! Started logfile: J2212+3308_X_2014_12_20_pus_uvs.log on Tue Dec 27 21:51:56 2016
obs J2212+3308_X_2014_12_20_pus_uva.fits
! Reading UV FITS file: J2212+3308_X_2014_12_20_pus_uva.fits
! AN table 1: 95 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.872749 visibilities/baseline/integration-bin.
! Found source: J2212+3308
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.44388e+09      3.2e+07          1      3.2e+07
!  02        2  8.47588e+09      3.2e+07          1      3.2e+07
!  03        3  8.50788e+09      3.2e+07          1      3.2e+07
!  04        4  8.53988e+09      3.2e+07          1      3.2e+07
!  05        5  8.60388e+09      3.2e+07          1      3.2e+07
!  06        6  8.63588e+09      3.2e+07          1      3.2e+07
!  07        7  8.69988e+09      3.2e+07          1      3.2e+07
!  08        8  8.73188e+09      3.2e+07          1      3.2e+07
!  09        9  8.79588e+09      3.2e+07          1      3.2e+07
!  10       10  8.82788e+09      3.2e+07          1      3.2e+07
!  11       11  8.85988e+09      3.2e+07          1      3.2e+07
!  12       12  8.89188e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 364 lines of history.
! 
! Reading 44772 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@muppet J2212+3308_X_2014_12_20_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.940186Jy  sigma=0.011370
! Fit after  self-cal, rms=0.926135Jy  sigma=0.011216
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7824 mas, bmaj=1.362 mas, bpa=-2.467 degrees
! Estimated noise=548.115 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0570349 Jy
! Component: 100  -  total flux cleaned = 0.0734517 Jy
! Total flux subtracted in 100 components = 0.0734517 Jy
! Clean residual min=-0.003740 max=0.009830 Jy/beam
! Clean residual mean=-0.000061 rms=0.001205 Jy/beam
! Combined flux in latest and established models = 0.0734516 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.0734516 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075004Jy  sigma=0.000816
! Fit after  self-cal, rms=0.074997Jy  sigma=0.000816
! Inverting map 
! Added new window around map position (1.2, 0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0101166 Jy
! Component: 100  -  total flux cleaned = 0.0162515 Jy
! Total flux subtracted in 100 components = 0.0162515 Jy
! Clean residual min=-0.002645 max=0.003509 Jy/beam
! Clean residual mean=-0.000031 rms=0.000751 Jy/beam
! Combined flux in latest and established models = 0.0897031 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 22 components and 0.0897031 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073475Jy  sigma=0.000790
! Fit after  self-cal, rms=0.073418Jy  sigma=0.000789
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00464145 Jy
! Component: 100  -  total flux cleaned = 0.00758834 Jy
! Total flux subtracted in 100 components = 0.00758834 Jy
! Clean residual min=-0.001980 max=0.002324 Jy/beam
! Clean residual mean=-0.000017 rms=0.000580 Jy/beam
! Combined flux in latest and established models = 0.0972914 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 27 components and 0.0972914 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073110Jy  sigma=0.000784
! Fit after  self-cal, rms=0.073108Jy  sigma=0.000784
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9545 mas, bmaj=1.645 mas, bpa=-2.363 degrees
! Estimated noise=281.797 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00285479 Jy
! Component: 100  -  total flux cleaned = 0.00460841 Jy
! Component: 150  -  total flux cleaned = 0.0057936 Jy
! Component: 200  -  total flux cleaned = 0.00660507 Jy
! Total flux subtracted in 200 components = 0.00660507 Jy
! Clean residual min=-0.001464 max=0.001738 Jy/beam
! Clean residual mean=-0.000019 rms=0.000425 Jy/beam
! Combined flux in latest and established models = 0.103897 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 46 components and 0.103897 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072997Jy  sigma=0.000782
! Fit after  self-cal, rms=0.073001Jy  sigma=0.000782
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        1.04     KP        1.06     
!   LA        0.97     MK        0.91     NL        0.96     OV        0.97     
!   PT        1.04     SC        1.05     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.02     HN        1.05     KP        1.04     
!   LA        0.98     MK        0.97     NL        0.98     OV        0.94     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.04     HN        1.05     KP        1.01     
!   LA        1.00     MK        0.95     NL        1.00     OV        0.94     
!   PT        0.91     SC        1.07     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.03     KP        0.95     
!   LA        0.98     MK        0.99     NL        0.97     OV        0.96     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        0.95     KP        0.91     
!   LA        1.00     MK        0.99     NL        1.01     OV        0.95     
!   PT        0.96     SC        1.06     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.06     HN        1.01     KP        0.89     
!   LA        0.98     MK        0.96     NL        1.00     OV        0.97     
!   PT        0.94     SC        1.08     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.17     HN        1.15     KP        0.89     
!   LA        0.99     MK        1.01     NL        1.05     OV        1.02     
!   PT        1.02     SC        1.06     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.08     HN        1.04     KP        0.93     
!   LA        0.99     MK        0.95     NL        0.99     OV        0.97     
!   PT        0.96     SC        1.05     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.07     HN        1.06     KP        0.90     
!   LA        0.97     MK        0.93     NL        0.96     OV        1.04     
!   PT        1.02     SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.09     HN        1.03     KP        0.98     
!   LA        1.04     MK        0.92     NL        1.00     OV        0.93     
!   PT        0.98     SC        1.03     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.02     HN        1.00     KP        0.98     
!   LA        1.01     MK        0.99     NL        0.98     OV        1.02     
!   PT        0.97     SC        1.07     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.10     HN        0.99     KP        1.00     
!   LA        1.02     MK        1.02     NL        1.00     OV        0.97     
!   PT        0.99     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.073001Jy  sigma=0.000782
! Fit after  self-cal, rms=0.073330Jy  sigma=0.000779
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9541 mas, bmaj=1.651 mas, bpa=-2.972 degrees
! Estimated noise=280.437 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.75556e-05 Jy
! Component: 100  -  total flux cleaned = 3.56366e-05 Jy
! Component: 150  -  total flux cleaned = 5.16613e-05 Jy
! Component: 200  -  total flux cleaned = 7.54141e-05 Jy
! Total flux subtracted in 200 components = 7.54141e-05 Jy
! Clean residual min=-0.001142 max=0.001299 Jy/beam
! Clean residual mean=-0.000004 rms=0.000324 Jy/beam
! Combined flux in latest and established models = 0.103972 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 54 components and 0.103972 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073318Jy  sigma=0.000779
! Fit after  self-cal, rms=0.073343Jy  sigma=0.000778
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073343Jy  sigma=0.000778
! Fit after  self-cal, rms=0.074133Jy  sigma=0.000777
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9527 mas, bmaj=1.649 mas, bpa=-2.662 degrees
! Estimated noise=280.067 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.49095e-05 Jy
! Component: 100  -  total flux cleaned = -3.02185e-05 Jy
! Component: 150  -  total flux cleaned = -3.1307e-05 Jy
! Component: 200  -  total flux cleaned = -4.10312e-05 Jy
! Total flux subtracted in 200 components = -4.10312e-05 Jy
! Clean residual min=-0.000948 max=0.000926 Jy/beam
! Clean residual mean=-0.000012 rms=0.000256 Jy/beam
! Combined flux in latest and established models = 0.103931 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 60 components and 0.103931 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074128Jy  sigma=0.000777
! Fit after  self-cal, rms=0.074148Jy  sigma=0.000777
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.17552e-05 Jy
! Component: 100  -  total flux cleaned = 2.28013e-05 Jy
! Component: 150  -  total flux cleaned = 1.42257e-05 Jy
! Component: 200  -  total flux cleaned = -2.05312e-06 Jy
! Total flux subtracted in 200 components = -2.05312e-06 Jy
! Clean residual min=-0.000942 max=0.000907 Jy/beam
! Clean residual mean=-0.000012 rms=0.000253 Jy/beam
! Combined flux in latest and established models = 0.103929 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 63 components and 0.103929 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074146Jy  sigma=0.000777
! Fit after  self-cal, rms=0.074145Jy  sigma=0.000777
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074145Jy  sigma=0.000777
! Fit after  self-cal, rms=0.074314Jy  sigma=0.000777
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9514 mas, bmaj=1.649 mas, bpa=-2.628 degrees
! Estimated noise=279.839 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.83497e-05 Jy
! Component: 100  -  total flux cleaned = 7.82275e-05 Jy
! Component: 150  -  total flux cleaned = 6.93816e-05 Jy
! Component: 200  -  total flux cleaned = 6.12212e-05 Jy
! Total flux subtracted in 200 components = 6.12212e-05 Jy
! Clean residual min=-0.000903 max=0.000885 Jy/beam
! Clean residual mean=-0.000012 rms=0.000248 Jy/beam
! Combined flux in latest and established models = 0.10399 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 63 components and 0.10399 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074311Jy  sigma=0.000777
! Fit after  self-cal, rms=0.074315Jy  sigma=0.000777
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.17604e-05 Jy
! Component: 100  -  total flux cleaned = 6.02258e-06 Jy
! Component: 150  -  total flux cleaned = -1.17673e-06 Jy
! Component: 200  -  total flux cleaned = -7.91012e-06 Jy
! Total flux subtracted in 200 components = -7.91012e-06 Jy
! Clean residual min=-0.000902 max=0.000865 Jy/beam
! Clean residual mean=-0.000012 rms=0.000247 Jy/beam
! Combined flux in latest and established models = 0.103982 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 64 components and 0.103982 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074313Jy  sigma=0.000777
! Fit after  self-cal, rms=0.074313Jy  sigma=0.000777
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074313Jy  sigma=0.000777
! Fit after  self-cal, rms=0.074386Jy  sigma=0.000777
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.137 mas, bmaj=2.749 mas, bpa=-1.446 degrees
! Estimated noise=337.492 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000479874 Jy
! Component: 100  -  total flux cleaned = 0.000491625 Jy
! Component: 150  -  total flux cleaned = 0.000483171 Jy
! Component: 200  -  total flux cleaned = 0.000475502 Jy
! Total flux subtracted in 200 components = 0.000475502 Jy
! Clean residual min=-0.000978 max=0.001129 Jy/beam
! Clean residual mean=-0.000026 rms=0.000301 Jy/beam
! Combined flux in latest and established models = 0.104458 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 67 components and 0.104458 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074386Jy  sigma=0.000777
! Fit after  self-cal, rms=0.074386Jy  sigma=0.000777
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.88006e-05 Jy
! Component: 100  -  total flux cleaned = 4.92797e-05 Jy
! Component: 150  -  total flux cleaned = 4.98886e-05 Jy
! Component: 200  -  total flux cleaned = 5.59604e-05 Jy
! Total flux subtracted in 200 components = 5.59604e-05 Jy
! Clean residual min=-0.000970 max=0.001099 Jy/beam
! Clean residual mean=-0.000026 rms=0.000299 Jy/beam
! Combined flux in latest and established models = 0.104514 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 69 components and 0.104514 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074387Jy  sigma=0.000777
! Fit after  self-cal, rms=0.074386Jy  sigma=0.000777
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9503 mas, bmaj=1.648 mas, bpa=-2.612 degrees
! Estimated noise=279.691 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9503 x 1.648 at -2.612 degrees (North through East)
! Clean map  min=-0.00083686  max=0.074504 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7802 mas, bmaj=1.364 mas, bpa=-2.908 degrees
! Estimated noise=542.371 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0559918 Jy
! Component: 100  -  total flux cleaned = 0.0736628 Jy
! Component: 150  -  total flux cleaned = 0.0841833 Jy
! Component: 200  -  total flux cleaned = 0.0906184 Jy
! Total flux subtracted in 200 components = 0.0906184 Jy
! Clean residual min=-0.002090 max=0.003348 Jy/beam
! Clean residual mean=-0.000032 rms=0.000618 Jy/beam
! Combined flux in latest and established models = 0.0906184 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.0906184 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9503 mas, bmaj=1.648 mas, bpa=-2.612 degrees
! Estimated noise=279.691 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00519533 Jy
! Component: 100  -  total flux cleaned = 0.00817281 Jy
! Component: 150  -  total flux cleaned = 0.0100448 Jy
! Component: 200  -  total flux cleaned = 0.0112873 Jy
! Total flux subtracted in 200 components = 0.0112873 Jy
! Clean residual min=-0.000975 max=0.001124 Jy/beam
! Clean residual mean=-0.000017 rms=0.000268 Jy/beam
! Combined flux in latest and established models = 0.101906 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 47 components and 0.101906 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.137 mas, bmaj=2.749 mas, bpa=-1.446 degrees
! Estimated noise=337.492 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00145239 Jy
! Component: 100  -  total flux cleaned = 0.00206977 Jy
! Component: 150  -  total flux cleaned = 0.00236511 Jy
! Component: 200  -  total flux cleaned = 0.0024356 Jy
! Total flux subtracted in 200 components = 0.0024356 Jy
! Clean residual min=-0.001019 max=0.001048 Jy/beam
! Clean residual mean=-0.000026 rms=0.000298 Jy/beam
! Combined flux in latest and established models = 0.104341 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.4195e-05 Jy
! Component: 100  -  total flux cleaned = 4.70407e-05 Jy
! Component: 150  -  total flux cleaned = 6.3038e-05 Jy
! Component: 200  -  total flux cleaned = 8.34242e-05 Jy
! Total flux subtracted in 200 components = 8.34242e-05 Jy
! Clean residual min=-0.001010 max=0.001045 Jy/beam
! Clean residual mean=-0.000026 rms=0.000297 Jy/beam
! Combined flux in latest and established models = 0.104425 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 58 components and 0.104425 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9503 mas, bmaj=1.648 mas, bpa=-2.612 degrees
! Estimated noise=279.691 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000179067 Jy
! Component: 100  -  total flux cleaned = -0.000179283 Jy
! Component: 150  -  total flux cleaned = -0.000193997 Jy
! Component: 200  -  total flux cleaned = -0.000193753 Jy
! Total flux subtracted in 200 components = -0.000193753 Jy
! Clean residual min=-0.000917 max=0.000871 Jy/beam
! Clean residual mean=-0.000011 rms=0.000248 Jy/beam
! Combined flux in latest and established models = 0.104231 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 63 components and 0.104231 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074391Jy  sigma=0.000777
! Fit after  self-cal, rms=0.074390Jy  sigma=0.000777
wmodel J2212+3308_X_2014_12_20_pus_map.mod
! Writing 63 model components to file: J2212+3308_X_2014_12_20_pus_map.mod
wobs J2212+3308_X_2014_12_20_pus_uvs.fits
! Writing UV FITS file: J2212+3308_X_2014_12_20_pus_uvs.fits
wwins J2212+3308_X_2014_12_20_pus_map.win
! wwins: Wrote 2 windows to J2212+3308_X_2014_12_20_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000260383 Jy
! Component: 100  -  total flux cleaned = -0.000245609 Jy
! Component: 150  -  total flux cleaned = -0.000215633 Jy
! Component: 200  -  total flux cleaned = -0.000229953 Jy
! Component: 250  -  total flux cleaned = -0.000257655 Jy
! Component: 300  -  total flux cleaned = -0.000270912 Jy
! Component: 350  -  total flux cleaned = -0.000231956 Jy
! Component: 400  -  total flux cleaned = -0.000231965 Jy
! Component: 450  -  total flux cleaned = -0.000231928 Jy
! Component: 500  -  total flux cleaned = -0.000256202 Jy
! Component: 550  -  total flux cleaned = -0.000256284 Jy
! Component: 600  -  total flux cleaned = -0.000279348 Jy
! Component: 650  -  total flux cleaned = -0.000313077 Jy
! Component: 700  -  total flux cleaned = -0.00033497 Jy
! Component: 750  -  total flux cleaned = -0.000356784 Jy
! Component: 800  -  total flux cleaned = -0.000399574 Jy
! Component: 850  -  total flux cleaned = -0.000410154 Jy
! Component: 900  -  total flux cleaned = -0.000451422 Jy
! Component: 950  -  total flux cleaned = -0.000431034 Jy
! Component: 1000  -  total flux cleaned = -0.00043103 Jy
! Component: 1050  -  total flux cleaned = -0.000431184 Jy
! Component: 1100  -  total flux cleaned = -0.000450813 Jy
! Component: 1150  -  total flux cleaned = -0.000470075 Jy
! Component: 1200  -  total flux cleaned = -0.000451116 Jy
! Component: 1250  -  total flux cleaned = -0.00046979 Jy
! Component: 1300  -  total flux cleaned = -0.000469662 Jy
! Component: 1350  -  total flux cleaned = -0.000460649 Jy
! Component: 1400  -  total flux cleaned = -0.000496374 Jy
! Component: 1450  -  total flux cleaned = -0.000504968 Jy
! Component: 1500  -  total flux cleaned = -0.000487558 Jy
! Component: 1550  -  total flux cleaned = -0.000504887 Jy
! Component: 1600  -  total flux cleaned = -0.000530463 Jy
! Component: 1650  -  total flux cleaned = -0.000530409 Jy
! Component: 1700  -  total flux cleaned = -0.000547089 Jy
! Component: 1750  -  total flux cleaned = -0.000538805 Jy
! Component: 1800  -  total flux cleaned = -0.00056301 Jy
! Component: 1850  -  total flux cleaned = -0.000530814 Jy
! Component: 1900  -  total flux cleaned = -0.000538865 Jy
! Component: 1950  -  total flux cleaned = -0.000523111 Jy
! Component: 2000  -  total flux cleaned = -0.000499701 Jy
! Total flux subtracted in 2048 components = -0.00047667 Jy
! Clean residual min=-0.000412 max=0.000423 Jy/beam
! Clean residual mean=-0.000002 rms=0.000140 Jy/beam
! Combined flux in latest and established models = 0.103754 Jy
keep
! Adding 145 model components to the UV plane model.
! The established model now contains 208 components and 0.103754 Jy
![Exited script file: muppet]
wmap "J2212+3308_X_2014_12_20_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9503 x 1.648 at -2.612 degrees (North through East)
! Clean map  min=-0.00077676  max=0.074503 Jy/beam
! Writing clean map to FITS file: J2212+3308_X_2014_12_20_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0745026 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000139739 
device "J2212+3308_X_2014_12_20_pus\_map.eps/VPS"
! Attempting to open device: 'J2212+3308_X_2014_12_20_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.562686 0.562686 1.12537 2.25074 4.50149 9.00297 18.0059 36.0119 72.0238
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0004 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.074 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9503 x 1.648 at -2.612 degrees (North through East)
! Clean map  min=-0.00077676  max=0.074503 Jy/beam
quit
! Quitting program
! Log file J2212+3308_X_2014_12_20_pus_uvs.log closed on Tue Dec 27 21:51:59 2016