! Started logfile: J0134-093A_S_2015_03_17_pus_uvs.log on Fri Dec 30 22:39:58 2016 obs J0134-093A_S_2015_03_17_pus_uva.fits ! Reading UV FITS file: J0134-093A_S_2015_03_17_pus_uva.fits ! AN table 1: 116 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.968774 visibilities/baseline/integration-bin. ! Found source: J0134-093A ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 330 lines of history. ! ! Reading 20228 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0134-093A_S_2015_03_17_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.955195Jy sigma=0.009779 ! Fit after self-cal, rms=0.923281Jy sigma=0.009460 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.697 mas, bmaj=6.518 mas, bpa=-4.429 degrees ! Estimated noise=784.943 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0528717 Jy ! Component: 100 - total flux cleaned = 0.078731 Jy ! Total flux subtracted in 100 components = 0.078731 Jy ! Clean residual min=-0.010911 max=0.017653 Jy/beam ! Clean residual mean=-0.000003 rms=0.003657 Jy/beam ! Combined flux in latest and established models = 0.078731 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 0.078731 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137841Jy sigma=0.001298 ! Fit after self-cal, rms=0.137408Jy sigma=0.001294 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.226 mas, bmaj=7.542 mas, bpa=-4.159 degrees ! Estimated noise=494.878 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0341734 Jy ! Component: 100 - total flux cleaned = 0.0538995 Jy ! Component: 150 - total flux cleaned = 0.0657436 Jy ! Component: 200 - total flux cleaned = 0.0730374 Jy ! Total flux subtracted in 200 components = 0.0730374 Jy ! Clean residual min=-0.015727 max=0.023923 Jy/beam ! Clean residual mean=0.000014 rms=0.005558 Jy/beam ! Combined flux in latest and established models = 0.151768 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 69 components and 0.151768 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127988Jy sigma=0.001201 ! Fit after self-cal, rms=0.127429Jy sigma=0.001196 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 0.65 HN 1.66 KP 1.50 ! LA 0.80 MK 0.72 NL 1.97 OV 1.02 ! PT 0.63 SC 1.41 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.68 HN 1.60 KP 1.37 ! LA 0.77 MK 0.77 NL 2.51 OV 1.25 ! PT 0.63 SC 1.91 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.83 HN 2.07 KP 0.95 ! LA 0.75 MK 0.79 NL 2.38 OV 0.81 ! PT 0.68 SC 1.38 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 1.07 HN 1.67 KP 1.14 ! LA 0.74 MK 0.92 NL 2.01 OV 1.02 ! PT 0.62 SC 1.45 ! ! ! Fit before self-cal, rms=0.127429Jy sigma=0.001196 ! Fit after self-cal, rms=0.166832Jy sigma=0.001095 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.313 mas, bmaj=8.183 mas, bpa=-8.493 degrees ! Estimated noise=515.635 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000693628 Jy ! Component: 100 - total flux cleaned = 0.000840204 Jy ! Component: 150 - total flux cleaned = 0.000971153 Jy ! Component: 200 - total flux cleaned = 0.00108843 Jy ! Total flux subtracted in 200 components = 0.00108843 Jy ! Clean residual min=-0.012494 max=0.022001 Jy/beam ! Clean residual mean=0.000006 rms=0.004478 Jy/beam ! Combined flux in latest and established models = 0.152857 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 70 components and 0.152857 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166744Jy sigma=0.001094 ! Fit after self-cal, rms=0.169611Jy sigma=0.001083 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169611Jy sigma=0.001083 ! Fit after self-cal, rms=0.202065Jy sigma=0.001059 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.165 mas, bmaj=8.318 mas, bpa=-9.284 degrees ! Estimated noise=487.618 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00152559 Jy ! Component: 100 - total flux cleaned = 0.00174079 Jy ! Component: 150 - total flux cleaned = 0.00195895 Jy ! Component: 200 - total flux cleaned = 0.00210565 Jy ! Total flux subtracted in 200 components = 0.00210565 Jy ! Clean residual min=-0.010940 max=0.017839 Jy/beam ! Clean residual mean=0.000008 rms=0.003965 Jy/beam ! Combined flux in latest and established models = 0.154962 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 73 components and 0.154962 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201933Jy sigma=0.001059 ! Fit after self-cal, rms=0.202874Jy sigma=0.001057 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-20, 65.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0161902 Jy ! Component: 100 - total flux cleaned = 0.0238842 Jy ! Component: 150 - total flux cleaned = 0.0270558 Jy ! Component: 200 - total flux cleaned = 0.0273575 Jy ! Total flux subtracted in 200 components = 0.0273575 Jy ! Clean residual min=-0.010200 max=0.017423 Jy/beam ! Clean residual mean=0.000004 rms=0.003648 Jy/beam ! Combined flux in latest and established models = 0.18232 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 116 components and 0.18232 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.200862Jy sigma=0.001037 ! Fit after self-cal, rms=0.199338Jy sigma=0.001029 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.199338Jy sigma=0.001029 ! Fit after self-cal, rms=0.181057Jy sigma=0.001022 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.103 mas, bmaj=8.256 mas, bpa=-9.075 degrees ! Estimated noise=456.987 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00824216 Jy ! Component: 100 - total flux cleaned = 0.0129288 Jy ! Component: 150 - total flux cleaned = 0.0141537 Jy ! Component: 200 - total flux cleaned = 0.0144862 Jy ! Total flux subtracted in 200 components = 0.0144862 Jy ! Clean residual min=-0.009182 max=0.014607 Jy/beam ! Clean residual mean=0.000017 rms=0.003188 Jy/beam ! Combined flux in latest and established models = 0.196806 Jy selfcal ! Performing phase self-cal ! Adding 62 model components to the UV plane model. ! The established model now contains 163 components and 0.196806 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180530Jy sigma=0.001013 ! Fit after self-cal, rms=0.179861Jy sigma=0.001010 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00463155 Jy ! Component: 100 - total flux cleaned = 0.00654259 Jy ! Component: 150 - total flux cleaned = 0.00672775 Jy ! Component: 200 - total flux cleaned = 0.0067264 Jy ! Total flux subtracted in 200 components = 0.0067264 Jy ! Clean residual min=-0.009164 max=0.013342 Jy/beam ! Clean residual mean=0.000015 rms=0.003103 Jy/beam ! Combined flux in latest and established models = 0.203533 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 185 components and 0.203533 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179610Jy sigma=0.001008 ! Fit after self-cal, rms=0.179327Jy sigma=0.001007 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179327Jy sigma=0.001007 ! Fit after self-cal, rms=0.172548Jy sigma=0.001004 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.777 mas, bmaj=13.59 mas, bpa=-3.118 degrees ! Estimated noise=600.099 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00610853 Jy ! Component: 100 - total flux cleaned = 0.00755084 Jy ! Component: 150 - total flux cleaned = 0.0088877 Jy ! Component: 200 - total flux cleaned = 0.0098897 Jy ! Total flux subtracted in 200 components = 0.0098897 Jy ! Clean residual min=-0.016978 max=0.023493 Jy/beam ! Clean residual mean=0.000048 rms=0.005745 Jy/beam ! Combined flux in latest and established models = 0.213422 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 212 components and 0.213422 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172559Jy sigma=0.001000 ! Fit after self-cal, rms=0.172054Jy sigma=0.000999 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00244504 Jy ! Component: 100 - total flux cleaned = 0.00294611 Jy ! Component: 150 - total flux cleaned = 0.00315129 Jy ! Component: 200 - total flux cleaned = 0.00343453 Jy ! Total flux subtracted in 200 components = 0.00343453 Jy ! Clean residual min=-0.016891 max=0.022137 Jy/beam ! Clean residual mean=0.000045 rms=0.005620 Jy/beam ! Combined flux in latest and established models = 0.216857 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 228 components and 0.216857 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172010Jy sigma=0.000998 ! Fit after self-cal, rms=0.171796Jy sigma=0.000997 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.078 mas, bmaj=8.248 mas, bpa=-9.304 degrees ! Estimated noise=447.262 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.078 x 8.248 at -9.304 degrees (North through East) ! Clean map min=-0.0090662 max=0.06419 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.566 mas, bmaj=7.235 mas, bpa=-9.605 degrees ! Estimated noise=695.943 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.048293 Jy ! Component: 100 - total flux cleaned = 0.0759658 Jy ! Component: 150 - total flux cleaned = 0.0951952 Jy ! Component: 200 - total flux cleaned = 0.11066 Jy ! Total flux subtracted in 200 components = 0.11066 Jy ! Clean residual min=-0.009769 max=0.011729 Jy/beam ! Clean residual mean=-0.000002 rms=0.002760 Jy/beam ! Combined flux in latest and established models = 0.11066 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 41 model components to the UV plane model. ! The established model now contains 41 components and 0.11066 Jy ! Inverting map and beam ! Estimated beam: bmin=3.078 mas, bmaj=8.248 mas, bpa=-9.304 degrees ! Estimated noise=447.262 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.023784 Jy ! Component: 100 - total flux cleaned = 0.0412833 Jy ! Component: 150 - total flux cleaned = 0.0546491 Jy ! Component: 200 - total flux cleaned = 0.0650972 Jy ! Total flux subtracted in 200 components = 0.0650972 Jy ! Clean residual min=-0.009486 max=0.012551 Jy/beam ! Clean residual mean=0.000012 rms=0.003287 Jy/beam ! Combined flux in latest and established models = 0.175757 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 99 components and 0.175757 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.777 mas, bmaj=13.59 mas, bpa=-3.118 degrees ! Estimated noise=600.099 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0160991 Jy ! Component: 100 - total flux cleaned = 0.0261547 Jy ! Component: 150 - total flux cleaned = 0.0312394 Jy ! Component: 200 - total flux cleaned = 0.033281 Jy ! Total flux subtracted in 200 components = 0.033281 Jy ! Clean residual min=-0.016153 max=0.021808 Jy/beam ! Clean residual mean=0.000038 rms=0.005724 Jy/beam ! Combined flux in latest and established models = 0.209038 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00177016 Jy ! Component: 100 - total flux cleaned = 0.00330655 Jy ! Component: 150 - total flux cleaned = 0.00435617 Jy ! Component: 200 - total flux cleaned = 0.00503179 Jy ! Total flux subtracted in 200 components = 0.00503179 Jy ! Clean residual min=-0.016393 max=0.021459 Jy/beam ! Clean residual mean=0.000040 rms=0.005618 Jy/beam ! Combined flux in latest and established models = 0.21407 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 153 components and 0.21407 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.078 mas, bmaj=8.248 mas, bpa=-9.304 degrees ! Estimated noise=447.262 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00120109 Jy ! Component: 100 - total flux cleaned = -0.000490245 Jy ! Component: 150 - total flux cleaned = -0.000389437 Jy ! Component: 200 - total flux cleaned = -0.000300639 Jy ! Total flux subtracted in 200 components = -0.000300639 Jy ! Clean residual min=-0.009134 max=0.011925 Jy/beam ! Clean residual mean=0.000017 rms=0.002877 Jy/beam ! Combined flux in latest and established models = 0.21377 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 167 components and 0.21377 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171782Jy sigma=0.000999 ! Fit after self-cal, rms=0.171545Jy sigma=0.000998 wmodel J0134-093A_S_2015_03_17_pus_map.mod ! Writing 167 model components to file: J0134-093A_S_2015_03_17_pus_map.mod wobs J0134-093A_S_2015_03_17_pus_uvs.fits ! Writing UV FITS file: J0134-093A_S_2015_03_17_pus_uvs.fits wwins J0134-093A_S_2015_03_17_pus_map.win ! wwins: Wrote 2 windows to J0134-093A_S_2015_03_17_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00506487 Jy ! Component: 100 - total flux cleaned = 0.00854601 Jy ! Component: 150 - total flux cleaned = 0.0109788 Jy ! Component: 200 - total flux cleaned = 0.0131422 Jy ! Component: 250 - total flux cleaned = 0.0150687 Jy ! Component: 300 - total flux cleaned = 0.0173499 Jy ! Component: 350 - total flux cleaned = 0.0192743 Jy ! Component: 400 - total flux cleaned = 0.0210018 Jy ! Component: 450 - total flux cleaned = 0.0224244 Jy ! Component: 500 - total flux cleaned = 0.0238095 Jy ! Component: 550 - total flux cleaned = 0.025279 Jy ! Component: 600 - total flux cleaned = 0.0264715 Jy ! Component: 650 - total flux cleaned = 0.027637 Jy ! Component: 700 - total flux cleaned = 0.0290049 Jy ! Component: 750 - total flux cleaned = 0.0300081 Jy ! Component: 800 - total flux cleaned = 0.0312085 Jy ! Component: 850 - total flux cleaned = 0.0321698 Jy ! Component: 900 - total flux cleaned = 0.0331125 Jy ! Component: 950 - total flux cleaned = 0.0340359 Jy ! Component: 1000 - total flux cleaned = 0.0347421 Jy ! Component: 1050 - total flux cleaned = 0.0356312 Jy ! Component: 1100 - total flux cleaned = 0.0363108 Jy ! Component: 1150 - total flux cleaned = 0.0368815 Jy ! Component: 1200 - total flux cleaned = 0.0372571 Jy ! Component: 1250 - total flux cleaned = 0.0377178 Jy ! Component: 1300 - total flux cleaned = 0.0379902 Jy ! Component: 1350 - total flux cleaned = 0.0387047 Jy ! Component: 1400 - total flux cleaned = 0.0388783 Jy ! Component: 1450 - total flux cleaned = 0.039226 Jy ! Component: 1500 - total flux cleaned = 0.0394822 Jy ! Component: 1550 - total flux cleaned = 0.0396503 Jy ! Component: 1600 - total flux cleaned = 0.0395672 Jy ! Component: 1650 - total flux cleaned = 0.0398982 Jy ! Component: 1700 - total flux cleaned = 0.040222 Jy ! Component: 1750 - total flux cleaned = 0.0403821 Jy ! Component: 1800 - total flux cleaned = 0.0405413 Jy ! Component: 1850 - total flux cleaned = 0.0409329 Jy ! Component: 1900 - total flux cleaned = 0.0410866 Jy ! Component: 1950 - total flux cleaned = 0.0412388 Jy ! Component: 2000 - total flux cleaned = 0.0416172 Jy ! Component: 2050 - total flux cleaned = 0.0416168 Jy ! Component: 2100 - total flux cleaned = 0.0417643 Jy ! Component: 2150 - total flux cleaned = 0.041837 Jy ! Component: 2200 - total flux cleaned = 0.041837 Jy ! Component: 2250 - total flux cleaned = 0.0416229 Jy ! Component: 2300 - total flux cleaned = 0.0418363 Jy ! Component: 2350 - total flux cleaned = 0.0417657 Jy ! Component: 2400 - total flux cleaned = 0.0417656 Jy ! Component: 2450 - total flux cleaned = 0.0418344 Jy ! Component: 2500 - total flux cleaned = 0.0417662 Jy ! Component: 2550 - total flux cleaned = 0.041698 Jy ! Component: 2600 - total flux cleaned = 0.0416307 Jy ! Component: 2650 - total flux cleaned = 0.0415652 Jy ! Component: 2700 - total flux cleaned = 0.0416311 Jy ! Component: 2750 - total flux cleaned = 0.0413711 Jy ! Component: 2800 - total flux cleaned = 0.0414348 Jy ! Component: 2850 - total flux cleaned = 0.0412434 Jy ! Component: 2900 - total flux cleaned = 0.0413693 Jy ! Component: 2950 - total flux cleaned = 0.041243 Jy ! Component: 3000 - total flux cleaned = 0.0411806 Jy ! Component: 3050 - total flux cleaned = 0.0413035 Jy ! Component: 3100 - total flux cleaned = 0.0411199 Jy ! Component: 3150 - total flux cleaned = 0.0411811 Jy ! Component: 3200 - total flux cleaned = 0.0412406 Jy ! Component: 3250 - total flux cleaned = 0.0410625 Jy ! Component: 3300 - total flux cleaned = 0.0410042 Jy ! Component: 3350 - total flux cleaned = 0.041356 Jy ! Component: 3400 - total flux cleaned = 0.0411812 Jy ! Component: 3450 - total flux cleaned = 0.0412388 Jy ! Component: 3500 - total flux cleaned = 0.0412961 Jy ! Component: 3550 - total flux cleaned = 0.0412398 Jy ! Component: 3600 - total flux cleaned = 0.0411274 Jy ! Component: 3650 - total flux cleaned = 0.0410712 Jy ! Component: 3700 - total flux cleaned = 0.0410716 Jy ! Component: 3750 - total flux cleaned = 0.041071 Jy ! Component: 3800 - total flux cleaned = 0.0410155 Jy ! Component: 3850 - total flux cleaned = 0.0410157 Jy ! Component: 3900 - total flux cleaned = 0.0411771 Jy ! Component: 3950 - total flux cleaned = 0.0410696 Jy ! Component: 4000 - total flux cleaned = 0.0411228 Jy ! Component: 4050 - total flux cleaned = 0.0411759 Jy ! Total flux subtracted in 4096 components = 0.041123 Jy ! Clean residual min=-0.002990 max=0.002772 Jy/beam ! Clean residual mean=0.000007 rms=0.001162 Jy/beam ! Combined flux in latest and established models = 0.254893 Jy keep ! Adding 586 model components to the UV plane model. ! The established model now contains 753 components and 0.254893 Jy ![Exited script file: muppet] wmap "J0134-093A_S_2015_03_17_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.078 x 8.248 at -9.304 degrees (North through East) ! Clean map min=-0.0067104 max=0.06403 Jy/beam ! Writing clean map to FITS file: J0134-093A_S_2015_03_17_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0640296 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00112665 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -5.27871 5.27871 10.5574 21.1148 42.2297 84.4594 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0033 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.064 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.078 x 8.248 at -9.304 degrees (North through East) ! Clean map min=-0.0067104 max=0.06403 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0134-093A_S_2015_03_17_pus_uvs.log closed on Fri Dec 30 22:40:06 2016