! Started logfile: J0527-1002_X_2015_03_17_pus_uvs.log on Sat Dec 31 19:00:56 2016 obs J0527-1002_X_2015_03_17_pus_uva.fits ! Reading UV FITS file: J0527-1002_X_2015_03_17_pus_uva.fits ! AN table 1: 124 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.875806 visibilities/baseline/integration-bin. ! Found source: J0527-1002 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 58644 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J0527-1002_X_2015_03_17_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 81 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 81 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 81 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 81 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 81 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 81 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 81 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 81 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 81 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 81 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 81 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 143 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.997780Jy sigma=0.011621 ! Fit after self-cal, rms=0.963847Jy sigma=0.011229 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7172 mas, bmaj=1.888 mas, bpa=3.874 degrees ! Estimated noise=402.719 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0293751 Jy ! Component: 100 - total flux cleaned = 0.0357846 Jy ! Total flux subtracted in 100 components = 0.0357846 Jy ! Clean residual min=-0.001604 max=0.001856 Jy/beam ! Clean residual mean=0.000002 rms=0.000425 Jy/beam ! Combined flux in latest and established models = 0.0357846 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0357846 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069618Jy sigma=0.000770 ! Fit after self-cal, rms=0.068364Jy sigma=0.000755 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00346214 Jy ! Component: 100 - total flux cleaned = 0.0045137 Jy ! Total flux subtracted in 100 components = 0.0045137 Jy ! Clean residual min=-0.001500 max=0.001499 Jy/beam ! Clean residual mean=0.000002 rms=0.000374 Jy/beam ! Combined flux in latest and established models = 0.0402983 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0402983 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068163Jy sigma=0.000753 ! Fit after self-cal, rms=0.068157Jy sigma=0.000753 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8968 mas, bmaj=2.282 mas, bpa=4.458 degrees ! Estimated noise=254.957 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000879902 Jy ! Component: 100 - total flux cleaned = 0.00111833 Jy ! Component: 150 - total flux cleaned = 0.00118137 Jy ! Component: 200 - total flux cleaned = 0.00119215 Jy ! Total flux subtracted in 200 components = 0.00119215 Jy ! Clean residual min=-0.001335 max=0.001169 Jy/beam ! Clean residual mean=0.000000 rms=0.000325 Jy/beam ! Combined flux in latest and established models = 0.0414904 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 18 components and 0.0414904 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068140Jy sigma=0.000753 ! Fit after self-cal, rms=0.068139Jy sigma=0.000753 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.06 HN 1.04 KP 0.94 ! LA 1.04 MK 1.05 NL 1.10 OV 1.05 ! PT 1.09 SC 1.08 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.07 HN 1.10 KP 0.96 ! LA 1.01 MK 1.06 NL 1.03 OV 1.05 ! PT 1.00 SC 1.06 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.16 HN 1.11 KP 0.93 ! LA 1.05 MK 1.03 NL 1.00 OV 1.01 ! PT 1.02 SC 1.00 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.09 HN 0.99 KP 0.80 ! LA 1.06 MK 1.08 NL 1.08 OV 1.01 ! PT 0.99 SC 1.05 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.10 HN 0.97 KP 0.81 ! LA 1.00 MK 1.07 NL 1.13 OV 1.05 ! PT 0.98 SC 1.04 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.07 HN 0.97 KP 0.85 ! LA 1.03 MK 0.93 NL 1.08 OV 1.05 ! PT 0.98 SC 1.00 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.02 HN 1.14 KP 0.81 ! LA 1.13 MK 1.01 NL 0.99 OV 1.02 ! PT 0.99 SC 1.00 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.05 HN 1.03 KP 0.83 ! LA 1.01 MK 1.10 NL 1.03 OV 1.06 ! PT 1.04 SC 0.99 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.08 HN 1.00 KP 0.84 ! LA 1.07 MK 0.91 NL 1.02 OV 1.09 ! PT 0.95 SC 1.02 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.02 HN 0.92 KP 0.81 ! LA 1.05 MK 0.92 NL 1.02 OV 1.05 ! PT 1.00 SC 0.99 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.02 HN 0.92 KP 0.84 ! LA 0.98 MK 0.94 NL 1.06 OV 1.10 ! PT 0.97 SC 0.94 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.99 HN 0.85 KP 0.89 ! LA 0.99 MK 1.00* NL 1.01 OV 1.01 ! PT 0.92 SC 0.97 ! ! ! Fit before self-cal, rms=0.068139Jy sigma=0.000753 ! Fit after self-cal, rms=0.066378Jy sigma=0.000751 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8992 mas, bmaj=2.281 mas, bpa=4.596 degrees ! Estimated noise=254.491 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.55367e-05 Jy ! Component: 100 - total flux cleaned = 7.53397e-05 Jy ! Component: 150 - total flux cleaned = 8.14592e-05 Jy ! Component: 200 - total flux cleaned = 8.69824e-05 Jy ! Total flux subtracted in 200 components = 8.69824e-05 Jy ! Clean residual min=-0.000755 max=0.000790 Jy/beam ! Clean residual mean=0.000003 rms=0.000205 Jy/beam ! Combined flux in latest and established models = 0.0415774 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 27 components and 0.0415774 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066377Jy sigma=0.000751 ! Fit after self-cal, rms=0.066328Jy sigma=0.000751 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066328Jy sigma=0.000751 ! Fit after self-cal, rms=0.066326Jy sigma=0.000750 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8985 mas, bmaj=2.279 mas, bpa=4.527 degrees ! Estimated noise=254.173 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.9719e-05 Jy ! Component: 100 - total flux cleaned = 9.77316e-05 Jy ! Component: 150 - total flux cleaned = 0.000137517 Jy ! Component: 200 - total flux cleaned = 0.000137435 Jy ! Total flux subtracted in 200 components = 0.000137435 Jy ! Clean residual min=-0.000714 max=0.000738 Jy/beam ! Clean residual mean=0.000001 rms=0.000188 Jy/beam ! Combined flux in latest and established models = 0.0417149 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 27 components and 0.0417149 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066324Jy sigma=0.000750 ! Fit after self-cal, rms=0.066326Jy sigma=0.000750 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.80019e-06 Jy ! Component: 100 - total flux cleaned = 1.02627e-05 Jy ! Component: 150 - total flux cleaned = 2.15099e-05 Jy ! Component: 200 - total flux cleaned = 1.66131e-05 Jy ! Total flux subtracted in 200 components = 1.66131e-05 Jy ! Clean residual min=-0.000737 max=0.000744 Jy/beam ! Clean residual mean=0.000001 rms=0.000189 Jy/beam ! Combined flux in latest and established models = 0.0417315 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 27 components and 0.0417315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066325Jy sigma=0.000750 ! Fit after self-cal, rms=0.066325Jy sigma=0.000750 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066325Jy sigma=0.000750 ! Fit after self-cal, rms=0.066594Jy sigma=0.000750 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8972 mas, bmaj=2.275 mas, bpa=4.42 degrees ! Estimated noise=254.791 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000117644 Jy ! Component: 100 - total flux cleaned = 0.000159063 Jy ! Component: 150 - total flux cleaned = 0.000192797 Jy ! Component: 200 - total flux cleaned = 0.00019773 Jy ! Total flux subtracted in 200 components = 0.00019773 Jy ! Clean residual min=-0.000727 max=0.000738 Jy/beam ! Clean residual mean=0.000000 rms=0.000187 Jy/beam ! Combined flux in latest and established models = 0.0419292 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 27 components and 0.0419292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066592Jy sigma=0.000750 ! Fit after self-cal, rms=0.066599Jy sigma=0.000750 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.65811e-06 Jy ! Component: 100 - total flux cleaned = 6.90586e-06 Jy ! Component: 150 - total flux cleaned = 1.62081e-05 Jy ! Component: 200 - total flux cleaned = 2.03034e-05 Jy ! Total flux subtracted in 200 components = 2.03034e-05 Jy ! Clean residual min=-0.000731 max=0.000737 Jy/beam ! Clean residual mean=0.000000 rms=0.000186 Jy/beam ! Combined flux in latest and established models = 0.0419495 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 27 components and 0.0419495 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066598Jy sigma=0.000750 ! Fit after self-cal, rms=0.066598Jy sigma=0.000750 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066598Jy sigma=0.000750 ! Fit after self-cal, rms=0.066776Jy sigma=0.000750 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.168 mas, bmaj=3.903 mas, bpa=1.977 degrees ! Estimated noise=318.733 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000311179 Jy ! Component: 100 - total flux cleaned = 0.000325662 Jy ! Component: 150 - total flux cleaned = 0.00034275 Jy ! Component: 200 - total flux cleaned = 0.000357595 Jy ! Total flux subtracted in 200 components = 0.000357595 Jy ! Clean residual min=-0.000803 max=0.000804 Jy/beam ! Clean residual mean=0.000001 rms=0.000222 Jy/beam ! Combined flux in latest and established models = 0.0423071 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 30 components and 0.0423071 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066775Jy sigma=0.000750 ! Fit after self-cal, rms=0.066778Jy sigma=0.000750 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.13209e-05 Jy ! Component: 100 - total flux cleaned = 8.20052e-05 Jy ! Component: 150 - total flux cleaned = 8.52973e-05 Jy ! Component: 200 - total flux cleaned = 9.10895e-05 Jy ! Total flux subtracted in 200 components = 9.10895e-05 Jy ! Clean residual min=-0.000793 max=0.000804 Jy/beam ! Clean residual mean=0.000001 rms=0.000221 Jy/beam ! Combined flux in latest and established models = 0.0423982 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 33 components and 0.0423982 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066778Jy sigma=0.000750 ! Fit after self-cal, rms=0.066778Jy sigma=0.000750 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.8959 mas, bmaj=2.272 mas, bpa=4.313 degrees ! Estimated noise=255.337 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8959 x 2.272 at 4.313 degrees (North through East) ! Clean map min=-0.0006783 max=0.040528 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.714 mas, bmaj=1.884 mas, bpa=3.66 degrees ! Estimated noise=404.298 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.031419 Jy ! Component: 100 - total flux cleaned = 0.038335 Jy ! Component: 150 - total flux cleaned = 0.0403049 Jy ! Component: 200 - total flux cleaned = 0.0412806 Jy ! Total flux subtracted in 200 components = 0.0412806 Jy ! Clean residual min=-0.001184 max=0.001068 Jy/beam ! Clean residual mean=0.000000 rms=0.000297 Jy/beam ! Combined flux in latest and established models = 0.0412806 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0412806 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8959 mas, bmaj=2.272 mas, bpa=4.313 degrees ! Estimated noise=255.337 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000687791 Jy ! Component: 100 - total flux cleaned = 0.00080806 Jy ! Component: 150 - total flux cleaned = 0.000900994 Jy ! Component: 200 - total flux cleaned = 0.000952735 Jy ! Total flux subtracted in 200 components = 0.000952735 Jy ! Clean residual min=-0.000765 max=0.000748 Jy/beam ! Clean residual mean=0.000000 rms=0.000193 Jy/beam ! Combined flux in latest and established models = 0.0422333 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 25 components and 0.0422333 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.168 mas, bmaj=3.903 mas, bpa=1.977 degrees ! Estimated noise=318.733 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000218418 Jy ! Component: 100 - total flux cleaned = 0.000219712 Jy ! Component: 150 - total flux cleaned = 0.000230553 Jy ! Component: 200 - total flux cleaned = 0.000250054 Jy ! Total flux subtracted in 200 components = 0.000250054 Jy ! Clean residual min=-0.000786 max=0.000813 Jy/beam ! Clean residual mean=0.000001 rms=0.000222 Jy/beam ! Combined flux in latest and established models = 0.0424834 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.16649e-06 Jy ! Component: 100 - total flux cleaned = 1.35184e-05 Jy ! Component: 150 - total flux cleaned = 1.74983e-05 Jy ! Component: 200 - total flux cleaned = 2.14291e-05 Jy ! Total flux subtracted in 200 components = 2.14291e-05 Jy ! Clean residual min=-0.000782 max=0.000810 Jy/beam ! Clean residual mean=0.000001 rms=0.000221 Jy/beam ! Combined flux in latest and established models = 0.0425048 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 29 components and 0.0425048 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8959 mas, bmaj=2.272 mas, bpa=4.313 degrees ! Estimated noise=255.337 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.74348e-05 Jy ! Component: 100 - total flux cleaned = -6.54635e-05 Jy ! Component: 150 - total flux cleaned = -8.03483e-05 Jy ! Component: 200 - total flux cleaned = -9.35046e-05 Jy ! Total flux subtracted in 200 components = -9.35046e-05 Jy ! Clean residual min=-0.000746 max=0.000758 Jy/beam ! Clean residual mean=0.000000 rms=0.000188 Jy/beam ! Combined flux in latest and established models = 0.0424113 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 33 components and 0.0424113 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066779Jy sigma=0.000750 ! Fit after self-cal, rms=0.066780Jy sigma=0.000750 wmodel J0527-1002_X_2015_03_17_pus_map.mod ! Writing 33 model components to file: J0527-1002_X_2015_03_17_pus_map.mod wobs J0527-1002_X_2015_03_17_pus_uvs.fits ! Writing UV FITS file: J0527-1002_X_2015_03_17_pus_uvs.fits wwins J0527-1002_X_2015_03_17_pus_map.win ! wwins: Wrote 1 windows to J0527-1002_X_2015_03_17_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -9.76797e-06 Jy ! Component: 100 - total flux cleaned = -7.07576e-05 Jy ! Component: 150 - total flux cleaned = -0.000117978 Jy ! Component: 200 - total flux cleaned = -0.000184132 Jy ! Component: 250 - total flux cleaned = -0.00020498 Jy ! Component: 300 - total flux cleaned = -0.000185046 Jy ! Component: 350 - total flux cleaned = -0.000194659 Jy ! Component: 400 - total flux cleaned = -0.000194493 Jy ! Component: 450 - total flux cleaned = -0.000212479 Jy ! Component: 500 - total flux cleaned = -0.00020368 Jy ! Component: 550 - total flux cleaned = -0.000186572 Jy ! Component: 600 - total flux cleaned = -0.000195061 Jy ! Component: 650 - total flux cleaned = -0.000211417 Jy ! Component: 700 - total flux cleaned = -0.000235411 Jy ! Component: 750 - total flux cleaned = -0.000250805 Jy ! Component: 800 - total flux cleaned = -0.000227533 Jy ! Component: 850 - total flux cleaned = -0.000219954 Jy ! Component: 900 - total flux cleaned = -0.000227354 Jy ! Component: 950 - total flux cleaned = -0.000234674 Jy ! Component: 1000 - total flux cleaned = -0.000212896 Jy ! Component: 1050 - total flux cleaned = -0.000227017 Jy ! Component: 1100 - total flux cleaned = -0.000206038 Jy ! Component: 1150 - total flux cleaned = -0.000212982 Jy ! Component: 1200 - total flux cleaned = -0.000206162 Jy ! Component: 1250 - total flux cleaned = -0.000192833 Jy ! Component: 1300 - total flux cleaned = -0.000199509 Jy ! Component: 1350 - total flux cleaned = -0.000206021 Jy ! Component: 1400 - total flux cleaned = -0.000193251 Jy ! Component: 1450 - total flux cleaned = -0.000218599 Jy ! Component: 1500 - total flux cleaned = -0.000231035 Jy ! Component: 1550 - total flux cleaned = -0.000243258 Jy ! Component: 1600 - total flux cleaned = -0.000243177 Jy ! Component: 1650 - total flux cleaned = -0.000267286 Jy ! Component: 1700 - total flux cleaned = -0.000279097 Jy ! Component: 1750 - total flux cleaned = -0.000284866 Jy ! Component: 1800 - total flux cleaned = -0.000290702 Jy ! Component: 1850 - total flux cleaned = -0.000302317 Jy ! Component: 1900 - total flux cleaned = -0.000325147 Jy ! Component: 1950 - total flux cleaned = -0.000342085 Jy ! Component: 2000 - total flux cleaned = -0.000347661 Jy ! Total flux subtracted in 2048 components = -0.000369777 Jy ! Clean residual min=-0.000319 max=0.000277 Jy/beam ! Clean residual mean=-0.000001 rms=0.000104 Jy/beam ! Combined flux in latest and established models = 0.0420415 Jy keep ! Adding 139 model components to the UV plane model. ! The established model now contains 172 components and 0.0420415 Jy ![Exited script file: muppet] wmap "J0527-1002_X_2015_03_17_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8959 x 2.272 at 4.313 degrees (North through East) ! Clean map min=-0.00064538 max=0.040318 Jy/beam ! Writing clean map to FITS file: J0527-1002_X_2015_03_17_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0403185 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000103748 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.771963 0.771963 1.54393 3.08785 6.17571 12.3514 24.7028 49.4056 98.8113 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.04 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8959 x 2.272 at 4.313 degrees (North through East) ! Clean map min=-0.00064538 max=0.040318 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0527-1002_X_2015_03_17_pus_uvs.log closed on Sat Dec 31 19:00:59 2016