! Started logfile: J0443+3441_S_2015_03_17_pus_uvs.log on Fri Dec 30 22:46:26 2016 obs J0443+3441_S_2015_03_17_pus_uva.fits ! Reading UV FITS file: J0443+3441_S_2015_03_17_pus_uva.fits ! AN table 1: 13 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.688889 visibilities/baseline/integration-bin. ! Found source: J0443+3441 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 330 lines of history. ! ! Reading 1612 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0443+3441_S_2015_03_17_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.421789Jy sigma=0.004575 ! Fit after self-cal, rms=0.407353Jy sigma=0.004430 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.487 mas, bmaj=8.265 mas, bpa=-57.61 degrees ! Estimated noise=2101.3 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.467362 Jy ! Component: 100 - total flux cleaned = 0.57197 Jy ! Total flux subtracted in 100 components = 0.57197 Jy ! Clean residual min=-0.029430 max=0.037226 Jy/beam ! Clean residual mean=0.000206 rms=0.008413 Jy/beam ! Combined flux in latest and established models = 0.57197 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.57197 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139524Jy sigma=0.001279 ! Fit after self-cal, rms=0.139511Jy sigma=0.001279 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.151 mas, bmaj=8.617 mas, bpa=-59.96 degrees ! Estimated noise=1713.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0457505 Jy ! Component: 100 - total flux cleaned = 0.0678938 Jy ! Component: 150 - total flux cleaned = 0.0810295 Jy ! Component: 200 - total flux cleaned = 0.0896801 Jy ! Total flux subtracted in 200 components = 0.0896801 Jy ! Clean residual min=-0.027030 max=0.024061 Jy/beam ! Clean residual mean=0.000135 rms=0.005969 Jy/beam ! Combined flux in latest and established models = 0.66165 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 48 components and 0.66165 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121148Jy sigma=0.001139 ! Fit after self-cal, rms=0.121120Jy sigma=0.001139 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.89 HN 0.98 KP 1.08 ! LA 0.96 MK 1.00* NL 0.88 OV 0.99 ! PT 1.11 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.93 HN 1.02 KP 1.04 ! LA 0.94 MK 1.00* NL 1.02 OV 1.02 ! PT 1.12 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.91 HN 1.02 KP 0.96 ! LA 0.75 MK 1.00* NL 1.29 OV 0.95 ! PT 1.10 SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 0.97 HN 1.00 KP 0.92 ! LA 0.82 MK 1.00* NL 1.00 OV 1.02 ! PT 1.13 SC 0.97 ! ! ! Fit before self-cal, rms=0.121120Jy sigma=0.001139 ! Fit after self-cal, rms=0.086474Jy sigma=0.000817 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.172 mas, bmaj=8.656 mas, bpa=-59.99 degrees ! Estimated noise=1704.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00114743 Jy ! Component: 100 - total flux cleaned = -0.00133803 Jy ! Component: 150 - total flux cleaned = -0.00128826 Jy ! Component: 200 - total flux cleaned = -0.00125381 Jy ! Total flux subtracted in 200 components = -0.00125381 Jy ! Clean residual min=-0.004679 max=0.004387 Jy/beam ! Clean residual mean=0.000004 rms=0.001237 Jy/beam ! Combined flux in latest and established models = 0.660396 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 62 components and 0.660396 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086401Jy sigma=0.000816 ! Fit after self-cal, rms=0.086386Jy sigma=0.000816 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086386Jy sigma=0.000816 ! Fit after self-cal, rms=0.086228Jy sigma=0.000816 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.174 mas, bmaj=8.655 mas, bpa=-59.81 degrees ! Estimated noise=1704.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000511701 Jy ! Component: 100 - total flux cleaned = -0.000474523 Jy ! Component: 150 - total flux cleaned = -0.000444895 Jy ! Component: 200 - total flux cleaned = -0.000470485 Jy ! Total flux subtracted in 200 components = -0.000470485 Jy ! Clean residual min=-0.004717 max=0.004262 Jy/beam ! Clean residual mean=0.000004 rms=0.001209 Jy/beam ! Combined flux in latest and established models = 0.659925 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 71 components and 0.659925 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086205Jy sigma=0.000816 ! Fit after self-cal, rms=0.086204Jy sigma=0.000816 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.30279e-06 Jy ! Component: 100 - total flux cleaned = 4.96317e-06 Jy ! Component: 150 - total flux cleaned = 5.00049e-06 Jy ! Component: 200 - total flux cleaned = 4.40624e-06 Jy ! Total flux subtracted in 200 components = 4.40624e-06 Jy ! Clean residual min=-0.004687 max=0.004211 Jy/beam ! Clean residual mean=0.000004 rms=0.001204 Jy/beam ! Combined flux in latest and established models = 0.65993 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 81 components and 0.65993 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086193Jy sigma=0.000815 ! Fit after self-cal, rms=0.086193Jy sigma=0.000815 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086193Jy sigma=0.000815 ! Fit after self-cal, rms=0.086112Jy sigma=0.000815 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.175 mas, bmaj=8.653 mas, bpa=-59.68 degrees ! Estimated noise=1704.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000158678 Jy ! Component: 100 - total flux cleaned = -7.07727e-05 Jy ! Component: 150 - total flux cleaned = -5.0551e-05 Jy ! Component: 200 - total flux cleaned = -6.99142e-05 Jy ! Total flux subtracted in 200 components = -6.99142e-05 Jy ! Clean residual min=-0.004711 max=0.004101 Jy/beam ! Clean residual mean=0.000004 rms=0.001194 Jy/beam ! Combined flux in latest and established models = 0.65986 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 87 components and 0.65986 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086102Jy sigma=0.000815 ! Fit after self-cal, rms=0.086102Jy sigma=0.000815 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.51133e-06 Jy ! Component: 100 - total flux cleaned = -9.12223e-06 Jy ! Component: 150 - total flux cleaned = -9.01494e-06 Jy ! Component: 200 - total flux cleaned = -2.62695e-05 Jy ! Total flux subtracted in 200 components = -2.62695e-05 Jy ! Clean residual min=-0.004706 max=0.004072 Jy/beam ! Clean residual mean=0.000004 rms=0.001192 Jy/beam ! Combined flux in latest and established models = 0.659834 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 90 components and 0.659834 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086094Jy sigma=0.000815 ! Fit after self-cal, rms=0.086095Jy sigma=0.000815 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086095Jy sigma=0.000815 ! Fit after self-cal, rms=0.086058Jy sigma=0.000815 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.711 mas, bmaj=9.826 mas, bpa=-62.4 degrees ! Estimated noise=1791.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.73238e-06 Jy ! Component: 100 - total flux cleaned = 2.63236e-05 Jy ! Component: 150 - total flux cleaned = 3.85888e-05 Jy ! Component: 200 - total flux cleaned = 7.4934e-05 Jy ! Total flux subtracted in 200 components = 7.4934e-05 Jy ! Clean residual min=-0.004676 max=0.003603 Jy/beam ! Clean residual mean=0.000007 rms=0.001144 Jy/beam ! Combined flux in latest and established models = 0.659909 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 100 components and 0.659909 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086055Jy sigma=0.000815 ! Fit after self-cal, rms=0.086054Jy sigma=0.000815 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.04418e-05 Jy ! Component: 100 - total flux cleaned = 6.28006e-05 Jy ! Component: 150 - total flux cleaned = 9.40337e-05 Jy ! Component: 200 - total flux cleaned = 0.000113035 Jy ! Total flux subtracted in 200 components = 0.000113035 Jy ! Clean residual min=-0.004659 max=0.003603 Jy/beam ! Clean residual mean=0.000007 rms=0.001142 Jy/beam ! Combined flux in latest and established models = 0.660022 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 103 components and 0.660022 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086052Jy sigma=0.000815 ! Fit after self-cal, rms=0.086052Jy sigma=0.000815 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=7.176 mas, bmaj=8.652 mas, bpa=-59.59 degrees ! Estimated noise=1704.43 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 7.176 x 8.652 at -59.59 degrees (North through East) ! Clean map min=-0.004693 max=0.60082 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086052Jy sigma=0.000815 ! Fit after self-cal, rms=0.072897Jy sigma=0.000696 ! Inverting map and beam ! Estimated beam: bmin=7.186 mas, bmaj=8.647 mas, bpa=-59.78 degrees ! Estimated noise=1704.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000278594 Jy ! Component: 100 - total flux cleaned = 0.000342641 Jy ! Component: 150 - total flux cleaned = 0.000385326 Jy ! Component: 200 - total flux cleaned = 0.000416474 Jy ! Total flux subtracted in 200 components = 0.000416474 Jy ! Clean residual min=-0.004552 max=0.003842 Jy/beam ! Clean residual mean=0.000007 rms=0.001105 Jy/beam ! Combined flux in latest and established models = 0.660438 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 115 components and 0.660438 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072878Jy sigma=0.000696 ! Fit after self-cal, rms=0.072879Jy sigma=0.000696 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.87511e-06 Jy ! Component: 100 - total flux cleaned = 1.3904e-06 Jy ! Component: 150 - total flux cleaned = 1.4039e-05 Jy ! Component: 200 - total flux cleaned = 1.40714e-05 Jy ! Total flux subtracted in 200 components = 1.40714e-05 Jy ! Clean residual min=-0.004566 max=0.003795 Jy/beam ! Clean residual mean=0.000007 rms=0.001103 Jy/beam ! Combined flux in latest and established models = 0.660452 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 126 components and 0.660452 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072874Jy sigma=0.000696 ! Fit after self-cal, rms=0.072874Jy sigma=0.000696 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072874Jy sigma=0.000696 ! Fit after self-cal, rms=0.072884Jy sigma=0.000696 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.519 mas, bmaj=8.316 mas, bpa=-58.42 degrees ! Estimated noise=2090.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.464928 Jy ! Component: 100 - total flux cleaned = 0.568378 Jy ! Component: 150 - total flux cleaned = 0.606748 Jy ! Component: 200 - total flux cleaned = 0.625859 Jy ! Total flux subtracted in 200 components = 0.625859 Jy ! Clean residual min=-0.006773 max=0.009330 Jy/beam ! Clean residual mean=0.000027 rms=0.002234 Jy/beam ! Combined flux in latest and established models = 0.625858 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.625858 Jy ! Inverting map and beam ! Estimated beam: bmin=7.19 mas, bmaj=8.643 mas, bpa=-59.69 degrees ! Estimated noise=1704.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0127937 Jy ! Component: 100 - total flux cleaned = 0.019942 Jy ! Component: 150 - total flux cleaned = 0.0245044 Jy ! Component: 200 - total flux cleaned = 0.0275733 Jy ! Total flux subtracted in 200 components = 0.0275733 Jy ! Clean residual min=-0.004745 max=0.003829 Jy/beam ! Clean residual mean=0.000013 rms=0.001161 Jy/beam ! Combined flux in latest and established models = 0.653432 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 73 components and 0.653432 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.724 mas, bmaj=9.812 mas, bpa=-62.53 degrees ! Estimated noise=1791.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00271993 Jy ! Component: 100 - total flux cleaned = 0.0043966 Jy ! Component: 150 - total flux cleaned = 0.00548421 Jy ! Component: 200 - total flux cleaned = 0.00619928 Jy ! Total flux subtracted in 200 components = 0.00619928 Jy ! Clean residual min=-0.004232 max=0.003859 Jy/beam ! Clean residual mean=0.000012 rms=0.001061 Jy/beam ! Combined flux in latest and established models = 0.659631 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000186632 Jy ! Component: 100 - total flux cleaned = 0.000337338 Jy ! Component: 150 - total flux cleaned = 0.000434607 Jy ! Component: 200 - total flux cleaned = 0.000517143 Jy ! Total flux subtracted in 200 components = 0.000517143 Jy ! Clean residual min=-0.004227 max=0.003882 Jy/beam ! Clean residual mean=0.000011 rms=0.001058 Jy/beam ! Combined flux in latest and established models = 0.660148 Jy ! Adding 61 model components to the UV plane model. ! The established model now contains 125 components and 0.660148 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=7.19 mas, bmaj=8.643 mas, bpa=-59.69 degrees ! Estimated noise=1704.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.1714e-05 Jy ! Component: 100 - total flux cleaned = -0.000127554 Jy ! Component: 150 - total flux cleaned = -0.000144644 Jy ! Component: 200 - total flux cleaned = -0.00017423 Jy ! Total flux subtracted in 200 components = -0.00017423 Jy ! Clean residual min=-0.004548 max=0.003930 Jy/beam ! Clean residual mean=0.000007 rms=0.001095 Jy/beam ! Combined flux in latest and established models = 0.659974 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 135 components and 0.659974 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072883Jy sigma=0.000696 ! Fit after self-cal, rms=0.072884Jy sigma=0.000696 wmodel J0443+3441_S_2015_03_17_pus_map.mod ! Writing 135 model components to file: J0443+3441_S_2015_03_17_pus_map.mod wobs J0443+3441_S_2015_03_17_pus_uvs.fits ! Writing UV FITS file: J0443+3441_S_2015_03_17_pus_uvs.fits wwins J0443+3441_S_2015_03_17_pus_map.win ! wwins: Wrote 1 windows to J0443+3441_S_2015_03_17_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00135649 Jy ! Component: 100 - total flux cleaned = -0.00149474 Jy ! Component: 150 - total flux cleaned = -0.00118616 Jy ! Component: 200 - total flux cleaned = -0.000951134 Jy ! Component: 250 - total flux cleaned = -0.000563296 Jy ! Component: 300 - total flux cleaned = -0.000511715 Jy ! Component: 350 - total flux cleaned = -0.000459235 Jy ! Component: 400 - total flux cleaned = -0.000310327 Jy ! Component: 450 - total flux cleaned = -7.37453e-05 Jy ! Component: 500 - total flux cleaned = 0.000245745 Jy ! Component: 550 - total flux cleaned = 0.000510953 Jy ! Component: 600 - total flux cleaned = 0.000857086 Jy ! Component: 650 - total flux cleaned = 0.00123616 Jy ! Component: 700 - total flux cleaned = 0.00156446 Jy ! Component: 750 - total flux cleaned = 0.001884 Jy ! Component: 800 - total flux cleaned = 0.00203997 Jy ! Component: 850 - total flux cleaned = 0.00238303 Jy ! Component: 900 - total flux cleaned = 0.00256824 Jy ! Component: 950 - total flux cleaned = 0.00278613 Jy ! Component: 1000 - total flux cleaned = 0.00299902 Jy ! Component: 1050 - total flux cleaned = 0.00317279 Jy ! Component: 1100 - total flux cleaned = 0.00337708 Jy ! Component: 1150 - total flux cleaned = 0.00361047 Jy ! Component: 1200 - total flux cleaned = 0.00367575 Jy ! Component: 1250 - total flux cleaned = 0.00377203 Jy ! Component: 1300 - total flux cleaned = 0.0038035 Jy ! Component: 1350 - total flux cleaned = 0.00386539 Jy ! Component: 1400 - total flux cleaned = 0.00395635 Jy ! Component: 1450 - total flux cleaned = 0.00407544 Jy ! Component: 1500 - total flux cleaned = 0.00407464 Jy ! Component: 1550 - total flux cleaned = 0.00407484 Jy ! Component: 1600 - total flux cleaned = 0.00404675 Jy ! Component: 1650 - total flux cleaned = 0.00404636 Jy ! Component: 1700 - total flux cleaned = 0.0040186 Jy ! Component: 1750 - total flux cleaned = 0.00401876 Jy ! Component: 1800 - total flux cleaned = 0.00399171 Jy ! Component: 1850 - total flux cleaned = 0.00404403 Jy ! Component: 1900 - total flux cleaned = 0.00391338 Jy ! Component: 1950 - total flux cleaned = 0.00381084 Jy ! Component: 2000 - total flux cleaned = 0.00378586 Jy ! Component: 2050 - total flux cleaned = 0.00373571 Jy ! Component: 2100 - total flux cleaned = 0.00361205 Jy ! Component: 2150 - total flux cleaned = 0.0035637 Jy ! Component: 2200 - total flux cleaned = 0.00351537 Jy ! Component: 2250 - total flux cleaned = 0.00339627 Jy ! Component: 2300 - total flux cleaned = 0.00334924 Jy ! Component: 2350 - total flux cleaned = 0.00327901 Jy ! Component: 2400 - total flux cleaned = 0.00318698 Jy ! Component: 2450 - total flux cleaned = 0.00307338 Jy ! Component: 2500 - total flux cleaned = 0.00305111 Jy ! Component: 2550 - total flux cleaned = 0.00307319 Jy ! Component: 2600 - total flux cleaned = 0.00305128 Jy ! Component: 2650 - total flux cleaned = 0.0030948 Jy ! Component: 2700 - total flux cleaned = 0.00315967 Jy ! Component: 2750 - total flux cleaned = 0.00318139 Jy ! Component: 2800 - total flux cleaned = 0.0033083 Jy ! Component: 2850 - total flux cleaned = 0.00332928 Jy ! Component: 2900 - total flux cleaned = 0.00332922 Jy ! Component: 2950 - total flux cleaned = 0.00334989 Jy ! Component: 3000 - total flux cleaned = 0.00339049 Jy ! Component: 3050 - total flux cleaned = 0.00339035 Jy ! Component: 3100 - total flux cleaned = 0.00347046 Jy ! Component: 3150 - total flux cleaned = 0.00356974 Jy ! Component: 3200 - total flux cleaned = 0.00355005 Jy ! Component: 3250 - total flux cleaned = 0.00362851 Jy ! Component: 3300 - total flux cleaned = 0.00368687 Jy ! Component: 3350 - total flux cleaned = 0.00370622 Jy ! Component: 3400 - total flux cleaned = 0.00370632 Jy ! Component: 3450 - total flux cleaned = 0.00378244 Jy ! Component: 3500 - total flux cleaned = 0.0038391 Jy ! Component: 3550 - total flux cleaned = 0.00391371 Jy ! Component: 3600 - total flux cleaned = 0.00393199 Jy ! Component: 3650 - total flux cleaned = 0.00391356 Jy ! Component: 3700 - total flux cleaned = 0.00400495 Jy ! Component: 3750 - total flux cleaned = 0.00400473 Jy ! Component: 3800 - total flux cleaned = 0.00395058 Jy ! Component: 3850 - total flux cleaned = 0.00398646 Jy ! Component: 3900 - total flux cleaned = 0.00393299 Jy ! Component: 3950 - total flux cleaned = 0.0038799 Jy ! Component: 4000 - total flux cleaned = 0.00388004 Jy ! Component: 4050 - total flux cleaned = 0.00386234 Jy ! Total flux subtracted in 4096 components = 0.00384482 Jy ! Clean residual min=-0.001340 max=0.001039 Jy/beam ! Clean residual mean=0.000007 rms=0.000338 Jy/beam ! Combined flux in latest and established models = 0.663819 Jy keep ! Adding 280 model components to the UV plane model. ! The established model now contains 415 components and 0.663819 Jy ![Exited script file: muppet] wmap "J0443+3441_S_2015_03_17_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 7.19 x 8.643 at -59.69 degrees (North through East) ! Clean map min=-0.0032924 max=0.60061 Jy/beam ! Writing clean map to FITS file: J0443+3441_S_2015_03_17_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.600607 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000342216 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.170935 0.170935 0.34187 0.68374 1.36748 2.73496 5.46992 10.9398 21.8797 43.7593 87.5187 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.6 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 7.19 x 8.643 at -59.69 degrees (North through East) ! Clean map min=-0.0032924 max=0.60061 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0443+3441_S_2015_03_17_pus_uvs.log closed on Fri Dec 30 22:46:33 2016