! Started logfile: J0201+0343_X_2015_03_17_pus_uvs.log on Sat Dec 31 18:58:33 2016 obs J0201+0343_X_2015_03_17_pus_uva.fits ! Reading UV FITS file: J0201+0343_X_2015_03_17_pus_uva.fits ! AN table 1: 83 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.964391 visibilities/baseline/integration-bin. ! Found source: J0201+0343 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 43224 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J0201+0343_X_2015_03_17_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.920210Jy sigma=0.009883 ! Fit after self-cal, rms=0.906740Jy sigma=0.009761 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7559 mas, bmaj=1.713 mas, bpa=-1.154 degrees ! Estimated noise=696.913 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.07405 Jy ! Component: 100 - total flux cleaned = 0.0907587 Jy ! Total flux subtracted in 100 components = 0.0907587 Jy ! Clean residual min=-0.004280 max=0.007655 Jy/beam ! Clean residual mean=-0.000009 rms=0.001242 Jy/beam ! Combined flux in latest and established models = 0.0907587 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0907587 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082898Jy sigma=0.000812 ! Fit after self-cal, rms=0.082898Jy sigma=0.000812 ! Inverting map ! Added new window around map position (0.8, 3.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00817079 Jy ! Component: 100 - total flux cleaned = 0.0132671 Jy ! Total flux subtracted in 100 components = 0.0132671 Jy ! Clean residual min=-0.003850 max=0.004534 Jy/beam ! Clean residual mean=-0.000002 rms=0.000989 Jy/beam ! Combined flux in latest and established models = 0.104026 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 15 components and 0.104026 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082056Jy sigma=0.000802 ! Fit after self-cal, rms=0.082032Jy sigma=0.000801 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9486 mas, bmaj=2.003 mas, bpa=-1.255 degrees ! Estimated noise=322.513 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00461402 Jy ! Component: 100 - total flux cleaned = 0.00764286 Jy ! Component: 150 - total flux cleaned = 0.00970388 Jy ! Component: 200 - total flux cleaned = 0.01113 Jy ! Total flux subtracted in 200 components = 0.01113 Jy ! Clean residual min=-0.004792 max=0.004185 Jy/beam ! Clean residual mean=0.000018 rms=0.000966 Jy/beam ! Combined flux in latest and established models = 0.115156 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 30 components and 0.115156 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081726Jy sigma=0.000798 ! Fit after self-cal, rms=0.081720Jy sigma=0.000798 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.10 HN 1.14 KP 0.89 ! LA 1.06 MK 0.93 NL 0.99 OV 0.98 ! PT 1.04 SC 1.03 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.14 HN 1.22 KP 0.87 ! LA 1.03 MK 0.99 NL 1.00 OV 0.98 ! PT 0.99 SC 1.04 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.13 HN 1.16 KP 0.78 ! LA 1.10 MK 0.97 NL 0.98 OV 1.00 ! PT 0.98 SC 1.03 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.12 HN 1.22 KP 0.78 ! LA 1.06 MK 0.99 NL 0.98 OV 0.98 ! PT 0.98 SC 1.04 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.10 HN 1.06 KP 0.72 ! LA 1.07 MK 0.99 NL 0.96 OV 1.00 ! PT 0.98 SC 1.03 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.08 HN 1.19 KP 0.73 ! LA 1.08 MK 0.94 NL 0.99 OV 1.01 ! PT 0.97 SC 0.97 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.14 HN 1.24 KP 0.74 ! LA 1.12 MK 0.96 NL 1.00 OV 1.00 ! PT 1.00 SC 1.05 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.14 HN 1.21 KP 0.75 ! LA 1.08 MK 0.98 NL 0.97 OV 1.06 ! PT 0.97 SC 1.00 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.16 HN 1.12 KP 0.74 ! LA 1.07 MK 0.99 NL 0.98 OV 1.04 ! PT 1.03 SC 0.99 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.14 HN 1.11 KP 0.75 ! LA 1.12 MK 1.00 NL 1.04 OV 1.00 ! PT 0.99 SC 0.99 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.14 HN 1.13 KP 0.79 ! LA 1.06 MK 0.99 NL 0.98 OV 1.01 ! PT 0.96 SC 1.05 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.06 HN 1.18 KP 0.85 ! LA 1.11 MK 1.00 NL 1.02 OV 1.04 ! PT 0.98 SC 1.00 ! ! ! Fit before self-cal, rms=0.081720Jy sigma=0.000798 ! Fit after self-cal, rms=0.082971Jy sigma=0.000784 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9532 mas, bmaj=2.004 mas, bpa=-1.268 degrees ! Estimated noise=319.809 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000762622 Jy ! Component: 100 - total flux cleaned = 0.000723147 Jy ! Component: 150 - total flux cleaned = 0.000673153 Jy ! Component: 200 - total flux cleaned = 0.000643391 Jy ! Total flux subtracted in 200 components = 0.000643391 Jy ! Clean residual min=-0.001086 max=0.001242 Jy/beam ! Clean residual mean=0.000002 rms=0.000292 Jy/beam ! Combined flux in latest and established models = 0.115799 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 41 components and 0.115799 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082959Jy sigma=0.000783 ! Fit after self-cal, rms=0.083072Jy sigma=0.000783 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083072Jy sigma=0.000783 ! Fit after self-cal, rms=0.084358Jy sigma=0.000782 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9526 mas, bmaj=2.002 mas, bpa=-1.25 degrees ! Estimated noise=320.286 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000124672 Jy ! Component: 100 - total flux cleaned = 9.79727e-05 Jy ! Component: 150 - total flux cleaned = 9.88039e-05 Jy ! Component: 200 - total flux cleaned = 7.85587e-05 Jy ! Total flux subtracted in 200 components = 7.85587e-05 Jy ! Clean residual min=-0.001019 max=0.000881 Jy/beam ! Clean residual mean=0.000002 rms=0.000238 Jy/beam ! Combined flux in latest and established models = 0.115878 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 47 components and 0.115878 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084354Jy sigma=0.000782 ! Fit after self-cal, rms=0.084386Jy sigma=0.000782 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.01481e-05 Jy ! Component: 100 - total flux cleaned = -2.95444e-05 Jy ! Component: 150 - total flux cleaned = -4.71675e-05 Jy ! Component: 200 - total flux cleaned = -5.55061e-05 Jy ! Total flux subtracted in 200 components = -5.55061e-05 Jy ! Clean residual min=-0.001009 max=0.000886 Jy/beam ! Clean residual mean=0.000002 rms=0.000236 Jy/beam ! Combined flux in latest and established models = 0.115822 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 51 components and 0.115822 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084384Jy sigma=0.000782 ! Fit after self-cal, rms=0.084383Jy sigma=0.000782 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084383Jy sigma=0.000782 ! Fit after self-cal, rms=0.084455Jy sigma=0.000782 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9526 mas, bmaj=2.001 mas, bpa=-1.321 degrees ! Estimated noise=320.118 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.92456e-05 Jy ! Component: 100 - total flux cleaned = -4.91089e-05 Jy ! Component: 150 - total flux cleaned = -4.92099e-05 Jy ! Component: 200 - total flux cleaned = -5.7521e-05 Jy ! Total flux subtracted in 200 components = -5.7521e-05 Jy ! Clean residual min=-0.001013 max=0.000857 Jy/beam ! Clean residual mean=0.000002 rms=0.000233 Jy/beam ! Combined flux in latest and established models = 0.115765 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 53 components and 0.115765 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084453Jy sigma=0.000782 ! Fit after self-cal, rms=0.084455Jy sigma=0.000782 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.57897e-05 Jy ! Component: 100 - total flux cleaned = -2.32005e-05 Jy ! Component: 150 - total flux cleaned = -3.01686e-05 Jy ! Component: 200 - total flux cleaned = -3.72314e-05 Jy ! Total flux subtracted in 200 components = -3.72314e-05 Jy ! Clean residual min=-0.001012 max=0.000853 Jy/beam ! Clean residual mean=0.000002 rms=0.000232 Jy/beam ! Combined flux in latest and established models = 0.115727 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 53 components and 0.115727 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084454Jy sigma=0.000782 ! Fit after self-cal, rms=0.084453Jy sigma=0.000782 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084453Jy sigma=0.000782 ! Fit after self-cal, rms=0.084469Jy sigma=0.000782 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.247 mas, bmaj=3.173 mas, bpa=1.826 degrees ! Estimated noise=390.431 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.51384e-06 Jy ! Component: 100 - total flux cleaned = -4.73716e-05 Jy ! Component: 150 - total flux cleaned = -6.43632e-05 Jy ! Component: 200 - total flux cleaned = -6.40985e-05 Jy ! Total flux subtracted in 200 components = -6.40985e-05 Jy ! Clean residual min=-0.000939 max=0.000883 Jy/beam ! Clean residual mean=0.000004 rms=0.000277 Jy/beam ! Combined flux in latest and established models = 0.115663 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 57 components and 0.115663 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084470Jy sigma=0.000782 ! Fit after self-cal, rms=0.084470Jy sigma=0.000782 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.83264e-05 Jy ! Component: 100 - total flux cleaned = -2.92734e-05 Jy ! Component: 150 - total flux cleaned = -4.63363e-05 Jy ! Component: 200 - total flux cleaned = -6.11914e-05 Jy ! Total flux subtracted in 200 components = -6.11914e-05 Jy ! Clean residual min=-0.000936 max=0.000888 Jy/beam ! Clean residual mean=0.000005 rms=0.000275 Jy/beam ! Combined flux in latest and established models = 0.115602 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 60 components and 0.115602 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084472Jy sigma=0.000782 ! Fit after self-cal, rms=0.084472Jy sigma=0.000782 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.9526 mas, bmaj=2.001 mas, bpa=-1.39 degrees ! Estimated noise=319.992 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9526 x 2.001 at -1.39 degrees (North through East) ! Clean map min=-0.0009409 max=0.095369 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.759 mas, bmaj=1.712 mas, bpa=-1.139 degrees ! Estimated noise=691.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0733996 Jy ! Component: 100 - total flux cleaned = 0.0905443 Jy ! Component: 150 - total flux cleaned = 0.0987663 Jy ! Component: 200 - total flux cleaned = 0.10386 Jy ! Total flux subtracted in 200 components = 0.10386 Jy ! Clean residual min=-0.001912 max=0.002670 Jy/beam ! Clean residual mean=-0.000006 rms=0.000566 Jy/beam ! Combined flux in latest and established models = 0.10386 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.10386 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9526 mas, bmaj=2.001 mas, bpa=-1.39 degrees ! Estimated noise=319.992 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00401655 Jy ! Component: 100 - total flux cleaned = 0.00640572 Jy ! Component: 150 - total flux cleaned = 0.00797215 Jy ! Component: 200 - total flux cleaned = 0.0090753 Jy ! Total flux subtracted in 200 components = 0.0090753 Jy ! Clean residual min=-0.001029 max=0.000961 Jy/beam ! Clean residual mean=0.000000 rms=0.000252 Jy/beam ! Combined flux in latest and established models = 0.112936 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 43 components and 0.112936 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.247 mas, bmaj=3.173 mas, bpa=1.826 degrees ! Estimated noise=390.431 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00121009 Jy ! Component: 100 - total flux cleaned = 0.00182213 Jy ! Component: 150 - total flux cleaned = 0.00211121 Jy ! Component: 200 - total flux cleaned = 0.00217658 Jy ! Total flux subtracted in 200 components = 0.00217658 Jy ! Clean residual min=-0.000919 max=0.000914 Jy/beam ! Clean residual mean=0.000004 rms=0.000277 Jy/beam ! Combined flux in latest and established models = 0.115112 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.85251e-05 Jy ! Component: 100 - total flux cleaned = 7.69926e-05 Jy ! Component: 150 - total flux cleaned = 9.8809e-05 Jy ! Component: 200 - total flux cleaned = 0.000122635 Jy ! Total flux subtracted in 200 components = 0.000122635 Jy ! Clean residual min=-0.000925 max=0.000931 Jy/beam ! Clean residual mean=0.000004 rms=0.000274 Jy/beam ! Combined flux in latest and established models = 0.115235 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 61 components and 0.115235 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9526 mas, bmaj=2.001 mas, bpa=-1.39 degrees ! Estimated noise=319.992 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.60664e-05 Jy ! Component: 100 - total flux cleaned = -1.17822e-05 Jy ! Component: 150 - total flux cleaned = 1.01056e-05 Jy ! Component: 200 - total flux cleaned = 4.6283e-05 Jy ! Total flux subtracted in 200 components = 4.6283e-05 Jy ! Clean residual min=-0.001038 max=0.000867 Jy/beam ! Clean residual mean=0.000002 rms=0.000226 Jy/beam ! Combined flux in latest and established models = 0.115281 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 69 components and 0.115281 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084468Jy sigma=0.000782 ! Fit after self-cal, rms=0.084464Jy sigma=0.000782 wmodel J0201+0343_X_2015_03_17_pus_map.mod ! Writing 69 model components to file: J0201+0343_X_2015_03_17_pus_map.mod wobs J0201+0343_X_2015_03_17_pus_uvs.fits ! Writing UV FITS file: J0201+0343_X_2015_03_17_pus_uvs.fits wwins J0201+0343_X_2015_03_17_pus_map.win ! wwins: Wrote 2 windows to J0201+0343_X_2015_03_17_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000237829 Jy ! Component: 100 - total flux cleaned = -0.000238268 Jy ! Component: 150 - total flux cleaned = -0.000307633 Jy ! Component: 200 - total flux cleaned = -0.000254921 Jy ! Component: 250 - total flux cleaned = -0.000229284 Jy ! Component: 300 - total flux cleaned = -0.000179908 Jy ! Component: 350 - total flux cleaned = -0.000168127 Jy ! Component: 400 - total flux cleaned = -0.000109522 Jy ! Component: 450 - total flux cleaned = -7.52126e-05 Jy ! Component: 500 - total flux cleaned = -1.93951e-05 Jy ! Component: 550 - total flux cleaned = 2.43537e-05 Jy ! Component: 600 - total flux cleaned = 7.81625e-05 Jy ! Component: 650 - total flux cleaned = 0.000151734 Jy ! Component: 700 - total flux cleaned = 0.000203416 Jy ! Component: 750 - total flux cleaned = 0.000234109 Jy ! Component: 800 - total flux cleaned = 0.000274247 Jy ! Component: 850 - total flux cleaned = 0.000323338 Jy ! Component: 900 - total flux cleaned = 0.000323326 Jy ! Component: 950 - total flux cleaned = 0.000390017 Jy ! Component: 1000 - total flux cleaned = 0.000445948 Jy ! Component: 1050 - total flux cleaned = 0.000482753 Jy ! Component: 1100 - total flux cleaned = 0.000519077 Jy ! Component: 1150 - total flux cleaned = 0.000545893 Jy ! Component: 1200 - total flux cleaned = 0.000599024 Jy ! Component: 1250 - total flux cleaned = 0.000633935 Jy ! Component: 1300 - total flux cleaned = 0.000702815 Jy ! Component: 1350 - total flux cleaned = 0.000736749 Jy ! Component: 1400 - total flux cleaned = 0.000795577 Jy ! Component: 1450 - total flux cleaned = 0.000820401 Jy ! Component: 1500 - total flux cleaned = 0.000853202 Jy ! Component: 1550 - total flux cleaned = 0.000901905 Jy ! Component: 1600 - total flux cleaned = 0.000933971 Jy ! Component: 1650 - total flux cleaned = 0.000965692 Jy ! Component: 1700 - total flux cleaned = 0.00100496 Jy ! Component: 1750 - total flux cleaned = 0.00104374 Jy ! Component: 1800 - total flux cleaned = 0.00107451 Jy ! Component: 1850 - total flux cleaned = 0.00112787 Jy ! Component: 1900 - total flux cleaned = 0.00118047 Jy ! Component: 1950 - total flux cleaned = 0.00120281 Jy ! Component: 2000 - total flux cleaned = 0.00126166 Jy ! Total flux subtracted in 2048 components = 0.00131262 Jy ! Clean residual min=-0.000385 max=0.000478 Jy/beam ! Clean residual mean=0.000001 rms=0.000138 Jy/beam ! Combined flux in latest and established models = 0.116594 Jy keep ! Adding 135 model components to the UV plane model. ! The established model now contains 204 components and 0.116594 Jy ![Exited script file: muppet] wmap "J0201+0343_X_2015_03_17_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9526 x 2.001 at -1.39 degrees (North through East) ! Clean map min=-0.0010587 max=0.09578 Jy/beam ! Writing clean map to FITS file: J0201+0343_X_2015_03_17_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0957804 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000137301 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.430048 0.430048 0.860097 1.72019 3.44039 6.88077 13.7615 27.5231 55.0462 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.095 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9526 x 2.001 at -1.39 degrees (North through East) ! Clean map min=-0.0010587 max=0.09578 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0201+0343_X_2015_03_17_pus_uvs.log closed on Sat Dec 31 18:58:36 2016