! Started logfile: J2043+1255_S_2014_12_20_pus_uvs.log on Wed Dec 28 13:45:54 2016 obs J2043+1255_S_2014_12_20_pus_uva.fits ! Reading UV FITS file: J2043+1255_S_2014_12_20_pus_uva.fits ! AN table 1: 83 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.772691 visibilities/baseline/integration-bin. ! Found source: J2043+1255 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 344 lines of history. ! ! Reading 11544 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2043+1255_S_2014_12_20_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.949508Jy sigma=0.010736 ! Fit after self-cal, rms=0.933146Jy sigma=0.010578 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.916 mas, bmaj=8 mas, bpa=-9.096 degrees ! Estimated noise=952.807 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0518274 Jy ! Component: 100 - total flux cleaned = 0.0648488 Jy ! Total flux subtracted in 100 components = 0.0648488 Jy ! Clean residual min=-0.003926 max=0.005240 Jy/beam ! Clean residual mean=0.000012 rms=0.001034 Jy/beam ! Combined flux in latest and established models = 0.0648488 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0648488 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075082Jy sigma=0.000791 ! Fit after self-cal, rms=0.075068Jy sigma=0.000791 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.707 mas, bmaj=9.014 mas, bpa=-9.924 degrees ! Estimated noise=591.256 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0071325 Jy ! Component: 100 - total flux cleaned = 0.0108576 Jy ! Component: 150 - total flux cleaned = 0.0130712 Jy ! Component: 200 - total flux cleaned = 0.014486 Jy ! Total flux subtracted in 200 components = 0.014486 Jy ! Clean residual min=-0.003268 max=0.004304 Jy/beam ! Clean residual mean=0.000009 rms=0.000868 Jy/beam ! Combined flux in latest and established models = 0.0793348 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 55 components and 0.0793348 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074309Jy sigma=0.000784 ! Fit after self-cal, rms=0.074313Jy sigma=0.000784 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.90 HN 0.97 KP 1.07 ! LA 0.94 MK 1.08 NL 0.92 OV 1.02 ! PT 1.02 SC 0.84 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.11 HN 1.03 KP 1.00 ! LA 0.87 MK 1.05 NL 1.05 OV 1.09 ! PT 0.99 SC 0.94 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.22 HN 1.03 KP 0.90 ! LA 0.74 MK 1.03 NL 1.29 OV 1.02 ! PT 0.98 SC 1.10 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 1.08 HN 0.95 KP 0.87 ! LA 0.82 MK 1.06 NL 1.02 OV 1.03 ! PT 0.95 SC 1.00 ! ! ! Fit before self-cal, rms=0.074313Jy sigma=0.000784 ! Fit after self-cal, rms=0.072871Jy sigma=0.000776 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.746 mas, bmaj=9.121 mas, bpa=-9.484 degrees ! Estimated noise=592.503 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (14, -15). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00344066 Jy ! Component: 100 - total flux cleaned = 0.00527941 Jy ! Component: 150 - total flux cleaned = 0.00627779 Jy ! Component: 200 - total flux cleaned = 0.0068768 Jy ! Total flux subtracted in 200 components = 0.0068768 Jy ! Clean residual min=-0.002098 max=0.002048 Jy/beam ! Clean residual mean=-0.000001 rms=0.000521 Jy/beam ! Combined flux in latest and established models = 0.0862116 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 87 components and 0.0862116 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072697Jy sigma=0.000774 ! Fit after self-cal, rms=0.072704Jy sigma=0.000773 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072704Jy sigma=0.000773 ! Fit after self-cal, rms=0.072027Jy sigma=0.000772 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.741 mas, bmaj=9.134 mas, bpa=-9.371 degrees ! Estimated noise=587.967 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00152408 Jy ! Component: 100 - total flux cleaned = 0.00215137 Jy ! Component: 150 - total flux cleaned = 0.00250988 Jy ! Component: 200 - total flux cleaned = 0.00269989 Jy ! Total flux subtracted in 200 components = 0.00269989 Jy ! Clean residual min=-0.001955 max=0.001658 Jy/beam ! Clean residual mean=-0.000001 rms=0.000449 Jy/beam ! Combined flux in latest and established models = 0.0889115 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 105 components and 0.0889115 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071982Jy sigma=0.000771 ! Fit after self-cal, rms=0.071983Jy sigma=0.000771 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000470554 Jy ! Component: 100 - total flux cleaned = 0.000619595 Jy ! Component: 150 - total flux cleaned = 0.000753618 Jy ! Component: 200 - total flux cleaned = 0.00089314 Jy ! Total flux subtracted in 200 components = 0.00089314 Jy ! Clean residual min=-0.001907 max=0.001673 Jy/beam ! Clean residual mean=-0.000001 rms=0.000443 Jy/beam ! Combined flux in latest and established models = 0.0898046 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 116 components and 0.0898046 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071967Jy sigma=0.000771 ! Fit after self-cal, rms=0.071963Jy sigma=0.000771 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071963Jy sigma=0.000771 ! Fit after self-cal, rms=0.071840Jy sigma=0.000771 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.736 mas, bmaj=9.145 mas, bpa=-9.303 degrees ! Estimated noise=586.669 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000595492 Jy ! Component: 100 - total flux cleaned = 0.000835639 Jy ! Component: 150 - total flux cleaned = 0.00100083 Jy ! Component: 200 - total flux cleaned = 0.00109139 Jy ! Total flux subtracted in 200 components = 0.00109139 Jy ! Clean residual min=-0.001828 max=0.001626 Jy/beam ! Clean residual mean=-0.000001 rms=0.000426 Jy/beam ! Combined flux in latest and established models = 0.090896 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 123 components and 0.0908961 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071825Jy sigma=0.000771 ! Fit after self-cal, rms=0.071822Jy sigma=0.000771 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0001932 Jy ! Component: 100 - total flux cleaned = 0.000261631 Jy ! Component: 150 - total flux cleaned = 0.000339583 Jy ! Component: 200 - total flux cleaned = 0.000397529 Jy ! Total flux subtracted in 200 components = 0.000397529 Jy ! Clean residual min=-0.001811 max=0.001642 Jy/beam ! Clean residual mean=-0.000001 rms=0.000423 Jy/beam ! Combined flux in latest and established models = 0.0912936 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 128 components and 0.0912936 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071815Jy sigma=0.000771 ! Fit after self-cal, rms=0.071813Jy sigma=0.000771 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071813Jy sigma=0.000771 ! Fit after self-cal, rms=0.071823Jy sigma=0.000770 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.949 mas, bmaj=12.01 mas, bpa=-8.594 degrees ! Estimated noise=684.863 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000633304 Jy ! Component: 100 - total flux cleaned = 0.000897368 Jy ! Component: 150 - total flux cleaned = 0.00108269 Jy ! Component: 200 - total flux cleaned = 0.00111064 Jy ! Total flux subtracted in 200 components = 0.00111064 Jy ! Clean residual min=-0.001620 max=0.001675 Jy/beam ! Clean residual mean=-0.000002 rms=0.000473 Jy/beam ! Combined flux in latest and established models = 0.0924042 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 147 components and 0.0924042 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071818Jy sigma=0.000770 ! Fit after self-cal, rms=0.071814Jy sigma=0.000770 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.77547e-05 Jy ! Component: 100 - total flux cleaned = 0.000214905 Jy ! Component: 150 - total flux cleaned = 0.000252291 Jy ! Component: 200 - total flux cleaned = 0.000252257 Jy ! Total flux subtracted in 200 components = 0.000252257 Jy ! Clean residual min=-0.001614 max=0.001652 Jy/beam ! Clean residual mean=-0.000003 rms=0.000473 Jy/beam ! Combined flux in latest and established models = 0.0926565 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 150 components and 0.0926565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071813Jy sigma=0.000770 ! Fit after self-cal, rms=0.071810Jy sigma=0.000770 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.735 mas, bmaj=9.148 mas, bpa=-9.202 degrees ! Estimated noise=586.375 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.735 x 9.148 at -9.202 degrees (North through East) ! Clean map min=-0.0016476 max=0.067319 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.927 mas, bmaj=8.071 mas, bpa=-8.495 degrees ! Estimated noise=942.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.051079 Jy ! Component: 100 - total flux cleaned = 0.0645892 Jy ! Component: 150 - total flux cleaned = 0.070668 Jy ! Component: 200 - total flux cleaned = 0.0746578 Jy ! Total flux subtracted in 200 components = 0.0746578 Jy ! Clean residual min=-0.002855 max=0.003381 Jy/beam ! Clean residual mean=0.000007 rms=0.000766 Jy/beam ! Combined flux in latest and established models = 0.0746578 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.0746578 Jy ! Inverting map and beam ! Estimated beam: bmin=3.735 mas, bmaj=9.148 mas, bpa=-9.202 degrees ! Estimated noise=586.375 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.5, -6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00404903 Jy ! Component: 100 - total flux cleaned = 0.00691569 Jy ! Component: 150 - total flux cleaned = 0.00915874 Jy ! Component: 200 - total flux cleaned = 0.0109527 Jy ! Total flux subtracted in 200 components = 0.0109527 Jy ! Clean residual min=-0.001849 max=0.001797 Jy/beam ! Clean residual mean=0.000004 rms=0.000470 Jy/beam ! Combined flux in latest and established models = 0.0856105 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 78 components and 0.0856104 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.949 mas, bmaj=12.01 mas, bpa=-8.594 degrees ! Estimated noise=684.863 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00205138 Jy ! Component: 100 - total flux cleaned = 0.00346963 Jy ! Component: 150 - total flux cleaned = 0.00454147 Jy ! Component: 200 - total flux cleaned = 0.00536372 Jy ! Total flux subtracted in 200 components = 0.00536372 Jy ! Clean residual min=-0.001735 max=0.001686 Jy/beam ! Clean residual mean=-0.000000 rms=0.000490 Jy/beam ! Combined flux in latest and established models = 0.0909742 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000543122 Jy ! Component: 100 - total flux cleaned = 0.000862117 Jy ! Component: 150 - total flux cleaned = 0.00102722 Jy ! Component: 200 - total flux cleaned = 0.00115828 Jy ! Total flux subtracted in 200 components = 0.00115828 Jy ! Clean residual min=-0.001656 max=0.001685 Jy/beam ! Clean residual mean=-0.000002 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 0.0921324 Jy ! Adding 73 model components to the UV plane model. ! The established model now contains 150 components and 0.0921325 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.735 mas, bmaj=9.148 mas, bpa=-9.202 degrees ! Estimated noise=586.375 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000149038 Jy ! Component: 100 - total flux cleaned = 0.00014958 Jy ! Component: 150 - total flux cleaned = 0.000127786 Jy ! Component: 200 - total flux cleaned = 0.000149013 Jy ! Total flux subtracted in 200 components = 0.000149013 Jy ! Clean residual min=-0.001580 max=0.001548 Jy/beam ! Clean residual mean=-0.000001 rms=0.000407 Jy/beam ! Combined flux in latest and established models = 0.0922815 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 169 components and 0.0922815 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071799Jy sigma=0.000770 ! Fit after self-cal, rms=0.071790Jy sigma=0.000770 wmodel J2043+1255_S_2014_12_20_pus_map.mod ! Writing 169 model components to file: J2043+1255_S_2014_12_20_pus_map.mod wobs J2043+1255_S_2014_12_20_pus_uvs.fits ! Writing UV FITS file: J2043+1255_S_2014_12_20_pus_uvs.fits wwins J2043+1255_S_2014_12_20_pus_map.win ! wwins: Wrote 3 windows to J2043+1255_S_2014_12_20_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 5.84476e-05 Jy ! Component: 100 - total flux cleaned = 0.000141034 Jy ! Component: 150 - total flux cleaned = 6.35894e-05 Jy ! Component: 200 - total flux cleaned = -1.0408e-05 Jy ! Component: 250 - total flux cleaned = -0.000107586 Jy ! Component: 300 - total flux cleaned = -0.000249103 Jy ! Component: 350 - total flux cleaned = -0.000363403 Jy ! Component: 400 - total flux cleaned = -0.000474918 Jy ! Component: 450 - total flux cleaned = -0.000518493 Jy ! Component: 500 - total flux cleaned = -0.000624494 Jy ! Component: 550 - total flux cleaned = -0.000603516 Jy ! Component: 600 - total flux cleaned = -0.000603652 Jy ! Component: 650 - total flux cleaned = -0.000702783 Jy ! Component: 700 - total flux cleaned = -0.000702791 Jy ! Component: 750 - total flux cleaned = -0.000779269 Jy ! Component: 800 - total flux cleaned = -0.000798291 Jy ! Component: 850 - total flux cleaned = -0.000889927 Jy ! Component: 900 - total flux cleaned = -0.00088956 Jy ! Component: 950 - total flux cleaned = -0.000924647 Jy ! Component: 1000 - total flux cleaned = -0.000889775 Jy ! Component: 1050 - total flux cleaned = -0.000890088 Jy ! Component: 1100 - total flux cleaned = -0.00090717 Jy ! Component: 1150 - total flux cleaned = -0.000923631 Jy ! Component: 1200 - total flux cleaned = -0.000841959 Jy ! Component: 1250 - total flux cleaned = -0.000874352 Jy ! Component: 1300 - total flux cleaned = -0.000811036 Jy ! Component: 1350 - total flux cleaned = -0.000873269 Jy ! Component: 1400 - total flux cleaned = -0.000811659 Jy ! Component: 1450 - total flux cleaned = -0.000827053 Jy ! Component: 1500 - total flux cleaned = -0.000796994 Jy ! Component: 1550 - total flux cleaned = -0.000797222 Jy ! Component: 1600 - total flux cleaned = -0.000826457 Jy ! Component: 1650 - total flux cleaned = -0.00081205 Jy ! Component: 1700 - total flux cleaned = -0.000826203 Jy ! Component: 1750 - total flux cleaned = -0.000783864 Jy ! Component: 1800 - total flux cleaned = -0.000783921 Jy ! Component: 1850 - total flux cleaned = -0.00078387 Jy ! Component: 1900 - total flux cleaned = -0.0007567 Jy ! Component: 1950 - total flux cleaned = -0.00070342 Jy ! Component: 2000 - total flux cleaned = -0.000690374 Jy ! Component: 2050 - total flux cleaned = -0.00063835 Jy ! Component: 2100 - total flux cleaned = -0.000664048 Jy ! Component: 2150 - total flux cleaned = -0.000600346 Jy ! Component: 2200 - total flux cleaned = -0.000587883 Jy ! Component: 2250 - total flux cleaned = -0.000563056 Jy ! Component: 2300 - total flux cleaned = -0.000538538 Jy ! Component: 2350 - total flux cleaned = -0.000526478 Jy ! Component: 2400 - total flux cleaned = -0.000502353 Jy ! Component: 2450 - total flux cleaned = -0.000526215 Jy ! Component: 2500 - total flux cleaned = -0.000526103 Jy ! Component: 2550 - total flux cleaned = -0.000479298 Jy ! Component: 2600 - total flux cleaned = -0.000433151 Jy ! Component: 2650 - total flux cleaned = -0.000456077 Jy ! Component: 2700 - total flux cleaned = -0.000410867 Jy ! Component: 2750 - total flux cleaned = -0.000410819 Jy ! Component: 2800 - total flux cleaned = -0.00036661 Jy ! Component: 2850 - total flux cleaned = -0.000344648 Jy ! Component: 2900 - total flux cleaned = -0.000323012 Jy ! Component: 2950 - total flux cleaned = -0.000301673 Jy ! Component: 3000 - total flux cleaned = -0.000312109 Jy ! Component: 3050 - total flux cleaned = -0.000259351 Jy ! Component: 3100 - total flux cleaned = -0.000238495 Jy ! Component: 3150 - total flux cleaned = -0.00022811 Jy ! Component: 3200 - total flux cleaned = -0.000166605 Jy ! Component: 3250 - total flux cleaned = -0.000156448 Jy ! Component: 3300 - total flux cleaned = -0.000126073 Jy ! Component: 3350 - total flux cleaned = -3.6337e-05 Jy ! Component: 3400 - total flux cleaned = -6.60601e-05 Jy ! Component: 3450 - total flux cleaned = -1.70597e-05 Jy ! Component: 3500 - total flux cleaned = 3.15026e-05 Jy ! Component: 3550 - total flux cleaned = 7.00644e-05 Jy ! Component: 3600 - total flux cleaned = 7.95264e-05 Jy ! Component: 3650 - total flux cleaned = 0.000136617 Jy ! Component: 3700 - total flux cleaned = 0.00017421 Jy ! Component: 3750 - total flux cleaned = 0.000192943 Jy ! Component: 3800 - total flux cleaned = 0.000220755 Jy ! Component: 3850 - total flux cleaned = 0.000239194 Jy ! Component: 3900 - total flux cleaned = 0.000239262 Jy ! Component: 3950 - total flux cleaned = 0.000275496 Jy ! Component: 4000 - total flux cleaned = 0.000293337 Jy ! Component: 4050 - total flux cleaned = 0.000311074 Jy ! Total flux subtracted in 4096 components = 0.000302127 Jy ! Clean residual min=-0.000502 max=0.000497 Jy/beam ! Clean residual mean=0.000000 rms=0.000163 Jy/beam ! Combined flux in latest and established models = 0.0925836 Jy keep ! Adding 267 model components to the UV plane model. ! The established model now contains 436 components and 0.0925836 Jy ![Exited script file: muppet] wmap "J2043+1255_S_2014_12_20_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.735 x 9.148 at -9.202 degrees (North through East) ! Clean map min=-0.0012082 max=0.067073 Jy/beam ! Writing clean map to FITS file: J2043+1255_S_2014_12_20_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0670732 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000161462 device "J2043+1255_S_2014_12_20_pus\_map.eps/VPS" ! Attempting to open device: 'J2043+1255_S_2014_12_20_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.722175 0.722175 1.44435 2.8887 5.7774 11.5548 23.1096 46.2192 92.4384 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.067 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.735 x 9.148 at -9.202 degrees (North through East) ! Clean map min=-0.0012082 max=0.067073 Jy/beam quit ! Quitting program ! Log file J2043+1255_S_2014_12_20_pus_uvs.log closed on Wed Dec 28 13:45:59 2016