! Started logfile: J0530+3723_S_2015_03_17_pus_uvs.log on Fri Dec 30 22:48:00 2016 obs J0530+3723_S_2015_03_17_pus_uva.fits ! Reading UV FITS file: J0530+3723_S_2015_03_17_pus_uva.fits ! AN table 1: 81 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.973388 visibilities/baseline/integration-bin. ! Found source: J0530+3723 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 330 lines of history. ! ! Reading 14192 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0530+3723_S_2015_03_17_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.876022Jy sigma=0.010653 ! Fit after self-cal, rms=0.864519Jy sigma=0.010513 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.056 mas, bmaj=4.662 mas, bpa=-8.985 degrees ! Estimated noise=770.892 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0991511 Jy ! Component: 100 - total flux cleaned = 0.134865 Jy ! Total flux subtracted in 100 components = 0.134865 Jy ! Clean residual min=-0.008466 max=0.026213 Jy/beam ! Clean residual mean=0.000011 rms=0.002538 Jy/beam ! Combined flux in latest and established models = 0.134865 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.134865 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089845Jy sigma=0.000971 ! Fit after self-cal, rms=0.089599Jy sigma=0.000969 ! Inverting map ! Added new window around map position (-4, -6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0250612 Jy ! Component: 100 - total flux cleaned = 0.0391905 Jy ! Total flux subtracted in 100 components = 0.0391905 Jy ! Clean residual min=-0.005072 max=0.007728 Jy/beam ! Clean residual mean=0.000005 rms=0.001584 Jy/beam ! Combined flux in latest and established models = 0.174056 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 38 components and 0.174056 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079371Jy sigma=0.000852 ! Fit after self-cal, rms=0.078925Jy sigma=0.000847 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108909 Jy ! Component: 100 - total flux cleaned = 0.018514 Jy ! Total flux subtracted in 100 components = 0.018514 Jy ! Clean residual min=-0.004582 max=0.006752 Jy/beam ! Clean residual mean=0.000002 rms=0.001266 Jy/beam ! Combined flux in latest and established models = 0.19257 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 57 components and 0.19257 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076238Jy sigma=0.000820 ! Fit after self-cal, rms=0.076153Jy sigma=0.000819 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.635 mas, bmaj=5.446 mas, bpa=-6.002 degrees ! Estimated noise=502.357 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00887481 Jy ! Component: 100 - total flux cleaned = 0.0146333 Jy ! Component: 150 - total flux cleaned = 0.0187525 Jy ! Component: 200 - total flux cleaned = 0.0218201 Jy ! Total flux subtracted in 200 components = 0.0218201 Jy ! Clean residual min=-0.004447 max=0.006640 Jy/beam ! Clean residual mean=0.000003 rms=0.001165 Jy/beam ! Combined flux in latest and established models = 0.21439 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 95 components and 0.21439 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074555Jy sigma=0.000807 ! Fit after self-cal, rms=0.074505Jy sigma=0.000806 ! Inverting map ! Added new window around map position (-10.5, -12.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00565144 Jy ! Component: 100 - total flux cleaned = 0.00861041 Jy ! Component: 150 - total flux cleaned = 0.0100861 Jy ! Component: 200 - total flux cleaned = 0.0112381 Jy ! Total flux subtracted in 200 components = 0.0112381 Jy ! Clean residual min=-0.004239 max=0.004248 Jy/beam ! Clean residual mean=0.000000 rms=0.001051 Jy/beam ! Combined flux in latest and established models = 0.225628 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 119 components and 0.225628 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073931Jy sigma=0.000801 ! Fit after self-cal, rms=0.073873Jy sigma=0.000800 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.89 HN 0.95 KP 1.09 ! LA 0.98 MK 1.04 NL 0.89 OV 1.01 ! PT 1.08 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.90 HN 1.01 KP 1.09 ! LA 0.97 MK 1.07 NL 1.02 OV 1.03 ! PT 1.04 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.93 HN 0.99 KP 0.97 ! LA 0.79 MK 1.16 NL 1.14 OV 0.95 ! PT 1.05 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.94 HN 0.94 KP 0.95 ! LA 0.85 MK 1.12 NL 0.99 OV 0.98 ! PT 1.09 SC 0.97 ! ! ! Fit before self-cal, rms=0.073873Jy sigma=0.000800 ! Fit after self-cal, rms=0.069216Jy sigma=0.000779 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.706 mas, bmaj=5.514 mas, bpa=-4.988 degrees ! Estimated noise=502.967 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00126344 Jy ! Component: 100 - total flux cleaned = 0.00113337 Jy ! Component: 150 - total flux cleaned = 0.00118987 Jy ! Component: 200 - total flux cleaned = 0.00132587 Jy ! Total flux subtracted in 200 components = 0.00132587 Jy ! Clean residual min=-0.002335 max=0.002642 Jy/beam ! Clean residual mean=0.000003 rms=0.000647 Jy/beam ! Combined flux in latest and established models = 0.226954 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 137 components and 0.226954 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069046Jy sigma=0.000777 ! Fit after self-cal, rms=0.068969Jy sigma=0.000776 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068969Jy sigma=0.000776 ! Fit after self-cal, rms=0.069465Jy sigma=0.000772 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.694 mas, bmaj=5.495 mas, bpa=-5.903 degrees ! Estimated noise=502.913 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137404 Jy ! Component: 100 - total flux cleaned = 0.00165273 Jy ! Component: 150 - total flux cleaned = 0.00172849 Jy ! Component: 200 - total flux cleaned = 0.00176137 Jy ! Total flux subtracted in 200 components = 0.00176137 Jy ! Clean residual min=-0.002071 max=0.002161 Jy/beam ! Clean residual mean=0.000001 rms=0.000469 Jy/beam ! Combined flux in latest and established models = 0.228715 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 159 components and 0.228715 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069404Jy sigma=0.000771 ! Fit after self-cal, rms=0.069422Jy sigma=0.000771 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (28, 102). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0019952 Jy ! Component: 100 - total flux cleaned = 0.00314881 Jy ! Component: 150 - total flux cleaned = 0.00381199 Jy ! Component: 200 - total flux cleaned = 0.00427887 Jy ! Total flux subtracted in 200 components = 0.00427887 Jy ! Clean residual min=-0.001947 max=0.002005 Jy/beam ! Clean residual mean=0.000002 rms=0.000426 Jy/beam ! Combined flux in latest and established models = 0.232994 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 172 components and 0.232994 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069352Jy sigma=0.000770 ! Fit after self-cal, rms=0.069347Jy sigma=0.000770 ! Inverting map ! Added new window around map position (98, 71). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00167852 Jy ! Component: 100 - total flux cleaned = 0.00218902 Jy ! Component: 150 - total flux cleaned = 0.00248642 Jy ! Component: 200 - total flux cleaned = 0.00277997 Jy ! Total flux subtracted in 200 components = 0.00277997 Jy ! Clean residual min=-0.001841 max=0.001500 Jy/beam ! Clean residual mean=0.000001 rms=0.000394 Jy/beam ! Combined flux in latest and established models = 0.235774 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 190 components and 0.235774 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069296Jy sigma=0.000769 ! Fit after self-cal, rms=0.069293Jy sigma=0.000769 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069293Jy sigma=0.000769 ! Fit after self-cal, rms=0.069341Jy sigma=0.000769 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.7 mas, bmaj=5.495 mas, bpa=-6.116 degrees ! Estimated noise=503.098 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000673603 Jy ! Component: 100 - total flux cleaned = 0.00116362 Jy ! Component: 150 - total flux cleaned = 0.00153828 Jy ! Component: 200 - total flux cleaned = 0.00182736 Jy ! Total flux subtracted in 200 components = 0.00182736 Jy ! Clean residual min=-0.001755 max=0.001461 Jy/beam ! Clean residual mean=0.000001 rms=0.000371 Jy/beam ! Combined flux in latest and established models = 0.237601 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 205 components and 0.237601 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069319Jy sigma=0.000769 ! Fit after self-cal, rms=0.069320Jy sigma=0.000769 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000294991 Jy ! Component: 100 - total flux cleaned = 0.000588942 Jy ! Component: 150 - total flux cleaned = 0.000755444 Jy ! Component: 200 - total flux cleaned = 0.000872828 Jy ! Total flux subtracted in 200 components = 0.000872828 Jy ! Clean residual min=-0.001706 max=0.001448 Jy/beam ! Clean residual mean=0.000001 rms=0.000364 Jy/beam ! Combined flux in latest and established models = 0.238474 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 223 components and 0.238474 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069307Jy sigma=0.000769 ! Fit after self-cal, rms=0.069307Jy sigma=0.000769 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069307Jy sigma=0.000769 ! Fit after self-cal, rms=0.069340Jy sigma=0.000769 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.447 mas, bmaj=9.111 mas, bpa=-2.982 degrees ! Estimated noise=637.011 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000366147 Jy ! Component: 100 - total flux cleaned = 0.000680365 Jy ! Component: 150 - total flux cleaned = 0.000916593 Jy ! Component: 200 - total flux cleaned = 0.000984079 Jy ! Total flux subtracted in 200 components = 0.000984079 Jy ! Clean residual min=-0.001422 max=0.001348 Jy/beam ! Clean residual mean=0.000002 rms=0.000427 Jy/beam ! Combined flux in latest and established models = 0.239458 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 235 components and 0.239458 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069338Jy sigma=0.000769 ! Fit after self-cal, rms=0.069336Jy sigma=0.000769 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.29658e-05 Jy ! Component: 100 - total flux cleaned = 0.000239458 Jy ! Component: 150 - total flux cleaned = 0.000394565 Jy ! Component: 200 - total flux cleaned = 0.000431429 Jy ! Total flux subtracted in 200 components = 0.000431429 Jy ! Clean residual min=-0.001385 max=0.001347 Jy/beam ! Clean residual mean=0.000002 rms=0.000423 Jy/beam ! Combined flux in latest and established models = 0.23989 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 251 components and 0.23989 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069336Jy sigma=0.000769 ! Fit after self-cal, rms=0.069334Jy sigma=0.000769 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.705 mas, bmaj=5.497 mas, bpa=-6.119 degrees ! Estimated noise=503.305 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.705 x 5.497 at -6.119 degrees (North through East) ! Clean map min=-0.0015892 max=0.123 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.118 mas, bmaj=4.708 mas, bpa=-8.835 degrees ! Estimated noise=778.901 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.100151 Jy ! Component: 100 - total flux cleaned = 0.139747 Jy ! Component: 150 - total flux cleaned = 0.161661 Jy ! Component: 200 - total flux cleaned = 0.175487 Jy ! Total flux subtracted in 200 components = 0.175487 Jy ! Clean residual min=-0.004728 max=0.007769 Jy/beam ! Clean residual mean=0.000007 rms=0.001278 Jy/beam ! Combined flux in latest and established models = 0.175487 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 36 model components to the UV plane model. ! The established model now contains 36 components and 0.175487 Jy ! Inverting map and beam ! Estimated beam: bmin=3.705 mas, bmaj=5.497 mas, bpa=-6.119 degrees ! Estimated noise=503.305 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0140457 Jy ! Component: 100 - total flux cleaned = 0.0236939 Jy ! Component: 150 - total flux cleaned = 0.0307298 Jy ! Component: 200 - total flux cleaned = 0.0359824 Jy ! Total flux subtracted in 200 components = 0.0359824 Jy ! Clean residual min=-0.002516 max=0.003145 Jy/beam ! Clean residual mean=0.000005 rms=0.000664 Jy/beam ! Combined flux in latest and established models = 0.21147 Jy ! Adding 73 model components to the UV plane model. ! The established model now contains 100 components and 0.21147 Jy ! Inverting map ! Added new window around map position (-17, -13.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0040559 Jy ! Component: 100 - total flux cleaned = 0.00726088 Jy ! Component: 150 - total flux cleaned = 0.00990168 Jy ! Component: 200 - total flux cleaned = 0.012145 Jy ! Total flux subtracted in 200 components = 0.012145 Jy ! Clean residual min=-0.002097 max=0.002016 Jy/beam ! Clean residual mean=0.000004 rms=0.000458 Jy/beam ! Combined flux in latest and established models = 0.223615 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 138 components and 0.223615 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.447 mas, bmaj=9.111 mas, bpa=-2.982 degrees ! Estimated noise=637.011 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00323027 Jy ! Component: 100 - total flux cleaned = 0.00550683 Jy ! Component: 150 - total flux cleaned = 0.00728126 Jy ! Component: 200 - total flux cleaned = 0.00871698 Jy ! Total flux subtracted in 200 components = 0.00871698 Jy ! Clean residual min=-0.001862 max=0.001766 Jy/beam ! Clean residual mean=0.000005 rms=0.000482 Jy/beam ! Combined flux in latest and established models = 0.232332 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118259 Jy ! Component: 100 - total flux cleaned = 0.00218038 Jy ! Component: 150 - total flux cleaned = 0.00296765 Jy ! Component: 200 - total flux cleaned = 0.00353325 Jy ! Total flux subtracted in 200 components = 0.00353325 Jy ! Clean residual min=-0.001626 max=0.001502 Jy/beam ! Clean residual mean=0.000005 rms=0.000433 Jy/beam ! Combined flux in latest and established models = 0.235865 Jy ! Adding 126 model components to the UV plane model. ! The established model now contains 246 components and 0.235865 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.705 mas, bmaj=5.497 mas, bpa=-6.119 degrees ! Estimated noise=503.305 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00015212 Jy ! Component: 100 - total flux cleaned = 0.000571119 Jy ! Component: 150 - total flux cleaned = 0.00100493 Jy ! Component: 200 - total flux cleaned = 0.00132981 Jy ! Total flux subtracted in 200 components = 0.00132981 Jy ! Clean residual min=-0.001661 max=0.001451 Jy/beam ! Clean residual mean=0.000002 rms=0.000353 Jy/beam ! Combined flux in latest and established models = 0.237195 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 267 components and 0.237195 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069343Jy sigma=0.000769 ! Fit after self-cal, rms=0.069332Jy sigma=0.000769 wmodel J0530+3723_S_2015_03_17_pus_map.mod ! Writing 267 model components to file: J0530+3723_S_2015_03_17_pus_map.mod wobs J0530+3723_S_2015_03_17_pus_uvs.fits ! Writing UV FITS file: J0530+3723_S_2015_03_17_pus_uvs.fits wwins J0530+3723_S_2015_03_17_pus_map.win ! wwins: Wrote 6 windows to J0530+3723_S_2015_03_17_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00047138 Jy ! Component: 100 - total flux cleaned = -0.000420796 Jy ! Component: 150 - total flux cleaned = -0.000558562 Jy ! Component: 200 - total flux cleaned = -0.000647215 Jy ! Component: 250 - total flux cleaned = -0.00077615 Jy ! Component: 300 - total flux cleaned = -0.000838762 Jy ! Component: 350 - total flux cleaned = -0.000900015 Jy ! Component: 400 - total flux cleaned = -0.000920302 Jy ! Component: 450 - total flux cleaned = -0.00103724 Jy ! Component: 500 - total flux cleaned = -0.00109471 Jy ! Component: 550 - total flux cleaned = -0.00118859 Jy ! Component: 600 - total flux cleaned = -0.00131763 Jy ! Component: 650 - total flux cleaned = -0.00140803 Jy ! Component: 700 - total flux cleaned = -0.00142602 Jy ! Component: 750 - total flux cleaned = -0.00153203 Jy ! Component: 800 - total flux cleaned = -0.00161865 Jy ! Component: 850 - total flux cleaned = -0.00168706 Jy ! Component: 900 - total flux cleaned = -0.00170397 Jy ! Component: 950 - total flux cleaned = -0.00178727 Jy ! Component: 1000 - total flux cleaned = -0.00181983 Jy ! Component: 1050 - total flux cleaned = -0.00186866 Jy ! Component: 1100 - total flux cleaned = -0.00193262 Jy ! Component: 1150 - total flux cleaned = -0.00199621 Jy ! Component: 1200 - total flux cleaned = -0.00204314 Jy ! Component: 1250 - total flux cleaned = -0.00213617 Jy ! Component: 1300 - total flux cleaned = -0.00215148 Jy ! Component: 1350 - total flux cleaned = -0.00230314 Jy ! Component: 1400 - total flux cleaned = -0.00230281 Jy ! Component: 1450 - total flux cleaned = -0.00230275 Jy ! Component: 1500 - total flux cleaned = -0.00234681 Jy ! Component: 1550 - total flux cleaned = -0.00234684 Jy ! Component: 1600 - total flux cleaned = -0.0024188 Jy ! Component: 1650 - total flux cleaned = -0.00240449 Jy ! Component: 1700 - total flux cleaned = -0.00244694 Jy ! Component: 1750 - total flux cleaned = -0.0024471 Jy ! Component: 1800 - total flux cleaned = -0.0025163 Jy ! Component: 1850 - total flux cleaned = -0.00254363 Jy ! Component: 1900 - total flux cleaned = -0.00259801 Jy ! Component: 1950 - total flux cleaned = -0.00259834 Jy ! Component: 2000 - total flux cleaned = -0.00259845 Jy ! Component: 2050 - total flux cleaned = -0.00266462 Jy ! Component: 2100 - total flux cleaned = -0.00261226 Jy ! Component: 2150 - total flux cleaned = -0.00261224 Jy ! Component: 2200 - total flux cleaned = -0.00262504 Jy ! Component: 2250 - total flux cleaned = -0.00263776 Jy ! Component: 2300 - total flux cleaned = -0.00262522 Jy ! Component: 2350 - total flux cleaned = -0.00265007 Jy ! Component: 2400 - total flux cleaned = -0.00263777 Jy ! Component: 2450 - total flux cleaned = -0.00260098 Jy ! Component: 2500 - total flux cleaned = -0.00263757 Jy ! Component: 2550 - total flux cleaned = -0.00260118 Jy ! Component: 2600 - total flux cleaned = -0.0025892 Jy ! Component: 2650 - total flux cleaned = -0.00256516 Jy ! Component: 2700 - total flux cleaned = -0.00256518 Jy ! Component: 2750 - total flux cleaned = -0.00251812 Jy ! Component: 2800 - total flux cleaned = -0.00245988 Jy ! Component: 2850 - total flux cleaned = -0.00247152 Jy ! Component: 2900 - total flux cleaned = -0.00243721 Jy ! Component: 2950 - total flux cleaned = -0.00240305 Jy ! Component: 3000 - total flux cleaned = -0.00241429 Jy ! Component: 3050 - total flux cleaned = -0.0023471 Jy ! Component: 3100 - total flux cleaned = -0.00242484 Jy ! Component: 3150 - total flux cleaned = -0.00234755 Jy ! Component: 3200 - total flux cleaned = -0.00230373 Jy ! Component: 3250 - total flux cleaned = -0.00230387 Jy ! Component: 3300 - total flux cleaned = -0.00226069 Jy ! Component: 3350 - total flux cleaned = -0.00225003 Jy ! Component: 3400 - total flux cleaned = -0.0022286 Jy ! Component: 3450 - total flux cleaned = -0.00220747 Jy ! Component: 3500 - total flux cleaned = -0.00221797 Jy ! Component: 3550 - total flux cleaned = -0.0022077 Jy ! Component: 3600 - total flux cleaned = -0.00219729 Jy ! Component: 3650 - total flux cleaned = -0.00220754 Jy ! Component: 3700 - total flux cleaned = -0.00222795 Jy ! Component: 3750 - total flux cleaned = -0.00220767 Jy ! Component: 3800 - total flux cleaned = -0.00222777 Jy ! Component: 3850 - total flux cleaned = -0.0022478 Jy ! Component: 3900 - total flux cleaned = -0.00222779 Jy ! Component: 3950 - total flux cleaned = -0.00223758 Jy ! Component: 4000 - total flux cleaned = -0.00222769 Jy ! Component: 4050 - total flux cleaned = -0.00222757 Jy ! Total flux subtracted in 4096 components = -0.0022665 Jy ! Clean residual min=-0.000563 max=0.000605 Jy/beam ! Clean residual mean=0.000001 rms=0.000179 Jy/beam ! Combined flux in latest and established models = 0.234928 Jy keep ! Adding 304 model components to the UV plane model. ! The established model now contains 571 components and 0.234928 Jy ![Exited script file: muppet] wmap "J0530+3723_S_2015_03_17_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.705 x 5.497 at -6.119 degrees (North through East) ! Clean map min=-0.0012941 max=0.12372 Jy/beam ! Writing clean map to FITS file: J0530+3723_S_2015_03_17_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.123718 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00017815 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.431989 0.431989 0.863978 1.72796 3.45591 6.91183 13.8237 27.6473 55.2946 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.123 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.705 x 5.497 at -6.119 degrees (North through East) ! Clean map min=-0.0012941 max=0.12372 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0530+3723_S_2015_03_17_pus_uvs.log closed on Fri Dec 30 22:48:06 2016