest and established models = 0.0777171 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 181 components and 0.0777171 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074354Jy sigma=0.000760 ! Fit after self-cal, rms=0.074354Jy sigma=0.000760 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.9999 mas, bmaj=2.255 mas, bpa=-3.689 degrees ! Estimated noise=280.386 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9999 x 2.255 at -3.689 degrees (North through East) ! Clean map min=-0.00070878 max=0.053265 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7775 mas, bmaj=1.892 mas, bpa=-5.308 degrees ! Estimated noise=655.196 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0403566 Jy ! Component: 100 - total flux cleaned = 0.0505654 Jy ! Component: 150 - total flux cleaned = 0.0556225 Jy ! Component: 200 - total flux cleaned = 0.0589194 Jy ! Total flux subtracted in 200 components = 0.0589194 Jy ! Clean residual min=-0.002166 max=0.001835 Jy/beam ! Clean residual mean=-0.000001 rms=0.000468 Jy/beam ! Combined flux in latest and established models = 0.0589194 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.0589194 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9999 mas, bmaj=2.255 mas, bpa=-3.689 degrees ! Estimated noise=280.386 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0034139 Jy ! Component: 100 - total flux cleaned = 0.0058946 Jy ! Component: 150 - total flux cleaned = 0.00786591 Jy ! Component: 200 - total flux cleaned = 0.00947538 Jy ! Total flux subtracted in 200 components = 0.00947538 Jy ! Clean residual min=-0.001335 max=0.000974 Jy/beam ! Clean residual mean=-0.000001 rms=0.000318 Jy/beam ! Combined flux in latest and established models = 0.0683948 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 68 components and 0.0683948 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.287 mas, bmaj=3.551 mas, bpa=-3.726 degrees ! Estimated noise=343.447 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00196616 Jy ! Component: 100 - total flux cleaned = 0.00341053 Jy ! Component: 150 - total flux cleaned = 0.00451879 Jy ! Component: 200 - total flux cleaned = 0.00538892 Jy ! Total flux subtracted in 200 components = 0.00538892 Jy ! Clean residual min=-0.001109 max=0.000715 Jy/beam ! Clean residual mean=-0.000005 rms=0.000280 Jy/beam ! Combined flux in latest and established models = 0.0737837 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000695788 Jy ! Component: 100 - total flux cleaned = 0.00126875 Jy ! Component: 150 - total flux cleaned = 0.00174641 Jy ! Component: 200 - total flux cleaned = 0.00215201 Jy ! Total flux subtracted in 200 components = 0.00215201 Jy ! Clean residual min=-0.000937 max=0.000743 Jy/beam ! Clean residual mean=-0.000005 rms=0.000230 Jy/beam ! Combined flux in latest and established models = 0.0759357 Jy ! Adding 75 model components to the UV plane model. ! The established model now contains 132 components and 0.0759357 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9999 mas, bmaj=2.255 mas, bpa=-3.689 degrees ! Estimated noise=280.386 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000228337 Jy ! Component: 100 - total flux cleaned = 0.000487498 Jy ! Component: 150 - total flux cleaned = 0.000626422 Jy ! Component: 200 - total flux cleaned = 0.000704223 Jy ! Total flux subtracted in 200 components = 0.000704223 Jy ! Clean residual min=-0.000873 max=0.000667 Jy/beam ! Clean residual mean=-0.000002 rms=0.000190 Jy/beam ! Combined flux in latest and established models = 0.0766399 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 154 components and 0.0766399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074363Jy sigma=0.000760 ! Fit after self-cal, rms=0.074363Jy sigma=0.000760 wmodel J0624-0103_X_2015_03_17_pus_map.mod ! Writing 154 model components to file: J0624-0103_X_2015_03_17_pus_map.mod wobs J0624-0103_X_2015_03_17_pus_uvs.fits ! Writing UV FITS file: J0624-0103_X_2015_03_17_pus_uvs.fits wwins J0624-0103_X_2015_03_17_pus_map.win ! wwins: Wrote 4 windows to J0624-0103_X_2015_03_17_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000235163 Jy ! Component: 100 - total flux cleaned = -0.000351436 Jy ! Component: 150 - total flux cleaned = -0.00038475 Jy ! Component: 200 - total flux cleaned = -0.000437404 Jy ! Component: 250 - total flux cleaned = -0.000447555 Jy ! Component: 300 - total flux cleaned = -0.000447621 Jy ! Component: 350 - total flux cleaned = -0.000447617 Jy ! Component: 400 - total flux cleaned = -0.000438477 Jy ! Component: 450 - total flux cleaned = -0.000438411 Jy ! Component: 500 - total flux cleaned = -0.000438357 Jy ! Component: 550 - total flux cleaned = -0.000455102 Jy ! Component: 600 - total flux cleaned = -0.000446772 Jy ! Component: 650 - total flux cleaned = -0.000438713 Jy ! Component: 700 - total flux cleaned = -0.000422964 Jy ! Component: 750 - total flux cleaned = -0.000391981 Jy ! Component: 800 - total flux cleaned = -0.000376838 Jy ! Component: 850 - total flux cleaned = -0.000346888 Jy ! Component: 900 - total flux cleaned = -0.00031753 Jy ! Component: 950 - total flux cleaned = -0.000281606 Jy ! Component: 1000 - total flux cleaned = -0.000246309 Jy ! Component: 1050 - total flux cleaned = -0.000218413 Jy ! Component: 1100 - total flux cleaned = -0.000184101 Jy ! Component: 1150 - total flux cleaned = -0.000150353 Jy ! Component: 1200 - total flux cleaned = -0.000130395 Jy ! Component: 1250 - total flux cleaned = -0.000110712 Jy ! Component: 1300 - total flux cleaned = -9.12375e-05 Jy ! Component: 1350 - total flux cleaned = -5.9264e-05 Jy ! Component: 1400 - total flux cleaned = -3.40148e-05 Jy ! Component: 1450 - total flux cleaned = -2.87727e-06 Jy ! Component: 1500 - total flux cleaned = 1.54935e-05 Jy ! Component: 1550 - total flux cleaned = 2.76278e-05 Jy ! Component: 1600 - total flux cleaned = 3.96129e-05 Jy ! Component: 1650 - total flux cleaned = 6.32779e-05 Jy ! Component: 1700 - total flux cleaned = 7.48768e-05 Jy ! Component: 1750 - total flux cleaned = 7.49362e-05 Jy ! Component: 1800 - total flux cleaned = 8.629e-05 Jy ! Component: 1850 - total flux cleaned = 9.1877e-05 Jy ! Component: 1900 - total flux cleaned = 9.74884e-05 Jy ! Component: 1950 - total flux cleaned = 0.000135983 Jy ! Component: 2000 - total flux cleaned = 0.000135915 Jy ! Total flux subtracted in 2048 components = 0.000157432 Jy ! Clean residual min=-0.000342 max=0.000290 Jy/beam ! Clean residual mean=-0.000002 rms=0.000101 Jy/beam ! Combined flux in latest and established models = 0.0767974 Jy keep ! Adding 129 model components to the UV plane model. ! The established model now contains 283 components and 0.0767973 Jy ![Exited script file: muppet] wmap "J0624-0103_X_2015_03_17_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9999 x 2.255 at -3.689 degrees (North through East) ! Clean map min=-0.00069179 max=0.053653 Jy/beam ! Writing clean map to FITS file: J0624-0103_X_2015_03_17_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0536533 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00010123 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.566021 0.566021 1.13204 2.26408 4.52816 9.05633 18.1127 36.2253 72.4506 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.053 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9999 x 2.255 at -3.689 degrees (North through East) ! Clean map min=-0.00069179 max=0.053653 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0624-0103_X_2015_03_17_pus_uvs.log closed on Sat Dec 31 19:01:58 2016