! Started logfile: J0143+4915_S_2015_03_17_pus_uvs.log on Fri Dec 30 22:40:49 2016 obs J0143+4915_S_2015_03_17_pus_uva.fits ! Reading UV FITS file: J0143+4915_S_2015_03_17_pus_uva.fits ! AN table 1: 121 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.973554 visibilities/baseline/integration-bin. ! Found source: J0143+4915 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 330 lines of history. ! ! Reading 21204 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0143+4915_S_2015_03_17_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.927998Jy sigma=0.010764 ! Fit after self-cal, rms=0.896429Jy sigma=0.010413 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.456 mas, bmaj=3.914 mas, bpa=-74.61 degrees ! Estimated noise=677.267 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0728578 Jy ! Component: 100 - total flux cleaned = 0.101697 Jy ! Total flux subtracted in 100 components = 0.101697 Jy ! Clean residual min=-0.007197 max=0.017294 Jy/beam ! Clean residual mean=-0.000038 rms=0.002130 Jy/beam ! Combined flux in latest and established models = 0.101697 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.101697 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093569Jy sigma=0.000964 ! Fit after self-cal, rms=0.093382Jy sigma=0.000962 ! Inverting map ! Added new window around map position (6, -6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.018294 Jy ! Component: 100 - total flux cleaned = 0.0307802 Jy ! Total flux subtracted in 100 components = 0.0307802 Jy ! Clean residual min=-0.005338 max=0.010992 Jy/beam ! Clean residual mean=-0.000026 rms=0.001599 Jy/beam ! Combined flux in latest and established models = 0.132477 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 32 components and 0.132477 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086948Jy sigma=0.000892 ! Fit after self-cal, rms=0.086804Jy sigma=0.000891 ! Inverting map ! Added new window around map position (9.5, -11). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0115548 Jy ! Component: 100 - total flux cleaned = 0.0201603 Jy ! Total flux subtracted in 100 components = 0.0201603 Jy ! Clean residual min=-0.004374 max=0.007792 Jy/beam ! Clean residual mean=-0.000019 rms=0.001310 Jy/beam ! Combined flux in latest and established models = 0.152638 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 52 components and 0.152638 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083856Jy sigma=0.000860 ! Fit after self-cal, rms=0.083771Jy sigma=0.000859 ! Inverting map ! Added new window around map position (16, -17). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00844157 Jy ! Component: 100 - total flux cleaned = 0.0150467 Jy ! Total flux subtracted in 100 components = 0.0150467 Jy ! Clean residual min=-0.003824 max=0.005324 Jy/beam ! Clean residual mean=-0.000014 rms=0.001116 Jy/beam ! Combined flux in latest and established models = 0.167684 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 73 components and 0.167684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082199Jy sigma=0.000843 ! Fit after self-cal, rms=0.082136Jy sigma=0.000842 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.179 mas, bmaj=4.634 mas, bpa=87.55 degrees ! Estimated noise=429.519 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101692 Jy ! Component: 100 - total flux cleaned = 0.0179347 Jy ! Component: 150 - total flux cleaned = 0.0241579 Jy ! Component: 200 - total flux cleaned = 0.0292265 Jy ! Total flux subtracted in 200 components = 0.0292265 Jy ! Clean residual min=-0.003448 max=0.004796 Jy/beam ! Clean residual mean=-0.000001 rms=0.001088 Jy/beam ! Combined flux in latest and established models = 0.196911 Jy ! Performing phase self-cal ! Adding 69 model components to the UV plane model. ! The established model now contains 123 components and 0.196911 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079862Jy sigma=0.000822 ! Fit after self-cal, rms=0.079800Jy sigma=0.000822 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.83 HN 0.97 KP 1.08 ! LA 0.94 MK 1.18 NL 0.91 OV 0.99 ! PT 1.01 SC 1.05 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.87 HN 1.00 KP 1.05 ! LA 0.92 MK 1.24 NL 1.00 OV 1.04 ! PT 1.01 SC 1.14 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.92 HN 0.99 KP 0.95 ! LA 0.76 MK 1.15 NL 1.17 OV 0.94 ! PT 0.98 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.91 HN 0.98 KP 0.95 ! LA 0.81 MK 1.17 NL 1.04 OV 1.03 ! PT 1.00 SC 0.96 ! ! ! Fit before self-cal, rms=0.079800Jy sigma=0.000822 ! Fit after self-cal, rms=0.074853Jy sigma=0.000804 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.342 mas, bmaj=4.815 mas, bpa=81.38 degrees ! Estimated noise=429.809 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00337703 Jy ! Component: 100 - total flux cleaned = 0.00500285 Jy ! Component: 150 - total flux cleaned = 0.00560101 Jy ! Component: 200 - total flux cleaned = 0.0059836 Jy ! Total flux subtracted in 200 components = 0.0059836 Jy ! Clean residual min=-0.002410 max=0.002079 Jy/beam ! Clean residual mean=0.000018 rms=0.000582 Jy/beam ! Combined flux in latest and established models = 0.202895 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 153 components and 0.202895 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074675Jy sigma=0.000802 ! Fit after self-cal, rms=0.074591Jy sigma=0.000802 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074591Jy sigma=0.000802 ! Fit after self-cal, rms=0.074060Jy sigma=0.000798 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.3 mas, bmaj=4.792 mas, bpa=81.89 degrees ! Estimated noise=428.475 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00133774 Jy ! Component: 100 - total flux cleaned = 0.00190616 Jy ! Component: 150 - total flux cleaned = 0.00224824 Jy ! Component: 200 - total flux cleaned = 0.00247639 Jy ! Total flux subtracted in 200 components = 0.00247639 Jy ! Clean residual min=-0.001504 max=0.001461 Jy/beam ! Clean residual mean=0.000015 rms=0.000375 Jy/beam ! Combined flux in latest and established models = 0.205371 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 176 components and 0.205371 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074024Jy sigma=0.000798 ! Fit after self-cal, rms=0.074036Jy sigma=0.000798 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000521922 Jy ! Component: 100 - total flux cleaned = 0.000732977 Jy ! Component: 150 - total flux cleaned = 0.000832772 Jy ! Component: 200 - total flux cleaned = 0.000920478 Jy ! Total flux subtracted in 200 components = 0.000920478 Jy ! Clean residual min=-0.001467 max=0.001447 Jy/beam ! Clean residual mean=0.000016 rms=0.000367 Jy/beam ! Combined flux in latest and established models = 0.206291 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 185 components and 0.206291 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074024Jy sigma=0.000798 ! Fit after self-cal, rms=0.074024Jy sigma=0.000798 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074024Jy sigma=0.000798 ! Fit after self-cal, rms=0.073847Jy sigma=0.000797 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.293 mas, bmaj=4.795 mas, bpa=82.35 degrees ! Estimated noise=427.544 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000455135 Jy ! Component: 100 - total flux cleaned = 0.000667197 Jy ! Component: 150 - total flux cleaned = 0.000738671 Jy ! Component: 200 - total flux cleaned = 0.000818548 Jy ! Total flux subtracted in 200 components = 0.000818548 Jy ! Clean residual min=-0.001447 max=0.001338 Jy/beam ! Clean residual mean=0.000015 rms=0.000356 Jy/beam ! Combined flux in latest and established models = 0.20711 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 190 components and 0.20711 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073837Jy sigma=0.000797 ! Fit after self-cal, rms=0.073835Jy sigma=0.000797 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000215104 Jy ! Component: 100 - total flux cleaned = 0.000275238 Jy ! Component: 150 - total flux cleaned = 0.000330751 Jy ! Component: 200 - total flux cleaned = 0.000381569 Jy ! Total flux subtracted in 200 components = 0.000381569 Jy ! Clean residual min=-0.001417 max=0.001318 Jy/beam ! Clean residual mean=0.000015 rms=0.000353 Jy/beam ! Combined flux in latest and established models = 0.207492 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 196 components and 0.207492 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073830Jy sigma=0.000797 ! Fit after self-cal, rms=0.073831Jy sigma=0.000797 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073831Jy sigma=0.000797 ! Fit after self-cal, rms=0.073813Jy sigma=0.000797 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.985 mas, bmaj=9.017 mas, bpa=69.02 degrees ! Estimated noise=520.956 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000613608 Jy ! Component: 100 - total flux cleaned = 0.000754408 Jy ! Component: 150 - total flux cleaned = 0.000806409 Jy ! Component: 200 - total flux cleaned = 0.000856393 Jy ! Total flux subtracted in 200 components = 0.000856393 Jy ! Clean residual min=-0.001527 max=0.001717 Jy/beam ! Clean residual mean=0.000031 rms=0.000491 Jy/beam ! Combined flux in latest and established models = 0.208348 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 203 components and 0.208348 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073812Jy sigma=0.000797 ! Fit after self-cal, rms=0.073811Jy sigma=0.000797 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000223126 Jy ! Component: 100 - total flux cleaned = 0.000261065 Jy ! Component: 150 - total flux cleaned = 0.000293913 Jy ! Component: 200 - total flux cleaned = 0.000311463 Jy ! Total flux subtracted in 200 components = 0.000311463 Jy ! Clean residual min=-0.001497 max=0.001723 Jy/beam ! Clean residual mean=0.000032 rms=0.000487 Jy/beam ! Combined flux in latest and established models = 0.208659 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 207 components and 0.208659 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073811Jy sigma=0.000797 ! Fit after self-cal, rms=0.073811Jy sigma=0.000797 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.292 mas, bmaj=4.799 mas, bpa=82.56 degrees ! Estimated noise=427.457 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.292 x 4.799 at 82.56 degrees (North through East) ! Clean map min=-0.0013257 max=0.096632 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.56 mas, bmaj=4.004 mas, bpa=-79.19 degrees ! Estimated noise=693.151 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0733634 Jy ! Component: 100 - total flux cleaned = 0.103527 Jy ! Component: 150 - total flux cleaned = 0.122669 Jy ! Component: 200 - total flux cleaned = 0.136452 Jy ! Total flux subtracted in 200 components = 0.136452 Jy ! Clean residual min=-0.004773 max=0.008050 Jy/beam ! Clean residual mean=-0.000020 rms=0.001377 Jy/beam ! Combined flux in latest and established models = 0.136452 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.136452 Jy ! Inverting map and beam ! Estimated beam: bmin=4.292 mas, bmaj=4.799 mas, bpa=82.56 degrees ! Estimated noise=427.457 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.015827 Jy ! Component: 100 - total flux cleaned = 0.0273472 Jy ! Component: 150 - total flux cleaned = 0.0361164 Jy ! Component: 200 - total flux cleaned = 0.0429533 Jy ! Total flux subtracted in 200 components = 0.0429533 Jy ! Clean residual min=-0.002623 max=0.004227 Jy/beam ! Clean residual mean=-0.000002 rms=0.000837 Jy/beam ! Combined flux in latest and established models = 0.179406 Jy ! Adding 63 model components to the UV plane model. ! The established model now contains 85 components and 0.179406 Jy ! Inverting map ! Added new window around map position (-0.5, 4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00543549 Jy ! Component: 100 - total flux cleaned = 0.00976114 Jy ! Component: 150 - total flux cleaned = 0.013243 Jy ! Component: 200 - total flux cleaned = 0.0160647 Jy ! Total flux subtracted in 200 components = 0.0160647 Jy ! Clean residual min=-0.001717 max=0.001791 Jy/beam ! Clean residual mean=0.000008 rms=0.000474 Jy/beam ! Combined flux in latest and established models = 0.195471 Jy ! Adding 65 model components to the UV plane model. ! The established model now contains 132 components and 0.195471 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.985 mas, bmaj=9.017 mas, bpa=69.02 degrees ! Estimated noise=520.956 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00396258 Jy ! Component: 100 - total flux cleaned = 0.00658612 Jy ! Component: 150 - total flux cleaned = 0.00846729 Jy ! Component: 200 - total flux cleaned = 0.00987143 Jy ! Total flux subtracted in 200 components = 0.00987143 Jy ! Clean residual min=-0.001538 max=0.001617 Jy/beam ! Clean residual mean=0.000028 rms=0.000500 Jy/beam ! Combined flux in latest and established models = 0.205342 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106803 Jy ! Component: 100 - total flux cleaned = 0.00189015 Jy ! Component: 150 - total flux cleaned = 0.00253207 Jy ! Component: 200 - total flux cleaned = 0.00292785 Jy ! Total flux subtracted in 200 components = 0.00292785 Jy ! Clean residual min=-0.001446 max=0.001600 Jy/beam ! Clean residual mean=0.000032 rms=0.000466 Jy/beam ! Combined flux in latest and established models = 0.20827 Jy ! Adding 137 model components to the UV plane model. ! The established model now contains 244 components and 0.20827 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.292 mas, bmaj=4.799 mas, bpa=82.56 degrees ! Estimated noise=427.457 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000578356 Jy ! Component: 100 - total flux cleaned = 0.000797003 Jy ! Component: 150 - total flux cleaned = 0.000867678 Jy ! Component: 200 - total flux cleaned = 0.000888311 Jy ! Total flux subtracted in 200 components = 0.000888311 Jy ! Clean residual min=-0.001294 max=0.001270 Jy/beam ! Clean residual mean=0.000016 rms=0.000341 Jy/beam ! Combined flux in latest and established models = 0.209158 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 259 components and 0.209158 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073805Jy sigma=0.000797 ! Fit after self-cal, rms=0.073799Jy sigma=0.000797 wmodel J0143+4915_S_2015_03_17_pus_map.mod ! Writing 259 model components to file: J0143+4915_S_2015_03_17_pus_map.mod wobs J0143+4915_S_2015_03_17_pus_uvs.fits ! Writing UV FITS file: J0143+4915_S_2015_03_17_pus_uvs.fits wwins J0143+4915_S_2015_03_17_pus_map.win ! wwins: Wrote 5 windows to J0143+4915_S_2015_03_17_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000142168 Jy ! Component: 100 - total flux cleaned = 0.000164924 Jy ! Component: 150 - total flux cleaned = 0.000207901 Jy ! Component: 200 - total flux cleaned = 0.000187171 Jy ! Component: 250 - total flux cleaned = 0.000207715 Jy ! Component: 300 - total flux cleaned = 0.000305322 Jy ! Component: 350 - total flux cleaned = 0.000381375 Jy ! Component: 400 - total flux cleaned = 0.000455463 Jy ! Component: 450 - total flux cleaned = 0.000509698 Jy ! Component: 500 - total flux cleaned = 0.000544823 Jy ! Component: 550 - total flux cleaned = 0.00061365 Jy ! Component: 600 - total flux cleaned = 0.000630245 Jy ! Component: 650 - total flux cleaned = 0.000630136 Jy ! Component: 700 - total flux cleaned = 0.000646573 Jy ! Component: 750 - total flux cleaned = 0.000630725 Jy ! Component: 800 - total flux cleaned = 0.000646901 Jy ! Component: 850 - total flux cleaned = 0.000662728 Jy ! Component: 900 - total flux cleaned = 0.000662719 Jy ! Component: 950 - total flux cleaned = 0.000632609 Jy ! Component: 1000 - total flux cleaned = 0.000632579 Jy ! Component: 1050 - total flux cleaned = 0.000588911 Jy ! Component: 1100 - total flux cleaned = 0.000517201 Jy ! Component: 1150 - total flux cleaned = 0.000503207 Jy ! Component: 1200 - total flux cleaned = 0.000461336 Jy ! Component: 1250 - total flux cleaned = 0.000433991 Jy ! Component: 1300 - total flux cleaned = 0.00044768 Jy ! Component: 1350 - total flux cleaned = 0.000407265 Jy ! Component: 1400 - total flux cleaned = 0.00044695 Jy ! Component: 1450 - total flux cleaned = 0.000460028 Jy ! Component: 1500 - total flux cleaned = 0.000446938 Jy ! Component: 1550 - total flux cleaned = 0.000434311 Jy ! Component: 1600 - total flux cleaned = 0.000446865 Jy ! Component: 1650 - total flux cleaned = 0.000459475 Jy ! Component: 1700 - total flux cleaned = 0.000459595 Jy ! Component: 1750 - total flux cleaned = 0.000483924 Jy ! Component: 1800 - total flux cleaned = 0.000483972 Jy ! Component: 1850 - total flux cleaned = 0.000508143 Jy ! Component: 1900 - total flux cleaned = 0.000484441 Jy ! Component: 1950 - total flux cleaned = 0.000508087 Jy ! Component: 2000 - total flux cleaned = 0.000508025 Jy ! Component: 2050 - total flux cleaned = 0.00046179 Jy ! Component: 2100 - total flux cleaned = 0.000541966 Jy ! Component: 2150 - total flux cleaned = 0.000519173 Jy ! Component: 2200 - total flux cleaned = 0.000530486 Jy ! Component: 2250 - total flux cleaned = 0.00055279 Jy ! Component: 2300 - total flux cleaned = 0.000552865 Jy ! Component: 2350 - total flux cleaned = 0.000585757 Jy ! Component: 2400 - total flux cleaned = 0.000585673 Jy ! Component: 2450 - total flux cleaned = 0.000596367 Jy ! Component: 2500 - total flux cleaned = 0.000639003 Jy ! Component: 2550 - total flux cleaned = 0.000638971 Jy ! Component: 2600 - total flux cleaned = 0.000660034 Jy ! Component: 2650 - total flux cleaned = 0.000680888 Jy ! Component: 2700 - total flux cleaned = 0.00068085 Jy ! Component: 2750 - total flux cleaned = 0.000691 Jy ! Component: 2800 - total flux cleaned = 0.000701163 Jy ! Component: 2850 - total flux cleaned = 0.00070099 Jy ! Component: 2900 - total flux cleaned = 0.000711034 Jy ! Component: 2950 - total flux cleaned = 0.000710934 Jy ! Component: 3000 - total flux cleaned = 0.000720851 Jy ! Component: 3050 - total flux cleaned = 0.000720813 Jy ! Component: 3100 - total flux cleaned = 0.000701431 Jy ! Component: 3150 - total flux cleaned = 0.000778438 Jy ! Component: 3200 - total flux cleaned = 0.000730597 Jy ! Component: 3250 - total flux cleaned = 0.000730638 Jy ! Component: 3300 - total flux cleaned = 0.000730608 Jy ! Component: 3350 - total flux cleaned = 0.000786801 Jy ! Component: 3400 - total flux cleaned = 0.000796049 Jy ! Component: 3450 - total flux cleaned = 0.000796079 Jy ! Component: 3500 - total flux cleaned = 0.000786876 Jy ! Component: 3550 - total flux cleaned = 0.000795972 Jy ! Component: 3600 - total flux cleaned = 0.000832399 Jy ! Component: 3650 - total flux cleaned = 0.000841407 Jy ! Component: 3700 - total flux cleaned = 0.000868312 Jy ! Component: 3750 - total flux cleaned = 0.000850619 Jy ! Component: 3800 - total flux cleaned = 0.000885961 Jy ! Component: 3850 - total flux cleaned = 0.000877197 Jy ! Component: 3900 - total flux cleaned = 0.00089462 Jy ! Component: 3950 - total flux cleaned = 0.000894663 Jy ! Component: 4000 - total flux cleaned = 0.000903258 Jy ! Component: 4050 - total flux cleaned = 0.00089464 Jy ! Total flux subtracted in 4096 components = 0.000911702 Jy ! Clean residual min=-0.000508 max=0.000547 Jy/beam ! Clean residual mean=0.000005 rms=0.000157 Jy/beam ! Combined flux in latest and established models = 0.21007 Jy keep ! Adding 311 model components to the UV plane model. ! The established model now contains 570 components and 0.21007 Jy ![Exited script file: muppet] wmap "J0143+4915_S_2015_03_17_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.292 x 4.799 at 82.56 degrees (North through East) ! Clean map min=-0.0010066 max=0.097208 Jy/beam ! Writing clean map to FITS file: J0143+4915_S_2015_03_17_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.097208 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000156768 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.483813 0.483813 0.967625 1.93525 3.8705 7.741 15.482 30.964 61.928 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.097 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.292 x 4.799 at 82.56 degrees (North through East) ! Clean map min=-0.0010066 max=0.097208 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0143+4915_S_2015_03_17_pus_uvs.log closed on Fri Dec 30 22:40:57 2016