! Started logfile: J0539+1433_S_2015_03_17_pus_uvs.log on Fri Dec 30 22:48:18 2016 obs J0539+1433_S_2015_03_17_pus_uva.fits ! Reading UV FITS file: J0539+1433_S_2015_03_17_pus_uva.fits ! AN table 1: 14 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.722222 visibilities/baseline/integration-bin. ! Found source: J0539+1433 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 330 lines of history. ! ! Reading 1820 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0539+1433_S_2015_03_17_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.631890Jy sigma=0.006689 ! Fit after self-cal, rms=0.624852Jy sigma=0.006613 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.697 mas, bmaj=9.748 mas, bpa=19.61 degrees ! Estimated noise=1992.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.295071 Jy ! Component: 100 - total flux cleaned = 0.359939 Jy ! Total flux subtracted in 100 components = 0.359939 Jy ! Clean residual min=-0.025483 max=0.030576 Jy/beam ! Clean residual mean=-0.000324 rms=0.007633 Jy/beam ! Combined flux in latest and established models = 0.359939 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.359939 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126572Jy sigma=0.001159 ! Fit after self-cal, rms=0.126574Jy sigma=0.001159 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.169 mas, bmaj=10.17 mas, bpa=20.46 degrees ! Estimated noise=1687.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0275752 Jy ! Component: 100 - total flux cleaned = 0.0458229 Jy ! Component: 150 - total flux cleaned = 0.0583565 Jy ! Component: 200 - total flux cleaned = 0.0670121 Jy ! Total flux subtracted in 200 components = 0.0670121 Jy ! Clean residual min=-0.022972 max=0.022115 Jy/beam ! Clean residual mean=-0.000111 rms=0.005892 Jy/beam ! Combined flux in latest and established models = 0.426951 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 28 components and 0.426951 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117238Jy sigma=0.001096 ! Fit after self-cal, rms=0.117208Jy sigma=0.001096 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.79 HN 0.89 KP 1.09 ! LA 0.93 MK 1.00* NL 0.96 OV 0.99 ! PT 1.11 SC 0.99 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.82 HN 0.97 KP 1.04 ! LA 0.94 MK 1.00* NL 1.22 OV 1.02 ! PT 1.10 SC 1.07 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.92 HN 0.94 KP 0.93 ! LA 0.77 MK 1.00* NL 1.90 OV 0.95 ! PT 1.08 SC 1.10 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.84 HN 0.94 KP 0.92 ! LA 0.83 MK 1.00* NL 0.93 OV 1.00 ! PT 1.10 SC 1.01 ! ! ! Fit before self-cal, rms=0.117208Jy sigma=0.001096 ! Fit after self-cal, rms=0.087682Jy sigma=0.000801 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.227 mas, bmaj=10.14 mas, bpa=20.34 degrees ! Estimated noise=1695.13 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00764504 Jy ! Component: 100 - total flux cleaned = -0.011588 Jy ! Component: 150 - total flux cleaned = -0.0119304 Jy ! Component: 200 - total flux cleaned = -0.0121983 Jy ! Total flux subtracted in 200 components = -0.0121983 Jy ! Clean residual min=-0.006427 max=0.005379 Jy/beam ! Clean residual mean=-0.000017 rms=0.001643 Jy/beam ! Combined flux in latest and established models = 0.414753 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 39 components and 0.414753 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086965Jy sigma=0.000794 ! Fit after self-cal, rms=0.086922Jy sigma=0.000793 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086922Jy sigma=0.000793 ! Fit after self-cal, rms=0.086689Jy sigma=0.000791 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.237 mas, bmaj=10.19 mas, bpa=20.44 degrees ! Estimated noise=1694.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00449257 Jy ! Component: 100 - total flux cleaned = -0.00666311 Jy ! Component: 150 - total flux cleaned = -0.00700809 Jy ! Component: 200 - total flux cleaned = -0.00720062 Jy ! Total flux subtracted in 200 components = -0.00720062 Jy ! Clean residual min=-0.005347 max=0.004933 Jy/beam ! Clean residual mean=-0.000012 rms=0.001415 Jy/beam ! Combined flux in latest and established models = 0.407553 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 51 components and 0.407552 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086457Jy sigma=0.000788 ! Fit after self-cal, rms=0.086462Jy sigma=0.000788 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000128334 Jy ! Component: 100 - total flux cleaned = -0.00024561 Jy ! Component: 150 - total flux cleaned = -0.000385718 Jy ! Component: 200 - total flux cleaned = -0.000479109 Jy ! Total flux subtracted in 200 components = -0.000479109 Jy ! Clean residual min=-0.005345 max=0.004914 Jy/beam ! Clean residual mean=-0.000014 rms=0.001401 Jy/beam ! Combined flux in latest and established models = 0.407073 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 56 components and 0.407073 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086433Jy sigma=0.000788 ! Fit after self-cal, rms=0.086432Jy sigma=0.000788 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086432Jy sigma=0.000788 ! Fit after self-cal, rms=0.086382Jy sigma=0.000787 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.244 mas, bmaj=10.23 mas, bpa=20.51 degrees ! Estimated noise=1694.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00260573 Jy ! Component: 100 - total flux cleaned = -0.00374066 Jy ! Component: 150 - total flux cleaned = -0.0038456 Jy ! Component: 200 - total flux cleaned = -0.00396608 Jy ! Total flux subtracted in 200 components = -0.00396608 Jy ! Clean residual min=-0.004956 max=0.004757 Jy/beam ! Clean residual mean=-0.000009 rms=0.001293 Jy/beam ! Combined flux in latest and established models = 0.403107 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 68 components and 0.403107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086307Jy sigma=0.000786 ! Fit after self-cal, rms=0.086310Jy sigma=0.000786 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.97749e-07 Jy ! Component: 100 - total flux cleaned = -2.75938e-05 Jy ! Component: 150 - total flux cleaned = -5.09608e-05 Jy ! Component: 200 - total flux cleaned = -7.32928e-05 Jy ! Total flux subtracted in 200 components = -7.32928e-05 Jy ! Clean residual min=-0.004886 max=0.004694 Jy/beam ! Clean residual mean=-0.000009 rms=0.001281 Jy/beam ! Combined flux in latest and established models = 0.403034 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 76 components and 0.403034 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086300Jy sigma=0.000786 ! Fit after self-cal, rms=0.086300Jy sigma=0.000786 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086300Jy sigma=0.000786 ! Fit after self-cal, rms=0.086266Jy sigma=0.000786 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.531 mas, bmaj=10.99 mas, bpa=17.97 degrees ! Estimated noise=1779.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00199019 Jy ! Component: 100 - total flux cleaned = -0.00229011 Jy ! Component: 150 - total flux cleaned = -0.00244287 Jy ! Component: 200 - total flux cleaned = -0.00247059 Jy ! Total flux subtracted in 200 components = -0.00247059 Jy ! Clean residual min=-0.005033 max=0.004305 Jy/beam ! Clean residual mean=-0.000010 rms=0.001329 Jy/beam ! Combined flux in latest and established models = 0.400563 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 82 components and 0.400564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086233Jy sigma=0.000785 ! Fit after self-cal, rms=0.086235Jy sigma=0.000785 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.0116e-05 Jy ! Component: 100 - total flux cleaned = 2.59906e-05 Jy ! Component: 150 - total flux cleaned = 4.21653e-06 Jy ! Component: 200 - total flux cleaned = -1.77099e-05 Jy ! Total flux subtracted in 200 components = -1.77099e-05 Jy ! Clean residual min=-0.005039 max=0.004282 Jy/beam ! Clean residual mean=-0.000010 rms=0.001319 Jy/beam ! Combined flux in latest and established models = 0.400546 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 93 components and 0.400546 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086232Jy sigma=0.000785 ! Fit after self-cal, rms=0.086232Jy sigma=0.000785 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=6.248 mas, bmaj=10.25 mas, bpa=20.55 degrees ! Estimated noise=1694.17 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.248 x 10.25 at 20.55 degrees (North through East) ! Clean map min=-0.0045074 max=0.37326 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.794 mas, bmaj=9.788 mas, bpa=19.68 degrees ! Estimated noise=1963.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.289786 Jy ! Component: 100 - total flux cleaned = 0.353036 Jy ! Component: 150 - total flux cleaned = 0.371504 Jy ! Component: 200 - total flux cleaned = 0.381012 Jy ! Total flux subtracted in 200 components = 0.381012 Jy ! Clean residual min=-0.007825 max=0.006893 Jy/beam ! Clean residual mean=-0.000075 rms=0.001908 Jy/beam ! Combined flux in latest and established models = 0.381012 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.381012 Jy ! Inverting map and beam ! Estimated beam: bmin=6.248 mas, bmaj=10.25 mas, bpa=20.55 degrees ! Estimated noise=1694.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00731635 Jy ! Component: 100 - total flux cleaned = 0.0116775 Jy ! Component: 150 - total flux cleaned = 0.0138943 Jy ! Component: 200 - total flux cleaned = 0.0148398 Jy ! Total flux subtracted in 200 components = 0.0148398 Jy ! Clean residual min=-0.005215 max=0.004575 Jy/beam ! Clean residual mean=-0.000023 rms=0.001298 Jy/beam ! Combined flux in latest and established models = 0.395852 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 52 components and 0.395852 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.531 mas, bmaj=10.99 mas, bpa=17.97 degrees ! Estimated noise=1779.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00176544 Jy ! Component: 100 - total flux cleaned = 0.00230175 Jy ! Component: 150 - total flux cleaned = 0.00244426 Jy ! Component: 200 - total flux cleaned = 0.00251045 Jy ! Total flux subtracted in 200 components = 0.00251045 Jy ! Clean residual min=-0.005095 max=0.004603 Jy/beam ! Clean residual mean=-0.000022 rms=0.001359 Jy/beam ! Combined flux in latest and established models = 0.398363 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000119581 Jy ! Component: 100 - total flux cleaned = 0.000201141 Jy ! Component: 150 - total flux cleaned = 0.000276136 Jy ! Component: 200 - total flux cleaned = 0.000323781 Jy ! Total flux subtracted in 200 components = 0.000323781 Jy ! Clean residual min=-0.005072 max=0.004529 Jy/beam ! Clean residual mean=-0.000020 rms=0.001347 Jy/beam ! Combined flux in latest and established models = 0.398686 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 85 components and 0.398686 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=6.248 mas, bmaj=10.25 mas, bpa=20.55 degrees ! Estimated noise=1694.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000396495 Jy ! Component: 100 - total flux cleaned = -0.000394265 Jy ! Component: 150 - total flux cleaned = -0.000394335 Jy ! Component: 200 - total flux cleaned = -0.000395104 Jy ! Total flux subtracted in 200 components = -0.000395104 Jy ! Clean residual min=-0.004975 max=0.004526 Jy/beam ! Clean residual mean=-0.000013 rms=0.001245 Jy/beam ! Combined flux in latest and established models = 0.398291 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 94 components and 0.398291 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086286Jy sigma=0.000785 ! Fit after self-cal, rms=0.086287Jy sigma=0.000785 wmodel J0539+1433_S_2015_03_17_pus_map.mod ! Writing 94 model components to file: J0539+1433_S_2015_03_17_pus_map.mod wobs J0539+1433_S_2015_03_17_pus_uvs.fits ! Writing UV FITS file: J0539+1433_S_2015_03_17_pus_uvs.fits wwins J0539+1433_S_2015_03_17_pus_map.win ! wwins: Wrote 1 windows to J0539+1433_S_2015_03_17_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00182134 Jy ! Component: 100 - total flux cleaned = -0.00297908 Jy ! Component: 150 - total flux cleaned = -0.00326931 Jy ! Component: 200 - total flux cleaned = -0.00353882 Jy ! Component: 250 - total flux cleaned = -0.0034732 Jy ! Component: 300 - total flux cleaned = -0.00323037 Jy ! Component: 350 - total flux cleaned = -0.00305708 Jy ! Component: 400 - total flux cleaned = -0.00289064 Jy ! Component: 450 - total flux cleaned = -0.00272934 Jy ! Component: 500 - total flux cleaned = -0.00247026 Jy ! Component: 550 - total flux cleaned = -0.0022198 Jy ! Component: 600 - total flux cleaned = -0.00188539 Jy ! Component: 650 - total flux cleaned = -0.00179379 Jy ! Component: 700 - total flux cleaned = -0.00170359 Jy ! Component: 750 - total flux cleaned = -0.00166006 Jy ! Component: 800 - total flux cleaned = -0.00149033 Jy ! Component: 850 - total flux cleaned = -0.00132636 Jy ! Component: 900 - total flux cleaned = -0.00128624 Jy ! Component: 950 - total flux cleaned = -0.00109139 Jy ! Component: 1000 - total flux cleaned = -0.00105255 Jy ! Component: 1050 - total flux cleaned = -0.00101436 Jy ! Component: 1100 - total flux cleaned = -0.000940781 Jy ! Component: 1150 - total flux cleaned = -0.000976299 Jy ! Component: 1200 - total flux cleaned = -0.000940512 Jy ! Component: 1250 - total flux cleaned = -0.000906184 Jy ! Component: 1300 - total flux cleaned = -0.000974617 Jy ! Component: 1350 - total flux cleaned = -0.00104123 Jy ! Component: 1400 - total flux cleaned = -0.00107314 Jy ! Component: 1450 - total flux cleaned = -0.00104089 Jy ! Component: 1500 - total flux cleaned = -0.0010727 Jy ! Component: 1550 - total flux cleaned = -0.00113553 Jy ! Component: 1600 - total flux cleaned = -0.00116595 Jy ! Component: 1650 - total flux cleaned = -0.00116658 Jy ! Component: 1700 - total flux cleaned = -0.00122635 Jy ! Component: 1750 - total flux cleaned = -0.00119663 Jy ! Component: 1800 - total flux cleaned = -0.00119709 Jy ! Component: 1850 - total flux cleaned = -0.00119688 Jy ! Component: 1900 - total flux cleaned = -0.00116823 Jy ! Component: 1950 - total flux cleaned = -0.00114034 Jy ! Component: 2000 - total flux cleaned = -0.00122367 Jy ! Component: 2050 - total flux cleaned = -0.00114047 Jy ! Component: 2100 - total flux cleaned = -0.00108594 Jy ! Component: 2150 - total flux cleaned = -0.00105905 Jy ! Component: 2200 - total flux cleaned = -0.00108614 Jy ! Component: 2250 - total flux cleaned = -0.00108592 Jy ! Component: 2300 - total flux cleaned = -0.00103322 Jy ! Component: 2350 - total flux cleaned = -0.00103322 Jy ! Component: 2400 - total flux cleaned = -0.000981586 Jy ! Component: 2450 - total flux cleaned = -0.000981778 Jy ! Component: 2500 - total flux cleaned = -0.00100742 Jy ! Component: 2550 - total flux cleaned = -0.000956965 Jy ! Component: 2600 - total flux cleaned = -0.00100708 Jy ! Component: 2650 - total flux cleaned = -0.00103177 Jy ! Component: 2700 - total flux cleaned = -0.000982163 Jy ! Component: 2750 - total flux cleaned = -0.00103112 Jy ! Component: 2800 - total flux cleaned = -0.000982188 Jy ! Component: 2850 - total flux cleaned = -0.000982259 Jy ! Component: 2900 - total flux cleaned = -0.00103037 Jy ! Component: 2950 - total flux cleaned = -0.00100681 Jy ! Component: 3000 - total flux cleaned = -0.000959697 Jy ! Component: 3050 - total flux cleaned = -0.0010068 Jy ! Component: 3100 - total flux cleaned = -0.00098356 Jy ! Component: 3150 - total flux cleaned = -0.000983642 Jy ! Component: 3200 - total flux cleaned = -0.00102971 Jy ! Component: 3250 - total flux cleaned = -0.00102962 Jy ! Component: 3300 - total flux cleaned = -0.00100686 Jy ! Component: 3350 - total flux cleaned = -0.00102936 Jy ! Component: 3400 - total flux cleaned = -0.00102951 Jy ! Component: 3450 - total flux cleaned = -0.00105184 Jy ! Component: 3500 - total flux cleaned = -0.00107395 Jy ! Component: 3550 - total flux cleaned = -0.00105194 Jy ! Component: 3600 - total flux cleaned = -0.00107376 Jy ! Component: 3650 - total flux cleaned = -0.00103041 Jy ! Component: 3700 - total flux cleaned = -0.00107373 Jy ! Component: 3750 - total flux cleaned = -0.00107368 Jy ! Component: 3800 - total flux cleaned = -0.00107357 Jy ! Component: 3850 - total flux cleaned = -0.00107346 Jy ! Component: 3900 - total flux cleaned = -0.00100965 Jy ! Component: 3950 - total flux cleaned = -0.00100971 Jy ! Component: 4000 - total flux cleaned = -0.00103064 Jy ! Component: 4050 - total flux cleaned = -0.00107244 Jy ! Total flux subtracted in 4096 components = -0.00100992 Jy ! Clean residual min=-0.001206 max=0.001333 Jy/beam ! Clean residual mean=-0.000006 rms=0.000384 Jy/beam ! Combined flux in latest and established models = 0.397281 Jy keep ! Adding 264 model components to the UV plane model. ! The established model now contains 358 components and 0.397281 Jy ![Exited script file: muppet] wmap "J0539+1433_S_2015_03_17_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.248 x 10.25 at 20.55 degrees (North through East) ! Clean map min=-0.0037886 max=0.37371 Jy/beam ! Writing clean map to FITS file: J0539+1433_S_2015_03_17_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.373712 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000368286 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.295645 0.295645 0.591289 1.18258 2.36516 4.73031 9.46063 18.9213 37.8425 75.685 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.373 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.248 x 10.25 at 20.55 degrees (North through East) ! Clean map min=-0.0037886 max=0.37371 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0539+1433_S_2015_03_17_pus_uvs.log closed on Fri Dec 30 22:48:23 2016