! Started logfile: J0601-2736_S_2015_03_17_pus_uvs.log on Fri Dec 30 22:49:19 2016 obs J0601-2736_S_2015_03_17_pus_uva.fits ! Reading UV FITS file: J0601-2736_S_2015_03_17_pus_uva.fits ! AN table 1: 124 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.973297 visibilities/baseline/integration-bin. ! Found source: J0601-2736 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 330 lines of history. ! ! Reading 21724 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0601-2736_S_2015_03_17_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.983880Jy sigma=0.008624 ! Fit after self-cal, rms=0.942186Jy sigma=0.008276 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.392 mas, bmaj=6.371 mas, bpa=-8.257 degrees ! Estimated noise=1060.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0431215 Jy ! Component: 100 - total flux cleaned = 0.0562963 Jy ! Total flux subtracted in 100 components = 0.0562963 Jy ! Clean residual min=-0.004092 max=0.006396 Jy/beam ! Clean residual mean=-0.000009 rms=0.001096 Jy/beam ! Combined flux in latest and established models = 0.0562964 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0562964 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097563Jy sigma=0.000789 ! Fit after self-cal, rms=0.097122Jy sigma=0.000785 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00746023 Jy ! Component: 100 - total flux cleaned = 0.0117062 Jy ! Total flux subtracted in 100 components = 0.0117062 Jy ! Clean residual min=-0.003954 max=0.004479 Jy/beam ! Clean residual mean=0.000002 rms=0.000963 Jy/beam ! Combined flux in latest and established models = 0.0680025 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 33 components and 0.0680025 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096158Jy sigma=0.000778 ! Fit after self-cal, rms=0.096100Jy sigma=0.000777 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.938 mas, bmaj=7.596 mas, bpa=-7.09 degrees ! Estimated noise=556.372 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, -8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0067893 Jy ! Component: 100 - total flux cleaned = 0.0105713 Jy ! Component: 150 - total flux cleaned = 0.0128795 Jy ! Component: 200 - total flux cleaned = 0.0144234 Jy ! Total flux subtracted in 200 components = 0.0144234 Jy ! Clean residual min=-0.002466 max=0.002742 Jy/beam ! Clean residual mean=0.000021 rms=0.000597 Jy/beam ! Combined flux in latest and established models = 0.0824259 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 81 components and 0.0824259 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095532Jy sigma=0.000773 ! Fit after self-cal, rms=0.095461Jy sigma=0.000773 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.85 HN 1.02 KP 1.03 ! LA 0.89 MK 0.91 NL 0.90 OV 1.04 ! PT 1.05 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.89 HN 1.14 KP 1.08 ! LA 0.95 MK 0.95 NL 1.11 OV 1.04 ! PT 1.10 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.85 HN 1.10 KP 0.98 ! LA 0.79 MK 1.05 NL 1.16 OV 0.97 ! PT 0.99 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.91 HN 1.05 KP 1.03 ! LA 0.84 MK 1.04 NL 1.07 OV 1.05 ! PT 1.02 SC 1.01 ! ! ! Fit before self-cal, rms=0.095461Jy sigma=0.000773 ! Fit after self-cal, rms=0.093968Jy sigma=0.000770 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.959 mas, bmaj=7.648 mas, bpa=-7.315 degrees ! Estimated noise=555.765 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000949816 Jy ! Component: 100 - total flux cleaned = 0.00109452 Jy ! Component: 150 - total flux cleaned = 0.00111946 Jy ! Component: 200 - total flux cleaned = 0.00113752 Jy ! Total flux subtracted in 200 components = 0.00113752 Jy ! Clean residual min=-0.001680 max=0.001810 Jy/beam ! Clean residual mean=0.000021 rms=0.000448 Jy/beam ! Combined flux in latest and established models = 0.0835634 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 97 components and 0.0835634 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093950Jy sigma=0.000770 ! Fit after self-cal, rms=0.093937Jy sigma=0.000769 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093937Jy sigma=0.000769 ! Fit after self-cal, rms=0.093832Jy sigma=0.000769 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.957 mas, bmaj=7.673 mas, bpa=-7.303 degrees ! Estimated noise=555.921 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000670333 Jy ! Component: 100 - total flux cleaned = 0.000773561 Jy ! Component: 150 - total flux cleaned = 0.000773658 Jy ! Component: 200 - total flux cleaned = 0.000790235 Jy ! Total flux subtracted in 200 components = 0.000790235 Jy ! Clean residual min=-0.001630 max=0.001675 Jy/beam ! Clean residual mean=0.000018 rms=0.000426 Jy/beam ! Combined flux in latest and established models = 0.0843537 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 109 components and 0.0843536 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093820Jy sigma=0.000769 ! Fit after self-cal, rms=0.093819Jy sigma=0.000769 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000322047 Jy ! Component: 100 - total flux cleaned = 0.000303279 Jy ! Component: 150 - total flux cleaned = 0.000271652 Jy ! Component: 200 - total flux cleaned = 0.000271445 Jy ! Total flux subtracted in 200 components = 0.000271445 Jy ! Clean residual min=-0.001655 max=0.001627 Jy/beam ! Clean residual mean=0.000018 rms=0.000424 Jy/beam ! Combined flux in latest and established models = 0.0846251 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 121 components and 0.0846251 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093813Jy sigma=0.000769 ! Fit after self-cal, rms=0.093811Jy sigma=0.000769 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093811Jy sigma=0.000769 ! Fit after self-cal, rms=0.093494Jy sigma=0.000769 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.955 mas, bmaj=7.698 mas, bpa=-7.309 degrees ! Estimated noise=554.538 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000316233 Jy ! Component: 100 - total flux cleaned = 0.000377785 Jy ! Component: 150 - total flux cleaned = 0.000378298 Jy ! Component: 200 - total flux cleaned = 0.000392613 Jy ! Total flux subtracted in 200 components = 0.000392613 Jy ! Clean residual min=-0.001562 max=0.001693 Jy/beam ! Clean residual mean=0.000016 rms=0.000415 Jy/beam ! Combined flux in latest and established models = 0.0850177 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 134 components and 0.0850177 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093487Jy sigma=0.000768 ! Fit after self-cal, rms=0.093486Jy sigma=0.000768 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00014105 Jy ! Component: 100 - total flux cleaned = 0.000112219 Jy ! Component: 150 - total flux cleaned = 0.000100154 Jy ! Component: 200 - total flux cleaned = 0.000100726 Jy ! Total flux subtracted in 200 components = 0.000100726 Jy ! Clean residual min=-0.001580 max=0.001679 Jy/beam ! Clean residual mean=0.000017 rms=0.000415 Jy/beam ! Combined flux in latest and established models = 0.0851184 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 138 components and 0.0851184 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093482Jy sigma=0.000768 ! Fit after self-cal, rms=0.093480Jy sigma=0.000768 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093480Jy sigma=0.000768 ! Fit after self-cal, rms=0.093317Jy sigma=0.000768 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.568 mas, bmaj=18.11 mas, bpa=-1.287 degrees ! Estimated noise=732.112 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000247018 Jy ! Component: 100 - total flux cleaned = 0.000248409 Jy ! Component: 150 - total flux cleaned = 0.000248649 Jy ! Component: 200 - total flux cleaned = 0.000248873 Jy ! Total flux subtracted in 200 components = 0.000248873 Jy ! Clean residual min=-0.001651 max=0.002367 Jy/beam ! Clean residual mean=0.000035 rms=0.000552 Jy/beam ! Combined flux in latest and established models = 0.0853673 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 156 components and 0.0853673 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093315Jy sigma=0.000768 ! Fit after self-cal, rms=0.093311Jy sigma=0.000768 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.51727e-05 Jy ! Component: 100 - total flux cleaned = 2.63705e-05 Jy ! Component: 150 - total flux cleaned = 2.03704e-05 Jy ! Component: 200 - total flux cleaned = 1.47433e-05 Jy ! Total flux subtracted in 200 components = 1.47433e-05 Jy ! Clean residual min=-0.001669 max=0.002374 Jy/beam ! Clean residual mean=0.000036 rms=0.000554 Jy/beam ! Combined flux in latest and established models = 0.085382 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 163 components and 0.085382 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093310Jy sigma=0.000768 ! Fit after self-cal, rms=0.093304Jy sigma=0.000768 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.955 mas, bmaj=7.72 mas, bpa=-7.328 degrees ! Estimated noise=553.873 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.955 x 7.72 at -7.328 degrees (North through East) ! Clean map min=-0.001545 max=0.052727 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.403 mas, bmaj=6.436 mas, bpa=-8.526 degrees ! Estimated noise=1061.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0428697 Jy ! Component: 100 - total flux cleaned = 0.0575254 Jy ! Component: 150 - total flux cleaned = 0.0657874 Jy ! Component: 200 - total flux cleaned = 0.0711207 Jy ! Total flux subtracted in 200 components = 0.0711207 Jy ! Clean residual min=-0.003643 max=0.003484 Jy/beam ! Clean residual mean=-0.000005 rms=0.000934 Jy/beam ! Combined flux in latest and established models = 0.0711206 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.0711206 Jy ! Inverting map and beam ! Estimated beam: bmin=2.955 mas, bmaj=7.72 mas, bpa=-7.328 degrees ! Estimated noise=553.873 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00631545 Jy ! Component: 100 - total flux cleaned = 0.0097359 Jy ! Component: 150 - total flux cleaned = 0.0117583 Jy ! Component: 200 - total flux cleaned = 0.0129925 Jy ! Total flux subtracted in 200 components = 0.0129925 Jy ! Clean residual min=-0.001653 max=0.001733 Jy/beam ! Clean residual mean=0.000015 rms=0.000426 Jy/beam ! Combined flux in latest and established models = 0.0841131 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 67 components and 0.0841131 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.568 mas, bmaj=18.11 mas, bpa=-1.287 degrees ! Estimated noise=732.112 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106442 Jy ! Component: 100 - total flux cleaned = 0.00120774 Jy ! Component: 150 - total flux cleaned = 0.00122711 Jy ! Component: 200 - total flux cleaned = 0.00121053 Jy ! Total flux subtracted in 200 components = 0.00121053 Jy ! Clean residual min=-0.001722 max=0.002397 Jy/beam ! Clean residual mean=0.000036 rms=0.000558 Jy/beam ! Combined flux in latest and established models = 0.0853237 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-28.5, -105). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00192276 Jy ! Component: 100 - total flux cleaned = 0.00205637 Jy ! Component: 150 - total flux cleaned = 0.00221242 Jy ! Component: 200 - total flux cleaned = 0.00241542 Jy ! Total flux subtracted in 200 components = 0.00241542 Jy ! Clean residual min=-0.001498 max=0.001786 Jy/beam ! Clean residual mean=0.000025 rms=0.000464 Jy/beam ! Combined flux in latest and established models = 0.0877391 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 134 components and 0.0877391 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.955 mas, bmaj=7.72 mas, bpa=-7.328 degrees ! Estimated noise=553.873 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.35187e-05 Jy ! Component: 100 - total flux cleaned = 0.00024263 Jy ! Component: 150 - total flux cleaned = 0.000210011 Jy ! Component: 200 - total flux cleaned = 0.00029672 Jy ! Total flux subtracted in 200 components = 0.00029672 Jy ! Clean residual min=-0.001437 max=0.001478 Jy/beam ! Clean residual mean=0.000011 rms=0.000372 Jy/beam ! Combined flux in latest and established models = 0.0880358 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 173 components and 0.0880358 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093263Jy sigma=0.000768 ! Fit after self-cal, rms=0.093246Jy sigma=0.000768 wmodel J0601-2736_S_2015_03_17_pus_map.mod ! Writing 173 model components to file: J0601-2736_S_2015_03_17_pus_map.mod wobs J0601-2736_S_2015_03_17_pus_uvs.fits ! Writing UV FITS file: J0601-2736_S_2015_03_17_pus_uvs.fits wwins J0601-2736_S_2015_03_17_pus_map.win ! wwins: Wrote 3 windows to J0601-2736_S_2015_03_17_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -5.40898e-05 Jy ! Component: 100 - total flux cleaned = -0.000107801 Jy ! Component: 150 - total flux cleaned = -5.80747e-05 Jy ! Component: 200 - total flux cleaned = -9.39273e-06 Jy ! Component: 250 - total flux cleaned = 0.000106611 Jy ! Component: 300 - total flux cleaned = 8.37699e-05 Jy ! Component: 350 - total flux cleaned = 6.18733e-05 Jy ! Component: 400 - total flux cleaned = 8.32635e-05 Jy ! Component: 450 - total flux cleaned = 6.24303e-05 Jy ! Component: 500 - total flux cleaned = 8.28385e-05 Jy ! Component: 550 - total flux cleaned = 0.000102934 Jy ! Component: 600 - total flux cleaned = 0.000142568 Jy ! Component: 650 - total flux cleaned = 0.000181189 Jy ! Component: 700 - total flux cleaned = 0.000180898 Jy ! Component: 750 - total flux cleaned = 0.000143582 Jy ! Component: 800 - total flux cleaned = 0.00012563 Jy ! Component: 850 - total flux cleaned = 0.000143954 Jy ! Component: 900 - total flux cleaned = 0.000197377 Jy ! Component: 950 - total flux cleaned = 0.000179499 Jy ! Component: 1000 - total flux cleaned = 0.000196815 Jy ! Component: 1050 - total flux cleaned = 0.000231196 Jy ! Component: 1100 - total flux cleaned = 0.000214305 Jy ! Component: 1150 - total flux cleaned = 0.0002644 Jy ! Component: 1200 - total flux cleaned = 0.000264671 Jy ! Component: 1250 - total flux cleaned = 0.000313587 Jy ! Component: 1300 - total flux cleaned = 0.000329565 Jy ! Component: 1350 - total flux cleaned = 0.000313938 Jy ! Component: 1400 - total flux cleaned = 0.000345552 Jy ! Component: 1450 - total flux cleaned = 0.00040819 Jy ! Component: 1500 - total flux cleaned = 0.000500358 Jy ! Component: 1550 - total flux cleaned = 0.000454568 Jy ! Component: 1600 - total flux cleaned = 0.000545004 Jy ! Component: 1650 - total flux cleaned = 0.000559861 Jy ! Component: 1700 - total flux cleaned = 0.000618924 Jy ! Component: 1750 - total flux cleaned = 0.000721051 Jy ! Component: 1800 - total flux cleaned = 0.000706771 Jy ! Component: 1850 - total flux cleaned = 0.000721031 Jy ! Component: 1900 - total flux cleaned = 0.000749405 Jy ! Component: 1950 - total flux cleaned = 0.000763658 Jy ! Component: 2000 - total flux cleaned = 0.000791605 Jy ! Component: 2050 - total flux cleaned = 0.000833217 Jy ! Component: 2100 - total flux cleaned = 0.000888169 Jy ! Component: 2150 - total flux cleaned = 0.000888139 Jy ! Component: 2200 - total flux cleaned = 0.000941965 Jy ! Component: 2250 - total flux cleaned = 0.000968686 Jy ! Component: 2300 - total flux cleaned = 0.000968605 Jy ! Component: 2350 - total flux cleaned = 0.000942356 Jy ! Component: 2400 - total flux cleaned = 0.000955354 Jy ! Component: 2450 - total flux cleaned = 0.000981199 Jy ! Component: 2500 - total flux cleaned = 0.000955389 Jy ! Component: 2550 - total flux cleaned = 0.000942753 Jy ! Component: 2600 - total flux cleaned = 0.000993351 Jy ! Component: 2650 - total flux cleaned = 0.00103091 Jy ! Component: 2700 - total flux cleaned = 0.00101843 Jy ! Component: 2750 - total flux cleaned = 0.0010675 Jy ! Component: 2800 - total flux cleaned = 0.00104322 Jy ! Component: 2850 - total flux cleaned = 0.00114022 Jy ! Component: 2900 - total flux cleaned = 0.00112824 Jy ! Component: 2950 - total flux cleaned = 0.00119969 Jy ! Component: 3000 - total flux cleaned = 0.00119982 Jy ! Component: 3050 - total flux cleaned = 0.00118798 Jy ! Component: 3100 - total flux cleaned = 0.00126979 Jy ! Component: 3150 - total flux cleaned = 0.00125795 Jy ! Component: 3200 - total flux cleaned = 0.0012579 Jy ! Component: 3250 - total flux cleaned = 0.00132656 Jy ! Component: 3300 - total flux cleaned = 0.0012699 Jy ! Component: 3350 - total flux cleaned = 0.00129245 Jy ! Component: 3400 - total flux cleaned = 0.00130363 Jy ! Component: 3450 - total flux cleaned = 0.00135916 Jy ! Component: 3500 - total flux cleaned = 0.001326 Jy ! Component: 3550 - total flux cleaned = 0.0014025 Jy ! Component: 3600 - total flux cleaned = 0.00143524 Jy ! Component: 3650 - total flux cleaned = 0.00144606 Jy ! Component: 3700 - total flux cleaned = 0.00145688 Jy ! Component: 3750 - total flux cleaned = 0.0014675 Jy ! Component: 3800 - total flux cleaned = 0.00145674 Jy ! Component: 3850 - total flux cleaned = 0.00148835 Jy ! Component: 3900 - total flux cleaned = 0.00147809 Jy ! Component: 3950 - total flux cleaned = 0.00153009 Jy ! Component: 4000 - total flux cleaned = 0.00149917 Jy ! Component: 4050 - total flux cleaned = 0.0015196 Jy ! Total flux subtracted in 4096 components = 0.00155027 Jy ! Clean residual min=-0.000652 max=0.000629 Jy/beam ! Clean residual mean=0.000002 rms=0.000187 Jy/beam ! Combined flux in latest and established models = 0.0895861 Jy keep ! Adding 307 model components to the UV plane model. ! The established model now contains 480 components and 0.0895861 Jy ![Exited script file: muppet] wmap "J0601-2736_S_2015_03_17_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.955 x 7.72 at -7.328 degrees (North through East) ! Clean map min=-0.0011074 max=0.051968 Jy/beam ! Writing clean map to FITS file: J0601-2736_S_2015_03_17_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0519678 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000185298 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.06969 1.06969 2.13937 4.27875 8.5575 17.115 34.23 68.46 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.051 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.955 x 7.72 at -7.328 degrees (North through East) ! Clean map min=-0.0011074 max=0.051968 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0601-2736_S_2015_03_17_pus_uvs.log closed on Fri Dec 30 22:49:25 2016