! Started logfile: J0106-4034_S_2015_03_17_pus_uvs.log on Fri Dec 30 22:38:49 2016 obs J0106-4034_S_2015_03_17_pus_uva.fits ! Reading UV FITS file: J0106-4034_S_2015_03_17_pus_uva.fits ! AN table 1: 14 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.133333 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0106-4034 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 330 lines of history. ! ! Reading 336 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0106-4034_S_2015_03_17_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 102 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 102 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.495582Jy sigma=0.002941 ! Fit after self-cal, rms=0.494902Jy sigma=0.002906 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=13.44 mas, bmaj=131.5 mas, bpa=17.74 degrees ! Estimated noise=12080.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.632705 Jy ! Component: 100 - total flux cleaned = 0.642653 Jy ! Total flux subtracted in 100 components = 0.642653 Jy ! Clean residual min=-0.118862 max=0.114747 Jy/beam ! Clean residual mean=-0.001266 rms=0.043799 Jy/beam ! Combined flux in latest and established models = 0.642653 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.642653 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.482078Jy sigma=0.001414 ! Fit after self-cal, rms=0.481577Jy sigma=0.001411 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=12.86 mas, bmaj=155.1 mas, bpa=18.14 degrees ! Estimated noise=6855.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.093164 Jy ! Component: 100 - total flux cleaned = -0.107782 Jy ! Component: 150 - total flux cleaned = -0.108963 Jy ! Component: 200 - total flux cleaned = -0.094915 Jy ! Total flux subtracted in 200 components = -0.094915 Jy ! Clean residual min=-0.124475 max=0.120544 Jy/beam ! Clean residual mean=-0.000298 rms=0.034487 Jy/beam ! Combined flux in latest and established models = 0.547738 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 36 components and 0.547738 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.328523Jy sigma=0.001214 ! Fit after self-cal, rms=0.323652Jy sigma=0.001108 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.65 HN 1.00* KP 1.18 ! LA 1.11 MK 1.00* NL 1.00* OV 0.98 ! PT 1.03 SC 1.00* ! ! ! Correcting IF 2. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.12 ! LA 1.08 MK 1.00* NL 1.00* OV 0.94 ! PT 1.08 SC 1.00* ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.00* KP 0.97 ! LA 0.95 MK 1.00* NL 1.00* OV 0.87 ! PT 1.05 SC 1.00* ! ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.95 ! LA 1.14 MK 1.00* NL 1.00* OV 0.90 ! PT 0.92 SC 1.00* ! ! ! Fit before self-cal, rms=0.323652Jy sigma=0.001108 ! Fit after self-cal, rms=0.200063Jy sigma=0.000814 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=12.14 mas, bmaj=153.5 mas, bpa=18.58 degrees ! Estimated noise=8584.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0400518 Jy ! Component: 100 - total flux cleaned = 0.0399705 Jy ! Component: 150 - total flux cleaned = 0.0419386 Jy ! Component: 200 - total flux cleaned = 0.0441087 Jy ! Total flux subtracted in 200 components = 0.0441087 Jy ! Clean residual min=-0.018139 max=0.018632 Jy/beam ! Clean residual mean=-0.000090 rms=0.006379 Jy/beam ! Combined flux in latest and established models = 0.591847 Jy ! Performing phase self-cal ! Adding 60 model components to the UV plane model. ! The established model now contains 96 components and 0.591847 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.177695Jy sigma=0.000736 ! Fit after self-cal, rms=0.175224Jy sigma=0.000731 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175224Jy sigma=0.000731 ! Fit after self-cal, rms=0.170423Jy sigma=0.000724 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=12.19 mas, bmaj=152.6 mas, bpa=18.58 degrees ! Estimated noise=8610.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000739352 Jy ! Component: 100 - total flux cleaned = 0.00285327 Jy ! Component: 150 - total flux cleaned = 0.00237855 Jy ! Component: 200 - total flux cleaned = 0.00175858 Jy ! Total flux subtracted in 200 components = 0.00175858 Jy ! Clean residual min=-0.010018 max=0.010483 Jy/beam ! Clean residual mean=-0.000138 rms=0.003806 Jy/beam ! Combined flux in latest and established models = 0.593606 Jy selfcal ! Performing phase self-cal ! Adding 59 model components to the UV plane model. ! The established model now contains 151 components and 0.593606 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166961Jy sigma=0.000711 ! Fit after self-cal, rms=0.166828Jy sigma=0.000710 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000825327 Jy ! Component: 100 - total flux cleaned = -0.000549856 Jy ! Component: 150 - total flux cleaned = 1.79001e-05 Jy ! Component: 200 - total flux cleaned = 0.001147 Jy ! Total flux subtracted in 200 components = 0.001147 Jy ! Clean residual min=-0.004946 max=0.004975 Jy/beam ! Clean residual mean=-0.000168 rms=0.002169 Jy/beam ! Combined flux in latest and established models = 0.594752 Jy ! Performing phase self-cal ! Adding 79 model components to the UV plane model. ! The established model now contains 230 components and 0.594753 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165335Jy sigma=0.000702 ! Fit after self-cal, rms=0.165261Jy sigma=0.000702 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165261Jy sigma=0.000702 ! Fit after self-cal, rms=0.162487Jy sigma=0.000700 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=12.18 mas, bmaj=152.4 mas, bpa=18.59 degrees ! Estimated noise=8582.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00151551 Jy ! Component: 100 - total flux cleaned = 8.99785e-05 Jy ! Component: 150 - total flux cleaned = 0.00072462 Jy ! Component: 200 - total flux cleaned = 0.000929123 Jy ! Total flux subtracted in 200 components = 0.000929123 Jy ! Clean residual min=-0.003347 max=0.003323 Jy/beam ! Clean residual mean=-0.000047 rms=0.001476 Jy/beam ! Combined flux in latest and established models = 0.595682 Jy selfcal ! Performing phase self-cal ! Adding 81 model components to the UV plane model. ! The established model now contains 305 components and 0.595682 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161711Jy sigma=0.000695 ! Fit after self-cal, rms=0.161642Jy sigma=0.000695 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000242405 Jy ! Component: 100 - total flux cleaned = -0.00111924 Jy ! Component: 150 - total flux cleaned = -0.00193924 Jy ! Component: 200 - total flux cleaned = -0.00272237 Jy ! Total flux subtracted in 200 components = -0.00272237 Jy ! Clean residual min=-0.002553 max=0.002556 Jy/beam ! Clean residual mean=-0.000059 rms=0.001202 Jy/beam ! Combined flux in latest and established models = 0.592959 Jy ! Performing phase self-cal ! Adding 78 model components to the UV plane model. ! The established model now contains 378 components and 0.592959 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161236Jy sigma=0.000693 ! Fit after self-cal, rms=0.161261Jy sigma=0.000693 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161261Jy sigma=0.000693 ! Fit after self-cal, rms=0.160105Jy sigma=0.000692 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=12.74 mas, bmaj=149.6 mas, bpa=18.5 degrees ! Estimated noise=8538.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000510284 Jy ! Component: 100 - total flux cleaned = -0.00179352 Jy ! Component: 150 - total flux cleaned = -0.00314272 Jy ! Component: 200 - total flux cleaned = -0.00328305 Jy ! Total flux subtracted in 200 components = -0.00328305 Jy ! Clean residual min=-0.002438 max=0.002439 Jy/beam ! Clean residual mean=-0.000064 rms=0.001061 Jy/beam ! Combined flux in latest and established models = 0.589676 Jy selfcal ! Performing phase self-cal ! Adding 87 model components to the UV plane model. ! The established model now contains 458 components and 0.589676 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159793Jy sigma=0.000690 ! Fit after self-cal, rms=0.159784Jy sigma=0.000690 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00102342 Jy ! Component: 100 - total flux cleaned = -0.00141545 Jy ! Component: 150 - total flux cleaned = -0.00215263 Jy ! Component: 200 - total flux cleaned = -0.00227203 Jy ! Total flux subtracted in 200 components = -0.00227203 Jy ! Clean residual min=-0.001907 max=0.001899 Jy/beam ! Clean residual mean=-0.000048 rms=0.000893 Jy/beam ! Combined flux in latest and established models = 0.587404 Jy ! Performing phase self-cal ! Adding 69 model components to the UV plane model. ! The established model now contains 515 components and 0.587404 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159558Jy sigma=0.000689 ! Fit after self-cal, rms=0.159580Jy sigma=0.000689 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=12.18 mas, bmaj=152.2 mas, bpa=18.59 degrees ! Estimated noise=8578.6 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 12.18 x 152.2 at 18.59 degrees (North through East) ! Clean map min=-0.19609 max=0.71259 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159580Jy sigma=0.000689 ! Fit after self-cal, rms=0.131043Jy sigma=0.000535 ! Inverting map and beam ! Estimated beam: bmin=12.17 mas, bmaj=152.1 mas, bpa=18.58 degrees ! Estimated noise=8575 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00236487 Jy ! Component: 100 - total flux cleaned = -0.00235886 Jy ! Component: 150 - total flux cleaned = -0.00235774 Jy ! Component: 200 - total flux cleaned = -0.00271518 Jy ! Total flux subtracted in 200 components = -0.00271518 Jy ! Clean residual min=-0.003235 max=0.003287 Jy/beam ! Clean residual mean=-0.000087 rms=0.001314 Jy/beam ! Combined flux in latest and established models = 0.584689 Jy ! Performing phase self-cal ! Adding 91 model components to the UV plane model. ! The established model now contains 602 components and 0.584689 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130370Jy sigma=0.000532 ! Fit after self-cal, rms=0.130385Jy sigma=0.000532 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000764491 Jy ! Component: 100 - total flux cleaned = -0.000640674 Jy ! Component: 150 - total flux cleaned = -0.000242251 Jy ! Component: 200 - total flux cleaned = 0.000517782 Jy ! Total flux subtracted in 200 components = 0.000517782 Jy ! Clean residual min=-0.002045 max=0.002059 Jy/beam ! Clean residual mean=-0.000016 rms=0.000998 Jy/beam ! Combined flux in latest and established models = 0.585207 Jy ! Performing phase self-cal ! Adding 83 model components to the UV plane model. ! The established model now contains 674 components and 0.585207 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129986Jy sigma=0.000530 ! Fit after self-cal, rms=0.129984Jy sigma=0.000530 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129984Jy sigma=0.000530 ! Fit after self-cal, rms=0.129007Jy sigma=0.000529 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=13.05 mas, bmaj=131.8 mas, bpa=18.1 degrees ! Estimated noise=13143.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.604385 Jy ! Component: 100 - total flux cleaned = 0.654109 Jy ! Component: 150 - total flux cleaned = 0.626751 Jy ! Component: 200 - total flux cleaned = 0.616521 Jy ! Total flux subtracted in 200 components = 0.616521 Jy ! Clean residual min=-0.086754 max=0.089698 Jy/beam ! Clean residual mean=-0.000183 rms=0.027188 Jy/beam ! Combined flux in latest and established models = 0.616521 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 36 model components to the UV plane model. ! The established model now contains 36 components and 0.616521 Jy ! Inverting map and beam ! Estimated beam: bmin=12.17 mas, bmaj=152 mas, bpa=18.58 degrees ! Estimated noise=8568.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0299378 Jy ! Component: 100 - total flux cleaned = -0.0298776 Jy ! Component: 150 - total flux cleaned = -0.0237505 Jy ! Component: 200 - total flux cleaned = -0.0127663 Jy ! Total flux subtracted in 200 components = -0.0127663 Jy ! Clean residual min=-0.067440 max=0.069025 Jy/beam ! Clean residual mean=-0.001056 rms=0.017511 Jy/beam ! Combined flux in latest and established models = 0.603755 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 61 components and 0.603755 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=12.72 mas, bmaj=149.4 mas, bpa=18.49 degrees ! Estimated noise=8530.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0358753 Jy ! Component: 100 - total flux cleaned = 0.0422202 Jy ! Component: 150 - total flux cleaned = 0.0433508 Jy ! Component: 200 - total flux cleaned = 0.0403826 Jy ! Total flux subtracted in 200 components = 0.0403826 Jy ! Clean residual min=-0.025662 max=0.026358 Jy/beam ! Clean residual mean=-0.000479 rms=0.008438 Jy/beam ! Combined flux in latest and established models = 0.644137 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00545285 Jy ! Component: 100 - total flux cleaned = -0.0121658 Jy ! Component: 150 - total flux cleaned = -0.0204414 Jy ! Component: 200 - total flux cleaned = -0.0348866 Jy ! Total flux subtracted in 200 components = -0.0348866 Jy ! Clean residual min=-0.065632 max=0.067996 Jy/beam ! Clean residual mean=-0.000275 rms=0.018397 Jy/beam ! Combined flux in latest and established models = 0.609251 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 97 components and 0.609251 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=12.17 mas, bmaj=152 mas, bpa=18.58 degrees ! Estimated noise=8568.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00386298 Jy ! Component: 100 - total flux cleaned = 0.00452181 Jy ! Component: 150 - total flux cleaned = 0.0117 Jy ! Component: 200 - total flux cleaned = 0.0207199 Jy ! Total flux subtracted in 200 components = 0.0207199 Jy ! Clean residual min=-0.054336 max=0.053846 Jy/beam ! Clean residual mean=0.000111 rms=0.011488 Jy/beam ! Combined flux in latest and established models = 0.629971 Jy selfcal ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 133 components and 0.629971 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138348Jy sigma=0.000627 ! Fit after self-cal, rms=0.136141Jy sigma=0.000615 wmodel J0106-4034_S_2015_03_17_pus_map.mod ! Writing 133 model components to file: J0106-4034_S_2015_03_17_pus_map.mod wobs J0106-4034_S_2015_03_17_pus_uvs.fits ! Writing UV FITS file: J0106-4034_S_2015_03_17_pus_uvs.fits wwins J0106-4034_S_2015_03_17_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J0106-4034_S_2015_03_17_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 12.17 x 152 at 18.58 degrees (North through East) ! Clean map min=-0.18968 max=0.57449 Jy/beam ! Writing clean map to FITS file: J0106-4034_S_2015_03_17_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.57449 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00775608 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -4.05024 4.05024 8.10048 16.201 32.4019 64.8039 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0232 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.574 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 12.17 x 152 at 18.58 degrees (North through East) ! Clean map min=-0.18968 max=0.57449 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0106-4034_S_2015_03_17_pus_uvs.log closed on Fri Dec 30 22:39:00 2016