! Started logfile: J2139+1423_X_2014_12_20_pus_uvs.log on Tue Dec 27 21:51:22 2016
obs J2139+1423_X_2014_12_20_pus_uva.fits
! Reading UV FITS file: J2139+1423_X_2014_12_20_pus_uva.fits
! AN table 1: 29 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.905747 visibilities/baseline/integration-bin.
! Found source: J2139+1423
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.44388e+09      3.2e+07          1      3.2e+07
!  02        2  8.47588e+09      3.2e+07          1      3.2e+07
!  03        3  8.50788e+09      3.2e+07          1      3.2e+07
!  04        4  8.53988e+09      3.2e+07          1      3.2e+07
!  05        5  8.60388e+09      3.2e+07          1      3.2e+07
!  06        6  8.63588e+09      3.2e+07          1      3.2e+07
!  07        7  8.69988e+09      3.2e+07          1      3.2e+07
!  08        8  8.73188e+09      3.2e+07          1      3.2e+07
!  09        9  8.79588e+09      3.2e+07          1      3.2e+07
!  10       10  8.82788e+09      3.2e+07          1      3.2e+07
!  11       11  8.85988e+09      3.2e+07          1      3.2e+07
!  12       12  8.89188e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 364 lines of history.
! 
! Reading 14184 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@muppet J2139+1423_X_2014_12_20_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 17 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 17 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 17 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 17 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 17 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 17 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 17 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 17 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 17 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 17 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 17 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 17 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.809826Jy  sigma=0.009565
! Fit after  self-cal, rms=0.798928Jy  sigma=0.009411
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7181 mas, bmaj=1.818 mas, bpa=-6.129 degrees
! Estimated noise=820.184 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.00401 Jy
! Component: 100  -  total flux cleaned = 1.43818 Jy
! Total flux subtracted in 100 components = 1.43818 Jy
! Clean residual min=-0.077156 max=0.203180 Jy/beam
! Clean residual mean=-0.000030 rms=0.025819 Jy/beam
! Combined flux in latest and established models = 1.43818 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 1.43818 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.505507Jy  sigma=0.005584
! Fit after  self-cal, rms=0.503984Jy  sigma=0.005568
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.232096 Jy
! Component: 100  -  total flux cleaned = 0.363801 Jy
! Total flux subtracted in 100 components = 0.363801 Jy
! Clean residual min=-0.059014 max=0.110285 Jy/beam
! Clean residual mean=-0.000116 rms=0.016186 Jy/beam
! Combined flux in latest and established models = 1.80198 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 17 components and 1.80198 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.344109Jy  sigma=0.003381
! Fit after  self-cal, rms=0.343324Jy  sigma=0.003371
! Inverting map 
! Added new window around map position (-1, -0.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.105501 Jy
! Component: 100  -  total flux cleaned = 0.160829 Jy
! Total flux subtracted in 100 components = 0.160829 Jy
! Clean residual min=-0.059352 max=0.062733 Jy/beam
! Clean residual mean=-0.000146 rms=0.013604 Jy/beam
! Combined flux in latest and established models = 1.96281 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 24 components and 1.96281 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.302022Jy  sigma=0.002885
! Fit after  self-cal, rms=0.299836Jy  sigma=0.002852
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.873 mas, bmaj=2.091 mas, bpa=-5.974 degrees
! Estimated noise=502.245 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0371373 Jy
! Component: 100  -  total flux cleaned = 0.0478114 Jy
! Component: 150  -  total flux cleaned = 0.055936 Jy
! Component: 200  -  total flux cleaned = 0.0567553 Jy
! Total flux subtracted in 200 components = 0.0567553 Jy
! Clean residual min=-0.058623 max=0.061111 Jy/beam
! Clean residual mean=0.000060 rms=0.013807 Jy/beam
! Combined flux in latest and established models = 2.01957 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 39 components and 2.01957 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.283884Jy  sigma=0.002744
! Fit after  self-cal, rms=0.283248Jy  sigma=0.002736
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.80     FD        1.06     HN        1.03     KP        1.12     
!   LA        0.98     MK        0.97     NL        0.95     OV        0.96     
!   PT        1.03     SC        1.11     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.80     FD        1.07     HN        1.05     KP        1.06     
!   LA        0.98     MK        0.96     NL        0.95     OV        0.96     
!   PT        0.99     SC        1.11     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.81     FD        1.06     HN        1.06     KP        1.00     
!   LA        1.01     MK        0.97     NL        0.95     OV        0.96     
!   PT        0.96     SC        1.11     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.81     FD        1.05     HN        1.04     KP        0.96     
!   LA        1.01     MK        0.97     NL        0.95     OV        0.95     
!   PT        0.98     SC        1.11     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.82     FD        1.05     HN        1.01     KP        0.91     
!   LA        1.00     MK        0.99     NL        0.97     OV        0.97     
!   PT        0.98     SC        1.11     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.86     FD        1.10     HN        1.05     KP        0.91     
!   LA        1.01     MK        0.97     NL        0.98     OV        0.99     
!   PT        0.97     SC        1.11     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.90     FD        1.19     HN        1.18     KP        0.90     
!   LA        1.02     MK        1.03     NL        1.01     OV        1.03     
!   PT        1.05     SC        1.19     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.84     FD        1.12     HN        1.12     KP        0.91     
!   LA        1.00     MK        0.98     NL        0.97     OV        1.01     
!   PT        0.99     SC        1.14     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.87     FD        1.08     HN        1.11     KP        0.94     
!   LA        1.02     MK        0.96     NL        0.97     OV        1.00     
!   PT        1.00     SC        1.09     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.85     FD        1.08     HN        1.10     KP        0.97     
!   LA        1.03     MK        0.98     NL        0.97     OV        1.00     
!   PT        1.00     SC        1.08     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.85     FD        1.09     HN        1.09     KP        1.02     
!   LA        1.03     MK        1.00     NL        0.98     OV        0.99     
!   PT        1.00     SC        1.11     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.86     FD        1.09     HN        1.05     KP        1.06     
!   LA        1.02     MK        0.99     NL        0.98     OV        1.00     
!   PT        1.02     SC        1.11     
! 
! 
! Fit before self-cal, rms=0.283248Jy  sigma=0.002736
! Fit after  self-cal, rms=0.190035Jy  sigma=0.002004
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8827 mas, bmaj=2.098 mas, bpa=-6.734 degrees
! Estimated noise=502.953 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00947344 Jy
! Component: 100  -  total flux cleaned = 0.013802 Jy
! Component: 150  -  total flux cleaned = 0.0142263 Jy
! Component: 200  -  total flux cleaned = 0.014989 Jy
! Total flux subtracted in 200 components = 0.014989 Jy
! Clean residual min=-0.038934 max=0.046274 Jy/beam
! Clean residual mean=0.000125 rms=0.010308 Jy/beam
! Combined flux in latest and established models = 2.03456 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 50 components and 2.03456 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.186979Jy  sigma=0.001971
! Fit after  self-cal, rms=0.186800Jy  sigma=0.001969
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.186800Jy  sigma=0.001969
! Fit after  self-cal, rms=0.089781Jy  sigma=0.000951
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8785 mas, bmaj=2.094 mas, bpa=-6.623 degrees
! Estimated noise=501.042 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00359812 Jy
! Component: 100  -  total flux cleaned = 0.00149381 Jy
! Component: 150  -  total flux cleaned = 0.000330192 Jy
! Component: 200  -  total flux cleaned = 8.03688e-05 Jy
! Total flux subtracted in 200 components = 8.03688e-05 Jy
! Clean residual min=-0.010154 max=0.009019 Jy/beam
! Clean residual mean=0.000002 rms=0.002140 Jy/beam
! Combined flux in latest and established models = 2.03464 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 56 components and 2.03464 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086493Jy  sigma=0.000912
! Fit after  self-cal, rms=0.085933Jy  sigma=0.000905
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0010937 Jy
! Component: 100  -  total flux cleaned = 0.00108443 Jy
! Component: 150  -  total flux cleaned = 0.000876778 Jy
! Component: 200  -  total flux cleaned = 0.000695067 Jy
! Total flux subtracted in 200 components = 0.000695067 Jy
! Clean residual min=-0.008504 max=0.008196 Jy/beam
! Clean residual mean=0.000004 rms=0.001929 Jy/beam
! Combined flux in latest and established models = 2.03533 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 63 components and 2.03533 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.084551Jy  sigma=0.000890
! Fit after  self-cal, rms=0.084327Jy  sigma=0.000887
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.084327Jy  sigma=0.000887
! Fit after  self-cal, rms=0.083718Jy  sigma=0.000880
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8787 mas, bmaj=2.093 mas, bpa=-6.607 degrees
! Estimated noise=500.936 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000875266 Jy
! Component: 100  -  total flux cleaned = 0.00043501 Jy
! Component: 150  -  total flux cleaned = 8.67948e-05 Jy
! Component: 200  -  total flux cleaned = 0.000244225 Jy
! Total flux subtracted in 200 components = 0.000244225 Jy
! Clean residual min=-0.008210 max=0.007476 Jy/beam
! Clean residual mean=0.000002 rms=0.001620 Jy/beam
! Combined flux in latest and established models = 2.03557 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 67 components and 2.03557 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082474Jy  sigma=0.000866
! Fit after  self-cal, rms=0.082222Jy  sigma=0.000863
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000612365 Jy
! Component: 100  -  total flux cleaned = 0.000293655 Jy
! Component: 150  -  total flux cleaned = 0.00014756 Jy
! Component: 200  -  total flux cleaned = 1.69845e-05 Jy
! Total flux subtracted in 200 components = 1.69845e-05 Jy
! Clean residual min=-0.006943 max=0.006905 Jy/beam
! Clean residual mean=0.000003 rms=0.001495 Jy/beam
! Combined flux in latest and established models = 2.03559 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 69 components and 2.03559 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081476Jy  sigma=0.000855
! Fit after  self-cal, rms=0.081321Jy  sigma=0.000853
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081321Jy  sigma=0.000853
! Fit after  self-cal, rms=0.081160Jy  sigma=0.000851
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.18 mas, bmaj=3.121 mas, bpa=-4.871 degrees
! Estimated noise=608.855 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000554342 Jy
! Component: 100  -  total flux cleaned = 0.000533826 Jy
! Component: 150  -  total flux cleaned = 0.000790756 Jy
! Component: 200  -  total flux cleaned = 0.0009328 Jy
! Total flux subtracted in 200 components = 0.0009328 Jy
! Clean residual min=-0.003763 max=0.007061 Jy/beam
! Clean residual mean=0.000004 rms=0.001360 Jy/beam
! Combined flux in latest and established models = 2.03652 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 75 components and 2.03652 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080896Jy  sigma=0.000849
! Fit after  self-cal, rms=0.080786Jy  sigma=0.000847
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.6, -6.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00591281 Jy
! Component: 100  -  total flux cleaned = 0.00828987 Jy
! Component: 150  -  total flux cleaned = 0.00944193 Jy
! Component: 200  -  total flux cleaned = 0.0102858 Jy
! Total flux subtracted in 200 components = 0.0102858 Jy
! Clean residual min=-0.002984 max=0.003481 Jy/beam
! Clean residual mean=0.000004 rms=0.000974 Jy/beam
! Combined flux in latest and established models = 2.04681 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 102 components and 2.04681 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080377Jy  sigma=0.000841
! Fit after  self-cal, rms=0.080357Jy  sigma=0.000840
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8787 mas, bmaj=2.092 mas, bpa=-6.585 degrees
! Estimated noise=500.869 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8787 x 2.092 at -6.585 degrees (North through East)
! Clean map  min=-0.0051119  max=1.3252 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080357Jy  sigma=0.000840
! Fit after  self-cal, rms=0.073357Jy  sigma=0.000766
! Inverting map and beam 
! Estimated beam: bmin=0.8795 mas, bmaj=2.092 mas, bpa=-6.535 degrees
! Estimated noise=501.139 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00242169 Jy
! Component: 100  -  total flux cleaned = 0.00283258 Jy
! Component: 150  -  total flux cleaned = 0.0033646 Jy
! Component: 200  -  total flux cleaned = 0.00352421 Jy
! Total flux subtracted in 200 components = 0.00352421 Jy
! Clean residual min=-0.005264 max=0.004212 Jy/beam
! Clean residual mean=0.000003 rms=0.001032 Jy/beam
! Combined flux in latest and established models = 2.05033 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 124 components and 2.05033 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072287Jy  sigma=0.000754
! Fit after  self-cal, rms=0.072275Jy  sigma=0.000754
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000641913 Jy
! Component: 100  -  total flux cleaned = 0.000934804 Jy
! Component: 150  -  total flux cleaned = 0.00121665 Jy
! Component: 200  -  total flux cleaned = 0.00174987 Jy
! Total flux subtracted in 200 components = 0.00174987 Jy
! Clean residual min=-0.004637 max=0.003918 Jy/beam
! Clean residual mean=0.000003 rms=0.000931 Jy/beam
! Combined flux in latest and established models = 2.05208 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 135 components and 2.05208 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071677Jy  sigma=0.000748
! Fit after  self-cal, rms=0.071670Jy  sigma=0.000747
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071670Jy  sigma=0.000747
! Fit after  self-cal, rms=0.071603Jy  sigma=0.000747
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7241 mas, bmaj=1.82 mas, bpa=-6.77 degrees
! Estimated noise=821.52 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.00111 Jy
! Component: 100  -  total flux cleaned = 1.43551 Jy
! Component: 150  -  total flux cleaned = 1.67313 Jy
! Component: 200  -  total flux cleaned = 1.81126 Jy
! Total flux subtracted in 200 components = 1.81126 Jy
! Clean residual min=-0.026615 max=0.069161 Jy/beam
! Clean residual mean=0.000043 rms=0.008190 Jy/beam
! Combined flux in latest and established models = 1.81126 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 1.81126 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8788 mas, bmaj=2.091 mas, bpa=-6.541 degrees
! Estimated noise=500.762 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.101721 Jy
! Component: 100  -  total flux cleaned = 0.15258 Jy
! Component: 150  -  total flux cleaned = 0.181378 Jy
! Component: 200  -  total flux cleaned = 0.199567 Jy
! Total flux subtracted in 200 components = 0.199567 Jy
! Clean residual min=-0.005766 max=0.011954 Jy/beam
! Clean residual mean=-0.000017 rms=0.001843 Jy/beam
! Combined flux in latest and established models = 2.01083 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 39 components and 2.01083 Jy
! Inverting map 
! Added new window around map position (1, 0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0127472 Jy
! Component: 100  -  total flux cleaned = 0.0216682 Jy
! Component: 150  -  total flux cleaned = 0.0267206 Jy
! Component: 200  -  total flux cleaned = 0.029305 Jy
! Total flux subtracted in 200 components = 0.029305 Jy
! Clean residual min=-0.004199 max=0.004680 Jy/beam
! Clean residual mean=0.000003 rms=0.001085 Jy/beam
! Combined flux in latest and established models = 2.04013 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 64 components and 2.04013 Jy
! Inverting map 
! Added new window around map position (1, 5.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00309749 Jy
! Component: 100  -  total flux cleaned = 0.00497575 Jy
! Component: 150  -  total flux cleaned = 0.00633798 Jy
! Component: 200  -  total flux cleaned = 0.00726554 Jy
! Total flux subtracted in 200 components = 0.00726554 Jy
! Clean residual min=-0.003405 max=0.003583 Jy/beam
! Clean residual mean=0.000004 rms=0.000890 Jy/beam
! Combined flux in latest and established models = 2.0474 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 83 components and 2.0474 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.179 mas, bmaj=3.12 mas, bpa=-4.771 degrees
! Estimated noise=608.877 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00317042 Jy
! Component: 100  -  total flux cleaned = 0.0042546 Jy
! Component: 150  -  total flux cleaned = 0.0043375 Jy
! Component: 200  -  total flux cleaned = 0.0044728 Jy
! Total flux subtracted in 200 components = 0.0044728 Jy
! Clean residual min=-0.002439 max=0.002911 Jy/beam
! Clean residual mean=0.000011 rms=0.000755 Jy/beam
! Combined flux in latest and established models = 2.05187 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.04628e-05 Jy
! Component: 100  -  total flux cleaned = 0.000174101 Jy
! Component: 150  -  total flux cleaned = 0.000386701 Jy
! Component: 200  -  total flux cleaned = 0.000486134 Jy
! Total flux subtracted in 200 components = 0.000486134 Jy
! Clean residual min=-0.002246 max=0.002770 Jy/beam
! Clean residual mean=0.000011 rms=0.000701 Jy/beam
! Combined flux in latest and established models = 2.05236 Jy
! Adding 50 model components to the UV plane model.
! The established model now contains 130 components and 2.05236 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8788 mas, bmaj=2.091 mas, bpa=-6.541 degrees
! Estimated noise=500.762 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000588873 Jy
! Component: 100  -  total flux cleaned = -0.00047108 Jy
! Component: 150  -  total flux cleaned = 9.21685e-05 Jy
! Component: 200  -  total flux cleaned = 0.000410379 Jy
! Total flux subtracted in 200 components = 0.000410379 Jy
! Clean residual min=-0.002652 max=0.003203 Jy/beam
! Clean residual mean=0.000005 rms=0.000717 Jy/beam
! Combined flux in latest and established models = 2.05277 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 146 components and 2.05277 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070429Jy  sigma=0.000736
! Fit after  self-cal, rms=0.070232Jy  sigma=0.000733
wmodel J2139+1423_X_2014_12_20_pus_map.mod
! Writing 146 model components to file: J2139+1423_X_2014_12_20_pus_map.mod
wobs J2139+1423_X_2014_12_20_pus_uvs.fits
! Writing UV FITS file: J2139+1423_X_2014_12_20_pus_uvs.fits
wwins J2139+1423_X_2014_12_20_pus_map.win
! wwins: Wrote 5 windows to J2139+1423_X_2014_12_20_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000248492 Jy
! Component: 100  -  total flux cleaned = 0.000627711 Jy
! Component: 150  -  total flux cleaned = 0.00103947 Jy
! Component: 200  -  total flux cleaned = 0.00151733 Jy
! Component: 250  -  total flux cleaned = 0.00176642 Jy
! Component: 300  -  total flux cleaned = 0.00196667 Jy
! Component: 350  -  total flux cleaned = 0.00220016 Jy
! Component: 400  -  total flux cleaned = 0.0024267 Jy
! Component: 450  -  total flux cleaned = 0.00275738 Jy
! Component: 500  -  total flux cleaned = 0.00307963 Jy
! Component: 550  -  total flux cleaned = 0.00328943 Jy
! Component: 600  -  total flux cleaned = 0.00349453 Jy
! Component: 650  -  total flux cleaned = 0.00366157 Jy
! Component: 700  -  total flux cleaned = 0.00392316 Jy
! Component: 750  -  total flux cleaned = 0.00418001 Jy
! Component: 800  -  total flux cleaned = 0.00440034 Jy
! Component: 850  -  total flux cleaned = 0.00464809 Jy
! Component: 900  -  total flux cleaned = 0.00492208 Jy
! Component: 950  -  total flux cleaned = 0.00516221 Jy
! Component: 1000  -  total flux cleaned = 0.00539733 Jy
! Component: 1050  -  total flux cleaned = 0.00554154 Jy
! Component: 1100  -  total flux cleaned = 0.00574108 Jy
! Component: 1150  -  total flux cleaned = 0.00588072 Jy
! Component: 1200  -  total flux cleaned = 0.00599073 Jy
! Component: 1250  -  total flux cleaned = 0.0061539 Jy
! Component: 1300  -  total flux cleaned = 0.00628759 Jy
! Component: 1350  -  total flux cleaned = 0.00647172 Jy
! Component: 1400  -  total flux cleaned = 0.00660104 Jy
! Component: 1450  -  total flux cleaned = 0.0066521 Jy
! Component: 1500  -  total flux cleaned = 0.00682848 Jy
! Component: 1550  -  total flux cleaned = 0.00695326 Jy
! Component: 1600  -  total flux cleaned = 0.0071741 Jy
! Component: 1650  -  total flux cleaned = 0.00731926 Jy
! Component: 1700  -  total flux cleaned = 0.00743825 Jy
! Component: 1750  -  total flux cleaned = 0.00757962 Jy
! Component: 1800  -  total flux cleaned = 0.00769587 Jy
! Component: 1850  -  total flux cleaned = 0.00781105 Jy
! Component: 1900  -  total flux cleaned = 0.00792395 Jy
! Component: 1950  -  total flux cleaned = 0.00803562 Jy
! Component: 2000  -  total flux cleaned = 0.00812387 Jy
! Total flux subtracted in 2048 components = 0.00825484 Jy
! Clean residual min=-0.001299 max=0.001087 Jy/beam
! Clean residual mean=0.000003 rms=0.000390 Jy/beam
! Combined flux in latest and established models = 2.06102 Jy
keep
! Adding 137 model components to the UV plane model.
! The established model now contains 280 components and 2.06102 Jy
![Exited script file: muppet]
wmap "J2139+1423_X_2014_12_20_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8788 x 2.091 at -6.541 degrees (North through East)
! Clean map  min=-0.0027771  max=1.3263 Jy/beam
! Writing clean map to FITS file: J2139+1423_X_2014_12_20_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 1.32631 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000388193 
device "J2139+1423_X_2014_12_20_pus\_map.eps/VPS"
! Attempting to open device: 'J2139+1423_X_2014_12_20_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.0878059 0.0878059 0.175612 0.351223 0.702447 1.40489 2.80979 5.61958 11.2392 22.4783 44.9566 89.9132
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0011 
print "peak=",int(1000*peak_flux)/1000
! peak= 1.326 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8788 x 2.091 at -6.541 degrees (North through East)
! Clean map  min=-0.0027771  max=1.3263 Jy/beam
quit
! Quitting program
! Log file J2139+1423_X_2014_12_20_pus_uvs.log closed on Tue Dec 27 21:51:24 2016