! Started logfile: J0424+0036_S_2015_03_17_pus_uvs.log on Fri Dec 30 22:45:51 2016 obs J0424+0036_S_2015_03_17_pus_uva.fits ! Reading UV FITS file: J0424+0036_S_2015_03_17_pus_uva.fits ! AN table 1: 15 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.897778 visibilities/baseline/integration-bin. ! Found source: J0424+0036 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 330 lines of history. ! ! Reading 2424 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0424+0036_S_2015_03_17_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.695305Jy sigma=0.008072 ! Fit after self-cal, rms=0.688206Jy sigma=0.007998 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.806 mas, bmaj=7.167 mas, bpa=-7.585 degrees ! Estimated noise=1488.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.232019 Jy ! Component: 100 - total flux cleaned = 0.298918 Jy ! Total flux subtracted in 100 components = 0.298918 Jy ! Clean residual min=-0.016470 max=0.027451 Jy/beam ! Clean residual mean=-0.000026 rms=0.004768 Jy/beam ! Combined flux in latest and established models = 0.298918 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.298918 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110815Jy sigma=0.001064 ! Fit after self-cal, rms=0.110742Jy sigma=0.001063 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.239 mas, bmaj=7.602 mas, bpa=-6.174 degrees ! Estimated noise=1299.57 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0379885 Jy ! Component: 100 - total flux cleaned = 0.0584118 Jy ! Component: 150 - total flux cleaned = 0.0705302 Jy ! Component: 200 - total flux cleaned = 0.078242 Jy ! Total flux subtracted in 200 components = 0.078242 Jy ! Clean residual min=-0.014957 max=0.012693 Jy/beam ! Clean residual mean=-0.000033 rms=0.003593 Jy/beam ! Combined flux in latest and established models = 0.37716 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 57 components and 0.37716 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093158Jy sigma=0.000926 ! Fit after self-cal, rms=0.093143Jy sigma=0.000926 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.79 HN 0.99 KP 1.09 ! LA 0.99 MK 0.98 NL 0.99 OV 1.04 ! PT 1.05 SC 1.05 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.82 HN 1.02 KP 1.07 ! LA 0.97 MK 1.01 NL 1.16 OV 1.07 ! PT 1.00 SC 1.11 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.87 HN 1.05 KP 0.95 ! LA 0.76 MK 1.06 NL 1.29 OV 0.99 ! PT 1.04 SC 1.07 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.78 HN 0.96 KP 0.94 ! LA 0.85 MK 1.00 NL 1.04 OV 1.00 ! PT 1.06 SC 1.00 ! ! ! Fit before self-cal, rms=0.093143Jy sigma=0.000926 ! Fit after self-cal, rms=0.074433Jy sigma=0.000780 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.283 mas, bmaj=7.727 mas, bpa=-6.266 degrees ! Estimated noise=1307.95 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118208 Jy ! Component: 100 - total flux cleaned = 0.00136865 Jy ! Component: 150 - total flux cleaned = 0.00158956 Jy ! Component: 200 - total flux cleaned = 0.00184529 Jy ! Total flux subtracted in 200 components = 0.00184529 Jy ! Clean residual min=-0.004186 max=0.004268 Jy/beam ! Clean residual mean=-0.000005 rms=0.001058 Jy/beam ! Combined flux in latest and established models = 0.379005 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 67 components and 0.379005 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074333Jy sigma=0.000779 ! Fit after self-cal, rms=0.074274Jy sigma=0.000779 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074274Jy sigma=0.000779 ! Fit after self-cal, rms=0.074298Jy sigma=0.000779 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.286 mas, bmaj=7.72 mas, bpa=-6.206 degrees ! Estimated noise=1309.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000850062 Jy ! Component: 100 - total flux cleaned = 0.00103819 Jy ! Component: 150 - total flux cleaned = 0.00120898 Jy ! Component: 200 - total flux cleaned = 0.00133 Jy ! Total flux subtracted in 200 components = 0.00133 Jy ! Clean residual min=-0.004163 max=0.004135 Jy/beam ! Clean residual mean=-0.000004 rms=0.001037 Jy/beam ! Combined flux in latest and established models = 0.380335 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 71 components and 0.380335 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074240Jy sigma=0.000778 ! Fit after self-cal, rms=0.074240Jy sigma=0.000778 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000124097 Jy ! Component: 100 - total flux cleaned = 0.000196679 Jy ! Component: 150 - total flux cleaned = 0.000299478 Jy ! Component: 200 - total flux cleaned = 0.000396236 Jy ! Total flux subtracted in 200 components = 0.000396236 Jy ! Clean residual min=-0.004189 max=0.004066 Jy/beam ! Clean residual mean=-0.000004 rms=0.001031 Jy/beam ! Combined flux in latest and established models = 0.380731 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 74 components and 0.380731 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074212Jy sigma=0.000778 ! Fit after self-cal, rms=0.074212Jy sigma=0.000778 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074212Jy sigma=0.000778 ! Fit after self-cal, rms=0.074222Jy sigma=0.000778 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.288 mas, bmaj=7.716 mas, bpa=-6.166 degrees ! Estimated noise=1309.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000489495 Jy ! Component: 100 - total flux cleaned = 0.000554717 Jy ! Component: 150 - total flux cleaned = 0.000614252 Jy ! Component: 200 - total flux cleaned = 0.000670554 Jy ! Total flux subtracted in 200 components = 0.000670554 Jy ! Clean residual min=-0.004146 max=0.004073 Jy/beam ! Clean residual mean=-0.000004 rms=0.001019 Jy/beam ! Combined flux in latest and established models = 0.381402 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 79 components and 0.381402 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074194Jy sigma=0.000777 ! Fit after self-cal, rms=0.074195Jy sigma=0.000777 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.03557e-05 Jy ! Component: 100 - total flux cleaned = 0.000111454 Jy ! Component: 150 - total flux cleaned = 0.000159996 Jy ! Component: 200 - total flux cleaned = 0.000206427 Jy ! Total flux subtracted in 200 components = 0.000206427 Jy ! Clean residual min=-0.004163 max=0.004036 Jy/beam ! Clean residual mean=-0.000004 rms=0.001015 Jy/beam ! Combined flux in latest and established models = 0.381608 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 83 components and 0.381608 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074181Jy sigma=0.000777 ! Fit after self-cal, rms=0.074181Jy sigma=0.000777 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074181Jy sigma=0.000777 ! Fit after self-cal, rms=0.074179Jy sigma=0.000777 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.653 mas, bmaj=12.4 mas, bpa=8.535 degrees ! Estimated noise=1643.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.41607e-07 Jy ! Component: 100 - total flux cleaned = -2.86331e-05 Jy ! Component: 150 - total flux cleaned = -7.77955e-05 Jy ! Component: 200 - total flux cleaned = -0.000100105 Jy ! Total flux subtracted in 200 components = -0.000100105 Jy ! Clean residual min=-0.004372 max=0.004140 Jy/beam ! Clean residual mean=-0.000008 rms=0.001172 Jy/beam ! Combined flux in latest and established models = 0.381508 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 88 components and 0.381508 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074186Jy sigma=0.000777 ! Fit after self-cal, rms=0.074185Jy sigma=0.000777 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.48092e-05 Jy ! Component: 100 - total flux cleaned = -0.000103324 Jy ! Component: 150 - total flux cleaned = -0.000155376 Jy ! Component: 200 - total flux cleaned = -0.000186624 Jy ! Total flux subtracted in 200 components = -0.000186624 Jy ! Clean residual min=-0.004411 max=0.004124 Jy/beam ! Clean residual mean=-0.000008 rms=0.001165 Jy/beam ! Combined flux in latest and established models = 0.381322 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 90 components and 0.381322 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074193Jy sigma=0.000777 ! Fit after self-cal, rms=0.074193Jy sigma=0.000777 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.291 mas, bmaj=7.713 mas, bpa=-6.131 degrees ! Estimated noise=1310.31 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.291 x 7.713 at -6.131 degrees (North through East) ! Clean map min=-0.0039812 max=0.2977 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.839 mas, bmaj=7.256 mas, bpa=-7.603 degrees ! Estimated noise=1498.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.232986 Jy ! Component: 100 - total flux cleaned = 0.298551 Jy ! Component: 150 - total flux cleaned = 0.32722 Jy ! Component: 200 - total flux cleaned = 0.343865 Jy ! Total flux subtracted in 200 components = 0.343865 Jy ! Clean residual min=-0.005914 max=0.010141 Jy/beam ! Clean residual mean=-0.000005 rms=0.001895 Jy/beam ! Combined flux in latest and established models = 0.343865 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 41 model components to the UV plane model. ! The established model now contains 41 components and 0.343865 Jy ! Inverting map and beam ! Estimated beam: bmin=3.291 mas, bmaj=7.713 mas, bpa=-6.131 degrees ! Estimated noise=1310.31 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0139213 Jy ! Component: 100 - total flux cleaned = 0.0221637 Jy ! Component: 150 - total flux cleaned = 0.0273704 Jy ! Component: 200 - total flux cleaned = 0.0309221 Jy ! Total flux subtracted in 200 components = 0.0309221 Jy ! Clean residual min=-0.004244 max=0.004198 Jy/beam ! Clean residual mean=-0.000005 rms=0.001056 Jy/beam ! Combined flux in latest and established models = 0.374787 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 73 components and 0.374787 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.653 mas, bmaj=12.4 mas, bpa=8.535 degrees ! Estimated noise=1643.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00343231 Jy ! Component: 100 - total flux cleaned = 0.00514744 Jy ! Component: 150 - total flux cleaned = 0.00621928 Jy ! Component: 200 - total flux cleaned = 0.00690759 Jy ! Total flux subtracted in 200 components = 0.00690759 Jy ! Clean residual min=-0.004499 max=0.004065 Jy/beam ! Clean residual mean=-0.000007 rms=0.001138 Jy/beam ! Combined flux in latest and established models = 0.381695 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000163874 Jy ! Component: 100 - total flux cleaned = 0.000270943 Jy ! Component: 150 - total flux cleaned = 0.000304198 Jy ! Component: 200 - total flux cleaned = 0.000335742 Jy ! Total flux subtracted in 200 components = 0.000335742 Jy ! Clean residual min=-0.004458 max=0.004067 Jy/beam ! Clean residual mean=-0.000007 rms=0.001135 Jy/beam ! Combined flux in latest and established models = 0.382031 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 115 components and 0.382031 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.291 mas, bmaj=7.713 mas, bpa=-6.131 degrees ! Estimated noise=1310.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000425854 Jy ! Component: 100 - total flux cleaned = -0.000485344 Jy ! Component: 150 - total flux cleaned = -0.000440233 Jy ! Component: 200 - total flux cleaned = -0.000351605 Jy ! Total flux subtracted in 200 components = -0.000351605 Jy ! Clean residual min=-0.003997 max=0.003917 Jy/beam ! Clean residual mean=-0.000003 rms=0.000976 Jy/beam ! Combined flux in latest and established models = 0.381679 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 130 components and 0.381679 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074082Jy sigma=0.000776 ! Fit after self-cal, rms=0.074068Jy sigma=0.000776 wmodel J0424+0036_S_2015_03_17_pus_map.mod ! Writing 130 model components to file: J0424+0036_S_2015_03_17_pus_map.mod wobs J0424+0036_S_2015_03_17_pus_uvs.fits ! Writing UV FITS file: J0424+0036_S_2015_03_17_pus_uvs.fits wwins J0424+0036_S_2015_03_17_pus_map.win ! wwins: Wrote 2 windows to J0424+0036_S_2015_03_17_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 6.3157e-05 Jy ! Component: 100 - total flux cleaned = 0.000714851 Jy ! Component: 150 - total flux cleaned = 0.00132301 Jy ! Component: 200 - total flux cleaned = 0.0016668 Jy ! Component: 250 - total flux cleaned = 0.00210101 Jy ! Component: 300 - total flux cleaned = 0.0023593 Jy ! Component: 350 - total flux cleaned = 0.00250859 Jy ! Component: 400 - total flux cleaned = 0.0026051 Jy ! Component: 450 - total flux cleaned = 0.00264982 Jy ! Component: 500 - total flux cleaned = 0.00264788 Jy ! Component: 550 - total flux cleaned = 0.00269003 Jy ! Component: 600 - total flux cleaned = 0.00260543 Jy ! Component: 650 - total flux cleaned = 0.00260604 Jy ! Component: 700 - total flux cleaned = 0.00268589 Jy ! Component: 750 - total flux cleaned = 0.00260678 Jy ! Component: 800 - total flux cleaned = 0.00256754 Jy ! Component: 850 - total flux cleaned = 0.0026421 Jy ! Component: 900 - total flux cleaned = 0.00256979 Jy ! Component: 950 - total flux cleaned = 0.00249898 Jy ! Component: 1000 - total flux cleaned = 0.0023592 Jy ! Component: 1050 - total flux cleaned = 0.0022218 Jy ! Component: 1100 - total flux cleaned = 0.00212114 Jy ! Component: 1150 - total flux cleaned = 0.00195571 Jy ! Component: 1200 - total flux cleaned = 0.00179327 Jy ! Component: 1250 - total flux cleaned = 0.00173006 Jy ! Component: 1300 - total flux cleaned = 0.00163641 Jy ! Component: 1350 - total flux cleaned = 0.00157505 Jy ! Component: 1400 - total flux cleaned = 0.00160532 Jy ! Component: 1450 - total flux cleaned = 0.00148642 Jy ! Component: 1500 - total flux cleaned = 0.00148672 Jy ! Component: 1550 - total flux cleaned = 0.00140007 Jy ! Component: 1600 - total flux cleaned = 0.00128648 Jy ! Component: 1650 - total flux cleaned = 0.0013146 Jy ! Component: 1700 - total flux cleaned = 0.001204 Jy ! Component: 1750 - total flux cleaned = 0.00101341 Jy ! Component: 1800 - total flux cleaned = 0.0010135 Jy ! Component: 1850 - total flux cleaned = 0.000854538 Jy ! Component: 1900 - total flux cleaned = 0.00077693 Jy ! Component: 1950 - total flux cleaned = 0.000648513 Jy ! Component: 2000 - total flux cleaned = 0.000622969 Jy ! Component: 2050 - total flux cleaned = 0.000497844 Jy ! Component: 2100 - total flux cleaned = 0.000448534 Jy ! Component: 2150 - total flux cleaned = 0.000374901 Jy ! Component: 2200 - total flux cleaned = 0.000230513 Jy ! Component: 2250 - total flux cleaned = 0.000159457 Jy ! Component: 2300 - total flux cleaned = 0.00013639 Jy ! Component: 2350 - total flux cleaned = 6.69702e-05 Jy ! Component: 2400 - total flux cleaned = 2.11581e-05 Jy ! Component: 2450 - total flux cleaned = -1.29928e-06 Jy ! Component: 2500 - total flux cleaned = -1.47424e-06 Jy ! Component: 2550 - total flux cleaned = -1.84154e-06 Jy ! Component: 2600 - total flux cleaned = -4.53374e-05 Jy ! Component: 2650 - total flux cleaned = 1.92973e-05 Jy ! Component: 2700 - total flux cleaned = 6.18925e-05 Jy ! Component: 2750 - total flux cleaned = 4.11018e-05 Jy ! Component: 2800 - total flux cleaned = 0.000166091 Jy ! Component: 2850 - total flux cleaned = 0.000145557 Jy ! Component: 2900 - total flux cleaned = 0.000207032 Jy ! Component: 2950 - total flux cleaned = 0.000247455 Jy ! Component: 3000 - total flux cleaned = 0.000307444 Jy ! Component: 3050 - total flux cleaned = 0.000307583 Jy ! Component: 3100 - total flux cleaned = 0.000327445 Jy ! Component: 3150 - total flux cleaned = 0.000405219 Jy ! Component: 3200 - total flux cleaned = 0.000404999 Jy ! Component: 3250 - total flux cleaned = 0.000385876 Jy ! Component: 3300 - total flux cleaned = 0.00046211 Jy ! Component: 3350 - total flux cleaned = 0.000462122 Jy ! Component: 3400 - total flux cleaned = 0.000443447 Jy ! Component: 3450 - total flux cleaned = 0.000480707 Jy ! Component: 3500 - total flux cleaned = 0.00044389 Jy ! Component: 3550 - total flux cleaned = 0.000443887 Jy ! Component: 3600 - total flux cleaned = 0.000462028 Jy ! Component: 3650 - total flux cleaned = 0.000461951 Jy ! Component: 3700 - total flux cleaned = 0.000408272 Jy ! Component: 3750 - total flux cleaned = 0.000408259 Jy ! Component: 3800 - total flux cleaned = 0.000355072 Jy ! Component: 3850 - total flux cleaned = 0.000284967 Jy ! Component: 3900 - total flux cleaned = 0.000250149 Jy ! Component: 3950 - total flux cleaned = 0.000232968 Jy ! Component: 4000 - total flux cleaned = 0.000198505 Jy ! Component: 4050 - total flux cleaned = 0.000130027 Jy ! Total flux subtracted in 4096 components = 0.000146981 Jy ! Clean residual min=-0.000937 max=0.001096 Jy/beam ! Clean residual mean=-0.000002 rms=0.000300 Jy/beam ! Combined flux in latest and established models = 0.381826 Jy keep ! Adding 317 model components to the UV plane model. ! The established model now contains 447 components and 0.381826 Jy ![Exited script file: muppet] wmap "J0424+0036_S_2015_03_17_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.291 x 7.713 at -6.131 degrees (North through East) ! Clean map min=-0.0028176 max=0.30084 Jy/beam ! Writing clean map to FITS file: J0424+0036_S_2015_03_17_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.300844 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000291004 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.290188 0.290188 0.580376 1.16075 2.3215 4.64301 9.28601 18.572 37.1441 74.2881 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.3 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.291 x 7.713 at -6.131 degrees (North through East) ! Clean map min=-0.0028176 max=0.30084 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0424+0036_S_2015_03_17_pus_uvs.log closed on Fri Dec 30 22:45:58 2016